Geysers , Electrician and ACP Sheet with Electrical Work for Improvement of Grave yard near Prakash Asian Mall in Kalaburagi City of Kalaburagi District , Under the Head of Account K.K.R.D.B. CDQ & General with Code no KLB2512303573 for the year 2025-26

Geysers , Electrician and ACP Sheet with Electrical Work for Improvement of Grave yard near Prakash Asian Mall in Kalaburagi City of Kalaburagi District , Under the Head of Account K.K.R.D.B. CDQ & General with Code no KLB2512303573 for the year 2025-26

Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technica...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

Steel Fabrication

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

Supplying.litres capacity vertical/horizontal type wall mounting Electrical water heater with 22 SWG copper/SS sheet metal inner Container tinned inside and anticorrosive paint outside and 20 SWG M.S....

Erection charges for fixing a . litres capacity wall mounting electric geysers using bolts, flat at one end nut and washers at the other end for through bolts and nuts and washers with 150x450x600mm b...

Fabricating, supplying and erection of . ms long hot dip Galvanized Octagonal hot dip Pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, ...

Fabrication, Supplying, Erection, Testing and Commissioning of ……Mtrs long polygon high mast with Single / Multiple telescopic sections having, (minimum overlap distance of 1.5 times of top sectio...

Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc...

Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyca...

Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete. - Single Arm Bracket with 1500 mm Sta...

Supplying and Fixing of.mm dia class A GI pipe bracket upto 2 ms long bent at suitable angle and fixing to this bracket street light fitting of all capacities to GI or GI or rail or RCC pole / wall us...

Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over

existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires.

Supplying and drawing flexible Multicore Cable Manufactured with electrolytic grade copper with flexible copper with low conductor resistance confirming to table 3class 5 of IS:8130-1984 and (virgin) ...

Supply and laying double walled corrugated (DWC) HDPE Pipe including all necessary connecting Sockets/Couplings/Tees/Bends/End-caps of same materials in existing trench as per IS 14930 part -II suitab...

Supplying of Switch disconnector fuse unit (TPN) HRC type (but without HRC fuses). With AC-23A duty and as per IS-13947. - 63Amps

Supply and fixing of 4 pole power contactor with NO/NC contacts on existing wood/panel board using necessory bolts,nuts,washers and wiring etc., complete with AC-3 Rating and as per IS-13947. - 63 Amp...

Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker [ELMCB] 240/450V up to 300mA sensitivity on existing wood/panel board. - 63 Amps 4 pole

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' cure, indicator ON/OFF, energy cross-3 with Short circuit breaking cappacit...

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. - ...

Supply and Installation /Fixing /Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shock proof, IP65 (Weather Proof), rust proof, dust proof, water pr...

Supplying, fixing and wiring 3 Phase Digital Ammeter / Voltmeter

Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts, nuts and washers

Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5%...

Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5%...

Labour charges for laying of 1.1 KV class UG cable inexisting trench GI pipe / stoneware pipe / on wall / on poleas required.

Digging of trench of 0.6m deep x 0.50 mtr wide refiling the trench to the required ground level and consolidating. [In soil (hard)]

Providing and filling sand in excavated trench to coveralready laid UG cable to a depth of 150mm all-round the cable. Refilling the Cable trench

Supplying fixing and wiring earth electrode for grounding conduits, I.C. cutouts and other equipments on the meter boad using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and sui...

Supplying and fixing of class A (medium duty) GI pipe of wall thickness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV - 50mm