Face lifting of various Blocks, Landscape Development of College Premises Toilets and other Allied Works of Govt. Degree College Tral

Amount

PLASTERING OF BOUNDRY WALL AND FLOORING BACK SIDE OF CLASS ROOM

Site Clearance incl. cutting of bushes Shrubs and stacking of Serviceable material and disposal of unserviceable of material

Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil :

Supplying /filling dry stone soling tightly hand packed under foundation & under floors including all leads, lifts and all carriages up to site of work complete

P/L of cement concrete 1:4:8 mix using 40mm N/size Agg. In foundation /plinth excluding cost of shuttering complete job

Centering and shuttering including strutting ,propping etc. and removal of form work for: foundation, footing ,bases for columns

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. 40 mm thick with 20mm nominal size stone aggregate

15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 fine sand)

REPAIR AND RENOVATION OF CANTEEN, B.C.A.

Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil :

Supplying /filling dry stone soling tightly hand packed under foundation & under floors including all leads, lifts and all carriages up to site of work complete

P/L of cement concrete 1:4:8 mix using 40mm N/size Agg. In foundation /plinth excluding cost of shuttering complete job

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-all work upto plinth level in 1:2:4 mix using 20mm N/size using crushed aggregate including all carriages upto site of work complete

Centering and shuttering including strutting ,propping etc. and removal of form work for: foundation, footing ,bases for columns

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. 40 mm thick with 20mm nominal size stone aggregate

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm

P/F Of steel built up section including cutting welding of columns purlins, rafter trusses & hoisting in position including coat of red oxide work all complete job

Supplying and filling in plinth with fine sand/GSB/Nallah muckh under floors including, watering, ramming, consolidating and dressing complete

P/F Track deck grill make or equivalent H.I rib profiled sheets high tensile S.M.P Galvalume steel. Including side and end Lapp and using 8mm Galvalume hex self-drilling fastener on each crest of sheet for connection with purlins and seam bolts at 300mm centers on all sides and end lappets all complete job

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 KG per SQM, including pointing in white cement mixed with pigment of matching shade complete.

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement prime

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade including wooden base primer

P/L of stainless steel railing of grade 304 with 3 horizontal railing with king post and vertical pipe on each step complete job

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing , polishing and moulding etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

P/L of inter lock cement concrte tile laid on cement mortar of mix 1:4

P/F OF SANITARY ITEMS

A) PVC WATER STORAGE TANK with all neccassary fitting

B) Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required. White glazed fire clay kitchen sink of size 600x450x250 mm

C) G.I. PIPE 20MM DIA

D) P-TRAP 3”

E) P-TRAP 4”

F) ELBOW 3”

G) COLLAR 3”

I) WASTE PIPE

J) PVC PIPE PRINCE MAKE OF DIA 4”

REPAIR AND RENOVATION OF GUEST ROOM CORRIDOR, MINI AUDITORIUM

Providing and fixing 12 mm thick Nordic pine wood wall panelling incl 12 mm ply,frame work and two or more coat of touch wood polish complete job

Providing and fixing of khatamband ceiling including 12mm thick ply board,budloo wood frame work and two coat of polish complete job

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade including wooden base primer

P/L of 8mm thick pergo or equivalent brand wooden flooring laid on 4mm thick foam incl.all fitting complete job

Supply of Auditorium Chairs

P/F of 35mm thick wire guaze shutter using galvanized M.S guaze of ave width for aperture 1.4mm with wire of dia 0.63 mm for window shutter made of kail wood

P/F of 35 mm thick ornamental type one side carved Kail wood door with all hardware accessiories

RENOVATION OF ARTS BLOCK AND SCIENCE BLOCK

P/F Of steel built up section including cutting welding of steel girder,plate in position including coat of red oxide work all complete job

P/F OF Doors,Windows and partition made of colour coated aluminum of different size shall be provided with each shelter as per drawing & Windows aluminum anodized of extrusions powder colour coated aluminum section three tracks with three sliding shutter

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete 1mm thick

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement prime

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade

P/L devri stone work for floor laid on 20 mm thick cement mortar mix 1:4 including moulding at stair steps and edges complete

P/L of khatamband ceiling panch marqba made out of budloo wood incl 12mm thick ply board,frame work of budloo wood of size 2” x 2”two or more coat of polish and cornice complete job

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws Second class Kail wood 35mm thick

Providing and fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with 4.0mm thick glass panes

CONSTRUCTION OF PANTRY AND REST ROOM (PRE FABRICATED STRUCTURE)

Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil :

Supplying /filling dry stone soling tightly hand packed under foundation & under floors including all leads, lifts and all carriages up to site of work complete

P/L of cement concrete 1:4:8 mix using 40mm N/size Agg. In foundation /plinth excluding cost of shuttering complete job

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-all work upto plinth level in 1:2:4 mix using 20mm N/size using crushed aggregate including all carriages upto site of work complete

Centering and shuttering including strutting ,propping etc. and removal of form work for: foundation, footing ,bases for columns

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. 40 mm thick with 20mm nominal size stone aggregate

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm

P/F Of steel built up section including cutting welding of columns purlins, rafter trusses & hoisting in position including coat of red oxide work all complete job

Supplying and filling in plinth with fine sand/GSB under floors including, watering, ramming, consolidating and dressing complete

The walls will be made up of 60 mm thick wall panels. The panels will be made of 0.50 mm thick hot dipped galvanized steel sheets on both sides with 60 mm thick layer of rigid CFC free close cell polyurethane foam (Density 40 KG +-2KG/CUM) insulation. The wall panels will be provided with tongue and groove joint and will be new and shall comply with relevant Bureau of India Standard specification. Base and Top channel of size 30 x 65 x 1.25 mm thick will be provided for fixing of wall panels. The PUF insulation material in the panel will have fire retarding and self-extinguishing properties

P/F OF Doors& Windows made of aluminum doors of different size shall be provided with each shelter as per drawing & Windows aluminum anodized of extrusions powder colour coated aluminum section three tracks with three sliding shutter

P/F Track deck grill make or equivalent H.I rib profiled sheets high tensile S.M.P Galvalume steel. Including side and end Lapp and using 8mm Galvalume hex self-drilling fastener on each crest of sheet for connection with purlins and seam bolts at 300mm centers on all sides and end lappets all complete job

P/F of GIP board fiber acoustics ceiling with square pipe 24mm grid section for ceiling of size 595x595x15mm thick is to be installed on frame work of acoustic sktel.

Providing valley/Ridges colour coated of width 60 cm overall width plain G.S sheet fixed with polymer coated J. or L hooks, bolts and nuts 8mm Dia G.I limpet and bitumen washers complete

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand)

15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 fine sand)

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 KG per SQM, including pointing in white cement mixed with pigment of matching shade complete.

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement prime

Providing and fixing 12 mm thick Nordic pine wood wall panelling incl 12 mm ply,frame work and two or more coat of touch wood polish complete job

Providing and fixing of khatamband ceiling including 12mm thick ply board,budloo wood frame work and two coat of polish complete job

P/F OF SANITARY ITEMS

A) Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

B) Providing and fixing single piece water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors and fixing of commod with neccassary concreting complete job wherever required White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

C) Providing and fixing 15 mm nominal bore C.P. bib cock of approved quality jaguar, cera, perko

D) Providing and fixing 15 mm nominal bore of standard back type C.P. close hole basin mixer pillar tap of approved quality and make jaguar, cera, perko

E) Providing and fixing CP Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. jaguar, cera, perko

F) Providing and fixing of 50ltr gryser of approved quality and make venus,Crompton,bajaj

G) Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make jaguar, cera, perko

H) PVC PIPE PRINCE MAKE OF DIA 3”

I) PVC PIPE PRINCE MAKE OF DIA 4”

J) PPR FITTING OF DIA 1.5” PRINCE MAKE

K) P-TRAP 3”

L) P-TRAP 4”

M) ELBOW 3”

N) COLLAR 3”

Q) WASTE PIPE

R) C.P. CONNECTION 18” TO 24”

S) GRATING

T) TOWEL RING

U) TOWEL ROD

V) PVC WATER STORAGE TANK with all neccasary fitting complete job

W) Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required. White glazed fire clay kitchen sink of size 600x450x250 mm

X) Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Circular shape 450 mm dia.

Y) Constructing brick masonry chamber for underground C.I. inspection chamber and bend with common burnt clay (non modular) bricks of class designation 7.5 in cement mortar 1:4 ( 1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 KG (weight of cover 23 KG and weight of frame 15 KG ) R.C.C. top slab with 1:1 ½ : 3 mix ( 1 cement : 1 ½ coarse sand : 3 graded stone aggregate 20 mm nominal size),foundation concrete 1:5:10 (1 cement: 5 fine sand: 10 graded stone aggregate 40mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design : Inside dimensions 455x610 mm and 45 cm deep for single pipe line

Wiring for the following light points with 1.5SQMm PVC insulated copper conductor 1100 volts grade standard flexible FRLS wires of approved make in concealed or surface mounted PVC conduit including providing and fixing of 6 Amp single pole rocker operated flush mounted switch of approved quality, color make and design in 1.6mm thick GI box and earthing of fixtures and the outlet box with 1.5SQMm PVC insulated copper conductor stranded flexible FRLS wire. a). One light controlled by 6 Amp Switch .

Wiring for 250 volts single phase and neutral 16 Amps switched socket outlet with 4 Sq.mm PVC insulated copper conductor 1100 volts grade stranded flexible FRLS wires in concealed or Surface mounted 25mm dia 2mm thick PVC conduit including providing and fixing of 16 Amps 3 pin switched socket of approved make and design in 1.6mm thick G1 boxes with grid plates and earthing the third pin of socket outlet with 4 Sq.mm PVC insulated copper conductor stranded flexible FRLS wire.

Supplying installation testing and commissioning of 10 watt slim round LED light of Vipro make complete fitting as required.

Supplying and installation testing and commissioning of following mccb,s

a)10 to 32 amp mcbSp

B)40 to 63 amp DP

Supplying and installation testing and commissioning of 6 way TPN DB box

Wiring for 230v ac, 5pin 5/6 amps switched socket outlets for light duty power with 230v ac 5/6amps, SP switch and socket, on same modular grid plate mounting with 2x2.5SQMm stranded copper conductor FRLS insulated 1100v grade wire in 25mm dia, 1.6mm thick rigid MS conduit/Pvc with earthing of 3rd pin by 1/1.5 sq mm stranded copper conductor FRLS insulated green 1100v grade wire with lug complete.

Wiring for ceiling/wall Fan points same as above in item No 1. but controlled by electronic stepped regulator 200 watts and 5A control switch and 15mm dia circular or hexagonal in 1.6mm thick MS zinc passivity sheet steel body and 12mm dia MS bar hook complete with white ,3mm thick 200mm dia laminated circular cover

Supplying installation testing and commissioning of exhaust fan complete connection as required

Wiring for circuits for light/fan/bells/exhaust fans/ AC’s etc with following size FRLS PVC insulated 1100v Grade multi strand copper conductor wire, FRLS green insulated multi strand copper conductor for earth wire in the existing conduits complete including connections all the three wires for phase, neutral and earth shall have to be taken to switch board and then distributed further. (without PVC, Conduits)

a) ) 2x2.5+1x1.5 Sq.mm stranded copper FRLS PVC insulated for lighting circuits

2x1.5 Sq mm for inverter circuts

Supplying installation testing and commissioning of celling fan Crompton Usha or equelent make.

RENOVATION OF WASH ROOM BLOCKS (BOYS)

Site clearance including dismantling of existing commodes and plaster

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing , polishing and moulding etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

Providing and fixing Ist quality ceramic glazed wall and anti skid floor tiles tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 KG per SQM, including pointing in white cement mixed with pigment of matching shade complete carriages up to site of work complete

P/F of 35mm thick wire guaze shutter using galvanized M.S guaze of ave width for aperture 1.4mm with wire of dia 0.63 mm for window shutter made of kail wood

P/F of 35mm thick glass panes shutter using 4 mm thick glass pane and kail wood beading for window shutter made of kail wood

P/F Of steel built up section including cutting welding of columns purlins, rafter trusses & hoisting in position including coat of red oxide work all complete job

P/F Track deck grill make or equivalent H.I rib profiled sheets high tensile S.M.P Galvalume steel. Including side and end Lapp and using 8mm Galvalume hex self-drilling fastener on each crest of sheet for connection with purlins and seam bolts at 300mm centers on all sides and end lappets all complete job

Providing valley/Ridges of width 60 cm overall width plain G.S sheet fixed with polymer coated J. or L hooks, bolts and nuts 8mm Dia G.I limpet and bitumen washers complete

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand)

15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 fine sand)

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade including wooden base primer

P/F OF SANITARY ITEMS

A) Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

B) Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors and fixing of commod with neccassary concreting complete job wherever required White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

C) Providing and fixing 15 mm nominal bore C.P. bib cock of approved quality jaguar, cera, perko

D) Providing and fixing 15 mm nominal bore of standard back type C.P. close hole basin mixer pillar tap of approved quality and make jaguar, cera, perko

E) Providing and fixing CP Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. jaguar, cera, perko

F) Providing and fixing of 50ltr gryser of approved quality and make venus,Crompton,bajaj

G) Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make jaguar, cera, perko

H) PVC PIPE PRINCE MAKE OF DIA 3”

I) PVC PIPE PRINCE MAKE OF DIA 4”

J) PPR FITTINF OF DIA 1.5” PRINCE MAKE

K) P-TRAP 3”

L) P-TRAP 4”

M) ELBOW 3”

N) COLLAR 3”

Q) WASTE PIPE

R) C.P. CONNECTION 18” TO 24”

S) GRATING

T) TOWEL RING

U) Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Circular shape 450 mm dia.

V) Constructing brick masonry chamber for underground C.I. inspection chamber and bend with common burnt clay (non modular) bricks of class designation 7.5 in cement mortar 1:4 ( 1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 KG (weight of cover 23 KG and weight of frame 15 KG ) R.C.C. top slab with 1:1 ½ : 3 mix ( 1 cement : 1 ½ coarse sand : 3 graded stone aggregate 20 mm nominal size),foundation concrete 1:5:10 (1 cement: 5 fine sand: 10 graded stone aggregate 40mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design : Inside dimensions 455x610 mm and 45 cm deep for single pipe line

Wiring for the following light points with 1.5SQMm PVC insulated copper conductor 1100 volts grade standard flexible FRLS wires of approved make in concealed or surface mounted PVC conduit including providing and fixing of 6 Amp single pole rocker operated flush mounted switch of approved quality, color make and design in 1.6mm thick GI box and earthing of fixtures and the outlet box with 1.5SQMm PVC insulated copper conductor stranded flexible FRLS wire. a). One light controlled by 6 Amp Switch .

Wiring for 250 volts single phase and neutral 16 Amps switched socket outlet with 4 Sq.mm PVC insulated copper conductor 1100 volts grade stranded flexible FRLS wires in concealed or Surface mounted 25mm dia 2mm thick PVC conduit including providing and fixing of 16 Amps 3 pin switched socket of approved make and design in 1.6mm thick G1 boxes with grid plates and earthing the third pin of socket outlet with 4 Sq.mm PVC insulated copper conductor stranded flexible FRLS wire.

Supplying installation testing and commissioning of 10 watt slim round LED light of Vipro make complete fitting as required.

Supplying and installation testing and commissioning of following mccb,s a)10 to 32 amp mcbSp

Supplying and installation testing and commissioning of 6 way TPN DB box

RENOVATION OF WASH ROOM BLOCKS (GIRL)

Site clearance including dismantling of existing commodes and plaster

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing , polishing and moulding etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

Providing and fixing Ist quality ceramic glazed wall and anti skid floor tiles tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 KG per SQM, including pointing in white cement mixed with pigment of matching shade complete carriages up to site of work complete

P/F of 35mm thick wire guaze shutter using galvanized M.S guaze of ave width for aperture 1.4mm with wire of dia 0.63 mm for window shutter made of kail wood

P/F of 35mm thick glass panes shutter using 4 mm thick glass pane and kail wood beading for window shutter made of kail wood

P/F Of steel built up section including cutting welding of columns purlins, rafter trusses & hoisting in position including coat of red oxide work all complete job

Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gram/m2

Providing valley/Ridges of width 60 cm overall width plain G.S sheet fixed with polymer coated J. or L hooks, bolts and nuts 8mm Dia G.I limpet and bitumen washers complete

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand)

15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 fine sand)

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade including wooden base primer

P/F OF SANITARY ITEMS

A) Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

B) Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors and fixing of commod with neccassary concreting for fixing of commod complete job wherever required White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

C) Providing and fixing 15 mm nominal bore C.P. bib cock of approved quality cera,perko,jaguar

D) Providing and fixing 15 mm nominal bore of standard back type C.P. close hole basin mixer pillar tap of approved quality and make cera,perko,jaguar

E) Providing and fixing CP Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. cera,perko,jaguar

F) Providing and fixing of 50ltr gryser of approved quality and make venus,Crompton,bajaj

G) Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make cera,perko,jaguar

H) PVC PIPE PRINCE MAKE OF DIA 3”

I) PVC PIPE PRINCE MAKE OF DIA 4”

J) PPR FITTINF OF DIA 1.5” PRINCE MAKE

K) P-TRAP 3”

L) P-TRAP 4”

M) ELBOW 3”

N) COLLAR 3”

Q) WASTE PIPE

R) C.P. CONNECTION 18” TO 24”

S) GRATING

T) TOWEL RING

U) Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Circular shape 450 mm dia.

V) Constructing brick masonry chamber for underground C.I. inspection chamber and bend with common burnt clay (non modular) bricks of class designation 7.5 in cement mortar 1:4 ( 1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 KG (weight of cover 23 KG and weight of frame 15 KG ) R.C.C. top slab with 1:1 ½ : 3 mix ( 1 cement : 1 ½ coarse sand : 3 graded stone aggregate 20 mm nominal size),foundation concrete 1:5:10 (1 cement: 5 fine sand: 10 graded stone aggregate 40mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design : Inside dimensions 455x610 mm and 45 cm deep for single pipe line

Wiring for the following light points with 1.5SQMm PVC insulated copper conductor 1100 volts grade standard flexible FRLS wires of approved make in concealed or surface mounted PVC conduit including providing and fixing of 6 Amp single pole rocker operated flush mounted switch of approved quality, color make and design in 1.6mm thick GI box and earthing of fixtures and the outlet box with 1.5SQMm PVC insulated copper conductor stranded flexible FRLS wire. a). One light controlled by 6 Amp Switch .

Wiring for 250 volts single phase and neutral 16 Amps switched socket outlet with 4 Sq.mm PVC insulated copper conductor 1100 volts grade stranded flexible FRLS wires in concealed or Surface mounted 25mm dia 2mm thick PVC conduit including providing and fixing of 16 Amps 3 pin switched socket of approved make and design in 1.6mm thick G1 boxes with grid plates and earthing the third pin of socket outlet with 4 Sq.mm PVC insulated copper conductor stranded flexible FRLS wire.

Supplying installation testing and commissioning of 10 watt slim round LED light of Vipro make complete fitting as required.

Supplying and installation testing and commissioning of following mccb,s a)10 to 32 amp mcbSp

Supplying and installation testing and commissioning of 6 way TPN DB box

RENOVATION OF WASH ROOM BLOCKS (GIRLS)

Site clearance including dismantling of existing commodes and plaster

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing , polishing and moulding etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 KG per SQM, including pointing in white cement mixed with pigment of matching shade complete.

P/F of 35mm thick wire guaze shutter using galvanized M.S guaze of ave width for aperture 1.4mm with wire of dia 0.63 mm for window shutter made of kail wood

P/F of 35mm thick glass panes shutter using 4 mm thick glass pane and kail wood beading for window shutter made of kail wood

P/F Of steel built up section including cutting welding of columns purlins, rafter trusses & hoisting in position including coat of red oxide work all complete job

Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gram/m2

Providing valley/Ridges of width 60 cm overall width plain G.S sheet fixed with polymer coated J. or L hooks, bolts and nuts 8mm Dia G.I limpet and bitumen washers complete

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand)

15mm Cement plaster on the rough side of single or half brick wall of mix 1 : 6 ( 1 cement : 6 fine sand)

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade including wooden base primer

P/F OF SANITARY ITEMS

A) Providing and fixing wash basin with C.I. brackets, , 32 mm C.P. brass waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

B) Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors and fixing of commod with neccassary concreting complete job wherever required White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

C) Providing and fixing 15 mm nominal bore C.P. bib cock of approved quality cera,parko,jaguar

D) Providing and fixing 15 mm nominal bore of standard back type C.P. close hole basin mixer pillar tap of approved quality and make cera,perko,jaguar

E) Providing and fixing CP Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. cera,perko,jaguar

F) Providing and fixing of 50ltr gryser of approved quality and make venus,Crompton,bajaj

G) Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make cera,perko,jaguar

H) PVC PIPE PRINCE MAKE OF DIA 3”

I) PVC PIPE PRINCE MAKE OF DIA 4”

J) PPR FITTINF OF DIA 1.5” PRINCE MAKE

K) P-TRAP 3”

L) P-TRAP 4”

M) ELBOW 3”

N) COLLAR 3”

Q) WASTE PIPE

R) C.P. CONNECTION 18” TO 24”

S) GRATING

T) TOWEL RING

U) Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Circular shape 450 mm dia.

V) Constructing brick masonry chamber for underground C.I. inspection chamber and bend with common burnt clay (non modular) bricks of class designation 7.5 in cement mortar 1:4 ( 1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 KG (weight of cover 23 KG and weight of frame 15 KG ) R.C.C. top slab with 1:1 ½ : 3 mix ( 1 cement : 1 ½ coarse sand : 3 graded stone aggregate 20 mm nominal size),foundation concrete 1:5:10 (1 cement: 5 fine sand: 10 graded stone aggregate 40mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design : Inside dimensions 455x610 mm and 45 cm deep for single pipe line

Wiring for the following light points with 1.5SQMm PVC insulated copper conductor 1100 volts grade standard flexible FRLS wires of approved make in concealed or surface mounted PVC conduit including providing and fixing of 6 Amp single pole rocker operated flush mounted switch of approved quality, color make and design in 1.6mm thick GI box and earthing of fixtures and the outlet box with 1.5SQMm PVC insulated copper conductor stranded flexible FRLS wire. a). One light controlled by 6 Amp Switch .

Wiring for 250 volts single phase and neutral 16 Amps switched socket outlet with 4 Sq.mm PVC insulated copper conductor 1100 volts grade stranded flexible FRLS wires in concealed or Surface mounted 25mm dia 2mm thick PVC conduit including providing and fixing of 16 Amps 3 pin switched socket of approved make and design in 1.6mm thick G1 boxes with grid plates and earthing the third pin of socket outlet with 4 Sq.mm PVC insulated copper conductor stranded flexible FRLS wire.

Supplying installation testing and commissioning of 10 watt slim round LED light of Vipro make complete fitting as required.

Supplying and installation testing and commissioning of following mccb,s a)10 to 32 amp mcbSp

Supplying and installation testing and commissioning of 6 way TPN DB box

PROVIDING AND FIXING OF SLIDER MECHANISM STRUCTURE FOR INTERACTIVE FLAT PANEL DISPLAYS 65-17 NO, AND 75"- 4 NO.

Providing and placing the wall mount shutter case for 65 inches and 75 inches interactive flat panel display board. All frame structure and board frame are in aluminium 1:8 mm with metallic anodised. The case is provided with two sliding shutters rolling on high quality roller wheels with locking facility. The shutters are made of 18 mm high gloss white laminated MDF board. Two fixed display boards are provided on both sides fabric cladded 0.19 mm soft board.

THE CONSTRUCTION OF ROAD CONNECTING SPORTS BLOCK TO MAIN ROAD AT GDC TRAL.

Excavating, supplying and filling of local earth (including royalty by mechanical transport upto a lead of 5 km also including ramming and watering of the earth in layers not exceeding 20 com in trenches, plinth, sides of foundation etc.complete L =34 W= 8 Depth= 0.3

Construction of graular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desire density, complete as per specifications and directions of Engineer-in-Charge With material conforming Grade-1 (sane range 10.075 uni) having CBR Value-30 75mm 10 L= 34 W= 7.5 Depth= 0.3

Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm) to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to osue, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub-base base course on well prepared surface and compacting with vibratory roller of $ to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge, L= 34 W= 7.5 Depth= 0.1

Providing and laying bituminous macadam using crushed stone aggregates of specified grading premixed with bituminous binder, transported to site by tippers, laid over a previously prepared surface with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specifications and directions of Engineer-in-Charge.50 to 100 mm average compacted thickness with bitumen of grade VG-30 @3.5% (percentage by weight of total mix) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity. L= 34 W= 7.5 Depth= 0.05

Providing and applying tack coat using hot straight run bitumen of grade-VG-10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and reparing the existing road surface as per specifications on W.B.M. @ 0.75 Kg/sqm. LONG WALL L = 34 W= 7.5

Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per Technical Specification Clause 508. L= 34 W= 7.5

Providing and laying seal coat over prepared surface of road with bitumen heated in bitumen boiler fitted with the spray set spraying using 98 kg of bitumen of grade VG-10 and blinding surface with 0.90 cum of stone aggregate of 6.7mm size (Passing 11.2mm sieve and retained on 2.36 mm sieve) per 100 sqm of road surface including rolling and finishing with power road roller all complete. L= 34 W= 7.5

CONSTRUCTION OF FOOTPATH 150 M LENGTH 4' WIDE PLACED CENTRALLY DIVIDING THE GROUND INFRONT OF SPORTS BLOCK IN TWO PARTS AND 20 M INFRONT AND BESIDES CANTEEN AND 40 M AT OTHER LOCATIONS FOR PEDESTRIAN MOVEMENT

Earth work in bulk excavation by manual means overareas (exceeding 30 cm indepth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50meters and lift upto1.5m (210x1.2x0.3)

P/L stone soling hand packed 6" thick (210x1.2x0.15)

Providing and laying in position cement concrete of grade 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40 mm nominal size) including curing but excluding the cost of centring and shuttering in foundation[210x1.2x0.10)

Providing and laying in position cement concrete of grade 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) including curing but excluding the cost of centring and shuttering 4" thick

P/L precast inter locked cement tiles 22 mm thick with cement mortar 1:3 (1cement:3coarse sand) 12mm thick

Providing and laying in position cement concrete of grade 1:2:4 (1 cement 2 coarse sand &4 graded stone aggregate 20 mm nominal size) including curing but excluding the cost of centring and shuttering in blocks

Centering and shuttering including strutting, propping etc. and removal of form work

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1cement: 3coarse sand) 8 including making joints with or without grooves (thickness of thejointsexcept at sharp curve shall not to be more than 5mm) including making drainage opening wherever required complete etc along both sides of footpath

CONSTRUCTION OF FOOTPATH 57M LENGTH 8' WIDE BESIDES ARTS BLOCK TOWARDS.CANTEEN FOR PEDESTRIAN MOVEMENT

Earth work in bulk excavation by manual means overareas (exceeding 30 cm indepth, 15 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50meters and lift upto1 5m (57x2 43x0.3)

P/L stone soling hand packed 6" thick (57x2.43x0.15)

Providing and laying in position cement concrete of grade 1:4:8 (1 cement 4 coarse sand 8 graded stone aggregate 40 mm nominal size) Including curing but excluding the cost of centring and shuttering in foundation (57x2 43x0.10)

Providing and laying in position cement concrete of grade 1:3:6 (1 cement 3 coarse sand: 6 graded stone aggregate 20 mm cominal size) including curing but excluding the cost of centring and shuttering 4 thick

P/L precast inter locked cement tiles 22 mm thick with cement mortar 1.3 (Icement 3coarse sand) 12mm thick

Providing and laying in position cement concrete of grade 1:2.4 (1 cement 2 coarse sand 4 graded stone aggregate 20 mm nominal size) including curing but excluding the cost of centring and shuttering in blocks.

Centering and shuttering including strutting propping etc. and removal of form work

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature jointed with cement mortar 1.3 (1cement 3coarse sand) including making joints with or without grooves (thickness of the joints except at sharp curve shall not to be more than 5mm) including making drainage opening wherever required complete etc along bath sides of footpath

CONSTRUCTION OF FOOTPATH 21 M LENGTH 5' WIDE TOWARDS ALMOND GROUND FOR PEDESTRIAN MOVEMENT

Earth work in bulk excavation by manual means over areas (exceeding 30 cm in-depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead up to 50meters and lift upto1.5m (21x1.5x0.3)

P/L stone soling hand packed 6" thick (21x1.5x0.15)

Providing and laying in position cement concrete of grade 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40 mm nominal size) including curing but excluding the cost of centring and shuttering in foundation (21x1.5x0.10)

Providing and laying in position cement concrete of grade 1:3:6 (1 cement 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) including curing but excluding the cost of centring and shuttering 4" thick.

P/L precast inter locked cement tiles 22 mm thick with cement mortar 1:3 (Icement:3coarse Land) 12mm thick

Providing and laying in position cement concrete of grade 1:2:4 (1 cement 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) Including curing but excluding the cost of centring and shuttering in blocks.

Centering and shuttering including strutting, propping etc. and removal of form work

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature jointed with cement mortar 1:3 (1cement:3coarse sand) including making joints with or without grooves (thickness of thejointsexcept at sharp curve shall not to be more than 5mm) including making drainage opening wherever required complete etc along both sides of footpath.

CONSTRUCTION OF FOUNTAIN IN PREMISES

Earth work in bulk excavation by manual means over areas exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) Including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m,

P/L stone soling hand packed 6" thick

Providing and laying in position cement concrete of grade 1:4:8 (1 cement 4 coarse sand: 8 graded stone aggregate 40 mm nominal size) including curing but excluding the cost of centring and shuttering.

Providing and laying in position cement concrete of grade 1:15:3 (1 cement:1% coarse sand: 3 graded stone aggregate 20 mm nominal size) including curing but excluding the cost of centring and shuttering

Centering and shuttering including strutting, propping etc. and removal of formwork.

Steel reinforcement for R.C.C. work Including straightening, cutting, bending, placing in position and binding of MT bars of Fe 500 or more.

Providing and Laying in position cement concrete of grade 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) including curing but excluding the cost of centring and shuttering for walls of fountain.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, In all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-InCharge, inskirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand) and jointing withgrey cement slurry 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

P/L precast inter locked cement tiles

P/F kerb stone edge (for flower buds)

TILE WORK IN FRONT OF LIBRARY AND BESIDES SCIENCE BLOCK

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08%and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement:4 coarsesand) Including grouting the joints with white cement and matching pigments etc. complete of size 600 mm x600 mm

DEVRI STONE PROVISION INFRONT OF ADMIN BLOCK

Providing and laying chisel dressed Devri Stone of size 300x200 mm face with 200 mm depth in cement mortar 1:6 (1 cement: 6 coarse sand) up to plinth level including curing, One face Fine chisel dressed

CONSTRUCTION OF 1.5M RETAINING WALL

Earth work in bulk excavation by manual means over areas(exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m

P/L Stone soiling hand packed 6" thick

Providing and laying in position cement concrete of grade 1:4:8 (1) cement: 4 coarse sand: 8 graded stone aggregate 40 mm nominal size) including curing but excluding the cost of centring and shuttering in foundation.

Providing and laying in position cement concrete of grade 1:2:4 (1) cement: 2 coarse sand 4 graded stone aggregate 20 mm nominal size) including curing but excluding the cost of centring and shuttering.

Centering and shuttering including strutting, propping etc. and removal of form work for Retaining walls, return walls, walls (any thickness) including attached pilasters buttresses, plinth and string courses fillets, kerbs and steps etc. 2x 1x219-438 sqm

CONSTRUCTION OF 1M RETAINING WALL

Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) Including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m

P/L Stone soiling hand packed 6" thick

Providing and laying in position cement concrete of grade 1:4:8 (1) cement: 4 coarse sand: 8 graded stone aggregate 40 mm nominal size) including curing but excluding the cost of centring and shuttering in foundation

Providing and laying in position cement concrete of grade 1:2:4 (1 cement: 2 coarse sand 4 graded stone aggregate 20 mm nominal size) including curing but excluding the cost of centring and shuttering

Centering and shuttering including strutting, propping etc. and renoval of form work for Retaining walls, retum walls, walls (any thickness) including attached pilasters buttresses, plinth sqm and string courses fillets Serbs and steps etc. 2x 1x41.66 = 84 sqm

CONSTRUCTION OF 1' RETAINING WALL

Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m

P/L Stone soiling hand packed 6" thick

Providing and laying in position cement concrete of grade 1:4:8 (1) cement: 4 coarse sand: 8 graded stone aggregate 40 mm nominal size) including curing but excluding the cost of centring and shuttering in foundation.

Providing and laying in position cement concrete of grade 1:2:4 (1) cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) Including curing but excluding the cost of centring and shuttering.

Centering and shuttering including strutting, propping etc. and removal of form work for Retaining walls, return walls, walls (any thickness) including attached pilasters buttresses, plinth and string courses fillets, kerbs and steps etc. 2x 1x 100 = 200 sqm

CONSTRUCTION OF VOLLEY BALL COURT

Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m

Laying, spreading and compacting stone aggregate 2 layers 4.5" thick to WBM specifications, hand picking, rolling with 3wheeled road/vibratory roller 8- 10 tonne capacity in stages to propergrade and camber, applying and brooming requisite type of screening/binding material to fill up Interstices of coarse aggregate, watering and compacting to the required density

Providing and applying tack coat using hot straight run bitumen of grade-VG- 10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boller, cleaning and preparing the existing road surface as per specifications On W.B.M. @ 0.75 Kg/sqm.

Providing and laying Bitumen Penetration Macadam with hard stone aggregate of quality, size and grading as specified, with bitumen of suitable penetration grade including required key aggregate as specified, spreading coarse aggregate with the help of self propelled/tipper tail mounted aggregate spreader and applying bitumen by a pressure distributor and then spreading key aggregate with the help of aggregate spreader complete, including consolidation with road roller of minimum 8 to 10 tonne capacity to achieve specified values of compaction and surface accuracy. For 50 mm compacted thickness using coarse aggregate of size 50-20mm graded @ 0.60 cum per 10 sqm key aggregate of size 12.5 mm graded @ 0.15 cum per 10 sqm. With paving asphalt grade VG-10@ 50 kg/10sqm

Providing and laying seal coat of premixed fine aggregate (passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade VG-10 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface including rolling and finishing with road all complete

Flooring: Artificial grass turf of 50mm pile height with30 mm infill Fibre: It should be polyethylene fibre treatedwith UV Inhibiters and is abrasion resistant sothat athletes can slide on the fibres withoutfear of turf burns. Infill Similarly sized particles of washed silica sandand rounded cryogenic rubber infill hold eachother in suspension, compress and expand toprovide stability, long life resilencyandnd proper energy restitution. Backing: The backing should be made of a combination of permeable woven and nanpolypropylene fabrics to provide exceptional strength and unmatched vertical drainage

Line marking: Volleyball Court Line marking & painting withsynthetic enamel paint to complete court lumpsum

4 Pole and Net: Volleyball Court poles with nets as per the Ls standards

Fencing: Gl chain link fencing 8 ft height with MS angle poles @ 10 ft cc with provision of 8 sqmft wide opening with double door including all civil work.

COSTRUCTION OF BADMINTON COURT

Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m

Laying, spreading and compacting stone aggregate 2 layers 4.5" thick to WBM specifications, hand picking, rolling with 3wheeled road/vibratory roller 8-10 tonne capacity in stages to propergrade and camber, applying and brooming requisite type of screening/binding material to fill up Interstices of coarse aggregate, watering and compacting to the required density.

Providing and applying tack coat using hot straight run bitumen of grade-VG-10, Including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications On W.B.M. @ 0,75 Kg/sqm.

Providing and laying Bitumen Penetration Macadam with hard stone aggregate of quality, size and grading as specified, with bitumen of suitable penetration grade including required key aggregate as specified, spreading coarse aggregate with the help of self propelled/tipper tail mounted aggregate spreader and applying bitumen by a pressure distributor and then spreading key aggregate with the help of aggregate spreader complete, including consolidation with road roller of minimum 8 to 10 tonne capacity to achieve specified values of compaction and surface accuracy, 16.44.1 Fer 50 mm compacted thickness using coarse aggregate of size 50-20mm graded @ 0.60 cum per 10 sqm key aggregate of size 12.5 mm graded @ 0.15 cum per 10 sqm. With paving asphalt grade VG-10 @ 50 kg/10sqm

Providing and laying seal coat of premixed fine aggregate (passing 2.36 mm and retained on 180 micransleve) with bitumen using 128 kg of 5 bitumen of grade VG-10 bitumen per cum of fine sąm aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface including rolling and finishing with road all complete.

Flooring: Artificial grass turf of 50mm pile height with30 mm infill. Fibre: It should be polyethylene fibre treatedwith UV inhibiters and is abrasion resistant sothat athletes can slide on the fibres withoutfear of turf burns. Infill : Similarly sized particles of washed silica sandand rounded cryogenic rubber infill hold eachother in suspension, compress and expand toprovide stability, long life resilencyandnd proper energy restitution. Backing: The backing should be made of a combination of permeable woven and nonpolypropylene fabrics to provide exceptional strength and unmatched vertical drainage

Line marking: Badminton Court Line marking & painting withsynthetic enamel paint to complete court lumpsum

Pole and Net Badminton Court poles with nets as per the is standards

PROVISION OF FLOWER BEDS ALONGSIDE MAIN ROAD FROM MAIN GATE TO ARTS BLOCK, THEREAFTER FROM ARTS BLOCK TO LIBRARY BLOCK AND SIDEWAYS OF OLD SPORTS BLOCK TO SCIENCE BLOCK

Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m

P/L Stone solling hand packed 6" thick

Providing and laying in position cement concrete of grade 1:3:6 (1, cernent:3 coarse sand: 6 graded stone aggregate 20 mm nominal size) including curing but excluding the cost of centring and shuttering in foundation 4" thick

Providing and laying in position cement concrete of grade 1:2:4 (1 cement 2 coarse sand 4 graded stone aggregate 20 mm nominal size) including curing but excluding the cost of centring and shuttering

Cement Plastering 1:6 (1 cement: 6 fine sand) 12mm thick.

Supplying and stacking at site Good Earth

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1cement:3coarse sand)including making joints with or without grooves (thickness of thejointsexcept at sharp curve shall not to be more than 5mm) including making drainage opening wherever required complete etc along both sides of flower bed from Arts block to Library block 283 m in length

PROVISION OF KERB STONES

Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m

P/L stone soling hand packed 6" thick

Providing and laying in position cement concrete of grade 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40 mm nominal size) including curing but excluding the cost of centring and shuttering 4" thick

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level andcurvature, jointed with cement mortar 1:3 (1 cement. 3 coarse sand) including making joints with or without grooves (thickness of the joints except at sharp curve shall not to be more than 5mm) including making drainage opening wherever required complete etc

SITE DEVELOPMENT BY WAY OF LEVELLING IN TERMS OF FILLING OF CRICKET GROUND AND GIRLS PARK ETC.

Leveling of the area with machines

75mm thick back filling for pitching including supplying of required materials and consolidation etc. complete

CONSTRUCTION OF CIRCULAR SITTING INFRONT OF ARTS BLOCK SURROUNDING FOUNTAIN ALL AROUND

Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m,

P/L Stone soiling hand packed 6" thick

Providing and laying in position cement concrete of grade 1:2:4 (1) cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) including curing but excluding the cost of centring and shuttering

Centering and shuttering including strutting, propping etc. and removal of form work

CONSTRUCTION OF BOREWELL 100 M DEPTH NEAR LIBRARY

Boring/ drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in 15: 2800(part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of alli equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge upto 90 m depth below ground level. All types of soil 300 mm dia

Supplying, assembling, lowering and fixing in vertical position in bore well, MS Pipe medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings and accessories etc all complete for all depths as per direction 150 mm nominal size dia carriages up to site of work complete

Gravel packing in tube well construction In accordance with IS: 4097, including providing gravel fine/medium/coarse in required grading and sizes as per actual requirement all complete as per direction of Engineer carriages up to site of work complete

Providing and fixing factory made precast RCC perforated drain covers. having concrete of strength not less than M-25, of size 1000x450x50 mm reinforced with 8 mm dia four nos longitudinal and 9nos cross sectional T.M.T hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S flats of size 50mmx1.6mm complete all as per direction of Engineer- in-charge carriages up to site of work complete

Supplying, assembling, lewering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/plain ended casing pipes of required dia, confarming to IS: 4270 of reputed & approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire & labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-Incharge 100 mm nominal size dia having minimum wall thickness 5.00 mm

Development to tube well in accordance with 15: 2800(part 1) and 15:11189 to establish maximum rate of usable water Yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required time till well is fully developed measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method collecting water samples & getting tested in approved laboratory, Uc disinfection of tube well, all complete Including required hire & labour charges of air compressor tools & accessories, etc. all, as per direction of Engineer-in- charge

Providing and fluding suitable size threaded mlid steel cap or spot weided plate to the top of bore well housing/ casing pipe removable as per requirement all complete for bare well of 100 mm dia.

Providing and faxing MS clamp of required dia to the top of casing/ housing pipe of tube well as per 15:2800 (part 1), Including necessary bolts &nuls of required size complete 100 mm clamp

Providing and faing Ball plug/ Bottom plug of required dia to the bottom of pipe assembly of tube well as per IS: 2800 (part 1). 100 mm dia.

Structural steel work in single section, fixed with or without connecting plate, Including cutting, hoisting, fixing In position and applying a priming coat of approved steel primer all complete.

SITC of 12.5 3phase submerssible pump and motor assembly with started panel of approved make and brand including lowering of pump cable connections etc.

P/L of 3 phase 10sqmm 3 core copper submerssible fixable cable

P/L of 3 phase 50sqmm 4 core copper fixable cable from main to starter panel.

SITC 30 KVA servo voltage stablizer voltage range for 120-460 with 200 A AL bus BAR with main switch Oil cooled with copper winding, MS sheet body, prime grade power coating, driven type motor insulation-class A greater than 6 mega ohms micro processorbasewd digital control panel including all civil works complete

RENOVATION OF WASHROOM

P/L of Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc.complete.50 mm thick with 20mm nominal size stone aggregate

Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS: 15622 of minimum thickness 5mm of approved make in all colours, shades except burgundy,bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 cearsesand) and jointing with grey cement slurry @3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 of minimum thickness 5mm of approved make in all colours, shadesexcept burgundy, bottle green, black of any size as approved by Engineer-in-Charge, Inskirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete

Providing and fixing wash basin with C.I. brackets, , 32 mm C.P. brass waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors and fixing of commod with neccassary concreting complete job wherever required White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Providing and fixing 15 mm nominal bore C.P. bib cock of approved quality cera,perko,jaguar

Providing and fixing 15 mm nominal bore of standard back type C.P. close hole basin mixer pillar tap of approved quality and make cera,perko,jaguar

Providing and fixing CP Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. cera,perko,jaguar

Providing and fixing of 50ltr gryser of approved quality and make venus,Crompton,bajaj

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make cera,perko,jaguar

Health Faucet

PVC PIPE PRINCE MAKE OF DIA 3”

P Trap 3"

Elbow 3"

Collar

Waste Pipe

CP Connection

Gratting

Towel Rod

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Circular shape 450 mm dia.

Wiring for the light points with 1.5SQMm PVC insulated copper conductor 1100 volts grade standard flexible FRLS wires of approved make in concealed or surface mounted PVC conduit including providing and fixing of 6 Amp single pole rocker operated flush mounted switch of approved quality, color make and design in 1.6mm thick GI box and earthing of fixtures and the outlet box with 1.5SQMm PVC insulated copper conductor stranded flexible FRLS wire. a). One light controlled by 6 Amp Switch .

Wiring for 250 volts single phase and neutral 16 Amps switched socket outlet with 4 Sq.mm PVC insulated copper conductor 1100 volts grade stranded flexible FRLS wires in concealed or Surface mounted 25mm dia 2mm thick PVC conduit including providing and fixing of 16 Amps 3 pin switched socket of approved make and design in 1.6mm thick G1 boxes with grid plates and earthing the third pin of socket outlet with 4 Sq.mm PVC insulated copper conductor stranded flexible FRLS wire.

Supplying installation testing and commissioning of 10 watt slim round LED light of Vipro make complete fitting as required.

M/S MUSHTAQ AHMAD DAR (BID ID -2344094)

KAMILI INFRASTRUCTURES PRIVATE LIMITED (BID ID -2343987)

M/S ABDUL KHAKIQ BEIGH (BID ID -2343714)

ENN BEE ENTERPRISES (BID ID -2343877)

MIRJAN ENTERPRISES (BID ID -2344059)

ADIL SHAFI DAR (BID ID -2344033)

M/S AL HAYATT INFRASTRUCTURE (BID ID -2344101)

firdous kamran shora (BID ID -2344053)

M/S REAL CONSTRUCTION (BID ID -2344123)