Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.9 LAccepted-AOC CIRCUIT HOUSE ROAD DISTT SINGRAULI MP | SINGRAULI | SINGRAULI | MP | ₹4.9 L Quoted ₹4.1 L | L1 | Accepted-AOC L1 bidder |
| 2 | L2₹4.2 LRejected-Finance MAJAN KALA P O KACHANI DIST SINGRAULI M P 486887 | SINGRAULI | MADHYA PRADESH | 486887 | ₹4.2 L | L2 | Rejected-Finance Emerged as L2 bidder |
| 3 | L3₹4.7 LRejected-Finance | ₹4.7 L | L3 | Rejected-Finance Emerged as L3 bidder |
| Sl No | Description | Qty | Unit | HINDUSTHAN INDUSTRIES L3 | Electromech Technicals L1 | SHYAM AND BROTHERS ENGINEERING WORKS L2 |
|---|---|---|---|---|---|---|
| 1.00Repairing of Gear Box 1 (Flender Make KZNS 320, Sl No - 992351002 ) | ||||||
| 1.01 | Dismantling, cleaning, assembly & repair of the complete gear box | 1 | Job | 62,000 ₹62,000 | 3,000 ₹3,000 | 5,000 ₹5,000 |
| 1.02 | Consumable item i.e Cotton waste, kerosene oil, chisel emery paper etc. | 1 | LS | 12,000 ₹12,000 | 1,000 ₹1,000 | 1,500 ₹1,500 |
| 1.03 | Repairing of housing bore for 2nd intermediate pinion shaft ( bearing seating area) (Sl. No, 1.03 to 1.05)
i) Cost of CI machinable electrodes | 7 | Kg | 250 ₹1,750 | 2,500 ₹17,500 | 5,000 ₹35,000 |
| 1.04 | ii) Welding charges | 3 | Days | 500 ₹1,500 | 600 ₹1,800 | 3,000 ₹9,000 |
| 1.05 | iii) Boring charge on line boring machine for boring to size of final bore area 190 OD x 85 mm therefore volume of material to be bored i.e. 190 OD x 175 ID x 85 mm wide x 02 side | 731 | cm3 | 19 ₹13,889 | 42 ₹30,702 | 40 ₹29,240 |
| 1.06 | Replacement of damaged component (Sl No. 1.06 to 1.08)
i) Nut bolt spring washer (HT grade) | 16 | nos | 120 ₹1,920 | 350 ₹5,600 | 1,000 ₹16,000 |
| 1.07 | ii) Input pinion with bevel gear & intermediate | 1 | nos | 44,500 ₹44,500 | 70,000 ₹70,000 | 25,000 ₹25,000 |
| 1.08 | iii) Bearing No.- NJ2318ECP/NJ2317ECP of 2nd Intermediate (SKF/NTN/FAG/KOYO/equivalent brand) | 2 | nos | 8,000 ₹16,000 | 13,000 ₹26,000 | 25,000 ₹50,000 |
| 2.00Repairing of Gear Box 2 (Flender Make KZNS 320, Sl No.- 992351005 ) | ||||||
Tender Value
₹6.0 L
EMD Value
₹7,600
Closing Date
18 Oct 2025, 1:00 pmClosed
General Manager (EnM)
Office of the General Manager Khadia Area Sonbhadra 231222 (UP)
Repairing 03 nos. of plough feeder gear box installed at CHP Phase 1 Khadia Project
2025_NCL_345011_1
KHD/EM/E-Tender/25-26/298 Date 01.10.2025
Open Tender
Electrical and Maintenance Works
30 days
Khadia Project
Please refer NIT
3 documents required · 3 mandatory
₹7,600
7 Jan 2026
3 Oct 2025
20 Oct 2025
3 Oct 2025
18 Oct 2025
4 Oct 2025
3 Oct 2025 - 10 Oct 2025
Amount
Repairing of Gear Box 1 (Flender Make KZNS 320, Sl No - 992351002 )
Dismantling, cleaning, assembly & repair of the complete gear box
Consumable item i.e Cotton waste, kerosene oil, chisel emery paper etc.
Repairing of housing bore for 2nd intermediate pinion shaft ( bearing seating area) (Sl. No, 1.03 to 1.05) i) Cost of CI machinable electrodes
ii) Welding charges
iii) Boring charge on line boring machine for boring to size of final bore area 190 OD x 85 mm therefore volume of material to be bored i.e. 190 OD x 175 ID x 85 mm wide x 02 side
Replacement of damaged component (Sl No. 1.06 to 1.08) i) Nut bolt spring washer (HT grade)
ii) Input pinion with bevel gear & intermediate
iii) Bearing No.- NJ2318ECP/NJ2317ECP of 2nd Intermediate (SKF/NTN/FAG/KOYO/equivalent brand)
Repairing of Gear Box 2 (Flender Make KZNS 320, Sl No.- 992351005 )
Dismantling, cleaning, assembly & repair of the complete gear box
Consumable item i.e Cotton waste, kerosene oil, chisel emery paper etc.
Repairing of dust seal cover of gear box
Repairing of bearing housing ( on gear box end of the output shaft) final finish size of housing bore. 270 ID x 100 width (Sl. No, 2.04 to 2.06) i) Cost of CI machinable electrodes
ii) Welding charges
iii) Boring charge on line boring machine size 270 OD x 255 ID x 100 mm width
Replacement of damaged components (Sl No. 2.07 to 2.11) i) Nut bolt spring washer (HT grade)
ii) Input pinion with bevel gear & intermediate
iii) Oil seal 180 x 150 x 13
iv) Oil seal 60 x 45 x 8
v) Bearing No.-22230 CC/C4W33 of Output Shaft (SKF/NTN/FAG/KOYO/equivalent brand)
Repairing of Gear Box 3 (Flender Make KZNS 320, Sl No.- 985251655 )
Dismantling, cleaning assembly & repair of the complete gear box
Consumable item i.e Cotton waste, kerosene oil, chisel emery paper etc.
Repairing of dust seal cover of gear box
Repairing of total housing thread of bolt
Replacement of damaged components (Sl No. 3.05 to 3.09) i) Nut bolt spring washer (HT grade)
ii) Input pinion with bevel gear & intermediate
iii) Oil seal 180 x 150 x 13
iv) Oil seal 60 x 45 x 8
v) Bearing No.-NJ 2311ECP of pinion shaft (SKF/NTN/FAG/KOYO/equivalent brand)
Total impact of GST for the purpose of CTC
SHYAM AND BROTHERS ENGINEERING WORKS (BID ID -1190628)
HINDUSTHAN INDUSTRIES (BID ID -1189713)
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Document
1.48 MB
BOQ
BOQ • 0.30 MB
Download all tender documents and submit your bid