Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹48.0 LAccepted-AOC 11 A KUTCHERY ROAD BALUGANJ AGRA 282001 UP | AGRA | UTTAR PRADESH | 282001 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹50.4 L+₹1.8 L (3.73%)Rejected-Finance 59 100 AJIT NAGAR GATE KHERIA AGRA 282008 | AGRA | AGRA | UTTAR PRADESH | 282008 | L2 | Rejected-Finance Being higher bidder | |
| 3 | L3₹51.6 L+₹3.1 L (6.34%)Rejected-Finance | L3 | Rejected-Finance Being higher bidder | |
| 4 | L4₹52.7 L+₹4.1 L (8.53%)Rejected-Finance 51 212D 3E K V NAGAR NEAR ADARSH NAGAR KHERIA MOD AGRA UP 282001 | AGRA | UTTAR PRADESH | 282001 | L4 | Rejected-Finance Being higher bidder | |
| 5 | L5₹54.4 L+₹5.9 L (12.1%)Rejected-Finance VILLAGE DEVRATHA NO 1 POST SHAHGANJ DIST AGRA U P | L5 | Rejected-Finance Being higher bidder |
Tender Value
₹59.6 L
EMD Value
₹1.1 L
Closing Date
28 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE(AF) Agra
HQ CWE(AF) Agra PIN 282008
ADDN/ALTN/IMPROVEMENT OF TRANSIT BLOCK AT OFFRS MESS AT AF STN AGRA
2023_MES_576963_1
80022-22/E8
Open Tender
Civil Works
Item Rate
180 days
GE(AF) Adm Area Agra
As per tender documents
8 documents required · 8 mandatory
₹1,000
GE(AF) Adm Area, Agra
₹1.1 L
Yes
29 Apr 2023
24 Jan 2023
7 Mar 2023
24 Jan 2023
28 Feb 2023
14 Feb 2023
Amount
Taking down cement plaster on brick or stone or concrete surfaces of wall etc , including raking out joints , hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for rendering 15mm thick on fair face of brick works or concrete surfaces of walls with CM (1:6) and finished even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 15mm thick on other than fair face of brick works or concrete surfaces of walls with CM (1:4) finished surface should be even and smooth including WPC @2% by weight of cement complete all as specfied and directed by Engr-in-Charge. Note :- Rate of Water proofing compound shall deemed to be included under this item.
M&L for rendering 10mm thick on concrete surfaces of ceiling with CM (1:4) and finished even and smooth without using extra cement complete all as specified and directed.
Complete removal of existing treatment of any type/description from ceilings / RCC surfaces etc with mechanical means/grinder complete all as specified and directed.
Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over any surfaces including 2mm thick Birla wall putty complete all as specified and directed.
Material & Labour for applying two or more coats of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification including 2mm thick Birla wall putty on internal/ceiling surfaces complete all as specified and directed.
M&L for scraping out loose mortar/concrete by chiseling/ wire brushing complete and applying rust removing solution (rebaklene solution) to exposed corroded reinforcement and applying a coat of epoxy primer (Nitozink primer from M/s Fosroc or equivalent as approved by GE) and filling deep depth with micro concrete, per manufacturer instructions providing and fixing of wire mesh of weight 2.5 Kg per Sqm and apply 25 mm average thickness in CM (1:4) mixed with liquid integral water proofing compound (complast 'X' recommended by the manufacture with gunitting machine at a pressure not less than 5 Kg/Sqcm finally rendering 10mm thick plaster in CM (1:4) using liquid integral water proofing compound (complast 'X' 421 i.e. from M/s Fosroc and Nitobound AR from M/s Fosroc or equivalent as approved by GE) in the proportion recommended by the manufacture complete all as specified and directed.
Demolition of cement concrete ( reinforced) infloor, other ground floor chajjas, landing slab and similar suspended work and including reinforcement cut on required to facilitats demolition and removing rubbish of any description in any position not otherwise specially provide for complete all as specified and directed.
M&L RCC 1:2:4 ( Type B 1 ) using 20 mm graded aggregate in slabs supported on walls , beams, columns and similar work etc . complete all as specified and as directed.
Use and waste formwork to soffits of suspended slab, slab supported on walls, columns, beams and similar work not exceeding 200 mm thick (Horizontal or sloping) , rough finished surface of complete all as specified and directed
Material and labour for TMT bar 10 mm dia and over cut to length, bent to shape reqd, incl cranking, bending, spirally for hooping, hooking ends and binding with 0.90 mm dia MS wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directed .
M&L for rolled mild steel section as in main and cross beams, hip and jack rafters, purlins or similar works posts where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates of Fe 410-W Gde E-250) quality A complete all as specified and directed by the Engr-in-Charge.
S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
M&L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with light shade of tiles over & including 15 mm thick screed bed in cement mortar 1:6, including dismantling of existing floor tiles complete all as specified and directed.
M&L for coloured non skid ceramic tiles 7 to 8 mm thick joint less (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floor etc set and jointed in neat cement slurry and pointed with white or coloured cement to match with the shade of tiles over & including 15 mm thick screed bed in cement mortar 1:6, including dismantling of existing floor tiles complete all as specified and directed.
M&L for glazed ceramic designed coloured tiles 350 x 450 mm x 7 mm thick on vertical surface such as dado/skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles over and including 10 mm thick rendering in cement mortar 1:4 including dismantling of old tiles complete all as specified and directed.
Demolition of plain cement concrete (unreinforced) of any mix / grade in ground floor and pavings or sunken slab including removal of debris out off the AF station premises / MOD land etc complete all as specified & directed .
M & L for cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in sunken floor for correction of slope etc complete all as specified and as directed.
Taking down chowkats with shutters (without taking down of shutter from the frames) exc 1.50 Sqm and n.exc 4.00 Sqm each complete all as specified and directed.
Taking down shutter of any description exc 1.00 Sqm and n.exc 2 Sqm each complete all as specified and directed.
Taking down shutter of any description n exc 1.00 Sqm each complete all as specified and directed.
S&F solid WPC door frames of size 100mm x 50 mm single rebate made out of solid WPC with standard Grade Density 780 Kg/CBM single side prelaminated PVC sheet and edges will be painted to match with prelaminated sheet as per specification and drawing.
S&F for Factory Made Solid PVC Moulded door Shutter,with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing.
S&F 100 mm size butt hinges stainless steel medium weight complete all as specified and directed.
S&F 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.
S&F 150mm size aluminium anodised alloy handles fabricated type complete all as specified and directed. .
S&F 300mm long mild steel, sliding door bolt, with hasp and staple (bolt type) cast or extruded section and fixing bolts sliding bolt not less than 16mm dia of shoot/bolt of extruded section complete all as specified and directed.
M&L for 20-25 mm thick hand cut kota stone slab of size 540 x 540 mm to 560 x 560 mm in flooring or in trades of steps over 15 mm thick screed in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing rounding/moulding of edges and dismantling of old tiles complete all as specified and directed.
M&L Kota stone slab 20-25mm thick in riser of steps, skirting, dado & pillar over 10mm thick plater in CM (1:4) & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing and taking down rendering complete all as specified and directed.
S&F vitreous china premium/1st quality wash down water closet wall hung EWC with P trap white/ivory/off white including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe CP 32mm dia and incl. plastic seat cover as recommended by manufacturer closed pattern with matching colour flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, incl 100mm dia cast iron sanitary connections—short connections pipe of length upto 600 mm and Cutting holes in or through walls, packing with PCC 1 : 2 :4 complete and taking down existing of any description/size complete in all respect all as specified. Make : Cera Amigo C8933 or Parryware Verve AM C022G or Hindware cat part No 92541
S&F flushing cistern of PVC 10 ltr. cap. with dual flushing system, white colour, valveless syphonic action type, , low level, with inlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and taking down existing of any description/size complete in all respect all as specified and directed. Make : Hindware (Sleek Essence Dual Flush) or Cera (Corona) or Prayag (Vintage) equivalent from Parryware
S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.
S&F Corner unbreakable glass shelf 10 mm thick set of three with SS brackets fixed to wall with rawl plug and SS bolts complete all as specified and directed
S&F in repair vitreous china white counter Wash basin, oval shape of size 560 x 410 x 180 mm or nearby size including CP waste coupling and 32mm dia waste pipe etc. complete all as specified and directed. Make :- Prayag Cat Part No. 4790/ Cera Cat Part No. S2030136/ Hindware Cat Part No. 10017
S&F in repair central hole basin mixer, fancy type, brass chromium plated, with round spout with popup waste system, including plugging and fixed, suitable for 15mm bore pipe complete all as specified and directed. Make :- Prayag Cat Part No. 7950/ Jaquar Cat Part No. QQP-7167BPM/ Plumber Cat Part No. PST 3104
M & L for 18 to 20mm thick granite (any type) work (table rubbed and polished) as in skirting, dado, steps, pillars, jambs, cooking platform, window cills and like in cement mortar 1:4 including pointed with white cement (1:2) using marble dust with admixture of pigment to match the shade of granite stone over screed bed 10 mm thick in cement mortar 1 : 4 including moulding of edges complete all as specified and directed.
S&F in repair Chromium plated brass shower rose with swivel joints 125 mm dia with long arm including fixing to steel pipe or union 15 mm bore complete all as specified and directed. Make :- Prayag Cat Part No. BS-76/ Jaquar Cat Part No. OHS-1789/ Plumber Cat Part No. ITP 5001
S&F in repair CP brass wall mixer 3-in-1 system with provision for both over head shower and telephonic shower with tube telephonic shower complete with wall flange and 115mm long bend pipe, complete all as specified. Make : Plumber Cat Part No. 6480/Jaquar Cat part COP-281PM/ Plumber Cat part ARA-3101LB
S&F for 15 mm Bib taps long body with flange, cast copper alloy fancy type chromium plated with capstan head screwed down screwed for iron pipe of 15mm boreand fixed in repair complete all as specified and directed. Make:PRAYAG CAT PART No 8108/Equivalent to Jaguar/MARC
S&F in repair stop valve 15 mm nominal bore cast copper alloy, fancy type, chromium plated, concealed type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified and directed. Make :- Prayag Cat Part No. 6810/ Jaquar Cat Part No. COP-057PM/ Plumber Cat Part No. ARA-2105M
S&F 15 mm bore Angular Stop Cock with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed one ends for 15mm bore of iron pipe or for union and fixed in position complete in all respect complete all as specified and directed.
S&F in repair soap dish, brass chromium plated, oval shaped of size 100x50mm (approx), fixed to wall with PVC gully and CP screws complete all as specified and directed. Make :- Prayag Cat Part No. BS-55/ Jaquar Cat Part No. AHS-1531/ Plumber Cat Part No. U-0913
S&F in repair fancy type chromium plated towel rack 600 mm long without lower hangers but with 3 hooks stainless steel fixed to wall with PVC gully and CP screws complete all as specified and directed. Make :- Prayag Cat Part No. BA-12/ Jaquar Cat Part No. 1181FHS/ Plumber Cat Part No. ER-8080
S&F 32 mm bore high density polyethylene pipes (HDPE) of pressure rating 6 Kgf/cm2 fixed complete to walls, ceilings or in floors etc. with all fittings such as ends elbow, union etc., complete all as specified and directed.
S & F PVC connections 15 mm size with PTMT nuts of length 450 m comlete all as specified and directed.
S&F GI tubes of medium grade with all fitting and fixed complete to walls and ceilings or laid in floors of 15 mm dia including taking down old pipe complete all as specified and directed.
S&F tubes medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors 20 mm dia including taking down old pipe complete all as specified and directed.
Taking down & Refixing of old steel tubing and connections in new or old position (walls, ceilings, floors, etc) of 15 mm bore complete all as specified and directed.
Taking down & Refixing of old steel tubing and connections in new or old position (walls, ceilings, floors, etc) of 20 mm bore complete all as specified and directed.
S&F in repairs 100mm dia stainless steel gratings complete all as specified and directed.
S&F in repairs steel tank cover with zinc coating of dia 500mm and height 150mm of cut spherical shape and gas welded of spike 2mm dia and 50mm length at 50mm c/c both ways in zig zag motion with 75mm long MS hinges, Hasp and staple of 75mm size fixed to existing PVC water storage tank of any capacity and binded with galvanised, 2 strand steel barbed wire 2.24 mm dia barbed with 2mm barbs at 75 c/c complete all as specified and directed.
M & L for PCC 1:3:6 type C-2 using 40mm graded stone aggretgate, as in base for PVC tanks complete all as specified and directed.
S&F in repairs for 20 mm stop valve, cast iron , screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe of 20mm bore of pipe fixed as in repair complete all as specified and directed.
S&F fix in repairs tripple layer 500 ltrs rotational moulded polyethlene water storage tanks (cylindrical vertical with closed top) white in colour hoisted and fixed in position including 20mm brass float valve complete all as specified in SSR Part-I and complet all as specified and directed.
M&L Cast iron soil, waste and vent pipe, Centrifugal type 100mm bore, spun cast in any length, with or without ears, with lead joints, fixed to walls with and including stack clamps, nuts , bolts etc. and making necessary connections complete all as specified including taking down of existing unserviceable pipe complete all as specified and directed.
M&L Cast iron soil, waste and vent pipe, Centrifugal type 100 mm bore, spun cast in any length, with or without ears, with lead joints, laid in trenches including necessary earth work complete all as specified.after including down of existing unserviceable pipe complete all as specified and directed.
M&L Cast iron branch pieces single Centrifugal type (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches, suitable for 100 mm bore pipe, fitted with oval access door jointed with lead joint, as in repairs ,complete all as specified and directed.
M&L CI Cowl Centrifugal type suitable for 100 mm bore pipe as in repair complete all as specified and directed.
M&L Cast iron bends/Tee duck foot or heel rest, radius for 100 mm bore pipe, complete all as specified and directed.
M&L Salt-glazed stoneware gully traps,Centrifugal type 150x150mm size, square or round mouthed, type 'P' or 'S' incl CI grating fixed in repair complete all as directed and specified.
S&F in repairs 110mm dia PVC (SWR) pipes single socketed, in any length, laid in trenches or in floors / fixed to walls including taking down of old pipe complete all as specified and directed.
S & F bend suitable for 110mm dia PVC (SWR) pipe including clamps complete all as specified and as directed
S&F in repair 110 mm dia PVC (SWR) 'P' trap of any type complete all as specified and directed.
M&L 75mm thick PCC 1:3:6 type C2 (using 40mm graded agg) as in plinth protection paving etc, finished surface even and smooth without using extra cement including demolition of old cement concrete complete all as specifie and directed by Engr-in-Charge.
M&L 75 mm thick PCC 1:4:8 type D2 for sub base using 40 mm graded aggregate complete all as specified and directed.
M&L Machine pressed coloured precast conctete interlocking paver block with grey cement and with pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade including 25mm thick sand cushioning complete all as specified.
M&L for preparation of old treated steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square meter, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings including taking down of old plaster and putting aluminium channel in groove of required size complete all as specified and directed. Note : Making grooves(of uniform size 15 mm x 15 mm) shall be included in quoted rates.
M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint including one coat of red oxide complete all as specified and directed.
Dismantling of existing roof treatment including tar felt, cement plaster, etc from roof surfaces including cleaning the surface and removing the debris from site complete all as specified and directed.
Demolition of cement concrete (unreinforced ) above ground floors n exc 15cm thickness i.e from RCC roof slabs/terrace complete all as specified and directed.
M&L PCC ( 1:2:4) type B0, padding in averaging on RCC roof slab or terrace with using WPC @ 2% by mix weight of cement including finishing even and smooth with using extra cement complete all as specified and directed. Note : Rate of Water proofing compound shall deemed to be included under this item.
M&L rendering or screed bed 10 mm thick in CM 1:3 in averaging on RCC roof slab/terrace surfaces with mixing of WPC @ 2% by wt of cement including finishing even and smooth without using cement complete all as specified and directed. Note : Rate of Water proofing compound shall deemed to be included under this item.
M&L for water proofing treatment to roof with APP based polymeric membrane, 3 mm thick (min.) consisting of 90 to 100 micron thick central core of HMHDP film and standard weight of 3.00 kg/sqm reinforced with polyster non woven fabric ( weighing n. less than 160 gm / sqm ) shall be applied over and including applying a coat of hot blown bitumen 85/25 conforming to IS-702 @ 1.20 Kg/Sqm over a coat of bituminous primer @ 0.30 ltrs/Sqm surface, application of APP modified membrane and joint shall be by torch application. The overlaps shall be minimum 100 mm on the transverse direction and 75 mm on longitudinal direction complete all as specified & directed.
M&L for 40 mm thick locally availavle brick tiles laid over and including 15 mm thick screed bed in cement mortar 1:4 . The cement mortar screed shall be mixed with polymer based liquid water proofing compound as per manufacturers instructions and joints of tiles shall be filled with CM 1:3 mixed with crude complete all as specified and directed. Note : Rate of Water proofing compound shall deemed to be included under this item.
M&L cutting out cracks to V-section in existing roof slab or terrace, cleaning out, wetting, grouting, with cement sand slurry in 1:3 with mixing of WPC @ 2% by wt of cement complete all as specified and directed. Note : Rate of Water proofing compound shall deemed to be included under this item.
S & F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleats for fixing etc. complete all as specified and directed.
S & F powder coated anodised aluminium window and ventilator shutter, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing cleats, glazing clips, rubber packing, anodised aluminium snap beading, screw, anodised aluminium fittings such as peg stays 150mm long (1 no.), hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified (Top / Bottom 20736=0.547kg/Rm complete all as specified and directed.
S & F 4 mm thick sheet glass ordinary quality and glazing complete with beads fixed with screws in square n exc 0.5sqm in each pane complete all as specified and directed.
Supply and fixing stainless steel wire cloth, 0.40 mm nominal dia of wire and average width of aperture 1.60mm including necessary arrangements to fix in aluminium frame complete all as specified and directed.
Excavation in trenches in soft/loose soil not exceeding 1.50 metre wide and not exceeding 1.50 metre deep for foundations pipe line etc or for shafts, wells, cesspits, manholes, pier holes etc and not exc 10 sqm on plan and not exceeding 1.50 metre in depth and getting out complete, all as specified.
Returning filling in, including speading, levelling, watering and well ramming excavated soil in layers not exceeding 25 cm thick each, in trenches, after the pipes have been laid and tested complete all as specified and directed.
Removing excavated soil to a distance not exceeding 50 metre and deposting where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed.
M&L for Plain cement concrete (1:4:8), Type D-2, using 40 mm graded stone aggregate as in concrete bed to drain pipes laid to falls in trenches in any depth including packing under and hauncing atainst the sides of pipes for 150 mm bore pipes with concrete after the pipes are laid and tested complete all as specified and directed.
M&L for 150 mm bore, Salt glased stoneware drain pipes (Grade 'A') laid in trenches at any depth including jointing and testing complete all as specified and directed. Note : Excavation & earth work & concrete for bed and haunching of pipe shall be measured and paid separately.
M & L for Plain cement concrete (1:2:4) type B-2 using 40 mm graded stone aggregates as surface channel/drains inside the manholes and like including weathering, sightly rounded or chamfered angles and throating as directed and provision of necessary formwork to any extent and finished exposed surface even and smooth without using extra cement complete all as specified and directed.
M&L brick work with fly ash bricks straight or curved on plan exc 6 m mean radious, old size brick built in CM (1:6) including demolition of brick work complete all as specified and directed.
M & L for PCC 1:3:6, type C-2 using 40 mm graded stone aggregate as in foundation,filling and mass concrete complete all as specified and directed.
M&L for Cement concrete (1:2:4) type B-1 using 20mm graded machnically crushed stone agg as in benching, coping, plinth course, bands stops etc incl necessary form works complete all specified and directed.
M&L for PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) as in sub base or foundation, filling and mass concrete etc complete all as specified and directed.
S&F stainless steel tubing of 25 mm dia chromium plated min. 1.0 mm wall thickness as in curtain rod complete incl S&F 02 Nos stainless steel brackets and finials fency type, stops fixed with ss screws etc all as specified & directed as in repair . Note : For the purpose of mesurement and payment running length of curtain rod only shall be considered.
S&F factory made pre-laminated PVC solid board 18-20 mm thick prelaminated on both sides with wooden finished on one side and white finished lamination on other side as in cup-board front shutters complete fixed in position in all respect all as specified and directed.
S&F solid WPC door frames of size 62 mm x 32 mm single rebate made out of solid WPC with standard Grade Density 780 Kg/CBM single side prelaminated PVC sheet and edges will be painted to match with prelaminated sheet as per specification and drawing.
S&F Stainless Steel (304 Grade) Finished Butt Hinges 100mm with stainless steel screws complete all as specified and directed.
S&F Stainless Steel (304 Grade) Finished Handles 150 mm with stainless steel screws complete all as specified and directed.
S&F Stainless Steel (304 Grade) Finished Square Tower Bolt 200mm long with stainless steel screws complete all as specified and directed.
S&F Hasp and staple 100 mm wide, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.
S&F for factory made fully glazed/ wire gauge (single/double piece) both side PVC prelam door shutter 33-35 mm thick (Style) consisiting of frame made out of mild steel tubes of size 19mmx 19mm (19 gauge) for top and bottom rails and 19mmx19mm (19mm gauge)in styles. Single pieces plain coloured PVC sheets 5mm thick to be used to cover styles and rails. PVC sheet strip of 20 mm width stuck inside with solvent cement for styles & plain coloured PVC Sheets for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail. Panel will be wire gauged and tighten firmly and fitted as per manufacturers instructions including stainless steel wire cloth, 0.25 to 0.36 mm nominal dia of wire and average width of aperature 1.4 mm to 2.0 mm and Aluminium XPM in rhombus shape in one peice from top rail to bottom rail all as specified and directed by Engr-in-Charge. Note : All screws shall be self tapping chrome plated.
S&F Stainless Steel (304 Grade) Finished Floor Door Stopper with stainless steel screws complete all as specified and directed.
S&F Framed work such as grills,gratings, etc. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.
S&F for Solid PVC Wall Lining consisting of 5mm thick coloured PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed.
S&F for 5mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC frame as per manufacturers instruction, specification complete all as specified and directed.
S&F solid WPC door frames of size 125mm x 65 mm double rebate made out of solid WPC with standard Grade Density 780 Kg/CBM single side prelaminated PVC sheet and edges will be painted to match with prelaminated sheet as per specification and drawing.
S&F anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge
Taking down old unserviceable copper/aluminium point wiring (light, fan, socket , power socket and bulk head fittings) on surface wiring on wooden batten/casings & caping complete, including fixture and fittings such as switches, ceiling roses,pendents holder, regulators, sockets and defective main switch/DB/MCB/Metal plug etc. and making good disturbed surfaces of walls complete all as specfied and directed.
Material and labour for light/Fan/Exhaust fan point wiring in concealed conduit complete with ISI marked 1.5 Sqmm PVC insulated unsheathed multistranded single core cable with copper conductor (FRLS) 1100 volts grade drawn through and including PVC rigid conduit not less than 20 mm or higher dia ISI marked as required at site including conduit accessories such as Junction Boxes, Inspection Covers etc, modular box ISI marked suitable for modular switches & sockets of necessary modules as per site requirement including modular plates & covers for switches sockets, regulators etc. including providing of 1.5 Sqmm PVC insulated FRLS multistranded unsheathed copper conductor as earth continuity conductor and connecting to common earth dolly including cutting chasesing and making good disturb surface area complete all as specified. Note- Rates include the cost of modular plate modular boxes and covers of suitable modules as required at site.
All as per srl item No 108 above but for call bell point complete all as specified and directed.
All as per srl item No 108 above but for 5 pin 5 amps socket outlet independent board complete all as specified and directed.
All as per srl item No 108 above but for 3 pin 5 amps socket outlet on the same board with other switch complete all as specified and directed.
All as per srl item No 108 above but for one light point controlled by two Nos 2 way switches complete all as specified and directed.
M&L for point wiring with 2.5 sqmm single core 1100v grade FRLS PVC insulated unsheathed multistranded copper conductor with in and including PVC concealed conduit medium grade with all fittings including modular boxes, plate and cover suitable for an independant 6 pin 15/16 amps socket outlet ,including 2.5 sqmm single core 1100v grade FRLSH PVC insulated unsheathed multistranded copper conductor as earth continuity conductor connected to comman earth dolly including cutting chases in walls / floors for concealed conduiting and making good disturbed surface area to match with the adjoining surface all as specified and directed.
All as per Srl item No 113 above but using 4 sqmm copper conductor wire with 4 sqmm earth wire complete all as specified and directed.(For Air Conditioner).
Supply and Fixing Modular switch single pole, one way 6 Amps one module complete all as specified and directed.
Suppy & Fixing Modular Switch 2- way, 5/6 amps flush type 230 volts complete all as specified and directed.
Supply & Fix Modular bell push flush type 5 amps SP 240 volts complete all as specified and directed.
Supply and Fixing Modular switch single pole, one way 16 Amps one module complet all as specified and directed.
Supply and Fixing Modular socket 6 Amps multipurpose 2 in 1- 2/3 pin combined 2 module complete all as specified and directed.
Supply and Fixing Modular socket 6/16 Amps multipurpose 2 in 1 -2/3 combined 2 module complete all as specified and directed.
S&F bell ding dong AC , 230 VOLTS, single pole complete all as specified and directed.
S&F ceiling rose 65 x 50mm three terminals complete all as specified and directed.
S&F Modular fan regulator, electronic stepped type 5 stage speed regulation, ISI marked complete all as specified and directed.
S & F lamp holder/batton holder/angle holder insulated body with bakelite back plate suitable for fittings complete all as specified and directed.
S & F modular type T V Co- axial socket , 1 Module including junction box , sheet cover and frame complet all as specified and directed.
S & F modular type Tele Phone socket , 1 Module including junction box , sheet cover and frame complet all as specified and directed.
Supply and laying non metalic PVC conduit 20 mm bore medium grade totally concealed for routing wire for TV/Telephone with all fittings (ISI Marked) complet all as specified and directed.
S&F Wall/surface mounted type LED light fitting batten type complete with LED 1x 20 watt (4 feet long), extruded aluminium body with heat sink provided for efficient heat dissipation and integrate electronic drive complete with all accessories internally pre-wired and including connecting up with 3 core twisted flexible copper conductor cable complete all as specified and as directed. Make : Halonix Cat part No- HLB-03-2Q-CW-AL-SQ , ORIENT Cat part No-LBLN-20-C-AL /Phlips Cat part No- BN021C LED22S PSU CW GR
S&F Wall/surface mounted type LED light fitting batten type complete with LED 1x 10 watt (2 feet long), extruded aluminium body with heat sink provided for efficient heat dissipation and integrate electronic drive complete with all accessories internally pre-wired and including connecting up with 3 core twisted flexible copper conductor cable complete all as specified and as directed. Make- ORIENT Cat part No-LBLN-10-C-SQ/Phlips cat part- BN021LED12S6500PSUGR, Halonix Cat part No- HLB-03-10-CW-AL-SQ
S&F Decorative wall mounting light fittings with opal glass diffuser and stainless steel body suitable for and including LED Lamp 7-9 Watt (B-22 base) complet all as specified and directed. Make : Halonix Cat Ref HHW048 08CF HALONIX/ORIENT/Philips
S & F LED smart Lamp of inverter type of 9 watt,6500 K ,230 volts complete all as specified and directed. Make:Havells LHLDEGEDML8O009 or equivalent in Philips/crompton
S&F in replacement of Lithium based Energy Efficient integrated Solar Street light of 16 Watt in single FRP body with dyly plylurethane coating (Camouflage color),encases with Monocrystalline solar PV Panel of 53/55 Wp, litium battery 11.1/12.8V, 28.6AH with inbuilt BMS, IP 65 high brightness W LED 160-180 Lm/Watt) lamp with Aluminium reflector for batter light distribution, CRI>70, Colour Tempeture 57000K-65000K micro controller based charge controller cumdriver automatic dimming function (First Four hours at full brightness & rest of the at lower light level with PIR motion sensor), dust to dawn opertaion suitable to working temperature -10C to +55C, weight more than 12-14 Kg with suitable size of FI bend pipe, adjustable MS Clamp suitable for pole/ wall mounting etc complete all as specified and directed Make -Axxon Tech Industries /Okaya Power Pvt Ltd.
S&F ceiling fan 1200mm sweep, BLDC 5 Star ceo;omg fam(without remote) 32 watt, single phase AC 230 volts 50Hz complete with connecting to ceiling rose or connector using PVC insulated and over all sheathed 3 core cable of size 0.75 Sqmm with flexible copper conductor including taking down existing celing fan and depositing to MES yard all as required at site or directed.
Supply and fixing electric water heater, storage type ABS body with stainless steel inner tank and heating element upto 2 KW capacity, 25 litre, BEE 5 star rating complete with all accessories such as safety valve, thermostate, connection pipe, NRV etc. complete all as specified and directed. Make : Crompton model SOLARIUM NEO/ Bajaj model CALENTA DIGI
M & L for providing/ cutting the round/Squire hole of required size in wall finishing the same for distrubed surfaces and supply and fixing exhaust fan 300 mm sweep steel body, Heavy duty single phase IP 55 & ISI, 230 Volts 950 RPM complete with louvers shutters and including PVC insulated three core 1.5 sqmm copper cable from ceiling rose to exhaust fan complete all as specified and directed.
M & L for providing/ cutting the round/Squire hole of required size in wall finishing the same for distrubed surfaces and supply and fixing exhaust fan 250 mm sweep PVC body, AC, Single phase, 230 volts 1200 RPM complete with louvers shutters and including PVC insulated three core 1.5 sqmm copper cable from ceiling rose to exhaust fan complete all as specified and directed.
Dismantling and taking down old serviceable Energy Meters of any type / capacity after necessary disconnection of electrical wires etc. and marking the Quarter No on each meters with parmanent marker pen and keeping in safe custody for re-fixing /reconnection in new meter cabinet all as specified and as directed.
Dismantling of existing meter panel board removing existig energy meter keeping safe custody and Design ,Supply, installation, testing and commissioning of indoor type wall mounting size min (980X 650X245), Polycarbonate CPRI approved OEM Meter Panel. The panel shall be made of modular POLYCARBONATE THERMOPLASTIC ENCLOSURES which should be UV resistance in accordance with IEC 61439-1, clause 10.2.4: The panel type wall mounted on mounting structure RAL 7016. The meter panel should be anti-acid & anti corrosive & fully transparant Door foor meter vision. Degree of protection against mechanical load should be IK08 (5 Joule) in accordance with IEC 62262. The manufacturer of panel shall submit a copy of CPRI TEST REPORT IN POLYCARBONATE only . DEGREE OF INGRESS PROTECTION IP65 IN ACCORDANCE WITH IEC 60529. The gasket should be internally embedded made of polyurethane . The manufacturer of board/panel SHALL submit a copy of TYPE TEST REPORT of a board made out of Polycarbonate thermoplastic panel in accordance with IEC 60439-1. The CPRI test report shall have mention of following tests performed and passed out satisfactorily: Temperature Rise, Dielectric Properties, Short circuit withstand current – Rated peak & short time withstand current and Rated Conditional Short Circuit Current, Effectiveness of Protective Circuits. The board manufacturer must submit the copy of type test reports for Polycarbonate Thermoplastic Board only. Test Reports submitted of other material of construction like MS, SS will not be applicable.. The panel should passed glow wire test 960oC in accordance with 60695-2-11 flame retardant and self-extinguishing complete all as directed with and incl the following
(a) Provision for existing electric energy meter - 04 nos in separate chamber with locking arrrangement. (a) Four pole MCCB 63 Amps with breaking capacity 16 KA having fixed thermal and fixed magnetic release and spreader link at both incoming and incomming side - 01 No. (b) MCB DP 32 Amp 10 KA , C Curve - 4 Nos (To be connected with 4 Nos Meters) (c) MCB DP 06 Amp 10 KA, C Curve - 1 No (For common lighting + Bldg Security Lights) (d) Ten Nos terminal blocks provided for output supply. (e) MCCB/MCB Operated by flip Cover (f) LED Indicating lamp - 03 Nos. (g) Internal wiring with 1100Volt grade 6.0 Sqmm FRLS PVC insulated multiflexible copper wire of sizes duly crimped with copper lugs of suitable size & type . (h) Refixing the energy meter in this new meter cabinet including all necessary electrical connection. Make :- Hansel / Schneider/ L&T
Supply and fix in replacement of sheet metal enclosure distribution board, single pole and neutral, AC, 240 volt, 08 way, double door with suitabel size copper bus bar and metal door with IP - 43 and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed.
S & F MCB single pole 240 volts, 'C' curv of rating from 6 to 32 amps, with rupturing capacity 10 KA,including providing thimble for out going cables complet all as specified and directed..
S & F MCB SPN 240 volts, 'C' curv of rating from 6 to 32 amps, with rupturing capacity 10 KA, including providing thimble for out going cables complet all as specified and directed.
Taking down old unsv sub main wiring any type and size aluminium/ copper incl batten/ conduit and making good disturbed surface to match with existing complete all as spd and directed.
M & L for submain wiring with two single core PVC insulated FRLS flexible Copper conductor cable of size 6 sqmm and one single core PVC insulated FRLS flexible copper conductor cable green colour of size 6 Sqmm as earth lead in & including concealed PVC conduit medium grade cutting chases two wall for laying conduit and making good the disturbed wall surfaces to match with existing specification complet all as specified and directed.
S & F in replacement sheet metal single pole and neutral enclosure with socket, plug top complete with one single pole MCB of 20 Amps, 240 volts complete all as spd and directed.
M&L for removal of existing old unsv earthing complete and providing new earthing with galvanised steel earth plate electrode, 600 x600 x 6mm thick burried directly in the ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below ground level connected to galvanised iron wire 4mm dia as earth lead by means of bolts, nuts and washers of GI up to test point, GI tubing 15 mm bore medium grade protection pipe, GI watering pipe 20 mm bore light grade with funnel and wire mesh, charcoal, salt complete all as per SSR with PCC chamber, 50mm thick RCC cover in 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with 8mm dia TMT bar @ 80mm c/c both way including earth work in any type of soil, removal of surplus soil to a distance n.exc 50 m and connecting, testing on completion all as shown on electric plate No 03 of SSR -2009 Part I complete all as specified and directed. (Note: Excavation and earth work is deemed to be included in the rates quoted).
Supply fo "Lithium based Energy Efficent Integrated Solar Light of 40 Watt" in Single FRP body with duly Polyurethane (Camouflage color), encases with Monocrystalline Solar PV Panel of 78/80Wp, Lithium Battery 11.1/12.8V, 39.6AH with inbuilt BMS, IP 65, High brightness W-LED(180-200lm/watt) lamp with Aluminum reflector for better light distribution, CRI>70, Color Temperature 5700K-6500K, Microcontroller based charge controller cum driver, automatic dimming function (first four hours at full brightness & rest of the time at lower light level with PIR Motion Sensor), Dusk to Dawn Operation, suitable to working temperature : (-) 20C to (+) 55C, weight not more than 16-18Kg with adustable MS clamp suitable for pole/wall mounting etc complete as required. Protections: Short Circuit, overload, Reverse polarity and battery protections. Firm should provide Vital Parameters Test report from NABL accredited lab and should be of made in India with CE & ROHS complaint. Supply of Medium class tubular galavanized pole 6 meter 75mm, with 16mm thick MS base plate of size 250mm x 250mm with 4 Nos 25mm hole and foundation bolt of 20mmx750mm long including excavation and PCC foundation etc, complete as required.
Taking up and down old/ unsv GI tubing with all fittings of size 25 mm dia. complet all as specified and directed. (Necessary earth work will be measured and paid seperately.
M & L for supply, fixing and laying GI water tubing 25 mm bore medium grade ISI marked with all required fittings such as bends, elbow, tees, short pieces, connector, check nuts and threading complet all as specified and directed at site.
M & L for replacement of existing unsv Gun metal gate valve ISI marked with iron wheet head screwed both ends for pipe of size 25 mm complet all as specified and directed.
Excavating in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation etc or for laying for pipes etc n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out in any type of soil complete all as specified and directed.
Returning, filling in, trenches including spreading, levelling, watering and well ramming in layers not exc. 25 cm in any type of soil complete all as specified and directed.
Removing surplus excavated material n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed.
deva engineers
Shiv Krishan Associates
Sethi Brothers
M/s M S Sharma and Co.
M/s Shrangi Rishi Construction
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .