Civil and Electrical works for Pannaikadu 110/22 KV SS

A.1 Clearing Juliflora Jungles with Uprooting and disposed from the Site As per the direction of Site Engineer including Cost of all labour, lead, lift, etc., complete

Site Grading and Levelling and Sectioning by Earth moving Machineries As per the direction of Site Engineer including cost of all labour ,lead, lift etc complete

Collection, Supplying, Stacking and Spreading & Filling of red gravel including compaction,cost of all materials lead lift labour etc complete As per the direction of Site Engineer.

a) Earth work excavation for foundation in hard stiff clay, stiff black cotton hard red Earth , shales, muram, gravel, stoney Earth and Earth mixed with small size boulders with an initial lead, lift, etc, complete.

b) Earth work excavation in SDR Not requiring blasting in Earth work excavation.

Providing anti termite treatment in 4 stages I) immediate after Earth work excavation and before Laying foundation Concrete II) after reFilling for sides of foundation III) Before Laying of flooring Concrete IV) outside of basement upto 1.0 m alround the buildingusing termite 250 ml for 5lit of Water etc. complete.

Supplying and Filling of M. Sand in foundation and basement with well Water and consolidation As per specn.incliding cost of all materials labour, lead, lift, etc., complete.

PCC 1:3:6 mix using 40 mm HBS Machine crushed Metal for foundation with out form work including cost of all labour ,materials,Water Charges , lead, lift, curing, etc., complete.

RCC 1:1.5:3 using 12 to 20 mm ( M 20 ) (Machine crushed) Metal for raft foundation without formwork including cost of all materials,Water Charges, labour lead, litf, etc., complete.

RCC 1:1.5:3 using 12-20 mm ( M 20 ) Graded Hard Machine Broken Granite Stone, including cost of all materials, Form Work, Centering, Curing, all labour Charges, lead, lift, etc. complete for column footing excluding cost of Steel Reinforcement.

RCC 1:1.5:3 using 12 to 20 mm ( M 20 ) (Machine crushed) Metal for column Concrete with formwork including cost of all materials, Water Charges labour lead, litf, etc., complete. But excliding cost fo Steel Reinforcement (by using Mixer Machine).

RCC 1:1.5:3 using 12 to 20 mm ( M 20 ) HBS Metal (Machine crushed) for contineous lintel with form work including cost of all materials, Water Charges ,lead, lift, etc., complete.(by using Mixer Machine).

RCC 1:1.5:3 using 12 to 20 mm ( M 20 ) HBS Metal (Machine crushed) for Sun shade 60cm. Projection 80 mm thick at Wall end and 50 mm thick at free end and loft, with form work including cost of all materials, Water Charges , labour, leas, lift, etc., complete. (by using Mixer Machine).

RCC 1:1.5:3 using 12 to 20 mm ( M 20 ) (Machine crushed) Metal for " T " Beam, bed block with centering shuttering including cost of all material, Water Charges ,lead, lift, etc, complete, but excluding cost of Steel Reinforcement

RCC 1:1.5:3 using 12 to 20 mm ( M 20 ) (Machine crushed) for roof Slab Concrete of 130 mm thick with formwork including cost of all materials, Water Charges, labour, lead, lift, centering shuttering , curing, etc., complete. But excluding cost of Steel Reinforcement.

RCC 1:1.5:3 using 12 to 20 mm including cost of all materials, form work, centering, curing, all labour Charges, Water Charges , lead, lift, etc. complete. But excluding cost of Steel Reinforcement. For Precast Cover Slab,Fencing Retaining Wall,Culvert Wall etc; Concrete.

RCC. 1:1 1/2:3 mix using 12 mm to 20 mm HBS Metal(Machine crushed) with formwork for grade Beam,Plinth Beam etc including cost of all labour, materials, Water Charges, lead, lift, etc, complete. But excluding cost fo Steel Reinforcement (by using Mixer Machine).

RCC 1:1.5:3 using 12-20 mm graded hard Machine broken granite stone with Steel mould, including cost of all materials, form work, Water Charges ,centering, curing, all labour Charges, lead, lift, etc. complete. But excluding cost of Steel Reinforcement. For Road crossing duct Culvert Slab Concrete with 230 mm thick.

Providing Concrete Road with R.C.C 1:2:4,150 mm thick using 12 to 20 mm Metal by using paving Machinery with compaction including cost of materials leads and lifts etc.complete.

Supplying and Fabricating and Placing in position of MS / RTS Steel Reinforcement for RCC works including labour for cutting, bending, tying and Fixing in position As per Specification including cost of all materials, lead, lift, labour, cost of Binding Wire, etc., complete.

Brickwork in CM 1:5 mix using bricks of size 9"x 4 3/8"x2"3/4" for Super Structure including cost of all materials, Water Charges , labour, lead, lift, curing, etc., complete. By using II Class Champer Burnt Bricks

Brickwork in CM 1:3 mix using II Class Chamber brick of size 9"x 4 3/8" x 2 3/4" for bath, fol, brick on edge, partition Wall, Super Structure including cost of labour materials, curing, lead, Water Charges, lift, etc., complete.

PCC 1:3:6, using 20 mm HBG Metal foundation without form work including cost of cement, all materials,Water Charges, labour, lead, lift, etc. complete.

PCC 1:2:4, using 20 mm HBG Metal foundation with form work including cost of cement, all materials,Water Charges , labour, lead, lift, etc. complete.

PCC 1:2:4, using 20 mm HBG Metal foundation with out form work including cost of cement, all materials, labour, lead, lift, etc. complete.

Labour Charges for transporting from casting yard to curing tank,curing tank Cable Duct, aligning and Fixing of RCC Precast Cover Slab as directed by the Site Engineer including all labour lead lifts etc complete

Supply and Fabrication, Transport & Fixing of GI angles for Cable Duct with anchorage and placing in position as directed by the Engineer at site including cost of angles,cutting and all labour, lead, lift, etc. Complete

Supply ,Labour Charges for fabrication, Fixing in position of MS rail with proper anchorage by using welding and cutting to the required size and length anf Fixing over transformer Plinth As per departmental Specifications including cost of labour, transport, placing in position, lead,lift etc complete.

Providing projected border of 7.50 cm width on top of parapet Wall in CM 1:3 mix 12 mm thick including cost of all material labour Charges,Water Charges,, lead, lift, curing etc., complete.

Providing projected border of 20 cm. width for Plinth Beam in CM. 1:3 20 mm thick including cost of all materials, labour, lead, Water Charges, lift, etc., complete.

Plastering with CM.1:5 mix using 12 mm thick for inside & outside Walls, including cost of all materials, Water Charges, labour, lead, litf, etc, complete.

Plastering with CM. 1:3 mix 12 mm thick for ceiling,fol, bath, RCC Pillars, Sunshade, Loft, etc., including cost of materials, labour, Water Charges, lead, lift, Watering, curing, etc., complete.

Providing Weathering Course with good quality of readymade cooling tiles Laying over cm 1:3, and pointed with the same oiled mortor including cost of, cement all materials, curing, labour, lead and lift etc., Water Charges ,and including cost of material and labour for applying Water proof component over the terrace etc., complete.

Providing two coats of white cement based Wall putty over the plastered surface including removal of all loosly adhering materials from the Wall surface with the help of emery stone,putty blade or wire brush and making the surface in just Wet condition As per the Specification and approved by the Site Engineer including cost of all materials, labour, transport,lead etc complete.

Painting two coats with approved quantity White distember over a priming coat, for ceiling surfaces including cleaning the plastered surface, cost of all materials, labour, lead, lift, T&P, etc. Complete

Painting the inside Walls with two coats of interior emulison of approved colour over a primer coat of all materials, etc., complete.

Painting the outside Walls with two coats of ''ULTIMA" paint over a white cement primer coat of approved colour and quality including cost of all matreials, lead and lift etc., complete.

Colour washing two coats with colour pigment over a primary coat for ceiling, exposed surfaces of Wall, Beam, Slab, Sunshade, Lintel,Fencing Wall etc, including cost of all materials, lead, lift, etc., complete.

Supplying and Fixing of two side polished 20/30 mm Tk.Cuddapah Slab for Cupboard, ., including cost of all materials, labour, lead, lift, etc., complete

Providing Shoring and Shuttering in foundation using wooden planks and scantling including cost of all materials, lead,lifts, labour, etc , complete.

Dewatering Charges per hour including Hire Charges for 3/5 HP Diesel motor with Pump

Refilling with excavated Earth other than Sand in foundation and sides of masonry, consolidation As per std.specn.with Water including all, labour, lead , lift, etc., complete.

Removing the excess Earth to the nearby bund or low Laying area instructed by Field Engineer including all lead, lift, etc., complete.

Providing Inspection Chamber for sufficient intervels throughout the line 0.45x0.45 m. Size to a depth as below with proper gradient of the sewerline and BW. in CM 1:5 with CI. Cover at top and bottom foundation PCC 1:3:6 using 40 mm Metal plastering with CM1:3 12 mm thick and all lead, Water Charges ,lift etc.complete. 0.45x0.45 m size to a depth of 0.45 m

Supplying and Fixing CI.Man Hole Cover of size for inlet and outlet manhole and building outside Man Hole Cover for heavy duty including cost of all materials lead, lifts, labour etc., complete 0.45x0.45m CI Man Hole Cover

Supplying and Fixing CI.Man Hole Cover of size for inlet and outlet manhole and building outside Man Hole Cover for heavy duty including cost of all materials lead, lifts, labour etc., complete 0.60 x 0.60 m CI Man Hole Cover

Supplying and Laying PVC Pipe 110 mm outer dia 6Kg/ cm2 ISI make for, Weep Holes,Laying the Sewer line including cost of PVC Pipe coupling lbour for cutting Laying Fixing tighting etc including Earth work excavation and refilling trench etc complete

Supplying and Fixing of 110 mm dia slotted PVC Pipe for dispersion trench with Covering with roof pantiles for Covering the sides partly As per drawing including cost of all materials lead, lift etc. Complete.

Supplying and Filling 40 mm HBS Metal for dispersion trench per Standard Specification including cost of all materials, lead lift etc. complete.

Supplying and Fixing of 110 mm dia PVC Pipe wih cowl for ventilating shaft., to a height of 10' length with proper B.W. with C.M.1:5 mix plastering 12 mm thick including cost of all materials, lead, lift etc. Complete.

Finishing the floor with 20 mm thick cement Concrete using 3 to 10 mm stone chippings (Ellis pattern first sort -No Sand to be used) including cost of all materials, labour, lead, lift etc. complete.

Flooring with approved ceramic Non-slippery tiles 300x300 mm size of approved Quality, design & colour (Johnson or equivalent make)laid in cement mortar 1:3 -12 mm thick including pointing with same coloured cement using 0.4Kg/Sqm, finishing the joints, including cost of all materials, Water Charges ,labour, lead, lift, etc. complete

Flooring with approved Vitrified tiles 600x600 mm of approved Quality, design & colour (Johnson or equivalent make)laid in cement mortar 1:3 -12 mm thick including pointing with same coloured cement using 0.4Kg/Sq.m, finishing the joints, including cost of all materials, Water Charges,labour, lead, lift, etc. complete.

Dadooding Walls with approved quality of glazed tiles, size and design (johnson or equivalent make) laid in cement mortar 1:3 -10 mm thick including pointing with same coloured cement using 0.4Kg/Sq.m, finishing the jointSand pointing flush with the surface , including cost of all materials, Water Charges labour, lead, lift, etc. complete.

Flooring with approved acid proof tiles over cement mortor 1:3 20 mm thick in floor including pointing with white cement finishing the joints flush pointing the surface etc including cost of all materials, Water Charges labour, lead, lift, etc. complete. ( Battery Room )

M&F in position of Anodised Aluminium Fully Glazed Single Leaf Door using outer frame 101.60 x 44.45 x 2.10 mm @ 1.608Kg/M and Door inner frame side and vertical 53.70 x 44.45 x 2.30 mm @ 1.238 Kg/M, Door bottom section 83.50 x 44.45 x2.40 mm@ 1.679Kg/m and diveder and top of Door frame 47.62 x 44.45x 2.17 mm@ 1.072 Kg /M glazing clips of 17.30 x 19.0 x 0.60 mm @ 0.083 Kg/M, rubber beedings, hinges, handle, hydraulic floor spring, automatic Door closer etc, and with 12 mm Tk. one side laminated board at bottom half portion and top half portion with 5 mm thick sun cool glass including cost of all materials, lead, lift, etc, complete Single Leaf Door

M&F in position of Anodised Aluminium Partially Glazed Single Leaf Door using outer frame 101.60 x 44.45 x 2.10 mm @ 1.608Kg/M and Door inner frame side and vertical 53.70 x 44.45 x 2.30mm @ 1.238 Kg/M, Door bottom section 83.50 x 44.45 x2.40 mm@ 1.679 Kg/m and diveder and top of Door frame 47.62 x 44.45x 2.17 mm@ 1.072 Kg /M glazing clips of 17.30 x 19.0 x 0.60 mm @ 0.083 Kg/M, rubber beedings, hinges, handle, automatic Door closer etc, and with 12 mm Tk. one side laminated board at bottom half portion and top half portion with 5 mm thick sun cool glass including cost of all materials, lead, lift, etc, complete Single Leaf Door

M&F of Steel Door using 40x40x6 mm for outer frame 25x25x6 mm for shutter frame with msflat 25x6 mm 3 Nos for panels with 12 mm thick oneside laminated MDF duratuff exterior quality with bolts, bitumin washers, hinges locking etc., including cost of all materials.labour lead lifts etc complete. Steel Door of size 1.0 x 2.20 m (Double Leaf) As per drawing

Supplying and Fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are Reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with Wall thick of 2mm. The EPDM rubber (black colour) Covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should Not allow leakage of Water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and As per size for arresting Noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the Wall with 100% packing with screws and silicon packing all round the frames.The window should be got approved from the Executive Engineer before use on work cost of all materials , lead, lift , etc. complete, As per Standard Specification

Supplying and Fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 8mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with Wall thick of 2mm. The EPDM rubber (blackcolour) Covered with all over the edges of frame and shutter.The corners and joints should be welded and cleaned. Radiations pin headed or Pin headed/Fluted/Figured glass 4mm thick should be provided in the louvers. The window should be fixed to the Wall with 100% packing with screws and silicon packing all round the frames.The ventilator should be got approved from the Executive Engineer before use on work and As per Specications

Supplying and Fixing UPVC (Un-Plasticized Polyvinyl Chloride)Doors fabricated of casement type (open) from the profile the size of outer frame 60mm x 55mm and shutter with aouter Wall thickness of 2.40 mm .the Door unit should be designed with all corner joint mitred and fusion welded profile are Reinforcement with 25x24x25 mm Steel reniforced with thickness of 1 mm to have dimensionally stability. The sash should be of 60 x 102 mm. The mullion should be of 60 x 74 mm. The profiles should have co-extruded seals. Hardware: All the hardwarenlikenfriction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside.(Toilet and Bathroom.,etc)

Providing and Fixing Sanitary fitting consisting of Neycer/Parryware of oriya patten Water CloSet 45cm with P/S trap connecting with PVC ventilating shaft and Y bend complete, including cost of all material, labour, lead, lift, etc, complete. Europian Water Closet

Supply and Fixing of wash basin of size 560x410 mm coloured colour and of approved quality and make [Parryware or equivalent] with 12/15 mm dia brass CP pillar tap [Waterman], 32 mm PVC waste Pipe [KohiNoor], 12/15 mm CP angle cock [ISI], 15 mm brass nipple, 15 mm nylon connection [Kohinoor] etc. Fixing the basine in the wall with GI/Alu. brackets, giving necessary Water connection etc., and mirror with beveled edge fixed with suitable CP brass screws etc., complete.

Supplying and Fixing in position sun control polyester flim, reflective type 75 microns thick, gareware or equivalent including the cost of all materials, labour, lead, lift, T&P etc. Complete.

Supplying and sticking the Name Stickers in Doors identifying the Rooms including cost of material, labour etc. complete.

Supplying and Fixing of 1000 lit capacity sintex tank of approved quality including cost of materials labour for Fixing lead lifts etc., complete

Providing PVC down fall Pipe using 110 mm dia 4 Kg / Sqcm, PVC Pipe and PVC Clamp line supreme etc, including Fixing PVC washer type Door bend & shoe, in correct position and connecting from the roof Slab including cost of all materials, labour, transport lead, lift, etc., complete, including PVC accessories and washers.

Supplying and Fixing of digital wall clock 1 No, floor coir mat 2000x600 mm for Entrance 1000x500 mm - 2 No.,towel rod, floor trap, soap tray for office of approved make and quality including the cost of all materials, leads, lifts etc., complete

Supply and Fixing of 50 Sq.mm GI Chain link Fencing of 10 gauge with Standard width of 1.80 m height including cost of all material, labour for Fixing, transportion, lead, lift, etc., complete.

Supplying ,Fabrication and Fixing in position GI/MS angle 75x75X6 mm for corner and intermediate and Supply of MS flat 65X10 mm (angle both side )& GI bolt & nut including cost of all materials, transporting, labour Charges, welding Charges, cutting Charges, drilling holes with provision of GI 175x16mm size bolt, nut and washers of required sizes for holding chain link Fencing, 1 coat of primer of approved quality and colour, enamel painting with two coats, all leads and lifts etc., complete and placing in position As per the Specification and drawings and as directed by Site Engineer.

Supply and Spreading of Quarry Dust inside the yard As per Std.Spec.including cost of materials ,labour lead,lift etc

Supply and apreading of 20 mm of HB stone inside the yard As per Std.Spec.including cost of materials ,labour lead,lift etc

Providing and Laying PVC high density Pipe including cost of all materials viz.bend, labour for cutting tHreading Fixing and tightening necessary excavation etc., complete. 32 mm dia

Providing and Laying PVC high density Pipe including cost of all materials viz.bend, labour for cutting tHreading Fixing and tightening necessary excavation etc., complete.25 mm dia

Providing and Laying PVC high density Pipe including cost of all materials viz.bend, labour for cutting tHreading Fixing and tightening necessary excavation etc., complete. 20 mm dia.

Supplying and Fixing inposition of GM gate valve best quality such as leader, Zeolite, Zenith including cost of all special fixtures lead, lift,etc., complete.32 mm dia GM Gate valve

Supplying and Fixing inposition of GM gate valve best quality such as leader, Zeolite, Zenith including cost of all special fixtures lead, lift,etc., complete. 25 mm dia GM Gate valve

Supplying and Fixing inposition of GM gate valve best quality such as leader, Zeolite, Zenith including cost of all special fixtures lead, lift,etc., complete. 20 mm dia GM Gate valve

Providing PVC Door bend 50 mm dia including Fixing in position cost of all materials, labour, lead, lift, etc., complete.

Supplying and Fixing 100 x 50 mm PVC floor trap in Bath Room with one PVC Door bend shoe of 50 mm.dia including cost of all etc., complete

Supplying and Fixing 110 mm dia PVC Bend including cost of materials, labour lead lift, etc. Complete

Supplying and Fixing 110 mm dia PVC TEE including cost of materials, labour lead lift, etc. Complete

Wiring with 2x1.5 Sq.mm PVC insulated Mutlistrand unsheathed copper conductor Cable 1100 v Grade in suitable PVC rigd Pipe on wall and ceiling with reputed make switch boxes Earthwire connection in 14 SWG TC wire for light point / Fan point including cost of wire ,labour lead etc. complete.of approved quality (For Electronic regulator)

Supply and run of 2 x 1.5 Sq.mm (22/0.3) PVC insulated Multi strand unsheathed copper conductor of 1100V Grade in rigid Pipe concealed in wall and ceiling with continous Earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour

Wiring with 2x1.5 sq.mm (22/0.3) PVC insulated Multi strand unsheathed Cu.conductor of 1100 V Grade in suitable PVC rigid Pipe concealed in wall and ceiling with PVC accessories in in flush with wall, with 150 mm x 100 mm x 113 mm TW switch box with 3 mm thick hylum sheet cover for 5 A 3 Pin Non interlocking CS plug with continuous Earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC Plug Point.

Wiring with 2 x 2.5 Sq.mm (56x0.3) PVC insulated Multi strand unsheathed copper Cable 1100 v Grade in suitable PVC rigd Pipe concealed in wall and ceiling with PVC accessories in flush with wall with 150x100x113 mm TW Swich box with 3 mm thick hylem sheet for 15 A 3 PIN Non interlocking CS plug with continuous Earth wire 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed Power Plug Point

Supply and Fixing of 3 phase 4 wire 4 way ICDB of 16A per way with 32 A TPN MC switch with suitable MS Cable entry boxes trunking box and internal connections on suitable angle iron frame work etc. Complete with PWD Earthing

Supply and Fixing of 20 W LED 3000 K flu.type fitting complete on wall/ceiling with tubes and PVC unsheathed Copper leads from terminal to the fitting.

Supply and Fixing of 4'40 W Twin type Mirror optic suspension type fitting (Philips /Crompton / Wipro) complete with louvers cover complete with copper chokes and condensor with conduit Pipe suspension, with PVC unsheathed copper leads from the terminals to the fittings with flu. tubes.

Supply and Fixing of W.T bulk head fitting (Philips / Bajaj / K.Lite / Crompton Greaves) suitable for 9 W LED bulb with guard

Supply and Fixing of fancy glass shade and 40 W LED bulb for BH point.

Supply and Fixing of 1400 mm (56") AC ceiling fan complete with stepped electronic 300 W regulator with 1.0m down rod including fan Clamp with side plates and cross arm of size 450 mm.

Supply and Fixing of 450 mm (18") sweep (heavy duty) AC exhaust fan complete with necessary wall opening and making good of the wall.

Supply and Fixing of RCCB safe trip of appd LEGRAND ,ISI make 25 amps with suitable box including cost of all materials labour,lead, lift, etc complete As per Std., Specification.

Supply and Fixing of Horizontal type 4 way pole neutral MCB distribution board in sheet Steel enclosure with 40A 4 pole MCB isolater as incoming and 12 Nos. 6 A to 32 A SP MCB as outgoing in flush with wall and making good of the concealed portion with Earth connection.The MCBDB and MCB's should be with ISI mark)

Earthing As per PWD Standard with an Earth electrode of 2 Mtr. Class 'B' GI Pipe of dia not less than 32 mm complete with necessary masonry work.

Supplying and Laying of 4 core 6 Sq.mm copper PVC armoured LTUG Cable including cost of Cable, lead, lift, labour charge, etc., complete

Supplying and Fixing of 4 pole 32 Amps Isolator with MCB box 4 pole including terminal block for testing purpose at relay and CC Room, cost of all materials, lead, lift, labour charge, etc., complete.

Drilling of 150 mm dia Bore Well from GL in all Classification of soils including hard rocks using Power RIG/Hamer RIG, Charges for transporting the Power Rig to site , operation Charges all lead, lifts , labour, etc, complete.

Supplying and Fixing 165 mm dia PVC casing Pipe of superior quality of 6 Kg / Sq.cm with sheel thickness of 8 mm, including Fixing and transporting to the site and cost of PVC casing Pipe, labour, lead, lifts, etc, complete..

Supplying and Fixing 165 mm dia PVC slotted Pipe of superior quality of 6 Kg / Sq.cm with sheel thickness of 8 mm, including Fixing and transporting to the site and cost of PVC slotted Pipe, labour, lead, lifts, cost of pebbles and backing of pebbles As per instruction of Site Engineer etc, complete..

Supplying and Fixing of 50 mm dia outer HDPE Hose fine tee, flow tee of ISI make with connecting sepcieals for suction including cost of all materials ,labour, lead, lifts, etc, complete.

Supplying and Fixing of 25 mm dia outer HDPE Hose fine tee, flow tee of ISI make with connecting specials for suction including cost of all materials ,labour, lead, lifts, etc, complete.

Supplying and Run of 1.5 mm 3 core flat Cable As per Specification including cost of all materials , labour lead and lift etc. complete.

Supplying and Fixing and erection of 50 mm dia GI Pipe 'B' Class in suction and delivery Pipe from the Bore including cost of Pipe coupling,bend, labour for cutting , threading & Fixing wherever necessary.

Provision of conducting Geological survey for Bore Well by the Government agencies. including transport,labour etc complete

S&F of 3 phase 2HP Submersiable pump with accessories of approved make of Texmo or ELG Iincluding cost of all materials,labour transport,l ead,lift etc with mounting platform & foot valve arrangement and 3 phase 15 amphs L& T starter arragements etc complete

Supplying and Fixing of 15 mm high quality brass screw down bib cock such as leader, Zeolite and Zenith of any other approved quality cost of all materials, labour, lead, lift, etc., complete.

Providing Water mixed macadam 1:1 proportion using Quarry Dust and 40 mm Metal mixed with Machine adding required Water for Road and bell mouth including cost of all materials ,labour,Well consolidation with Power Roller lead,lift,etc complete

Providing Expansion joint for Road concrete As per Specification in both direction using prevalid aspheltics pad 20 mm thick to full width and depth of 150 mm thick plastering with CM 1:3, 20 mm thick including cost of Cement, all materials, labour, curing, all leads, and lifts, etc., complete. As per Standard Specification.

Supplying and Fixing in position of MS grill gate including cost of all materials lead, lift, etc. As per type design drawing with proper locking arrangements as directed by the engineer at site including cost of painting with two coats of Enamel paint over with one coat of red oxide.

Painting and writing the name of substation in the wing wall both in English & Tamil with artist painter including cost of all material, labour for Fixing, transportion, lead, lift, etc., complete.

Providing Grout Pocket Holes includig cost of all labour Charges, lead and lift etc., complete.

Supplying and Fixing of PVC end cap of 20 mm size of approved quality cost of all materials, labour for Laying and making holes, lead, lift, etc., complete for Water supply arrangements to Earth pit.

Supply of Furnitures manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead and lift etc., complete. S Type chair with Nylon seated

Supply of Furnitures manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead and lift etc., complete., Steel side Rack open type

Supply of Furnitures manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead and lift etc., complete Steel Half Bench

Supply of Furnitures manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead and lift etc., complete Steel stool

Supply of Furnitures manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead and lift etc., complete., SC table

Supply of Furnitures any other ISI mark including cost of all materials, labour, lead and lift etc., complete PVC armed Chair of reputed make

Engraving in Black Granite polished Stone of Standard Specification the Name of Sub Station in Standard Alphabets in Tamil and English including supply,transport,Fixing of granite stone, labour,lead etc complete

A.2 Labour, machinery, Consumables for the Fabrication for steel structures.with electricity supplied by Department at free of cost for Heavy section (14 kg/m and above) (40% labour for hill area extra)

Labour, machinery, Consumables for the Fabrication for steel structures.with electricity supplied by Department at free of cost. Light section (below 14 kg/m) (40% labour for hill area extra)

Labour for the Erection of the Fabricated Steel Structures with electricity supplied by Department at free of cost. Heavy section (14 kg/m and above) (40% labour for hill area extra)

Labour for the Erection of the Fabricated Steel Structures with electricity supplied by Department at free of cost. Light section (below 14 kg/m) (40% labour for hill area extra)

Labour charges for hot dip galvanising of mild steel materials including transport, lead, lift, etc., complete wherever required as directed by the field engineer. 5. (40% labour for hill area extra)

Labour, machinery, consumables for fabrication, erection of earrthmat, earth connection, earth electrode, earthspike (including sharpening of earth spike, earth work excavating and refilling for earth mat erection). As directed by the field engineer. 3 (40% labour for hill area extra)

Providing Earth bore 140/150 mm dia using power rig or 100/125 mm dia using hand bore set including the labour, lead, lift etc., sedimentary strata of clay & sand stone shale pebbles boulders etc., for earth Pits with supply and providing of Bentonite powder(Sodium Bentonite) 5Kg /Mtr depth of the bore mixed with low resistivity earths as directed by the field Engineer. (Earth to be supplied by the contractor) (40% labour for hill area extra)

Labour charges for providing /placing grouting bolt by template for 110KV breaker, C.T/PT structure, 33 KV Breaker foundation as directed by the field engineer. (40% labour for hill area extra)

Supply of Red oxide & Aluminium paint of reputed make (ie Asian,Dulux,Nerolec paint) and Labour,consumables for first primer coat using red oxide Paint and first finish coat of Painting using Aluminium Paint including consumables, after proper surface preparation using appropriate machinery to remove rust/scales etc as directed by the field engineer. (40% labour for hill area extra)

Supply of Aluminium paint of reputed make (ie Asian,Dulux,Nerolec paint) and Labour for Second coat of Painting using Aluminium paint including consumables etc., (40% labour for hill area extra)

Supply & Labour charges for two coats of enamel painting in any substation structures, steels, etc and wherever required including the cost of reputed make paints and other consumables as directed by the field engineer. (40% labour for hill area extra)

Labour charges for writing details in any finished surface/board including cost of enamel paints and other consumables as directed by the field engineer. (40% labour for hill area extra)

Labour for erection of 33 KV Breaker using crane arranged by the Contractor including the cost of gada cloth taflan tape and other consumables including support structure providing holes, gas filling wherever necessary as directed by the field engineer. (40% labour for hill area extra)

Labour for erection of 110 KV Breaker using crane arranged by the Contractor including the cost of gada cloth taflan tape and other consumables including support structure providing holes, gas filling wherever necessary as directed by the field engineer. (40% labour for hill area extra)

Labour for erection of 33 KV CT's, 22 kV PT's using Crane arranged by the Contractor including providing holes wherever required as directed by the field engineer. (40% labour for hill area extra)

Labour for erection of 110 KV Current transformers/Potential transformers using Crane arranged by the Contractor including providing holes wherever required as directed by the field engineer. (40% labour for hill area extra)

Labour for erection of 110 KV AB Switch (without earth) with proper allingments, with erection of insulators, including accessories, Meggering and cost of consumables and lubricants and as directed by the field engineer. with electricity supplied by Department at free of cost. (40% labour for hill area extra)

Labour for erection of 110 KV AB Switch (with earth)with proper allingments, with erection of insulators, including accessories, Meggering and cost of consumables and lubricants and as directed by the field engineer. with electricity supplied by Department at free of cost. (40% labour for hill area extra)

Labour for erection of 33 KV AB Switches with proper allingments including accessories, Meggering and cost of consumables and lubricants and as directed by the field engineer. with electricity supplied by Department at free of cost. (40% labour for hill area extra)

Labour for erection of 110 KV LAS station/Distribution type single unit including monitors & accessories. (40% labour for hill area extra)

Labour for erection of 22 KV LAS station/Distribution type single unit including monitors & accessories. (40% labour for hill area extra)

Labour for the Erection of 110 KV Single Conductor Strung bus/phase and all related hardwares, fittings, clamps including Meggering, hoisting of insulators, and consumables and as directed by the field engineer. with electricity supplied by Department at free of cost. (40% labour for hill area extra)

Labour for the Erection of 33 KV Single conductor Strung bus/phase and all related hardwares, fittings, clamps including Meggering, hoisting of insulators, and consumables and as directed by the field engineer. with electricity supplied by Department at free of cost. (40% labour for hill area extra)

Labour for the erection of 110 KV Insulator single pole stack for supports Uprights/Underhang including Meggering & other consumables and as directed by the field engineer. (40% labour for hill area extra)

Labour for the erection of 22 KV Insulator single pole stack for supports including Meggering & other consumables and as directed by the field engineer. (40% labour for hill area extra)

Labour for the erection of 75 mm (1 Length) Busbar including suitable Modifications of End Clamps, providing holes wherever necessary as directed by the field engineer. with electricity supplied by Department at free of cost. (40% labour for hill area extra)

Labour for the erection of 50 mm (1Length)Busbar including suitable Modifications of End Clamps, providing holes wherever necessary as directed by the field engineer. with electricity supplied by Department at free of cost. (40% labour for hill area extra)

Labour for the Erection of Jumper/ Droppers using Zebra Conductors including Modification of End clamps, providing holes etc wherever necessary as directed by the field engineer. (40% labour for hill area extra)

Labour for Erection of Battery set including modification of wooden stand,cost of additional wood ,two coats of painting of Acid proof paint on wooden stand and neatly stacking the Battery cells, fixing of connecting plates. (40% labour for hill area extra)

Labour,Consumables for the Initial filling and First Charging of the Battery to the required AH input and thereafter atleast 3 cycles of Charge / Discharge of the Battery set till the battery is charged to its full Capacity including the cost of Discharge Coil/Heaters , cost of make up acid and distilled water, white petroleum jelly etc., as directed by the field Engineer. (40% labour for hill area extra)

Labour for the Erection of Control Panels like Simplex type/AC/DC/C&R Panel, Battery Chargers with change over switch of Non-Grid type, Twin feeder Control/Relay Panels etc., including consumables as directed by the field engineer. (40% labour for hill area extra)

Labour for erection of above 8 core cable in duct/trench/clamping on structures - neat laying in the ducts with identification Tags,Plastic token in all duct corners for easy identification of cables. including fabrication of clamps and fixing at uniform intervals as directed by the field engineer. (40% labour for hill area extra)

Labour for erection of upto 8 core cable in duct/trench/clamping on structures - neat laying in the ducts with identification Tags,Plastic token in all duct corners for easy identification of cables. including fabrication of clamps and fixing at uniform intervals as directed by the field engineer. (40% labour for hill area extra)

Labour charges for laying of control/ yardlight cable by digging cable trench of size 0.3mX0.6m filling with for a depth of 0.2m, covering with one layer of country bricks and refilling with excavated earth and including cost of sand and bricks,etc. (40% labour for hill area extra)

Supply and glanding of ISI mark cable gland of 16/19 mm size of reputed make including removing of insulation of cables and providing suitable holes as required and as directed by the field engineer.

Supply and glanding of ISI mark cable gland of 22/25 mm size of reputed make including removing of insulation of cables and providing suitable holes as required and as directed by the field engineer.

Supply and glanding of ISI mark cable gland of 28/32 mm size of reputed make including removing of insulation of cables and providing suitable holes as required and as directed by the field engineer.

Supply and termination of cable core end dressed neatly including the cost of cable socket (lug) ferrules, sleeves, tags, ties, stropes, etc., as directed by the field engineer. (No.of core ends in unit of 1000).

Supply and Erection of 5m Grouting type lamp post of B class MS pipe (3 inch dia for 3mtrs & 2.5inch dia for 2mtrs)including single/double fitting fixing arrangements,1 inch dia B class pipe arms,yard light box fixing flat and one coat of redoxide and Two coat of Aluminium paint.

Supply and Erection of yard light fuse unit mounting box of size 200x200x150mm (BxHxD) out of 18 SWG (1.22mm) G.I Sheet as per drawing , provided with 16/20A rewirable Porcelain Fuse carrier unit, 16 A Bakelite connenectors including its cost materials, consumables, VAT, frieght, etc and as directed by the fiels engineer on site requirements. (The box shall be vermin proof,shall be provided with sturdy hinges,with provision for cable entry and locking arangements).

Fabrication, supply and fixing of C.T/P.T junction box of size 400x300x150 mm of 16 SWG(1.6mm) M.S.sheet with primer coat paint, Supply,Fabrication and erection of Box fixing Flats using 50x8 MSF, Supply and Fixing of 25x3mm² Braided Flexible Copper loops to box earth., Two coat of Enamel Paint, provision for fixing terminal blocks/MCBs including consumables, VAT, fright, etc., as directed by the field engineer on site requirements.(The box shall be vermin proof shall have sturdy hinges, & locking arrangements)

Fabrication, supply and fixing of AC junction box of size 535x310x127mm of 18 SWG M.S Sheet including HRC Fuse unit-18nos should be fitted with base, consumables, VAT, fright, etc., asTRANSCO standard and directed by the field engineer on site requirements.(The box shall be vermin proof shall have sturdy hinges, & locking arrangements)

Fabrication,supply&fixing of Earthpit detail board including the cost of 20SWG CR Sheet,10mm RTS Rod ,T &P etc., complete.

Supply and Erection of 1x72W or 2x36W, 240V LED street light Aluminum case fitting ISI- Make as per direction of site engineer.(inclusive of all taxes).

Supply and fixing of godrej 6 lever navtol lock with triplicate keys for A.B.Switches & LAS fencing and for any other purpose including the cost of ring and key token as directed by the field engineer.

Supply and fixing of Key chain,ring and identification key token for A.B.Switches as directed by the field engineer.

Supply and erection of Vinyl Sticker cutting/Printing on Vinyl Sticker/Foam board to be used for main equipment, slogan, name board & any other purpose of required sizes as directed by the field engineer.

Supply and fabrication of sand drums, (size of 580mm dia & 420 mm height)with conical cover made of G.I sheet to be provided with handle including the cost of barrel,G.I sheet ,sand,paint and other consumables as directed by the field engineer.

Supply and labour charges for providing GI chain link fencing wire of size 50mmX50mm square of 10 swg. 83

Supply and fabrication and erection of grout bolt with 20/22 mm rod confirming to IS with proper threading and 2 nos MS Nuts as directed by the field Engineer.

Supply and fabrication and erection of eye bolts with 20/22 mm rod confirming to IS with proper threading and 2 nos MS Nuts as directed by the field Engineer.

Supply of 50 mm Dia, "B" class G.I.pipe for extension of tandem/down pipe for A.B.Switches and for any other work required as directed by the field engineer.

Supply and provision of 12/25x3mm flexible braided copper / copper flats as required and as directed by the field engineer.

Supply & Crimping of Lugs of Suitable sizes as required for PT/CT Jumpers, etc as directed by the field engineer.

Fabrication, supply and fixing of Station Transfomer Distribution box of size 900x650x250mm of 18 SWG M.S Sheet including Porcelin Fuse unit-(200A-3nos,100A-6nos), consumables, VAT, fright, etc., as TRANSCO standard directed by the field engineer on site requirements.(The box shall be vermin proof shall have sturdy hinges, & locking arrangements). 46

Supply and Labour charges for fixing of 20 SWG CR Sheet(size of board 8' x 4') in Equipment Details board/Fire Stand roof including the cost of CR Sheet ,Red oxide Paint etc.,complete. 48

Supply & fixing of LC/Key board out of 75x 25 mm Alu. frame embedded with 12 mm pre-laminated wood particle board using screw on rear side, 2 Nos plain glass sliding shutter of 5 mm thick fixed with metal roller on Alu.channel with locking arrangements, glass piece handle shutters, wall clamp as directed by the field Engineer including cost of all materials & all consumables. 53

Typing & printing of Commisioning reports, Booklets.,etc.

Charges for Spiral Binding.

Xerox copy of Commisioning reports, Booklets, Drawings.etc.,

Supply and provision of M8,M10,M12 and M16 (full /Half thread)G.I.bolt and nuts of various sizes including plate/spring washers as required and as directed by the field engineer.

Supplying, laying, fixing and pluging with holed end cap in position of PVC pipe of best quality including cutting RCC/Brick work cable duct wherever necessary, cutting PVC pipe, threading, joining with necessary PVC specials, sealing by plaster of paris at Both ends including cost of all materials lead lift labour, earthwork excavation wherever necessary (100mm PVC pipe)

Supply and Erection of GI Ladder type Cable tray 2.5 m L thickness 2mm with coupling plate and bolt nuts as directed by the field engineer. (600mm)

Supply and Erection of GI Ladder type Cable tray 2.5 m L thickness 2mm with coupling plate and bolt nuts as directed by the field engineer. (450 mm)

Supply of earth discharge rod made of PVC with copper flats & 6 sq.mm copper cable as directed by the field engineer.

Supply of Aluminium Ladder adjustable type 8mtr to 12mtr as directed by the field engineer.

Supply of first Aid kit as directed by the field engineer.

Supply of Aluminium Power Connectors/Clamps/Fittings with SS Bolts and Nuts, frieght ,including modification if any etc., confirming to IS confirming to IS as per the drawing and specification.Tension Fitting for Zebra 6 Bolted Type

Supply of Aluminium Power Connectors/Clamps/Fittings with SS Bolts and Nuts, frieght ,including modification if any etc., confirming to IS confirming to IS as per the drawing and specification.Tension Fitting for Zebra 4 Bolted Type

Supply of Aluminium Power Connectors/Clamps/Fittings with SS Bolts and Nuts, frieght ,including modification if any etc., confirming to IS confirming to IS as per the drawing and specification.Switch End Clamp for Zebra

Supply of Aluminium Power Connectors/Clamps/Fittings with SS Bolts and Nuts, frieght ,including modification if any etc., confirming to IS confirming to IS as per the drawing and specification.Switch End Clamp for Mink

Supply of Aluminium Power Connectors/Clamps/Fittings with SS Bolts and Nuts, frieght ,including modification if any etc., confirming to IS confirming to IS as per the drawing and specification.Switch End Clamp for 75mm Bus

Supply of Aluminium Power Connectors/Clamps/Fittings with SS Bolts and Nuts, frieght ,including modification if any etc., confirming to IS confirming to IS as per the drawing and specification.Switch End Clamp for 50mm Bus

Supply of Aluminium Power Connectors/Clamps/Fittings with SS Bolts and Nuts, frieght ,including modification if any etc., confirming to IS confirming to IS as per the drawing and specification.T clamp for Zebra to Zebra

Supply of Aluminium Power Connectors/Clamps/Fittings with SS Bolts and Nuts, frieght ,including modification if any etc., confirming to IS confirming to IS as per the drawing and specification.T Clamp for 75mm Bus to Zebra

Supply of Aluminium Power Connectors/Clamps/Fittings with SS Bolts and Nuts, frieght ,including modification if any etc., confirming to IS confirming to IS as per the drawing and specification.T Clamp for 50mm Bus to Zebra

Supply of Aluminium Power Connectors/Clamps/Fittings with SS Bolts and Nuts, frieght ,including modification if any etc., confirming to IS confirming to IS as per the drawing and specification.Free End clamp 75mm

Supply of Aluminium Power Connectors/Clamps/Fittings with SS Bolts and Nuts, frieght ,including modification if any etc., confirming to IS confirming to IS as per the drawing and specification.Free End Clamp 50mm

Supply of Aluminium Power Connectors/Clamps/Fittings with SS Bolts and Nuts, frieght ,including modification if any etc., confirming to IS confirming to IS as per the drawing and specification.PG Clamp for Zebra

Supply of Aluminium Power Connectors/Clamps/Fittings with SS Bolts and Nuts, frieght ,including modification if any etc., confirming to IS confirming to IS as per the drawing and specification.75mm Corona Bell

Supply of Aluminium Power Connectors/Clamps/Fittings with SS Bolts and Nuts, frieght ,including modification if any etc., confirming to IS confirming to IS as per the drawing and specification.50mm Corona Bell

Supply of Aluminium Power Connectors/Clamps/Fittings with SS Bolts and Nuts, frieght ,including modification if any etc., confirming to IS confirming to IS as per the drawing and specification.Reducer clamp for 75mm bus to zebra

Supply of Fire extinguisher foam type trolley mounted 9 Ltr capacity as directed by field engineer

Supply of Fire extinguisher DCP type trolley mounted 25 KG capacity as directed by field engineer

Supply of Fire extinguisher DCP type trolley mounted 10 KG capacity as Directed by field engineer

Supply of Fire Extinguisher Foam type 50 ltrs capacity as Directed by the field engineer

Supply of Fire extinguisher DCP type portable 6Kg capacity as directed by the field engineer

Supply of Fire Bucket 10Lit capacity as directed by the field engineer

Labour for the loading/unloading/shifting of Department materials at stores or site by the Contractor WITHOUT using Board's crane for one operation. 110kV Isolators

Labour for the loading/unloading/shifting of Department materials at stores or site by the Contractor WITHOUT using Board's crane for one operation. 22/33 kV Isolators

Labour for the loading/unloading/shifting of Department materials at stores or site by the Contractor WITHOUT using Board's crane for one operation. Cables/Conductors including cutting and rewinding

Labour for the loading/unloading/shifting of Department materials at stores or site by the Contractor WITHOUT using Board's crane for one operation. Busbars

Labour for the loading/unloading/shifting of Department materials at stores or site by the Contractor WITHOUT using Board's crane for one operation. 110kV Breaker

Labour for the loading/unloading/shifting of Department materials at stores or site by the Contractor WITHOUT using Board's crane for one operation. 11/22/33kV Breaker

Labour for the loading/unloading/shifting of Department materials at stores or site by the Contractor WITHOUT using Board's crane for one operation. 110kV CT/PT/LAS

Labour for the loading/unloading/shifting of Department materials at stores or site by the Contractor WITHOUT using Board's crane for one operation. 33/22/11 KV CT/PT/LAS/DT/Others

Labour for the loading/unloading/shifting of Department materials at stores or site by the Contractor WITHOUT using Board's crane for one operation. 110VDC battery sets

Labour for the loading/unloading/shifting of Department materials at stores or site by the Contractor WITHOUT using Board's crane for one operation. 110kv Solid core insulators

Labour for the loading/unloading/shifting of Department materials at stores or site by the Contractor WITHOUT using Board's crane for one operation. 33/22/11 kV Insulators

Labour for the loading/unloading/shifting of Department materials at stores or site by the Contractor WITHOUT using Board's crane for one operation. AC/DC/C&R Panels of Non grid type, Single feeder Control/Relay Panels of Grid type

Labour for the security arrangement for switchyard in substations under erection after 3months from the date of site taken over by the contractor to till the date of commissioing /taken over by the O&M wing.(3shift/day)

Labour for erection of C.T/P.T junction box.(box supplied by department)

Supply and fixing of AC 3 phase 4 pole 415V ISI mark changeover switch of reputed make iron glad metal switch as required and as directed by the field engineer. 100A

Supply of Exide make Elmaster inverter 12V 150Ah battery with 48month warranty for UPS for Control room emergency lighting as directed by the field engineer

Supply of 2.5 kV 5000 Mohm CIE make Hand operated insulation tester as directed by the field engineer

Supply of Digital Multimeter Make: MECO as directed by the field engineer

Supply of Rechargable Emergency torch light as directed by the field engineer

Supply of Tools Kit (spanner set size upto 32mm make:Taparia) as directed by the field engineer

Supply of BELT ROPE WHITE COTTON 16MM as directed by the field engineer

Supply of hand Rubber gloves as directed by the field engineer

Supply of steel items 40mm M.S.Round rod as per TNEB specification including cost of materials, loading, transporting, unloading and delivery at site,complete.

Supply of steel items complete 50 x 8mm M.S.Flat as per TNEB specification including cost of materials, loading, transporting, unloading and delivery at site.

Supply of steel items complete 65x10mm M.S.Flat as per TNEB specification including cost of materials, loading, transporting, unloading and delivery at site.

Supply of steel items 200 X100 mm R S Joists as per TNEB specification including cost of materials, loading, transporting, unloading and delivery at site,complete.

Supply of steel items complete 50 x 50 x 6mm M.S.Angle as per TNEB specification including cost of materials, loading, transporting, unloading and delivery at site.

Supply of steel items complete 65 x 65 x 6mm M.S.Angle as per TNEB specification including cost of materials, loading, transporting, unloading and delivery at site.

Supply of steel items complete 125 x 65 mm M.S.Channel as per TNEB specification including cost of materials, loading, transporting, unloading and delivery at site.

Supply of steel items complete100 x 50 mm M.S.Channel as per TNEB specification including cost of materials, loading, transporting, unloading and delivery at site.

Supply of steel items complete 6 mm chequered plate as per TNEB specification including cost of materials, loading, transporting, unloading and delivery at site.

SGST to be quoted in Percentage (value alone) Ex. 9%, it should be entered as 9 only

CGST to be quoted in Percentage (value alone) Ex. 9%, it should be entered as 9 only

Inter-state GST @18% for other than Tamil Nadu supplier. If the contractor is within Tamil Nadu may be quoted as "0" only

Please Enable Macros to View BoQ information