Estimate for concrete lining of 1L Disty from RD 49816-61500 off-taking from RD 158230/L of BML and its allied works.

Ordinary jungle clearance of both banks of running Disty. Minors and Drains includind boundary road with discharge upto 1.5 cumecs.

Excavation of soil (any type) using hydraulic excavator and CK 90 excavation with hydraulic excavator of 0.9 cum capacity including cutting trimming bottom and side slopes in accordance with requirement of grades and cross sections, includingall lift and combined lead upto 30 mtr.

Excavation of soil using hydraulic exavator and hydraulic tractor trolly including cutting and loading in trolly and transporting to the embankments locations with all lifts and leads (excluding royality.)

Compaction of earth Extra for laying earth/fly ash as per specificaion in 20cm layers and dressing including cost of rolling Extra for watering the earth / fly ash laid in 20 cm layers as per specificaion for compation Extra for Rolling to Specificaions

Dressing of Earthwork (New work or remodeling work.)

Earthwork for lip cutting for irrigation of channel inclusive of all allowances leads and dressing 0 to 1.5 mtr depth

Earthwork excavation in foundations trenches extra in all kinds of soil where pick jumper work is not involved and not exceeding 2.0 meters depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 meters.

Dressing of Side Slopes and prepration of sub grade for lining complete in all respect as per pwd specification.

Dag Belling single kassi stroke complete in all respect

Putting 1:3 (cement: water) cement slurry with cement @ 2.25 kg/ sqm on prepared bed and side slopes before laying concrete on bed and side slopes

Cement concrete lining 75mm. thick or less laid manually for irrigation channels, using cement concrete M- 15 with cement content 325 kg/cum mixed in an automatic computerized Batching & Mixing Plant and transported to the site in transit mixers with an average lead of 1 Km(FOR TRAPEZOIDAL SECTION AND CUP SECTION OF ALL RADII) (For Side Slopes)

Cement concrete lining 75mm. thick or less laid manually for irrigation channels, using cement concrete M- 15 with cement content 325 kg/cum mixed in an automatic computerized Batching & Mixing Plant and transported to the site in transit mixers with an average lead of 1 Km(FOR TRAPEZOIDAL SECTION AND CUP SECTION OF ALL RADII) (For Coping)

Cement concrete lining 75mm. thick or less laid manually for irrigation channels, using cement concrete M- 15 with cement content 325 kg/cum mixed in an automatic computerized Batching & Mixing Plant and transported to the site in transit mixers with an average lead of 1 Km(FOR TRAPEZOIDAL SECTION AND CUP SECTION OF ALL RADII) (For Sleepers)

Shuttering for faces of Concrete lining on side slopes and bed complete in all respect as per design/drawing and PWD specifications.

Filling Contraction Joint with sealing compound complete in all respect

Filling expansion joints with special impervious hot pour 12.5 mm wide

Extra bitumen painting at 0.69 per sqm (on sleeper) . Applying Bitumen Primer coat on side of lining and top of sleeper for construction joint, Expansion Joint & Contraction Joint. Complete in all respect.

Providing & laying 250 mm wide LDPE Film 150 micron over sleepers

Earth work in excavation of foundation of structures as per drawing and technical specification,including setting out, construction of shoring and bracing, removal of stumps and other matter, dressing of sides and bottom and backfilling with excavated surplus soil Depth 0-3 mtr

Supplying, fitting and placing HYSD bar reinforcement in sub- structure complete as per drawing and Technical Specifications.

Plain/Reinforced cement concrete grade M20 in sub-structure with batching Plant, Transit Mixer and Concrete Pump complete as per drawing and technical specifications with Height up to 5m.

Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days. CCM 10

Supplying and lying dry brick ballast.

Earth work involved in dismantling Open flume, A.P.M. or O.S.M. type Outlets (including excavation, refilling, consolidation and dressing )

Adjusting check plates of open flume outlet to correct ‘B‘ and fixing at site flush with the gullet walls :- In case of new outlets where no dismantling and reconstructing of gullet walls is involved.

Adjusting new APM Block in correct "y" & fixing in position (in case of new outlet where no dismentling and reconstructing of gollet wall is involved

Laying cement concrete 1:4:8 with gauge 40mm mixing by mechanical means using concrete mixer volumetric type.

First class burnt brick work laid in cement sand mortar 1:4 in foundations & plinth

Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth.

Cold twisted detormed (Ribbed/ ToR Steel Bar) Bars (Fe 500 grade as per IS 1786-2005) , for R.C.C works, where not including in the complete rate of RCC including bending and biding placing in position complete

Centering and shuttering for faces of walls, partitions, retaining walls and the like (vertical or battering including attached pilasters buttresses etc.

Dismantling brick work tile, masonry or tile lining in cement.

Dismantling Reinforced Cement Concrete.

Dismantling Cement Concrete 1:4:8.

Excavation of Soil using Hyraulic Excavator and hydraulic Tractor Trolly I/C cutting and loading in Trolly and transporting to the embankment locations with all lifts and leads. Disposal/carraige from 0 upto 450m

Rehandling of Earth work.

Preparing watering and ramming surface for laying concrete, for irrigation channels horizontally.

Plain cement concrete in sub-structure complete as per drawing and Technical Specifications. For PCC M-15 Grade. Using Batching Plant, Transit Mixer and Concrete Pump, i/c shuttering and vibrating etc but excluding steel reinforcement complete in all respect.

Reinforced cement concrete in sub-structure complete as per drawing and Technical Specifications for RCC M-30 grade, Using Batching Plant, Transit Mixer and Concrete Pump, i/c shuttering and vibrating etc but excluding steel reinforcement complete in all respect.

Reinforced cement concrete in sub-structure complete as per drawing and Technical Specifications for RCC M-25 grade, Using Batching Plant, Transit Mixer and Concrete Pump, i/c shuttering and vibrating etc but excluding steel reinforcement complete in all respect.

Furnishing and Placing Reinforced cement concrete in super- structure as per drawing and Technical Specification for RCC M-40 grade for anti crash barrier, Using Batching Plant, Transit Mixer and Concrete Pump, i/c shuttering and vibrating etc but excluding steel reinforcement complete in all respect.

Providing and applying 2 coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and applying paint @ of 1 litre for 2 sqm.

Supplying Direction/Diversion Plate 900x300 mm rectangular with high intensity microprismatic grade retro reflective sheeting Type IV.

Labour for First class burnt brick work laid in mud mortar in foundation and plinth.

Dismanteling brick work in mud mortar

Providing and laying cement concrete M-15 for coping and sleeper mixed in automatic computerised batching and mixing plant and transported to the site in transit mixers complete in all respect in PWD specifications

Filling Contraction/ construction Joint with sealing compound complete in all respect.

Providing and fixing drainage spout complete as per drawing and Technical specification.

Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. 110mm o/d PVC pipe of 2.5 Kgf. /sqcm

Supplying and fixing of single mould twin shank reflective road studs made out of poly carbonate/ABS moulded body and reflective panels with micro prismatic lens or lass Beeds capable of providing total internal reflection of the light entering the lens face with retro reflectance and chromaticity values shall be as given in the detailed specifications and the product shall conform to ASTM D4280.

Cautionary sign board 900x900x900mm triangular as per IRC 67- 2012 with high intensity Microprismatic grade retro reflective Sheeting as per ASTM D 4956 09 and as per IRC 67 2012 as per CSR 24.44 (ai)

Definition Plate 600x200mm rectangular as per as per IRC 67- 2012 with high intensity Microprismatic grade retro reflective Sheeting as per ASTM D 4956 – 09 and as per IRC 67 – 2012.

Mandatory sign board 900mm circular as per IRC 67- 2012 with high intensity Microprismatic grade retro reflective Sheeting as per ASTM D 4956 – 09 and as per IRC 67 – 2012.

Hazard Marker sign board 300x900mm rectangular as per IRC 67- 2012 with high intensity Microprismatic grade retro reflective Sheeting as per ASTM D 4956 09 and IRC 67 2012,

Providing and fixing of Standard Metal Delineator as per IRC 79:2019 consisting of retro reflective area in white color using full cube corner micro prismatic non-metallic retro reflective sheeting on each side conforming with IRC 67 2012

Filling expansion joint with special bituminous material for joint size aprox 20mm wide and 400mm deep.