Construction of Dining Hall / Kitchen Block at High School Liktsey Phase II. (D.Plan)

Amount

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°,landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement with 1.1.5:3 ( 1 cement : 1.5 coarse sand : 3 graded stone aggregate20mm nominal size.

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.Thermo-Mechanically Treated bars.

Centring and shuttermg including strutting, propping etc. and removal of form for·a)Suspended floors, roofs, landings, balconies and access platform.

b)Edges of slabs and breaks in floors and walls.Above 20cms wide

Dry stone pitching (any thickness) including cost of stones. On Horizontal

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level. 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal size) Crushed

15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 fine sand)

12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand)

Providing and fixing glazed shutters for doors, windows and clerestory windows using 10kg/sqm (4mm thick) glass panes including black enamelled lSI marked butt hinges with necessary screws. Excluding panelling second class kail wood.

Providing and fixing paneled or paneled and galzed shutter for doors, windows and clerestory windows including ISI marked M.S pressed but hinges bright finished or required size wih necessary screws excluding paneling which will be paid separately, all complete as per direction of Engineer in charge first class kail wood (35mm thick.)

Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately) : 12 mm thick

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade. Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.

Applying priming coat: with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

6mm thick cement plaster to ceiling of mix 1:3 (1 cement :3 fine sand)

Finishing walls with water proofing cement paint of required shade New work (two or more coats) applied @3.84 kg/1 Osqm

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including priming coat with cement primer

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately) : 12 mm thick

Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately) : 18mm thick

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position : Budloo I Fir wood

Providing and fixing ply wood 4mm thick one side decorative veneer conforming to IS: 1328(type 1 ), for plain lining/cladding with necessary screws, including priming coat on unexposed surface with: Decorative veneer facings of approved manufacture

Providing and fixing aluminium handles lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 75mm

Providing and fixing 2nd class teak wood lipping/moulded beading or Taj beading of size 18x5mm fixed with wooden adhesive of approved quality and screws/nails on the edges of the pre laminated particle board as per directions of the engineer-in-charge

Providing and fixing magnetic catcher in cup board/ward robe shutters including fixing with necessary screws etc. Complete (Best make of approved quality) Triple strip (Verticle type)

French spirit polishing with Two or more coats on new works including a coat of wood filler.

Providing and fixing gang saw cut mirror polished (pre moulded and pre polished), machine cut for kitchen platform, vanity counters window sills facias and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish etc. complete at all levels.Granite of any colour and shape (Area of slab over 0.5 sqm) 18mm thick

Providing and fixing 1st quality ceramic glazed tiles conforming to IS :·13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Eningeerin- Charge in skirting, risers of steps and dados over 12mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing Ceramic gla.z:ed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 13755 of NITC.O, ORIENT, SOMANY, KAJARIA or equivalent make in colour suchas White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of Cement Mortar 1: 4 ( 1 cement : 4 coa.rse sand) including pointing the joints with white cement and matching pigment etc., complete.

Providing and fixing white vitreous china pedestal type water closet ( European type) with seat and lid , 10 litre low level white vitreous china flushing cistern and CP flush with fittings, C. I./M.S. brackets 40mm bend diameter flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required:W.C. pan with lSI marked white solid plastic seat and lid. with white vitreous china flushing cistern & C. P. flush bend.

Providing and fixing wash basin with C.I / M.S brackets, 15mm C.P brass pillar taps, 32mm c.P brass waste of stndard pattern, incluidng painting of fitting and brackets, cutting and making good the walls wherever required white vitreous china wash basin size 550 x 400mm with single 15mm C.p brass pillar taps.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour:600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms.

Providing and fixing toilet paper holder C.P brass.

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with brackets of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank lSI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base supportfor tank [Sintex, Electroplast, Star, Lotus or equivalent having valid lSI license].

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes SOR 7.4 UV stablized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fitings 1/C fixing the pipe with clamps at 1.00m spacing. This includes cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-charge. (concealed work including cutting chases and making good the walls etc.) a) PN-16 pipe , 20mm 00

b)Pn-16 pipe , 32mm 00

Providing and fixing C.P. brass bib cock of approved quality conforming to 15 mm nominal bore

Providing and fixing PVC waste pipe of required dia including bends Tee dooor bend , L bend trap jointed with addisive material ISI marked like prince vectoror equivalent brand all complete job.a) 100 mm dia bore

b) 75mm dia bore

Providing and fixing gun metal non-return valve of approved quality (screwed end)Vertical.

Providing and fixing C.P. brass close hole basin mixer piller tap of approved quality and make, weighing not less than 1.970 kg. a) 15 mm nominal bore of standard back type.

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet 150 mm diameter

Providing and fixing mirror of superior glass( of approved quality) and of required shape and size with plastic . moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 1500x450 mm

Cement concrete flooring 1:2:4 ( 1 cement: 2 coarse sand . : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete.50 mmthick with 20mm nominal size stone aggregate. (a) Crushed.

Random Rubble masonry with hard stone from nallah in foundation and plinth including levelling up with cement concrete 1 :6:12 ( 1 Cement: 6 coarse sand : 12 graded stone aggregate 20mm nominal size) at plinth level with cement mortar 1:6 (1 Cement: 6 coarse sand)

Carriage of material by MT a)Cement an average lead 60Km.

Carriage of material by MT b)sand an average lead 45 km

Carriage of material by MT c) stone agg, an average lead 45Km.

Carriage of material by MT d) Stone an average lead 10Km.

M/S TUNDUP WANGIAL