Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.6 LAccepted-AOC 63 BAJMASTA RAMBAN | RAMBAN | RAMBAN | JAMMU AND KASHMIR | L1 | Accepted-AOC L1 Bidder | |
| 2 | L2₹28.8 L+₹1.2 L (4.33%)Rejected-Finance | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹28.8 L+₹1.2 L (4.52%)Rejected-Finance | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹31.1 L+₹3.5 L (12.6%)Rejected-Finance | L4 | Rejected-Finance Other than lowest |
Tender Value
₹28 L
EMD Value
₹56,000
Closing Date
14 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(I) 873 EWS
Garrison Engineer (Indep) 873 Engineer Works Section PIN 913 873 C/O 56 APO
ADDITION / ALTERATION TO BLDG NO T-249, PROVN OF ENTRANCE GATE, PROVN OF BATHROOM BLOCK WITH ALLIED INFRA AND PROVN OF PATHWAY POST NO 7 TO MT MANDIR AT DHARMUND MIL STNUNDER GE (I) 873 EWS
2022_MES_567634_2
NIT-70 of 22-23
Open Tender
Civil Works - Canal
Item Rate
270 days
Bhaderwah
As per NIT
7 documents required · 7 mandatory
₹500
GE(I) 873 EWS
₹56,000
Yes
7 Feb 2023
23 Dec 2022
17 Jan 2023
23 Dec 2022
14 Jan 2023
31 Dec 2022
Amount
Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in any type of soil, complete all as specified and directed.
Excavating in trenches, not exceeding 1.5metre wide and not exceeding 1.5metre depth for foundation, etc., and getting out in any type of soil, complete all as specified and directed.
Excavation over areas not exc. 1.5m deep in hard/dense soil and getting out, complete all as specified and directed.
Excavation over areas exc. 1.5m and n. exc 3.00m deep in any type of soil and getting out, complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick any type of soil, complete all as specified and directed.
Removing excavated soils to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.
Removing building materials etc. (other than spoil payable under items 6 heein before) to a distance of 100m or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and directed.
Excavation in post holes (or similar holes) each not exc. 0.50 cum, in any type of soil and getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exc. 25cm, watering and removal of excavated materials to a distance n. exc. 50m and making good surfaces, complete all as specified & directed.
Hard core of broken stone gauge exceeding 63mm and not exceeding 100mm deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surfaces, complete, all as specified and as directed.
Plain Cement concrete 1:4:8, type D-2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete, complete all as specified and directed.
Plain Cement concrete 1:3:6, type C-2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete, complete all as specified and directed.
Plain Cement concrete 1:2:4, type B-2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete, complete all as specified and directed.
RCC M-25 (Design mix) using 20mm graded crushed stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete, complete all as specified and directed.
RCC M-25 (Design mix) using 20mm graded crushed stone aggregate as in columns, pillars, piers, posts and struts, complete all as specified and directed.
RCC M-25 (Design mix) using 20mm graded crushed stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.
RCC M-25 (Design mix) using 20mm graded crushed stone aggregate as Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
RCC M-25 (Design mix) using 20mm graded crushed stone aggregate as in chajjas complete all as specified and directed.
PCC 1:2:4 type B-1 (Nominal mix), using 20mm graded crushed stone aggregate as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, coping, bed plates and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work, complete all as specified.
Formwork to sides of concrete foundation, footings, bases of columns, rafts and raft beams and similar work; vertical or to batter for rough finished surfaces of concrete, complete all as specified and directed.
Formwork to sides of pillars, posts, struts, columns (square, circular rectangular on plan or polygonal etc. for rough finished surfaces of concrete, complete all as specified and directed.
Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for rough finished surfaces of concrete, complete all as specified and as directed.
form work to soffits of suspended slabs such as roof slabs, floor slabs landings and similar work, not exceeding 200mm thick (horizontal or sloping) for rough finished surfaces of concrete, complete all as specified & directed.
Form work to chullah hoods, chajjas, troughs and similar items including edges for rough finished surfaces of concrete, complete all as specified & directed.
Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6m mean radius built in in CM 1:6, complete all as specified and directed.
Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6m mean radius built in in CM 1:4, complete all as specified and directed.
Brickwork with sub-class ‘B’ bricks (old size), straight or curved on plan exc. 6m in mean radius, built in cement mortar 1:4 in half brick wall, complete all as specified.
TMT bars 10mm dia & over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified & directed.
All as per Srl item No. 27 here-in-before but 6mm dia to 8mm dia.
All as per Srl item No. 27 here-in-before but 5mm dia & over upto & including 10mm dia in stirrups, spacers and binders complete all as specified & directed.
Mild steel rolled work as in roof trusses (framed), purlins, crane gantries, rails and fastening and heavy bracket framing (beam, tee, angle, square / rectangle sections, channel or flat section) including distance pieces, cleats etc. Fe 410 -W (Gde-E- 250) quality-A complete all as specified and directed.
Rolled mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410 -W (Gde-E- 250) quality-A complete all as specified and as directed.
Rolled mild steel work in joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary length i.e. within 20mm of the length indicated), Fe 410-W (Gde E-250) quality 'B' complete all as specified & directed.
Pre-painted galvalume aluminium zinc coating G.I based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering, fixed with self taping screws, complete all as specified and directed.
Pre-painted galvalume aluminium zinc coating G.I based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering / cladding to wall, fixed with self taping screws, complete all as specified and directed.
1.60mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.
Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe 410-W (Gde E-250) quality 'A' all as specified and directed.
Mild steel framed works such as grills, framed guard bars, etc. and similar work including bending, cutting and welding as required, Fe. 290.Gde-E- 165 complete all as specified and directed.
Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fitted in openings as per specification and drawing shown in SSR Part-II, complete all as specified.
Factory made solid core PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC sheet, 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap inserted for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified & shown in relevant drawing of item No. 08080 in MES Schedule (Part-II) all as directed.
Pressed steel frames of size 105mmx60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, PCC 1:3:6 type C-0 for filling of hollow portion, complete all as specified
32mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified
Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21, 100mm long, complete all as specified.
Extruded aluminium alloy handle, fabricated type, anodised, 150mm long (ISI marked), complete all as specified.
Aluminium anodised, barrel tower bolt of extruded section and fixed, 150mm long (ISI marked), complete all as specified.
Aluminium anodised, barrel tower bolt of extruded section and fixed, 200mm long (ISI marked), complete all as specified.
Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, 300mm long, all as specified.
Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, 250mm long, all as specified.
150mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified.
Steel windows with side hung shutters including projecting type hinges with steel handle 100mm long, made of Z section and steel peg stay, complete with glazing bars, dovetailed or welded and two numbers MS tower bolt of 100 mm long, complete all as specified & directed.
Steel ventilators with top hung shutter including hinges, steel peg and stay and two numbers MS tower bolt of 75 mm long complete all as specified and directed.
Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire, staples all as specified and directed.
4 mm thick non asbestos fiber cement plain building boards in false ceiling on and incl aluminium snap grid work 605 x 605 mm with using 36.5mm x 23.5 mm x 1.5 mm thick main tee, 23.5 x 23.5mm x 1.28 mm cross tee and 25x25x1.5mm angles fixed to perimeter of wall including necessary supporting hanger with 3 mm dia GI wire and J bolts washer nuts for securing frame work to ceiling suspended @ 120 cm c/c both ways, complete all as specified and directed.
3mm thick sheet glass ordinary quality and glazing with oil putty / screws, in square not exceeding 0.5 Sqm in each pane complete all as specified and directed.
75mm thick PCC 1:4:8, type D-2 (using 40mm graded crushed stone aggregate) as in sub base of flooring finished even and rough, to receive floor finishes, complete all as specified and as directed.
40mm thick PCC 1:2:4, type B-0 (using 12.5mm graded crushed stone aggregate) as in flooring finished even and smooth without using extra cement complete all as specified and as directed.
Supply only glass dividing strip 3mm thick 38mm width, inserted in flooring, complete all as specified.
25mm thick PCC 1:2:4, type B-0 (using 12.5mm graded crushed stone aggregate) as in floor, finished rough to receive tiles above, complete all as specified & directed.
Non-sked ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match, laid over and including 15mm thick bedding layer in cement mortar 1:4, complete all as specified.
Non-sked ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match, laid over and including 15mm thick bedding layer in cement mortar 1:4, complete all as specified.
Glazed ceramic tiles, coloured of size 350x250x7mm / 450x350x7mm as in vertical surfaces such as skirting/dado etc., set and jointed in neat cement slurry and pointed with white cement, laid over and including 10mm thick plastering in cement mortar 1:3, complete all as specified
External elevation wall cladding tiles, made of natural slate with split face, size 600x150x10mm / 450x300x10mm thick as approved colour / pattern laid over and including 10mm thick backing coat in CM (1:3) complete all as specified and directed. (Make:- Kajaria / Somany / H&R Jhonson / NITCO)
Factory made (rectified) precast concrete designer chequered tiles any colour, shape and size not less then 300mm x 300mm x 25mm thickness (compressive strength not less than 250 Kg/Sqm), pointed with grey cement and pigment over and including 20mm thick CM 1:4 screed bed or bedding layercomplete all as specified and directed.
Granite (of any type) tiles 20mm thick, work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granitecomplete all as specified & directed.
Machine cut kota stone slab flooring, 18-20 mm thick as per sample kept in GE's office, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab, laid over and including 20mm screed layer in cement mortar 1:4, rubbing, grinding and polishing to achieve mirror finish, complete all as specified.
Machine cut kota stone slab, 18-20 mm thick as per sample kept in GEs office as in vertical surfaces such as skirting/dado etc., laid and jointed with grey cement slurry mixed with pigment to match the shade of slab, laid over and including 10mm thick plastering in cement mortar 1:3, rubbing, grinding and polishing to achieve mirror finish, complete all as specified.
75 mm thick plain cement concrete (1:3:6), type C-1 using 20mm graded stone aggregate as in plinth protection, and laid in panels complete and finished the even & fair and providings joints through out the thickness of plinth protection filed with mastic filling comprising one part of 01 bitumen 85/25 grade and three part of sand by weight all as specified and directed.
150mm thick PCC 1:4:8, type D-2 (using 40mm graded crushed stone aggregate) as in lean concrete of hardstanding complete all as specified and directed.
100mm thick PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregate) as in hard standing, finished the surface even and fair complete all as specified and directed.
Forming Construction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade ‘A’, complete all as specified & directed.
Rendering 15mm thick in cement mortar 1:4 on other than fair face of brickwork or on one side of lathing, finished even and smooth without using extra cement, complete all as specified.
Rendering 15mm thick in cement mortar 1:6 on other than fair face of brickwork or on one side of lathing, finished even and smooth without using extra cement, complete all as specified.
Bib taps, long body,15mm bore of cast copper alloy chromium plated (ISI marked) fancy type, screwed down, high presure, screwed both ends for iron pipe or for brass ferrule, fixed in repairs, complete all as specified and directed.
Stop cock of cast copper alloy chromium plated (ISI marked), fancy type, screwed down high pressure, screwed both ends for iron pipe or for unions 15 mm bore, fixed in repairs, complete all as specified and directed.
Angle or plain stop valve of cast copper alloy chromium plated (ISI marked), fancy type, screwed down high pressure, screwed both ends for iron pipe or for unions 15 mm bore, fixed in repairs, complete all as specified and directed.
Pillar tap cast copper alloy with capstan head, fancy type, chromium plated (ISI marked), screwed down, high pressure, with or without lettered 'Hot or Cold' with long screwed shank and fly nuts screwed for iron pipe complete for 15mm bore pipe, fixed in repairs, complete all as specified and direct
PVC connection 15mm size with length 450mm with brass nuts, fixed in repair, complete all as specified and directed.
Brass chromium plated shower rose 125mm size with or without swivel joints, including fixing to steel pipe or union complete all as specified & directed.
Towel rail aluminium anodised tubular, 20mm dia, D type, 60cm long between flanges, complete all as specified.
15mm dia GI steel water tubing ,medium grade ISI marked, with and incl all fittings such as bends, elbows, tees, short pieces, diminishing pieces, union etc complete to walls and ceilings or laid in floors complete all as specified.
20mm dia GI steel water tubing ,medium grade ISI marked, with and incl all fittings such as bends, elbows, tees, short pieces, diminishing pieces, union etc complete to walls and ceilings or laid in floors complete all as specified.
Vitreous china squatting pan (Orissa pattern) size 580 x 440 mm, white, with integral foot rests (excluding flushing cistern and flush pipe) incl provision of cement concrte bedding, CI 'P' trap 100mm dia, connection to trap and fushing pipe, anti-syphonage complete all as specified and directed.
Vitreous China, wash hand basin, flat back white of size 550mmx400mm including brackets, brass CP waste coupling 32mm dia with long screwed shank and fly nuts, exclusive of waste pipe, chain and plug, porcelain stopper including cutting for and pinning in ends of brackets , complete all as specified.
Vitreous china urinal flat back of size 465x355x265mm white complete with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed.
PVC valveless, syphonic action type flushing cistern, 10 litres capacity, plunger type, low level, white with inlet, ball valve, float and handle, 32 mm dia PVC long bend flush pipe 90cm long, complete all as specified.
PVC (SWR) pipes, 75mm dia, single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified & directed.
PVC (SWR) pipes, 110mm dia, single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified & directed.
100mm dia of bore cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors complete all as specified & directed.
100 dia of bore cast iron coewls complete all as specified & directed.
32mm bore PVC flexible waste pipe for WHB complete all as specified & directed.
32mm bore PVC flush pipe for low level cistern complete all as specified & directed.
PVC (SWR) ‘P’ or 'S' trap, bore of pipe 110mm, complete all as specified.
PVC (SWR) floor trap of 75mm dia of outlet, plain with grating including jointing with solvent cement complete all as specified.
110mm bore PVC (SWR) bends any radius, complete all as specified.
75mm bore PVC (SWR) bends any radius, complete all as specified.
15mm bore gun metal globe or gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe fixed in repair, complete all as specified.
20mm bore gun metal globe or gate valve (ISI marked) with iron wheel head, screwed both ends for iron pipe fixed in repair, complete all as specified.
Soap dish stainless steel, any size fixed to plugs with brass chromium plated screws and wooden/plastic cleats, complete all as specified.
Cutting existing steel tubing for alterations or additions (Each cut measured) complete all specified & directed
Rotational moulded polythene water storage tank, white coloured, tripple layer cylindrical vertical with closed top 1000 litre capacity hoisted and fixed in position, including inlet and outlet pipe connections, 20mm dia and 15 mm dia GI pipes medium grade respectively, 20mm GI pipe medium grade over flow pipe 15 cm long wash out with plug and PTMT ball valve 20mm (Minimum weight 2 1 0 g m s), high pressure with polyethelyne float and fly nuts complete all as specified and directed.
Prepration of new plastered surfaces of wall and applying two coats of oil bound distemper including one coat of alkali-resistant primimg paint complete all as specified and directed.
Preparation new plastered surfaces of walls and applying two coats of cement base paint including one coat of alkali-resistant primimg paint complete all as specified and directed.
Preparation of new or previously untreated wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified.
Preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint, over a coat of red oxide primer, complete all as specified and as directed.
Prepration of old decorated steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified
Construction of soakage well 1.80m dia and 3m depth (Internal dimensions) (Brick masonry construction), complete all as specified and as shown on drawing No CEUZ/TD/1202/03 Sheet 1/2 dt 14.10.14 and 2/2 dt 11.05.07.
Precast cement concrete (1:2:4) using 20mm graded crushed stone aggregate as in landings, cover slab (for manholes etc), and similar articles with plain fair faces including chamfers, weatherings, throating etc. and setting in cement mortar (1:4) including necessary form work complete all as specified and directed.
Concrete bed to 150mm bore drain pipes including packing under, and haunching against the sides of pipes after they are laid in cement concret 1:4:8 (Nominal mix) type D-2 using 40mm graded stone aggregate, and tested, complete all as specified & directed.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi tred/stopped ends etc.
Salt-glazed stoneware drain pipe, internal dia of pipe 150mm, laid in trenches and jointed and tested, complete all as specified including taking down old unservicable pipes.
Taking down chowkats or frames including shutters (without taking off shutters from the frame) exc. 1.5 Sqm but n exc 4.0 sqm each, complete all as specified.
Taking down chowkats or frames including shutters (without taking off shutters from the frame) n exc 1.5 sqm each, complete all as specified.
Demolition of brickwork or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified.
Demolition of cement concrete in ground floors and paving not exceeding 15cm thickness (below or above ground level) un-reinforced and disposal of unserviceable materials, debris and rubbish to a distance 200m or under including loading, unloading and stacking, complete all as specified & directed.
Dismantling plain or corrugated steel sheeting any gauge, thickness including nanital or similar pattern from roof covering or in ridges, hips, valley gutter and similar works complete, all as specified and directed.
Dismantling wrought iron or mild steel work of any description complete all as specified and directed.
Taking out carefully copper / aluminium point wiring, (Light, fan, socket or power) complete with all fitting, fixtures such as switch socket out let, ceiling rose, holder, regulator, DB's etc. including making good the disturbed surface of wall/floors, complete all as specified and directed.
Point wiring with multi stranded copper conductor of size 1.5Sqmm PVC insulated unsheathed FRLS cable in and including PVC casing capping 20/30mm size or as required at site including its fittings and fixtures such as ties, bends, elbows and junction boxesetc. including 1.50 Sqmm copper earth wire (green colour) FRLS Cable as earth continuity conductor connected to main earthing and common earth terminal for one light point or fan point or bell point controlled by one No, one way switch using cable of different insulation colour for colour coding including 3mm thick laminated sheet cover, mild steel sunken box including cutting chases and making good to disturbed surfaces of wall / floor, complete all as specified and directed.
All as per the description of Serial Item No 118 here-in-before but for one 3 pin socket outlet 5 Amp independent, complete all as specified and directed.
All as per the description of Serial Item No 118 here-in-before but for one 3 pin socket outlet 15 Amp independent board using cable of size 2.50 Sqm with 2.50 Sqmm copper conductor in green colour for as earth continuity conductor all as specified and directed.
Switch piano, flush type, 5/6 Amps, single pole, one way complete all as specified and directed.
Socket out let 3 pin 5/6 Amp, piano flush type, 240 volts complete all as specified and directed.
Switch socket out let combination universal type, 2 in 1, 2 and 3 pin 5 Amp, piano flush type, 240 volts complete all as specified and directed.
Switch socket outlet combination universal type, 2 in 1, 3 pin 5 and 15 Amp, piano flush type, 240 volts complete all as specified and directed.
Point wiring with multi stranded copper conductor of size 1.5Sqmm PVC insulated unsheathed FRLS cable in and including concealed stove enamelled steel conduit and accessories of suitable size for concealed wiring including 1.50 Sqmm copper earth wire (green colour) FRLS Cable for one light point or fan point or bell point controlled by one No, one way switch/one bell/buzzer point using cable of different insulation colour for colour coding for one light point or fan point or bell point controlled by one No, one way switch using cable of different insulation colour for colour coding including 3mm thick laminated sheet cover, mild steel sunken box including cutting chases and making good to disturbed surfaces of wall / floor, complete all as specified and directed.
All as per the description of Serial Item No 125 here-in-before but for one 3 pin socket outlet 5 Amp on same board, complete all as specified and directed.
All as per the description of Serial Item No 124 here-in-before but for one 3 pin socket outlet 5 Amp independent, complete all as specified and directed.
All as per the description of Serial Item No 124 here-in-before but for one 3 pin socket outlet 15 Amp independent board using cable of size 2.50 Sqm with 2.50 Sqmm copper conductor in green colour for as earth continuity conductor all as specified and directed.
Electronic fan regulator stepped type with five step 240 volts 100 watt suitable for 1200mm / 1400mm sweep AC ceiling fan, complete all as specified and as directed.
LED light fitting 1x20 watt, 220V, AC decorative box type with driver, holder including LED tube light connecting up cable of copper conductor size 3-core ,23/0.0076 from ceiling rose to light fitting connector complete all as specified and directed. Make :- HAVELL's Cat No LHEXARP7SN1W020 or equivalent in Crompton /Philips
Bulk head luminaries complete with all accessories suitable for and including 1 x 10 Watts LED lamp including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230 Volts 50 Hz complete all as specified and as directed. Make : Havells Cat Part No LHEOAOP7UZ6W010 / Crompton Cat Part No LBHE-10-CDL
Ceiling rose surface bakelite three terminals 240 volts complete all as specified and directed.
Sheet metal enclosure factory made single door for DB 240 volts with 200 Amps rated bus bar SPN 2 Way complete all as specified and directed.
Sheet metal enclosure factory made single door for DB 240 volts with 200 Amps rated bus bar SPN 4 Way complete all as specified and directed.
MCB SPN 32Amp 10 KA 240 Volts, 'C' Series, complete all as specified and directed.
MCB SPN 40 to 63Amp 10 KA 240 Volts, 'C' Series, complete all as specified and directed.
MCB SP 5 to 32Amp 10 KA 240 Volts, 'C' Series, complete all as specified and directed.
1100 Volt grade heavy duty cable PVC Insulated aluminium conductor, served with inner sheathing of PVC tape and over all PVC sheathed in service connection suspended by insulating hanger not more than 1 mtr apart including 4 mm suspension wire, one twin core cable flat or circular 16 sqmm stranded conductor, complete complete all as specified and directed.
1100 Volt grade heavy duty cable PVC Insulated aluminium conductor, served with inner sheathing of PVC tape and over all PVC sheathed in service connection suspended by insulating hanger not more than 1 mtr apart including 4 mm suspension wire, one twin core cable flat or circular 10 sqmm stranded conductor, complete complete all as specified and directed.
Ceiling fan of size 1200mm sweep with fan regulator, 230 volts (single phase) min air delivery 210 CFM with service valuve 6.00 BEE 5 star rated with btushless direct current mortor (BLDC) including provisioning of three core flexiable copper cord of size 23/0.0076 of required length from ceiling rose or connector to ceiling fan for connection, complete all as specified & directed.
Exhaust fan with louvers of size 300mm sweep, 900 RPM, 230 volts (single phase) complete with bolts, nuts & washers, embedded in the wall including provisioning of three core flexiable copper cord of size 23/0.0076 of required length from ceiling rose or connector to Exhaust fan for connection, complete all as specified & directed
Exhaust fan with louvers of size 450mm sweep, 900 RPM, 230 volts (single phase) complete with bolts, nuts & washers, embedded in the wall including provisioning of three core flexiable copper cord of size 23/0.0076 of required length from ceiling rose or connector to Exhaust fan for connection, complete all as specified & directed
Sub main wiring with two single core PVC insulated multistranded un-sheathed FRLS cable of size 2x1,5 Sqmm with stranded copper conductor, drawing into PVC conduit of suitable size with continuous PVC insulated multistranded unsheathed FRLS cable earth wire of 1.5 Sqmm dia including taking out unserviceable sub main wiring, complete all as specified and directed. Note : Two run of 1.5 Sqmm wire, one run of 1.5 Sqmm wire and one run of PVC conduit shall be considered as one unit length.
15W LED gate post light of new generation, IP65, LED post top family, energy saving, envoirmental friendly, ong life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source, Opal cover offers soothing uniform illumination for different application to be fitted with GE pipe complete all as specified and directed. (Mke: Havells Cat part No. CORALMINIPT15WLED830PSYMTOPC or equivelant make Philips/ CG)
15mm dia GI steel water tubing, light grade ISI marked, with and incl all fittings and fixed to column for fixing gate light complete all as specified.
Earthing complete with galvanized mild steel earth plate electrode size 600mm x 600mm x 6mm thick buried directly in ground (preferably in vertical position) earth pit not less than 2.25 meter below normal ground level with top edge of the earth plate not less 3 meter (BGL) connected to galvanized iron earth lead wire 4mm dia by means of bolts, nuts, check nut and washer of galvanized iron including PCC pit in RCC 1:2:4 type B-1, precast RCC cover with suitable handle, excavation and earth work in any type of soil, 20mm bore “medium grade” galvanized iron water tubing fixed with cast iron funnel and wire mesh and 15mm bore “light grade” galvanized iron protection pipe for earth lead wire upto 5m length, charcoal, common salt, complete all as shown in EP No 3 of SSR 2009 Part-I, connected to test point complete, all as specified and testing on completion.
M/s ROSHAN LAL GUPTA
M/S HAJI MOHD SHAFI AND SONS
M/S DHARAM PAUL GUPTA
Bidder Name
M S BANSI LAL CONSTRUCTION CO
M/S DHARAM PAUL GUPTA
M/S HAJI MOHD SHAFI AND SONS
M/s ROSHAN LAL GUPTA
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .