Providing and fixing of high mast near bhuvi galli masidi at ward no 15 and installing street lights at ward no - 5,18 in the limit of TMC Terdal

Installing street lights at ward no - 5,18 in the limit of TMC Terdal

Supply of LED Streetlight luminaire with pressure die castaluminium housing body for optimal thermal dissipation.Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycar...

Supplying and Fixing of.mm dia class A GI pipe bracket upto 2 mts long bent at suitable angle and fixing to this bracket 1x40 2x40 W fluorescent tube street light fitting of allcapacities to GI or GI ...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Providing and fixing of high mast near bhuvi galli masidi at ward no 15 in the limit of TMC Terdal

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever nec...

Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, inc...

Providing and laying in position plain cement concrete for levellingcourse for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS ...

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Fabricating,supplyinganderectionof.mslonghotdipGalvanizedOctagonalhotdipPolewithBSEN10025gradeS355JOsteelplateforshaft,IS2062forbaseplatewithdooropeningarrangements,includingsuitableboards,Bakeliteshe...

Supplying & fixing of Porcelainf use channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. 63 A (COMMON SR 2023-24 Vol-6, P.NO -14 Item No -5.7.3

Supply and fixing of 3pole power contactor with NO/NC contact son existing wood/panel board using necessary bolts,nuts,washers and wiring etc., complete with AC-3 Rating and as per IS-13947.40 A (COMM...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and' C' Type curve,indicatorON/OFF,energy cross-3with Short circuit breaking capacity...

Supplying and fixing angle iron frame work fabricated out of M.S.angleiron.and M.S.Flat.with bolts,washers etc.,and painted with 2 coats of red oxide and then two coats of approved paint.40 x 40 x 6 m...

Fabricating supplying and mounting MS box made out. SWG suitable for floor/wall mounting, fully weather proof with provision for better heatd is sipation, provided with hinged front cover, equipped wi...

Supplying and fixing Micro processor Based Astronomical timer Switch with using necessary bolts, nuts and washers.(COMMON SR 2023-24 Vol-6, P.NO -21 Item No -5.48)

3 Q Connector(RYBE) (MR)

Supply of LED flood light luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of antigla reclear diffuser with Injection moulded poly c...

Supplying, fixing ,wiring, earth electrode for grounding conduits, I.C.cut out sand ot her equipment's on the meter board using 40mmdia 2.90mm thick GIpipe2.5m long buried in a pit. The pit should be ...

Supply and laying double walled corrugated (DWC) HDPE Pipe including all necessary connecting Sockets / Couplings / Tees / Bends/End -caps of same materials in existing trench as per IS 14930 part -II...

Supplying of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath

Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip

thickness and resistivity as per IS...

Digging of Trench of 0.6 m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc.complete (As per Civil SR KSRB I-2, P-7) in Soil ( Hard) (COMMON SR 2019-20 , P....

Supplying and drawing Flexible Multi core Cable manufactured with electrolytic grade flexible copper with low conductor confirming toIS8130-1984 and (Virgin) PVC insulations heathed suitable for worki...

Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming toIS8130- 1984 and (Virgin) PVC insulation sheathed suitable for worki...

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes 16 aqmm (COMMON SR 2019-20 , P.NO -43 Item No -6.17.6)

Labour charges for laying of 1.1 KV class UG cable in exiting trench GI pipe / stoneware pipe/on wall/on pole as required 6 sqmm to 16 sqmm (COMMON SR 2019-20 , P.NO -41 Item No -6.5.1)

Fixing of Pole Fuse Board (COMMON SR 2019-20 , P.NO -48 Item No 13.07)

Fixing of Pole Fuse