Item 2 Renovation Modernization of PS PA Room in Housing Commissioner Cell at Head Office Building Jaipur

Amount

P&F wall penelling using Soft wood Flame of Size 50x25mm @ 600 mm c/c in both direction duly treated with anti-termite treatment making grooves painting of grooves specification and drawing using: ISI 9mm teak ply one side BWR

Supplying of chief Executive table. Table size 2400x1050x750mm of approved make with following specification. The table top is made up of 18mm thick PLB with PVC lipping. The size of the top is 2400x1050x750mm (WxDxH) Modesty panel is made from 18mm thick PLT with PVC lipping. Bigger upper panel in black and smaller lower panel in white cedar. Mobile pedestal is one box and one filling deawer with 18mm thick PLB fronts and top. The two drawer(1box drawer & 1filling drawer) Mobiles pedestal is available in one size 390x435x529mm. The top &drawer fronts are in white cedar while or approved shade the other com[ponents are in bal. handles are black powder coated die cast aluminium alloy handles. The entire unit is complete in all respect and made as per design and as direction by Engineer-in-charge.

Supplying of side table size 1350x600x750mm of approved make with following specification. The table top is made up to 18mm thick PLB with PVC lipping. The side panel is made up from PLT with PVC lipping having one key board with 18mm thick PLB arrangement. The entire unit is complete in all respect and made as per design and as directed by Engineer-in-charge.

PARTITION: P/F free standing modular partition of minimum 60mm to thickness having ISO 90001, 14001, 18001 certuficate for constructing modular workstations. The patition should be fully modular having best authentic look consisting all housing devices for fixtures and separate recewaya for laying electric and computer wiring. The modular partition are an assembely of the following parts:A Frames: Frame horizontal are made of 1mm thick CRCA sheets& vertical are made of aluminum extrusions in aluminum with contoured edges. End caps are in mazak Die cast waterfall sides. All the frames will be duly powder coated as per customer choice. All the frames are fastened together by means of M6 NUTS & BOLTS. They can be attached to form a 2 way, 3 way or a 4 way configuration. All the caps are VIZ end, liline& universal & raceway caps are made out of die-coast Aluminum.These caps are finished in as epoxy powder coating finish in the same colour. All the frames fitted with M10 leveling bolts.Paneling should be done from both side of paetition with:Laminates tiles: made out of aluminum 4mm thick prelaminated medium density fiber board (MDF). Medium density fibre board (MDF) and covered with fibric of choice. Glass tile: 4 mm toughened glass fixed within an aluminum powder coated frame. Twosuch tiles on either of the frame complete the assembly. Bottom row of steel tile: Constructed out of 0.8 mm thick medium CRCA sheets & finished in as epoxy powder coating can be given with plain /perforations /embossed finishes.Magnetic tile:Constructed out of 0.8 mm galvanized sheet and covered with fabric of choice. White board highly wear resistan face laminate with a balancing laminate on the back. Total thickness is 5mm.'C. Wire Management: The parition has two integrated raceway provided one at skiritiling level and another at the surface level thus ensuring sepration of power & networking cables.The cable can be taken into the frame from the flor from the bottom. Once the cables enter the frames, it can be taken from one and to the other end continuosly as per power/LAN layout plan. Approximately 50-60 (5mm dia) cables can be accommodation the raceway channels.D.RACEWAY: the raceway are made out of 0.8 mm thick CRCA & powder coated. The electrical worktop, these are hook on type which will bemounted on the verticals. The skirting/Data raceway are provided with CRCA snap cover on both side of raceway where required or no side depending upon where worktop is being used. The second raceway at worktop level can be given either below table top or above tabletop. The cable running at skirting level can be terminated at tabletop level through disciplined wiring channels

WORK TOP: P&F table top & cable ends made up of 25mm thick pre-laminted particleboard conforming to IS:coated M.S. brackets fixed to the partition frame support the tabletop.Gable ends are of 25mm thick both side laminate (BSL) with 2mm PVC imported edges banding,PVC edge banding are imported from Rehau or Dolken of germany. Worktop is also provided with ABS wire manager of 50mm dia.

DRAWER UNIT: Pedestal drawer unit: The pedestal drawer unit of dimensions 4000Wx470D675mm H us made of 18mm thick pre laminated partical board conforming to IS: 12823 interior grade. All the exposed edges are sealed with 2mm thick PVC imported banding on sides & bottom. The top & drawer unit consis of 2 box are prelam part board. The drawer box fitted with roller slide from free movement. The drawer unit is provided with central locking system, Wherever in the three drawer & Locked with one key. PVC recessed handless are provided for easy mobility. PVC dege banding are imported from rehau or Dakejeb if Germany. The complete furniture unit is factory assembed with knock down fitting. The pedestal is fitted with additional (5th) castor to avoid topping of pedestal in case of opening of any/all of three drawer.

KEY BOARD: P&F keyboard made from CRC steel .it should run on powder coated M.S. channels of standard size & approved quality & fixing with nylon roller complete as per engineer in charge.

CPU TROLLY: P&F CPU trolly of 240mm height & adjustable width from 220mm to 320mm made from 1.6mm thick CRC steel sheet duly power coated with 2nos.Non locked.

Probiding & Fixing 12mm thick frosted glass @ wall apnelling as per design Drawing & detail specification

Providing and fixing Metal Box with wooden panelling ncluding melamine polish for planters as per given Drawing,design and specifications.

Small size (Circular)

Painting with royal Play paing of approved brand and manufacture of required colour to give on even shade two or more coats on exisiting wall

Painting Krincle Paint of approved brand and manufacture of required colour to give on even shade two or more coats on exisiting wall

Supplying padded conference chaires of apporved make as per given sepcifications

Presiding chaire Excutive high back chaires

General Chairs visitars chaird (Low back)

Add extra for rebolving system in chairs

Providing & Fixing of wooden ward rob size 30’x10’x2’ Structure as Vertical part, selves etc. made out 19 mm thick ISI Marked board and back side 12mm thick ply ISI marked and inner/outer side mika ISI Marked Use and front side sliding glass in in aluminium channels etc. in Account wing. at Head office building,jaipur

Bidder Name

Amount

Kiran Enterprises(GSTN-08APGPS5281J1ZC)

AK JAIN AND ASSOCAITES(GSTN-08ABTPJ7664B1ZB)

Kiran Enterprises

AK JAIN AND ASSOCAITES

AK JAIN AND ASSOCAITES