REPAIR AND MAINTENANCE OF STEEL FURNITURE ITEMS OF MARRIED ACCN, OTM ACCN AND UNITS AT SEVOKE ROAD MIL STN UNDER GE SEVOKE ROAD

Amount

ALMIRAH LARGE STEEL WITH SHELF (FD- 1031, 114(M) )

Removing old existing unsv handles from Almirah large steel and S&F new CP steel handle of size100mm to Almirah large steel and all as shown on drawing or as directed.

Removing old existing unsv lock from Almirah large steel and S&F new lock 75mm long, 06 lever with two keys to Almirah large steel all as shown on drawing or as directed.

Removing old existing unsv locking assembly from Almirah large steel and S&F new locking assembly to Almirah large steel including making adjustment of door shutters & applying one coat of synthetic enamel paint over a coat of red-oxide primer duly preparation of steel surfaces complete. Painting shall be done with spray machine and all as specified on drawing and as directed.

Removing old existing unsv leg from Almirah large steel and S&F new leg made out of 1mm thick CRCA Sheet made to size and shape and welding at bottom of almirah after applying one coat of synthetic enamel paint over a coat of red-oxide primer duly preparation of steel surfaces complete. Painting shall be done with spray machine and all as specified on drawing and as directed .

Removing old existing unsv butt hinges of Almirah large steel and S&F new butt hinges 75 mm long and adjusting door by revitting / welding complete all as shown on drawing and as directed.

M&L for refixing of loose shelves with mild steel revitting /spot welding complete all as directed.

Removing old existing unsv locking device cover from Almirah large steel and S&F new locking device cover made of 1mm thick CRCA sheet duly painted with two coat of paint over a coat of red oxide primer as approved quality to Almirah large steel.

Removing old existing unsv shelves from Almirah large steel and S&F new shelves as per existing drg and all as specified on drawing and as directed by Engr-In-Charge.

Note : 1. Removal of following existing unserviceable steel components of various MES pattern furniture items carefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components including tightening the joints, screwing, welding, glueing, providing hinges placing everypart in-tact condition as per drgs. 2. Cleaning Derusting of Stain/Dirt with Sand Paper making the Surface smooth,filling the holes with Putty wherever required and Applying two coat of Synthetic enamelled paint(Colour of paint as per approved by Engr-In-Charge/GE) over a Red Oxide Primer for steel items direected by Engineer-in-Charge/GE 3. Work will be executed where the furniture exist in different User Units of GE Sevoke Road including BSO's Furniture Yard as directed by Engineer-in-Charge/GE.

ALMIRAH MEDIUM STEEL ( FD-1032)

Removing old existing unsv handles from Almirah medium steel and S&F new CP steel handle of size 100mm to Almirah medium steel all as shown on drawing and as directed.

Removing old existing unsv lock from Almirah medium steel and S&F new lock 75mm long, 06 lever with two keys to Almirah medium steel all as shown on drawing and as directed.

Removing old existing unsv locking assembly from Almirah medium steel and S&F new locking assembly to Almirah medium steel including making adjustment of door shutter and applying one coat of synthetic enamel paint as approved over a coat of primer after preparation of steel surfaces complete with spray machine all as shown on drawing and as directed.

Removing old existing unsv leg from Almirah med steel and S&F new leg made out of 1mm thick CRCA sheet made to size and shape and welding at bottom of almirah after applying one coat of synthetic enamel paint over a coat of red-oxide primer duly preparation of steel surfaces complete. Painting shall be done with spray machine and all as specified on drawing and as directed .

Removing old existing unsv butt hinges of Almirah medium steel and S&F new butt hinges 75 mm long and adjusting door by revitting / welding complete all as shown on drawing and as directed.

M&L for refixing of loose shelves with mild steel revitting /spot welding complete all as directed.

S&F new locking device cover made of 1mm thick CRCA sheet duly painted with two coat of paint over a coat of red oxide primer as approved quality to Almirah large steel.

Removing old existing unsv shelves from Almirah large steel and S&F new shelves as per existing drg and all as specified on drawing and as directed by Engr-In-Charge.

CHAIR VARANDAH (FD-256)

Taking out old unsv Legs and S&F new Legs of 20 mm dia 1.6 mm thickness MS Conduit pipe as per Drg.

Taking out old unsv Frame and S&F new Frame of 20 mm dia 1.6 mm thickness MS Conduit pipe as per Drg.

Taking out old unsv stiffner and S&F new stiffner of 10 mm dia as per Drg.

Removing of old unsv cane and re-canning of chair Varandah with 4 mm cane as per mat Pattern of superior quality cane of width & thickness as mentioned in Drg. (Make of cane shall be Aryan/Shah/Binny/Premier)

Taking out old unsv PVC Shoe/Toes and S&F new PVC Shoe/ Toes as per Drg.

CHAIR VERANDAH ( FD/MAP-II/06)

Taking out old unsv Legs and S&F new Legs of 20 mm dia 1.6 mm thickness MS Conduit pipe as per Drg.

Taking out old unsv Frame and S&F new Frame of 20 mm dia 1.6 mm thickness MS Conduit pipe as per Drg.

Taking out old unsv stiffner and S&F new stiffner of 10 mm dia as per Drg.

Removing of old unsv PVC Seat and back from chair Varandah and S&F of new superior quality PVC Seat and Back after fixing 02 x MS Stifner in Seat & 01 x MS Stiffner in back for support of appropriate size . (Make Nilkamal / Amko /cello)

Taking out old unsv PVC Shoe/Toes and S&F new PVC Shoe/ Toes as per Drg.

TABLE OFFICE OFFICER STEEL :- (FD-1003)

Removing old existing unsv top from Table Office Officers steel and supply and fixing the new top of same size and shape made out of 18/19mm thick pre-laminated MDF board exterior grade provided with hard wood beading as existing and all as directed by Engr-in-charge/GE.

Removing old existing unsv lock from Table Office Officers steel and S&F new lock with two keys all as shown on drawing and as directed.

Removing old existing unsv drawer from Table Office Officers steel and supply and fixing the new drawer of same size and shape made out of 1mm thick CRCA sheet all as shown on drawing and applying one coat of synthetic enamel paint with spray painting (Internally and externally) over a coat of primer after preparation of surfaces complete all as specified and as directed by Engineer-in-Charge. Colour of paint as per direction of Engineer-In -Charge.

S & F in replacement 100mm long piece of 25 Sq mm MS tube having wall thickness of 1.6mm including welding to Table Office Officers complete all as directed by Engineer -in-Charge.

S&F in replacement PVC shoes to Table Office Officers steel complete all as shown on drg and as directed.

Welding to broken joints of Table office officer's steel with drawer all as directed .

TABLE OFFICE CLERK STEEL :- (FD-1004)

Removing old existing unsv top from Table Office clerk steel and supply and fixing the new top of same size and shape made out of 18/19mm thick pre-laminated MDF board Exterior grade provided with hard wood beading as existing and all as directed by Engr-in-charge.

Removing old existing unsv lock from Table Office clerk steel and supply and fixing new lock with two keys all as shown on drawing and as directed.

Removing old existing unsv drawer from Table Office clerk steel and supply and fixing the new drawer of same size and shape made out of 1mm thick CRCA sheet all as shown on drawing and applying one coat of synthetic enamel paint with spray painting (Internally and externally) over a coat of primer after preparation of surfaces complete all as specified and as directed by Engineer-in-Charge/GE. Colour as per direction of Engineer-In-Charge/GE.

S & F in replacement 100mm long piece of 25 Sq mm MS tube having wall thickness of 1.6mm including welding to Table Office Clerk steel complete all as directed by Engineer -in-Charge/GE.

S&F in replacement PVC shoes to Office clerk steel complete all as shown on drg and as directed.

Welding to broken joints of Table Office clerk steel with drawer all as directed .

TABLE 3'x 2' STEEL WITH DRAWER :- (FD-1008)

Removing old existing unsv top from Table 3'X2' steel with drawer and supply and fixing the new top of same size made out of 18/19mm thick pre-laminated MDF board Exterior grade provided with hardwood beading as existing and all as directed by Engr-in-charge.

Welding to broken joints of Table 3'X2' steel with drawer all as directed .

S&F in replacement PVC shoes to Table 3'X2' steel with drawer complete all as shown on drg and as directed.

S & F in replacement 100mm long piece of 25 Sq mm MS tube having wall thickness of 1.6mm including welding to Table 3'X2' steel with drawer complete all as directed by Engineer -in-Charge.

Removing old existing unsv lock from Table 3'X2' steel with drawer and supply and fixing new lock with two keys all as shown on drawing and as directed.

Removing old existing unsv drawer from Table 3'X2' steel with drawer and supply and fixing the new drawer of same size and shape made out of 1mm thick MS black sheet all as shown on drawing and applying one coat of synthetic enamel paint with spray painting (Internally and externally) over a coat of primer after preparation of surfaces complete all as specified and as directed by Engineer-in-Charge/GE.

TABLE 3'x 2' STEEL WITHOUT DRAWER :- (FD-1007)

Removing old existing unsv top from Table 3'X2' steel without drawer and supply and fixing the new top of same size made out of 18/19mm thick pre-laminated MDF board Exterior grade provided with hard wood beading as existing and all as directed by Engr-in-charge.

Welding to broken joints of Table 3'X2' steel without drawer all as directed .

S&F in replacement PVC shoes to Table 3'X2' steel without drawer complete all as shown on drg and as directed.

S & F in replacement 100mm long piece of 25 Sq mm MS tube having wall thickness of 1.6mm including welding to Table 3'X2' steel without drawer complete all as directed by Engineer -in-Charge.

CHARPOY IP HARD TOP . (FD/MAP-II/01)

Removing old existing unsv Plytop from Charpoy IP hard top and S&F of new 12mm thick plytop of suitable size, ISI marked, BWR Grade commercial plywood of unpolished edging of approved quality all as shown on drawing and as directed. (Make of Plywood : Kitply(Vista)/Century/Greenply/National plywood/Archid ply(Gold)).

S&F in replacement hard rubber shoes at the bottom of leg all as shown on drg.

Welding to broken joints/ fixing bt nut bolts of bed hard steel all as directed .

BED HARD STEEL (FD/E6/MAP/08 (R)

Removing old existing unsv Plytop from Bed Hard and S&F of new 12mm thick plytop of siutable size, ISI marked, BWR Grade commercial plywood of unpolished edging of approved quality all as shown on drawing and as directed. (Make of Plywood : Kitply(Vista)/Century/Greenply/National plywood/Archid ply(Gold)).

Removing old existing unsv board from head board and S&F new board made of 18 mm thick prelaminated particle board both side teak faced having 04 mm thick teak wood beading all around. All as per size and design shown on drawing and as directed.

All as per Sr.item No. 10.02 here-in-before but foot board.

S&F in replacement hard rubber shoes at the bottom of leg all as shown on drg.

Welding to broken joints/ fixing bt nut bolts of bed hard steel all as directed .

CHARPOY GI PIPE WITH 12MM HARD PLYTOP (FD-220)

Removing old existing unsv Plytop from Charpoy and S&F of new 12mm thick plytop of siutable size, ISI marked, BWR Grade commercial plywood of unpolished edging of approved quality all as shown on drawing and as directed. Fixing of 03 x ISI specified MS iron strip of 5mm thickness x 50mm width duly welded at equal distance across the long rail for fixing of plywood (Make of Plywood : Kitply(Vista)/Century/Greenply/National plywood/Archid ply(Gold).

Removing old existing unsv long rails and S&F new long rail as per existing shape and size as per drg.

Conversion of short rails obtained from ser No 11.02 above into short rails as per existing shape and size as per drg.

Conversion of short rails obtained from ser No 11.03 above into legs as per existing shape and size as per drg.

Nut & bolts as per existing shape and size and as per drg.

Washers as per existing shape and size and as per drg.

GI elbow 3 way 32mm dia as per existing shape and size and as per drg.

CHAIR WRITING ( FD/MAP-II/12)

Replacement of old unserviceable seat and back of chair with new seat of 12mm thick plywood commercial quality (ISI marked) covered with 75mm thick U foam and best quality of tapestry cloth. The back shall be 6mm thick plywood commercial quality (ISI marked) fixed on frame alround with PVC beading and back support with screwes and covered with 40mm thick U foam over shape and best quality of tapestry cloth. Seat and back fixed on frame with screw and including all minor repairs and welding etc complete all as specified and as directed by Engineer-in-Charge. (Note :- The tapestry cloth to be provided as per sample kept at GE office and as approved by GE.)

Replacement of unserviceable handle of Chair writing & S&F new handle best quality as approved by GE/Engr-In-Charge as appropriate size as shown drg and directed.

LOCKER STEEL (FD-1029)

Replacement of of unsv Handle and S&F New Handle including Nut and Bolt with Washer complete as per existing shape ,size and as per Drg.

Replacement of unsv Butt Hinges and S&F New Butt Hinges complete as per existing shape ,size and as per Drg.

Replacement of unsv Hasp and Staple and S&F New hasp and staples complete as per existing shape ,size and as per Drg.

Replacement of unsv Hanging Rod of conduit Pipe and S&F New Hanging Rod with bracket complete as per existing shape,size and as per Drg.

Replacement of unsv /Rusted Shelves of Locker Bed side steel and S&F New Shelves dully Painted complete as per existing shape ,size and as per Drg.

Adjustment of existing shelves by providing New clamps/clips after removing the old unsv clamps/clips as per existing shape,size and as per drg.

CHAIR CB STEEL TUBULAR WITH ARMS ( FD-75(M)

Taking out unsv seat & back and S&F new seat & back after fixing 2 x MS Stiffner (Each Seat &Back) & 12mm commercial plywood fixing in seat & back with 75 MM thick cushion 40 Density and covered with leatherite cover for both seat & back and as per directed by GE/Engr-In-Charge.

Taking out old unsv wooden handle and S&F new wooden handle made out of well seasoned teakwood including two coat of french polish with glossy finish as appropriate size

Taking out old unsv PVC Cap/Shoe and S&F new PVC Cap/Shoe as per Drg.

Welding to broken joints/ fixing all as directed by GE/Engr-In-Charge.

CHAIR CB STEEL TUBULAR WITHOUT ARMS FD-75(M)

Taking out unsv seat & back and S&F new seat & back after fixing 2 x MS Stiffner (Each Seat &Back) & 12mm commercial plywood fixing in seat & back with 75 MM thick cushion 40 Density and covered with leatherite cover for both seat & back and as per directed by GE/Engr-In-Charge.

Taking out old unsv PVC Cap/Shoe and S&F new PVC Cap/Shoe as per Drg.

Welding to broken joints/ fixing all as directed by GE/Engr-In-Charge.

CHAIR SCHOOL WITH HANDBOARD FD/E6/MAP/05

Removing old existing unsv seat chair and S & F new seat (Make : Nilkamal/Cello/Amko) as per shape and size complete all as specified and directed.

Removing old existing unsv hand board of chair and S & F new hand board made out of 19MM thick prelaminated MDF board with steel frame as per shape and size complete all as specified and directed.

Removing old existing unsv jali of chair and S & F new jali as per shape and size complete all as specified and directed.

Taking out old unsv PVC Cap/Shoe and S&F new PVC Cap/Shoe as per Drg.

TABLE BED SIDE STEEL FD/E6/MAP/15 (R)

Removing old existing unsv top of table bed side and S & F new top made out of 19MM thick prelaminated MDF board alround the PVC beading as per shape and size complete all as specified and directed.

Removing old existing unsv sides of table bed side and S & F new sides made out of 19MM thick prelaminated MDF board as per shape and size complete all as specified and directed.

Removing old existing unsv drawers of table bed side and S & F new drawers made out of 19MM thick prelaminated MDF board in same colour of previous and 2 x telescopic channel provided in each drawer as per shape and size complete all as specified and directed.

Removing old existing unsv handles of table bed side and S & F new chromium plated SS handles approves by GE/Engr-In-Charge as per shape and size complete all as specified and directed.

Taking out old unsv PVC Shoe and S&F new PVC Shoe as per Drg.

PAINTING :- M&L for two coat of paint by means of spray painting machine with synthetic enamelled paint of appropriate shade as decided by Engr-In-Charge/GE and quality to steel furniture items (internally & externally complete) including removing of dents & filling with putty after preparation of surfaces thoroughly by using appropriate abrasive cloth emery 1 grinder machine as required as trade practice complete all as specified and as directed by Engineer-in-Charge to the following steel furniture items :-

Almirah Large Steel. FD-1031,FD-67(M)

Almirah Medium Steel. FD-679M), 1032

Chair Varandah. FD-256

Chair Varandah. FD/MAP-II/06

Tabel 3'x2' with drawer steel. FD-1008

Tabel 3'x2' without drawer steel. FD-1007

Bed Hard Steel FD/E6/MAP/08 (R)

Table Office Officer's Steel. FD-1003

Table Office Clerk Steel. FD-1004

Locker Steel. FD-1029

Chair CB Steel Tubular with arms. FD- 75(M)

Chair CB Steel Tubular without arms. FD- 75(M)

Table Bed Side . FD/E6/MAP/15 (R)

Chair School with handboard . FD/E6/MAP/05

Chair writing. FD/E6/MAP-II/12

Charpoy IP Hard Top. FD/MAP-II/01

M/S HARMANS (BID ID -3110902)

J.S.M. FURNITURE (BID ID -3111902)