Improvements and Strengthening of offtake point / Supply Channel of Bringi Canal Old and Allied network at spots and other infrastructure of Divisional Building Anantnag

Amount

Earth work

Earth work in excavation by mechanical means over areas (Exceeding 30cm in depth, 1.5 Mtr in width as well as 10 Sqm on plan) including disposal of excavated earth, lead upto 25m and lift upto 1.50 m, disposed earth to be levelled and neatly dressed. All kinds of soil

Earth work in rough excavation, banking excavated earth in layers not exceeding 20 cm in depth, breaking clods, watering, rolling each layer with 1/2 tonne roller or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depressions, lead upto 50 m and lift upto 1.5 m in all kinds of soil:

Dry stone Pitching :-Horizontal Pitching

Side Slopes

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Hand-packing stones in wire-crates; excluding cost of stones and crates

supply and fixing of 4mm dia B.A wire woven crates (4"x4" mesh) as per ISI specification with lid /binding wire.including all carriages ( manual /Mechanical) up to site of work complete Job

Providing and Fixing plane Lining tongued and Grooved 12mm thick wooden panelling , fixed in position on Batten strips of 12mm plyboard base, including wooden plugs all complete with necessary screws;

Electric Fittings

Lighting Point :- One lighting shall incl. wiring for lighting points in 1.5 sqm PVC insulated copper wire & 2.5 sqm PVC insulated multi strand copper wire lighting sub mains 6 Amp one way switch 2 mm thick PVC conduit/channel with bends junction boxes etc 6 Amp S.pole MCB , 10 Amp DP MCP 2 way DB for housing MCB and Hylem sheet with wooden box recessed in walls with accessories.

Heating point :- one heating point shall incl. wiring for heating points in 2.5 sqm PVC insulated multi strand copper wire & 4 Sqm PVC insulated multi-strand copper wire for heating sub mains 16 Amp switch socket combined 2 mm thick PVC conduit /channel with bends junction boxes etc . 10 Amp s Pole MCB, 2 way DB for housing MCB and Hylem Sgheet and wooden box recessed in walls with accessories.

Fan points :-One fan point shall incl. writing for lighting points in 1.5 sqm PVC insulated multi strand copper wire 1200mm ceiling fan /225 mm exhaust fan with ceiling roses & PVC square block , 350 watts electronic fan dimmer , 2 mm thick PVC conduit /channel with bends junction boxex etc, 6 Amp S pole MCB , 10 Amp DP MCB , 2 way DB for housing MCB for lighting circuit and hylem sheet with wooden box recessed in walls with accessories.

Providing and fixing in position tongued and grooved high density laminated flooring 8mm, including all fixers with all carriages complete job.

French spirit Polishing two or more coats on new works including a coat of wood filler .

Providing and fixing wooden moulded corner beading of size 50x50 mm (base and height) of triangular shape to the junction of paneling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete 2nd kail wood

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10 mm to 25 mm;

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing 50mm thick.

12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand)

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. colour such as White, Ivory, Grey, Fume Red Brown

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid , 10 liter low level white vitreous china flushing cistern and CP flush bend with fittings and C.I. brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid.

Providing and fixing of stainless steel sink of approved brand with necessary fittings 470 x420 mm

Providing and fixing brass bib cock of approved quality. 15 mm nominal bore.

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms.

Mirror of superior make glass 60x45 cm each

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc 25mm dia.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc 15mm dia.

Providing and fixing of 4-inch dia Prince pipe for sanitary fittings.

Carriage of materials from source to Road site of work by M.T. and 50 Mtrs By H.L

Aggregates from source to site of work average 30 kms by MT and Head Load 50mts.

Sand from source to site of work average 45 Kms by MT and Head Load 50mts.

Cement from Divisional store to site of work average 30 Kms by MT and Head Load 50mts.

Stones from source to site of work by H/l average lead 100mts from different pockets of nallah.