Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹43.5 LAccepted-AOC PO CHANDL PS BISHNUPUR DIST SOUTH 24 PGS PIN 743503 | 24 PARAGANAS SOUTH | WEST BENGAL | 743503 | L1 | Accepted-AOC Being lowest bidder and reasonable | |
| 2 | L2₹45.2 L+₹1.3 L (2.93%)Rejected-Finance TIORKHALI MAHESHGANJ NADIA | NADIA | NADIA | WEST BENGAL | 790804 | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹46.5 L+₹2.6 L (6.01%)Rejected-Finance 0 HISAR HISAR HARYANA 125004 UDYAM HR 06 0052049 | HISAR | HARYANA | 125004 | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹46.7 L+₹2.9 L (6.51%)Rejected-Finance G C ROAD ABDUL LATIF ROAD PO TITAGARH P S RAHARA KOLKATA 700 119 | 24 PARAGANAS NORTH | WEST BENGAL | 700119 | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹47.1 L+₹3.2 L (7.25%)Rejected-Finance B4 60 1 NEW SANTOSHPUR THANDER PARA STATION ROAD 24 PARGANAS SOUTH PIN 700142 WB | 24 PARAGANAS SOUTH | WEST BENGAL | 700142 | L5 | Rejected-Finance Other than lowest |
Tender Value
₹41 L
EMD Value
₹82,000
Closing Date
15 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(FW) Kolkata
D9 Commissariat Road Hastings Kolkata 700022
SPL REPAIR TO ROOF SURFACE, JOINERY AND CONNECTED WORKS IN COMMAND MANDIR AND GURUDWARA INSIDE FORT WILLIAM KOLKATA
2023_MES_596291_1
8108/E8
Open Tender
Civil Works
Item Rate
180 days
GE(FW) Kolkata
Ref tender document
7 documents required · 7 mandatory
₹500
GE(FW) Kolkata
₹82,000
Yes
11 Jul 2023
18 May 2023
16 Jun 2023
18 May 2023
15 Jun 2023
1 Jun 2023
Amount
Demolition of cement concrete (un-reinforced) of any description in any position not otherwise specially provided for complete all as specified and as directed..
Demoltion of reinforced cement concrete roofs , floors. (other than gound floor) beams, staircase, landings, chajjas and similar suspended works etc complete all as specified and directed.
Dismantling stone slabs and tiles, laid, bedded and pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and directed.
Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as a specified and as directed
Dismantling of Asbestos cement corrugated, semi-corrugated sheet in roof covering complete all as a specified and as directed
Dismantling of plain or corrugated steel sheeting any gauge or any thickness in roof covering including stacking serviceable materials of re-use and removing unserviceable materials complete all as specified and directed.
Demolition of brick work built in cement mortar including all quions arches pillars etc but excluding ashlars facing,dressed stone work and precast concrete articles complete all as directed.
Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key and scrubbing down with water complete All as specified and as directed.
Dismantling of floor, hearth or wall tiling incl cement mortar bedding (but not backing) removing tiles from site and rubbish off the premises complete all as specified and directed.
Taking down chowkhat or frames with shutters (without taking off shutters from the frame) area n.exc. 1.5 Sqm each all as directed.
Taking down chowkhat or frames with shutters (without taking off shutters from the frame) area exc 1.5 Sqm and n.exc.4.00 Sqm each wooden all as directed.
S&F factory made uPVC- Sliding windows/doors having two tracks and two sashes (shutters) glazed alongwith one stainless steel mesh shutter with frame dimension of 58mm x 49mm and sash dimension of 61mm x 47mm x 37mm with corners fusion welded, fully reinforced with Galvanized steel of 1.2 mm.The physical properties of the profiles like Vicat softening temperature, density, tensile strength, hardness, weather ability, impact strength and Modulus of Elasticity should be tested in accordance with ASTM/DIN-ISO standards and the thermal conductivity as per IS standards. The profile manufacturer shall have extrusion facility in India and the windows to be assembled and installed by an authorised fabrication partner . The windows must be installed complete with all kinds of iron mongery in Ist quality (including EPDM gaskets, bridging wedges and glass packers) and with suitable water draining system. Application of Silicon sealant from Inside / Outside of Dowcorning / GE or equivalent. The profiles shall have a warranty of 20 years. The profiles shall conform to BSI Quality Management System ISO 9001-2015 and Environmental Management System ISO 14001-2015 and cost of scaffolding if required for fixing shall deemed to be included in the quoted rate complete all as specified and directed. Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.
S&F Pressed steel door frame of size 105 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock stroke plate,etc., complete all as specified and as directed.
S&F PVC solid door frame of size 50 x 47 mm made out of 5 mm thick prelaminated single side PVC sheet reinforced with MS square tube complete all as specified and as directed.
Providing and fixing Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)
S&F for Factory made solid PVC moulded door shutter, 28 to 30 m thick(stiles) with 2,4 or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face & 2 mm plain colour PVC sheet on back face with particle board core complete all as specified and directed.
S&F 150mm aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.
S&F 250mm aluminium, anodised sliding door bolt with hasp, staple(bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy all as directed complete all as specified and directed.
S&F 100mm butt hinges cold rolled stainless steel medium weigh,t complete all as specified and directed.
S&F aluminium handle, cast type anodised 150mm size complete all as specified and directed.
S&F 5mm thick toughened glass as in hinge doors, partitions, windows, automatic doors and similar works including cutting to shape, drilling holes as required complete all as specified and as directed by Engineer-in-Charge.
S&F 0.50 mm thick TCT (total coated thickness) pre-coloured galvalume sheets with minimum base metal thickness of 0.45 mm, single skin high rib/multi rib profile galvalume sheeting having 1000-1020 mm width and 28-30 mm high crest @ maximum 250-255 mm pitch (centre) with sheets manufactured out of 0.50 mm this TCT (total coated thickness) high tensile galvalume sheets having tensile strength 550 MPA with 18-20 micron top coat over 5 micron primer and 8-10 micron alkyld backer zinc aluminium alloy AZ-150, sheets having a dip metallic zinc (43.5%0 aluminium (55%) & silicon (1.5%) with total mass coating of 150 gms/sqm on both sides, having wide pans with minimum 3 small stiffening ribs for effective water shedding and special male/female ends with full return legs on laps for purlin support and fixed as per existing profile of roof complete all as specified and directed.
All as per item No.22 above, but 0.50 mm thick coloured plain galvalume sheet as in ridge/valley gutter of roof.
Supply and fix 0.80 mm thick plain galvanised mild steel sheeting, as in hips, valley gutter, drip and straight flashings ( length and girth as fixed) for hangers etc., as in repairs, complete all as specified and directed.
S&F in repair 2mm thick fibre glass reinforced transluent corrugated or plain coloured/printed sheeting with two corugation side lap fixed with coach screw and washer in roof, wall etc complete all as specified and directed.
M&L for cement concrete (1:2:4) type B1, using 20 mm graded stone aggregate, as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating and necessary formwork complete all as specified and directed.
M&L brick work with sub class'B' fly-ash bricks, straight or curved on plan exc 6m radius buit in cement mortar 1:6 complete all as a specified and as directed.
M&L for brick work with fly ash brick straight or cuved on plan to any radius in half bricks thick walls, built in 1:4 cement mortar complete all as directed.
M & L for cutting holes in brick walls in cement mortar for inserting holdfast or pipes and making good dismentled portion in cement mortar 1:3 or cement concrete 1:2:4 type-B1 as required, exc half brick but not exc one brick etc., complete all as specified and directed.
M&L for dubbing out cement plaster (1:4), average 10 mm thick on irregular faces of walls (when specially ordered in writing) complete all as a specified and as directed
M&L rendering 15mm thick on fair faces of brick work/concrete surface in CM 1:6, finished fair & even & smooth without using extra cement & including applying water proofing smart care damp block compound 2K of Make Asian paint as per manufacturer instruction including scaffolding in any position or equivalent in other makes, all as specified and directed.
M&L rendering 15mm thick on fair faces of brick work/concrete surfaces in CM 1:4 finished fair & even & smooth without using extra cement & including applying water proofing smart care damp block compound 2K of Make Asian paint as per manufacturer instruction including scaffolding in any position or equivalent in other makes, all as specified and directed.
M&L 10mm thick rendering on ceiling surfaces in cement mortar 1:3 , finishing even and smooth without using extra cement including necessary scaffolding complete all as a specified and as directed
M&L for 100mm thick PCC (1:4:8) type 'D-2' (using 40mm graded crushed stone aggregate) as in sub base of concrete finished even and fair cement complete all as directed..
M&L for 18-20mm thick granite slab of approval quality (table subbed and polished) in steps, jambs, pillars, windows cills, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete including moulding of edges complete, all as specified as directed.
M&L for pre-polished chequered cement concrete tiles (coloured) of size 30cmx30cmx25mm thick, set, , jointed and pointed in neat cement slurry in floor and pointed with white/coloured cement &pigment to match the surface laid over and including 20mm thick screed bed in cement mortar 1:4 complete all as specified and directed .
M&L for 25mm thick PCC (1:2:4) type 'B-1' (using 20mm graded crushed stone aggregate) as in floor finished fair and even, complete all as a specified and as directed
M&L Non Skid joint free coloured degital tiles 7-8mm thick area of each tiles exc 0.06 Sqm but n. exc 0.11 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and incl 15mm thick screed bedding in cement mortar 1:4 complete all as a specified and as directed
M&L coloured glazed ceramic tiles in vertical surfaces 450X300X7-8mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match, fixed over and incl 10mm thick rendering in cement mortar 1:3 complete all as specified and directed.
Removal of existing water proof treatment of any description from roof surface including cement plaster/screed bed carefully from the surfaces, roughening concrete surfaces and cleaning the roof surfaces by brushing, sweeping and scrubbing down with water and removal of debris complete all as specified and as directed.
M&L for brushing cement slurry @ 2.75 Kg/sqm over cleaned roof surface prior to application of concrete complete all as directed by Engineer - in - charge .
M&L for Cement Concrete, Type B-0, 1:2:4 (using 12.50 mm graded Stone aggregate), thickness as required at site, as in roof padding, finished even and fair complete all as specified and directed.
M&L 15 mm thick screed bed in cement mortar 1:3 over roof mixed with water proofing compound as per manufacturer's instruction complete all as specified and directed. (NOTE: WPC will be measured and paid separately)
Supply only liquid water proofing compound all as specified and as directed.
M&L for water proofing treatment on existing cleaned RCC roof with the following specifications and manufacturer's instruction complete all as specified and directed :- (i) Preparing and cleaning of fully dried surfaces as per IS 3067-1966. (ii) Applying bitumen primer conforming to IS:3384-1968 over the cleaned base @ 0.50 litre per sqm. (iii) Providing a layer of 3 mm thick APP modified pre-fabricated five layer, weight not less than 3.6 kg/sqm, black finished reinforced with non-woven polyster matt membrane with butane torch application. Overlap shall be minimum 100 mm on the transverse direction and 75 mm on longitudinal direction. (iv) Applying two coats of bitumen based UV reflective paint with aluminium finish @ 0.20 litre per sqm over APP membrane. (v) Sealing of all angles & abutments upstands with extra care to ensure perfect bondage. Sealing of edges well into grooves & protect the seal with a polysulphide/polyurethane sealant.
M&L for cutting Grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 or cement concrete 1:2:4 type-B1 as required complete all as specified and directed.
M&L bituminous gola, with 80/25 bitumen and coarse sand mixture, 1:3 by weight, 8cmx8cm at the junction of roofing to vertical surfaces, all as specified and directed.
S&F for Framed work such as grills, gratings etc, with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0, and for portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc.all as specified and directed.
M&L for Rolled mild steel sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Gde Fe-410-W (Gde-E 250) quality-B complete all as specified and directed. (NOTE: Quoted rates shall be deemed to include for cutting to dead length where required, notching, drilling, fitting, riveting and/or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing and fitting angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing complete)
Supply and fixing mild steel wind ties for roof including securing bolts complete all as specified. (NOTE: Measurement shall be taken for the MS flat only. Quoted rate is deemed to include for the cost of securing bolts etc)
M&L welded steel wire fabric, weight n exc 4 kg per square meter complete , fixed to steel members, all as specified and directed.
M&L for mild steel TMT Bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including Mild Steel Wire (annealed) not less than 0.90 mm or securing with clips, etc., complete all as specified and as directed.
M&L for mild steel TMT bars 5 mm dia and over upto and including 10 mm dia in stirrups , spacers and binders cut to length , bent to shape required as in reinforcement and binding with MS wire (annealed) not less than 0.90 mm dia complete all as specified and directed .
Use and waste for Formwork to sides and soffits of floor or roof beams, beam haunching's, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for rough finished surfaces of concrete flat, complete all as specified and directed.
M&L for nominal mix RCC (1:1½:3), type A-1 (using 20mm graded stone aggregate) as in beams, cantilevers, bressumbers, lintels, over 1.50m span etc., complete all as specified and as directed.
Chipping of unsound /weak concrete materials including cover plaster from RCC structural member i.e. slabs, beams, columns, lintel, chajja, fins, facia etc. of 50 mm average thickness (Any storey/ height of building/ structure) including tapering all edges, making square shoulders of cavities by air or sand blasting etc and cleaning of exposed concrete surface and reinforcement bars, lightly picking materials by air blasting or sand blasting including removal of foreign materials, loose concrete/aggregate etc and disposal of all debris out side of MOD land and complete all as specified and as directed. (NOTE: Measurement shall be considered for the surface area of RCC member)
M&L for applying chloride free rust removing chemical on rusting steel reinforcement bar as per manufacturer's specification and removing all rust from steel reinforcement bar by wire brush & sand/emery paper (after 24 hours of application of rust remover) and cleaning the area thoroughly by water with the help of pressure jet and allowing it to dry and making the reinforcement bar totally rust free (for any storey/ height of building/ structure) complete all as specified and as directed. (Make of Rust removing chemical :- Reebaklens RR of FOSROC or equivalent product other makes specified in tender) (NOTE: Surface area of cleaned steel reinforcement shall be measured for payment)
M&L for introducing new mild steel TMT reinforcement bars for structural connection in RCC beams, columns, lintel and slabs (for any storey/ height of building/ structure) including power drilling holes of appropriate diameters in reinforced or plain cement concrete to a minimum depth of 150mm and up to 200mm including power drilling, fixing the reinforcement in position using epoxy, cleaning of loose dust by blowing air, sealing with epoxy cartridges, plastic nozzles etc as per manufacturer's instructions etc all as specified and directed. (Make of epoxy chemical : Lockfix E75 of FOSROC / Hilti HY 150 or equivalent product other makes specified in tender) (NOTE: Reinforcement bars shall be paid seperately)
M&L for preparation of old existing corroded and new introduced reinforcement surface (at any storey/ height of building/ structure) by brush and application of two component epoxy based zinc rich primer, of minimum specific gravity 1.75, adhesive bond strength with steel as 1.50N/mm2, as a protective coating to steel reinforcement bars in concrete with total zinc content in dry film >90% by volume and DFT per coat >50 microns complete all as specified and directed. (Make- Nitozinc primer of FOSROC or equivalent product in other makes specified in tender) (NOTE: Surface area of steel reinforcement shall be measured for payment)
M&L for applying a coat of epoxy bonding agent on existing concrete surfaces, with mixed density 1.48 Kg/litreand adhjesive bond strength>2.50 MPs, mixed and applied as per manufacturer's specifications complete all as specified and directed. (Make- Nitobond EP of FOSROC or equivalent product in other makes specified in tender) (NOTE: Measurement shall be considered for the surface area of RCC member.
M&L for applying shrinkage controlled, polymer modified, fibre reinforced cementitious repair mortar, as per manufacturers instructions to get a compressive strength of 35 MPA after 28 days, finishing surfaces even and smooth complete all as specified and directed. (Make- Rendroc SP 40 of FOSROC or equivalent product in other makes specified in tender) (NOTE: Measurement shall be considered for the surface area of RCC member.
Dismantling carefully serviceable/unserviceable ceiling board incl snap grid frame of any thickness including cover fillets at any height, complete all as specified and directed.
S&F False ceiling with 'E' board "Classic", reinforced, designer series, board with HPSC of size 600 mm x 600 mm x 4 mm thick fixed on powder coated aluminium snap grid to support the boards/files with powder coated aluminium anodised main 'T' section 36mm x 25mm x 1.40mm, cross tee 23.50mm x 23.50mm x 1.40mm thick and aluminium angle 25mm x 25mm x 1.40mm as on edges/sides, fixed to ceiling with hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified and as directed. (NOTE: Quoted rate shall be deemed to be inclusive of the cost of ceiling board)
All as per item No 63.00 above, but fixing only false ceiling (aluminium snap grid sections obtained from above and provision of new ceiling boards ceiling boards ), complete all as specified and as directed. (NOTE: Quoted rate shall be deemed to be inclusive provosion of new ceiling board)
S&F in repair false ceiling with 'E' board "Classic", reinforced, designer series, board with HPSC of size 600 mm x 600 mm x 4 mm thick fixed on aluminium snap grid to support the boards/files with aluminium anodised main 'T' section 36mm x 25mm x 1.40mm cross tee 23.50mm x 23.50mm x 1.40mm thick and aluminium angle 25mm x 25mm x 1.40mm as on edges/sides, fixed to ceiling with hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long and applying one coat of acrylic distemper over a coat of primer on exposed surfaces complete all as specified and as directed. (NOTE: Quoted rate shall be deemed to be inclusive of the cost of ceiling board)
S&F in repair 'E' board "Classic", reinforced, designer series, ceiling board with HPSC of size 600 mm x 600 mm x 4 mm thick fixed on existing snap grid system and applying one coat of acrylic distemper over a coat of primer on exposed surfaces complete all as specified and as directed.
S&F in repair Chromium plated brass Bib cock with wall flange (premium range), fancy type, long body, fixed to 15 mm bore of Iron pipe complete all as specified and directed. (Make : JAQUAR, Cat No: ARI-39037/ CERA, Cat No: F1005151 / ASIAN PAINTS, Cat No: MYBC101 / PRAYAG, Cat No: 8108 / HINDWARE, Cat No: F390003 / PARRYWARE, Cat No: G1434A1)
S&F in repair 15mm bore chromium plated two way bib cock with flange (premium range), fancy type complete all as specified and as directed. (Make : JAQUAR, Cat No: CON-041KN / CERA, Cat No: F1005161 / ASIAN PAINTS, Cat No: MYBC102 / PRAYAG, Cat No: 8111 / HINDWARE, Cat No: F390004 / PARRYWARE, Cat No: G1434A1)
S&F in repair, 15 mm bore fancy type stop valves, cast copper alloy, chromium plated (concealed type), screwed down, high pressure, with crutch or butterfly handle, incl concealed body, screwed both ends for iron pipe or for unions and, complete all as specified and directed. (MAKE :Essco, Cat No: SQT-514AN / Ess Ess, Cat No: T-332B / PRAYAG, Cat No :7218 / SOMANY, Model: ETHER)
S&F toilet paper holder, surface type with flap incl taking down existing holder complete all as specified and directed. (Make : JAQUAR, Cat No : ACN-1153N / CERA, Cat No: F5007110 / PRAYAG, Cat No: BA-08 / HINDWARE, Cat No: F880003 / PARRYWARE, Cat No: T6514A1)
S&F in repair angle valve, 15 mm bore, cast copper alloy, chromium plated fancy type, concealed type with wall flange fixed to iron pipe complete all as specified and directed. (Make : PARRYWARE, Cat No: G4807A1 / JAQUAR, Cat No: FUS-29053 / CERA, Cat No: F1015361 / ASIAN PAINTS, ALAC101 / HINDWARE, Cat No: F390005 / PRAYAG, Cat No: 9010)
S&F in repair chromium plated Hand shower (health faucet), ABS body (premium range) with 1.2 metre long flexible tube in chrome finish with wall hook complete all as specified and directed. (MAKE : JAQUAR, Cat No: PRS-031/ CERA, Cat No: F8030401AB / ASIAN PAINTS, Cat No: C-232N / HINDWARE, Cat No: F160013 / PARRYWARE, Cat No: E8352A1)
S&F Chromium plated brass self closing pillar tap (premium quality), fancy type. with aerator, fixed to wash hand basin, as in repairs, complete all as specified and directed. (Make : JAQUAR, Cat No: OPP-15001PM / CERA, Cat No: F1005101/ ASIAN PAINTS, Cat No: SRPC101 / HINDWARE, Cat No: F360001 / PRAYAG, Cat No: 8102 or equivalent model in PARRYWARE)
S&F in repairs, Tubular towel rail (normal range), 20mm dia, 600 mm long between flanges incl brass chromium plated, complete all as specified and directed. (MAKE : Essco, Cat No : AEC-1111 / PRAYAG, CaT No: BA-40 / ESS ESS, Cat No : AC-701 / SOMANY, Model: ETHER)
S&F in repair 32 mm bore PVC corrugated waste pipe, 800 mm long for wash hand basins, sinks etc complete all as specified and directed. (Make: PRAYAG, Cat No: 327 or equivalent make as spproved by GE)
S&F CP grating 102mm size fixed with white cemnt complete all as directed. (Make : PRAYAG, Cat No : FT-04 or equivalent make as approved by GE)
S&F Glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket gaurd and railing 60cm long,(As per samle as approved by GE) as in repairs, complete all as specified and directed.
S&F Low density polythelene pipe connection, comprising of 15 mm dia 450 mm long having PTMT union at each end complete all as specified and directed. (MAKE : PRAYAG, Cat No. 323 / POLYTUF, Cat No. 4003 / ESS ESS, Cat No: B2CH118 or equivalent model in SHAKTI / JEXON)
S&F in repair coloured (any) PVC seat cover for EWC of any description with MS CP or aluminium hinging device complete all as specified and directed.
All as per item No.80 above, but white seat cover for EWC
S&F in repair White PVC Flushing Cistern 10 Litre capacity, Low Level Valve Less, Syphonic Action type with Inlet, Ball Valve, Float, flush pipe and Handle including Cutting and pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3 and fixed including taking down/out unserviceable Flushing Cistern and connected items complete all as specified and directed. (MAKE : PARRYWARE, Model : Slim line Economy / HINDWARE, Model : Sleek Plus / CERA, Model : Corona / PRAYAG, Model: SMART or equivalent model in COMMANDER )
S&F in repairs vitreous china (coloured) wash down water closet pan (pedestal pattern) with 'P' or 'S' trap front or back inlet, fixing bolts (except flushing cistern and flush pipe) incl plastic water closet seat cover (white) and mild steel chromium plated or aluminium hinging device complete all as specified and directed. (Make : Parryware, Model : Elite / JAQUAR, Model: Continental / CERA, Model: Conventional / HINDWARE, Model: SLICK)
S&F in repair Vitreous China Wash Hand Basin 550x400mm in size, White (Flat Back or Angle Back Type) with 32mm dia Brass Chromium Plated Waste Fitting, making good disturbed Surfaces in Cement Mortar 1:3 including taking down/out unserviceable Wash Hand Basin and connected Items, complete all as specified and directed. (Make of WHB : PARRYWARE, Model: FLAIR / HINDWARE, Model: MARIO / JAQUAR, Model: CONTINENTAL / CERA, Model: CLAIR) (NOTE: Waste coupling and Waste pipe shall be measured and paid seperately)
S&F Steel water tubes 15mm bore medium grade galvanised with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.
All as per item No 85 here-in-before, but 20 mm bore
Taking down and re-fixing old steel tubing 15mm bore and connection in new or old position(wall, ceiling, floor etc.) complete all as specified and directed.
All as per item No 87 here-in-before, but 20 mm bore
Dismantling of cast iron or reinforced concrete drain pipes, 100 mm bore, jointed in cement mortar and taking out of trenches, complete all as specified and directed.
Dismantling of cast iron or reinforced concrete drain pipes, 150 mm bore, jointed in cement mortar and taking out of trenches, complete all as specified and directed.
S&F Cast iron (sand cast) soil, waste and vent pipes 100 mm bore of any length with or without ears with cement joints, laid in trenches or in floors complete all as specified and directed.
All as per item No.91 above, but pipes fixed on walls
S&F Cast iron (sand cast) soil, waste and vent pipes 150 mm bore of any length with or without ears with cement joints, fixed on walls, complete all as specified and directed.
S&F CI bends for 100mm pipe (any radius) diminishing piece or tapers (large bore measured) complete all as specified and directed.
S&F CI bends for 150mm pipe (any radius) diminishing piece or tapers (large bore measured) complete all as specified and directed.
S & F 100 mm bore cast iron (sand cast) bends with access door (any radius), diminishing pieces or tapers (larger bore to be measured) complete all as specified and as directed by the Engineer-in-Charge.
S&F CI branch pieces, single (equal or unequal) ordinary or inverted (spigot or socket type) or with parellel branches, for 100mm dia pipe complete all as specified and directed.
S & F CI (sand cast) sanitary connection socket tofit WC outlet for 100 mm bore pipe, complete all as specified and directed.
S & F 150mm dia CI (sand cast) Branch pieces with or without ears, complete all as specified and directed.
M&L for Stack clamps made out of 50mm x 5mm flat iron and 16mm dia round iron stay, including bolts and nuts and securing ends of stays to wall or roof for 100mm dia CI pipe, complete all as specified and directed.
M&L for Stack clamps made out of 50mm x 5mm flat iron and 16mm dia round iron stay, including bolts and nuts and securing ends of stays to wall or roof for 150mm dia CI pipe, complete all as specified and directed.
S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed.
S&F 110mm bore PVC (SWR) bends any radius complete all as specified and directed.
M&L for preparation of old decorated surfaces of walls including preparation surfaces (by brooming down steel wire brushing scrapping down smoke soot, moulds, moss, effoloresent, salts trading oil and greasy spots etc) and applying one coat of acrylic distemper, finished with rollers, complete all as specified and directed.
All as per item No.104 above, but on ceilings
M&L for preparation of of new plastered surfaces of walls and applying two coats of acrylic distemper, finished with rollers over a coat of alkali resistant primer applied over 3.0 mm thick wall putty complete all as specified and directed.
All as per item No.106 above, but on ceilings
M&L for complete removal of existing treatment of wall surfaces and applying two coats of acrylic distemper, finished with rollers over a coat of alkali resistant primer applied over 1.0 mm thick wall putty complete all as specified and directed.
All as per item No.108 above, but on ceilings
M&L for applying one coat of synthetic enamal paint on old treated wooden surfaces of any description over 10cm width or girth including cleaning and preparation of surfaces complete all as specified and directed by Engineer-in-Charge.
M&L for applying one coat of synthetic enamal paint on old treated steel surfaces of any description over 10cm width or girth including cleaning and preparation of surfaces complete all as specified and directed by Engineer-in-Charge.
M&L Preparing new Steel or Iron Surfaces of any description, not exc 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint over a coat of Red Oxide/ Zinc Chrome Primer, complete all as specified and as directed.
M&L Preparing new Steel or Iron Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint over a coat of Red Oxide/ Zinc Chrome Primer, complete all as specified and as directed.
M&L for applying one coat of synthetic enamel paint on old painted brick, stone, concrete, asbestos cement or plastered surfaces exceeding 10 cm in width or girth including preparation of surfaces complete all as specified and directed.
M&L for preparation of old surfaces of any description and applying two coats of synthetic enamel paint over a coat of primer on brick, stone, concrete, asbestos cement or plastered surfaces exceeding 10 cm in width or girth, after complete removal of existing treatment, complete all as specified and directed.
M&L for preparation of new surfaces of walls and soffit of chajja, roof slab etc., by cleaning, brooming, rubbing and scrapping as required using broom, emery paper, putty blade/scraper as applicable to make the surface free from protrutions, loose particles, dust etc including necessary safety & protective measures such as safety belt, headgear etc, finishing the surface with 2 mm thick exterior wall putty (in two layers) for smooth finish and finishing with two coats of weather proof exterior emulsion paint over a coat of suitable exterior primer of approved make using airless spray technology capable of operating single spray gun with hose of adequate length and necessary scaffolding for upto 4 storey building height complete all as specified and directed.
M&L for complete removal of existing treatment on old painted surfaces of walls, roof slab etc., by cleaning, brooming, rubbing and scrapping as required using broom, emery paper, putty blade/scraper as applicable to make the surface free from loose paint, algae formation, dust etc including necessary safety & protective measures such as safety belt, headgear etc including filling cracks upto 5mm with and including suitable elastomeric crackfill paste and applying 2 mm thick exterior wall putty (in two layers) for smooth finish and finishing with two coats of weather proof exterior emulsion paint over a coat of suitable exterior primer of approved make using airless spray technology, capable of operating single spray gun with hose of adequate length and necessary scaffolding for upto 4 storey building height complete all as specified and directed.
M&L Preparing new Surfaces of wall and applying Three coats of white wash, complete all as specified and as directed.
SCH 'A' PART-II (ELECTRIFICATION WORKS) Taking down copper/ aluminium point wiring (light, fan, buzzer, socket or power) complete including fixture and fittings such as switches, ceilling roses, pendants, regulators, sockets, light fitting etc for reuse or removing from site and making good disturbed surface of walls, floors etc.complete all as specified and directed.
M&L for concealed type point wiring with 1.50 Sq. mm (nominal area) FRLS-H PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, laid in and including PVC conduit complete with all fittings and accessories, fixed to walls/ceiling, including mild steel terminal boxes 1.25 mm thick conforming to IS-5133 (Part-I) with 3.0 mm thick plastic laminated sheet top cover (ISI Marked) for mounting switches/ regulator /bell push etc and including 1.50 Sq. mm (nominal area) FRLS-H PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly, for one light point /bell point/ ceiling fan/exhaust fan point controlled by one way switch complete all as specified and directed. (NOTES: - (i) Where tube light fitting is to be fitted/suspended, CI Circular boxes shall be provided with the PVC Pipes in the ceiling & the unit rate shall be deemed to be included for the same. (ii) Cost of cutting chases for concealed wiring shall be deemed to be inclusive in the quoted rates. No claim in this regard shall be entertained at a later stage)
All as per item No. 120 above, but for one 5 amps switch socket outlet on same board controlled by another switch, complete all as specified and directed (concealed type point wiring with terminal box).
All as per item No. 120 above, but for one 5 amps switch socket combination on independent board, complete all as specified and directed (concealed type point wiring with terminal box).
All as per item No.120 above, but using 2.5 sqmm single core multi stranded copper conductor FRLS-H PVC insulated and unsheathed, cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with and incl 2.5 sqmm green FRLS-H PVC insulated and unsheathed, copper conductor as continuous earth wire with lugs complete all as specified and directed (concealed type point wiring with terminal box).
S & F Modular Switch 1 way, 6 Amps, 1 module complete all as specified and directed.
S & F Modular Switch 1 way, 16 Amps, 1 module complete all as specified and directed.
S & F Modular Socket 6 Amps, 2/3 pin combined, 2 module complete all as specified and directed.
S & F Modular Socket 6/16 Amps, 2/3 pin combined, 2 module complete all as specified and directed.
S & F Modular Fan step regulator, 120 watt, 2 module complete all as specified and directed.
S & F Modular Blank plate, 1 module complete all as specified and directed.
S&F Modular White cover plate with frame 3 module complete all as specified and directed.
S&F Modular White cover plate with frame 4 module complete all as specified and directed.
S&F Modular White cover plate with frame 6 module complete all as specified and directed.
S & F Modular type Metal Flush box 3 module complete all as specified and directed.
S & F Modular type Metal Flush box 4 module complete all as specified and directed.
S & F Modular type Metal Flush box 6 module complete all as specified and directed.
S&F ceiling rose surface, polycarbonate/bakelite, three terminals complete all as specified and directed.
S&F recess mounted LED luminaire, of size 600 mm x 600 mm, in powder coated CRCA housing , having glare free diffuser, operating voltage 180-270V, with constant current electronic driver complete with all accessories with and including 36 Watt LED and including all accessories, mounting frame etc and connecting up with three core flexible copper conductor wire of adequate size complete all as specified and directed and complying with the following specifications:- (a) minimum efficacy 110 lumen/watt (b) CRI not less than 80, (c) THD < 20% (c) having in built short circuit and surge protection (d) colour temperature not less than 5700 degree K (e) life not less than 25000 hours of operation (f) Weather protection: IP20
S&F surface mounted LED luminaire, 1 X 20 Watt in aluminium housing, operating voltage 180-270 V, with acrylic/polycarbonate diffuser & integrated constant current electronic driver complete with all other accessories internally prewired and including connecting up with three core flexible copper wire of suitable size complete all as specified and directed. complying with the following specifications:- (a) minimum efficacy 110 lumen/watt (b) CRI not less than 80, (c) THD < 20% (c) having in built short circuit and surge protection (d) colour temperature not less than 5700 degree K (e) life not less than 25000 hours of operation
Supply and Hanging, ceiling fan, with brushless DC motor, 1200 mm sweep, BLDC 5 Star rated with five years warranty (with / without remote), down rod, canopy, fan blades and accessories and connecting up including provision of PVC insulated, sheathed round flexible wire with multi stranded copper conductor of size 1.0 Sqmm, 3 core, 1100 Volts grade, from ceiling rose/ connector to fan including dismantling existing fan complete all as specified and directed. (MAKE : HALONIX, Model: PLASMA BLDC/ CROMPTON, Model : EENERGION GOOVE /BAJAJ, Model: SKU-251100-Emergps 28W 1200mm CF / ORIENT, Model: HECTOR 500 / HAVELLS, Model: Efficiencia Neo/ USHA, Model No.ENERGIA) NOTES: (i) Old fan, if any taken down, shall be deposited by contractor in MES store yard. (ii) The vender shall be provided with marking / embossing toll free No duly indicating the guarantee/warrantee period on the every fan. (iii) The tenderer shall be marked/inscribed the MES / SM No on fan with synthetic enamel paint (Black colour)
S&F in repair MODULAR MCB protected power unit with one 25 Amps socket with 3 pin plug top and including 01 No MCB, DP, and starter 25 Amps ratings with six module plate and flush metal GI box and electrically connected complete all as specified and directed. (MAKE : HAVELLS, Cat No. DHDUCDP0253025 / NORTH WEST, Cat No: ACPU6M-BT or equivalent model in ABB / CRABTREE / HAGER / SCHNEIDER / LEGRAND) (NOTE : Enclosure & MCB shall be same manufacturer. Cost of MCB is deemed to be included in the quoted rate)
Taking down of old Submain wiring any type including batten/ conduit/ casing at any indicated situation complete all as specified and directed.
M&L for sub main wiring with two run of FRLS-H PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 Sqmm alongwith one run of FRLS-H PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 Sqmm as earth continuity conductor drawn through and including PVC conduit of suitable size, surface type, complete all as specified and directed. (NOTE : Three runs of single core 4.0 Sqmm cable & one run of PVC conduit shall be measured as one unit)
M&L for sub main wiring with four run of FRLS-H PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 Sqmm alongwith one run of FRLS-H PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 Sqmm as earth continuity conductor drawn through and including PVC conduit of suitable size, surface type, complete all as specified and directed. (NOTE : Four runs of single core 6.0 Sqmm cable & one run of PVC conduit shall be measured as one unit)
Taking down of Old MCB DB any type any size including MCCB/RCCB/MCBs and disconnecting the serviceable MCBs and keeping in safe custody for reuse at site or removal from site complete all as specified and directed.
Supply and Fix, Double Door, Sheet Metal Enclosure for DBs (Premium range), for mounting of MCB for 240 Volts, TPN 4 way, with 200 Amps rated copper bus bar, complete all as specified and directed. (MAKE : L&T / LEGRAND /ABB / SCHNEIDER / C&S /PANASONIC/ HAGER)
Supply and Fix, Double Door, Sheet Metal Enclosure for DBs (Premium range), for mounting of MCB for 240 Volts, SPN 8 way, with 100 Amps rated copper bus bar, complete all as specified and directed. (MAKE : L&T / LEGRAND /ABB / SCHNEIDER / C&S / PANASONIC / HAGER)
NOTE FOR ITEM NO.145 & 146 :- (1) Incoming MCB and outgoing MCBs shall be measured and paid separately as "Supply Only". (2) Quoted rate is deemed to be inclusive of blanking plate for slots remaining blank after fixing of MCBs. (3) DB & MCB shall be of the same manufacturer.
S&F MCB (premium range), 'C' series, TPN, 415 volts, 63 Amps, breaking capacity 10KA complete all as specified and directed. (MAKE : L&T / LEGRAND / SCHNEIDER / ABB / C&S / PANASONIC / HAGER)
S&F MCB (premium quality), 'C' series, SPN, 40-63 Amps, breaking capacity 10KA complete all as specified and directed. (MAKE : L&T / LEGRAND / SCHNEIDER / ABB / C&S / PANASONIC / HAGER)
S&F MCB (Premium Quality), 'C' series, single pole, 6 to 32 Amps, breaking capacity 10KA complete all as specified and directed. (MAKE : L&T / LEGRAND / SCHNEIDER / ABB / C&S / PANASONIC / HAGER)
SHEIKH ENTERPRISE
RAJ ENTERPRISE
M/S L.R.ENTERPRISES
DGR CONSTRUCTION
dutta and dutta
UNIVERSAL TRADING CENTRE
MODERN AGENCY
M/S SRINIVASA CONSTRUCTION
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .