AGE I CGN 08 24 25 REPAIR TO EXTERNAL WALL AND GATE FENCING AT SEC-24 CG NOIDA UNDER AGE (I) CG NOIDA

Amount

Demolition of brickwork masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and as directed

Demolition of cement concrete (Un-reinforced ) in ground floors and paving n.exc 15 cm thickness (below or above ground level) etc complete all as specified and as directed

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc and including removal of debris and rubbish from the site complete all as specified and as directed

M&L for brick work with sub class 'B' brick, straight or curved on plan exc 6.0 m mean radius built in CM 1:4 etc complete all as specified and as directed

M&L for Cement concrete type D-2 1:4:8 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed.

S&F in repairs re-inforced punched concertina coil of 600mm dia (chrome razer or blade wire) with barbed tape of 0.50 mm thick galvanised steel sheet or core wire of dia 2.5mm of high tensile steel wire including galvanised mild steel staple/clips for tying at crossing etc complete all as specified and as directed.

S&F in repairs galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc (each line wire to be measured) complete all as specified and directed.

M&L for 15 mm thick rendering in CM 1:4 on fair faces of brick work or concrete surface finished fair and even complete all as specified and directed.

M&L for two coats of cement base paint on walls including preparation of new plastered surfaces complete all as specified and directed

M&L for complete removal of existing treatment and applying two coats of cement base paint complete all as specified and directed by Engr-in-Charge.

S&F mild steel framed work ornamental and intricate design such as grills, gratings, etc with ends of bars shouldered or riveted or forged into spikes; framed guard bars; barred iron doors; ladders; framed balluster; walk ways; railings; framework of watertanks and simillar works conforming to Fe290 gde-E-165 complete all as specified and directed.

M&L for two coats synthetic enamelled paint over one coat of red oxide primer incl preparation of new surface of steel of any description over 10cm width or girth complete all as specifed and as directed by Engr-in-Charge.

M&L for exterior wall cladding tiles brick pattern of any colour approved by engr-in-charge of size 300x 600mm x 10mm thick mat finish as dado laid over rendering in 10mm thick back coat in CM 1:4 etc. set and jointed in neat cement slurry and pointed in coloured cement with pigment complete all as specified & directed.

Dismantling of plain or corrugated steel sheeting any gauge, thickness including Nainital or similar pattern roof covering as as specified and directed.

S&F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as as specified and directed.

S&F in repairs ACP CLADDING - Aluminium Composite Panels 4mm thick of any colour approved by eng-in-charge, ) on vertical and horizontal surface on exteriors of building, ACP panel consisting of two aluminium cover sheets and a plastic or high mineral filled core, both side stove lacquered finish and top side of approved PVDF colour /shade including cutting with jig saw, bend to shape, making grooves, making holes by drills, natural aluminium tube base framing fixed with cleats, self tapping screwing, welding, clamping, glueing, sealing the joints with approved sealant complete as per pattern shown in drawings at all levels including cost of mild steel pipe scaffolding erecting / dismantling & removing of film complete all as specified and as directed.

M&L in repairs for 18mm thick designer WPC jali exterior grade of design, shape and colour as approved by Engineer in charge conforming to IS 2380 including necessary fitting/frame if required, fixed to wall/shaft/partition complete all as specified and directed.

Sanjay Associates

KRISHANA ELECTRIC WORKS

Shri Radhey Associates

DP COMPLEX

AMBEY CONSTRUCTION

M/S R.S. Builders