SPECIAL REPAIRS TO A-1 (COOK HOUSE), B-1 AND B-2 (TOILETS), C-1 AND C-2 (BATHROOMS) OF BUILDING NO P-04 OF 15 ASSAM UNDER GE (W) COLABA, MUMBAI

Amount

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings, complete all as specified and directed.

Dismantling Battens for tiles, shingles etc, of any size including tilting fillets not exc 15 cm, complete all as specified and directed.

Dismantling timber scantlings 40 sqcm and over in section, in any position, complete all as specified and directed.

M & L for Second class hard-wood clean sawn timber in scantlings, complete all as specified and directed.

Supplied and fixed in repairs to replace old or decayed boarding in patches including cutting out old, piecing, heading joints etc 20 mm thick second class hardwood clean sawn boarding fixed with nails with butt joints in any situation including scafoldings of any hieght, complete all as specified and directed.

Fixing only in repairs in patches including cutting out old piecing, heading joints etc 20 mm thick second class hardwood clean sawn boarding fixed with nails with butt joints in any situation including scafoldings of any hieght, complete all as specified and directed.

Material and labour in repairs to replace old or decayed boarding in patches including cutting out old piecing, heading joints etc second class hardwood wheather boarding, clean sawn, plain, 20 mm thick or feather edged 15 mm to 20 mm thick and fixed with 30 mm laps in any situation including scafoldings of any hieght, complete all as specified and directed.

M & L Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, complete all as specified and as directed.

Supply & fix Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 MPA as in roof coverings /claddings to wall, fixed with self tapping screws including scafoldings of any hieght, complete all as specified and directed.

S & F hot rolled medium and high tensile structural steel of grade E 250 quality A conforming to IS 2062: 2011 as in joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20 mm of the length indicated), complete all as specified and as directed.

S&F Fe 410-W (GdeE- 250) quality A, plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment, complete all as specified and as directed.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and as directed.

Material and labour for brick work with sub class 'B' brick straight curved on plan exceeding 6 metre mean radius with old size bricks built in CM 1:4 for cracked wall of manholes, septic tank, soak pits etc, complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level), complete all as specified and directed.

M&L for Cement concrete type B-2 1:2:4 (40mm graded aggregate) in surface channels and drains, complete all as specified and as directed.

M&L for Cement concrete type B-2 1:2:4 (40mm graded aggregate) for foundation fillings and mass concrete or coping, complete all as specified and as directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and rubbish off the primises, complete all as specified and as directed.

M&L Non Skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for digital coloured glazed ceramic tiles 300x450x7mm / 300*600*7mm thick in vertical surfaces (including designed borders ) such as skirting and dados set and jointed in neat cement slurry pointed in coloured cement to match including rendering 10 mm thick on fair faces of brick work in CM (1:4), complete all as specified and directed. Note:- (Rate of Designer border in vertical surface will be deemed into quoted rates)

M&L for Screed bed or bedding layer of mortar 15 mm thick in cement mortar (1:6) for laying floor finishes, complete all as specified and directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover filletsl, complete all as specified and directed.

M & L for Anodized aluminium snap grid having a size of 605mm x 605mm and sections incorporated in frame work shall conform to IS 733, IS 737 and IS 1285 and snap grid frame work shall be fixed to ceiling with supporting hanger 6mm dia mild steel rod, J bolts with necessary bolts, nuts and washers all as manufacturer instruction, the main & cross tees shall be jointed at junction/crossings with anodized aluminum angle bracket of size indicated it shall be 19.05mm x 19.05mm x 1.45mm, weighing 0.14 Kg per RM, fixed with suitable mild steel, bolts nuts and washer all as per manufacturers instruction, the snap grid shall be supported at ends all along the wall with anodized aluminum angle of size as indicated along if not indicated it shall be 38mm x 25mm x 2.18mm, weighing 0.358 Kg per running meter, complete all as specified and directed.

M&L for 6 mm thick exposed metal frame ceiling with calcium silicate board of siliceous and calcareous materials reinforced with cellulose fibre for fixing in 605 X 605 mm grids, complete all as specified and directed. Note:- Frame work for ceiling shall be measured and paid separately.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar, complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 20-25 mm thick over cement screed bese laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to mirror finish inluding Screed bed or bedding layer of mortar 20 mm thick in (1:6) for laying floor finishes, complete all as specified and directed.

Ditto all as per Item No. 25 above but in riser of steps, skirting, dado and pillar laid over cement screed and jointed over rendering 10mm thick on fair faces of brick work in CM (1:4), complete all as specified and directed.

Machine Grinding/rubbing/polishing to Kota stone surfaces to mirror finish, complete all as specified and directed.

M & L for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations, complete all as specified and directed by Engg-in-Charge.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15 cm thickness (below or above ground level), complete all as specified and directed.

M & L for RCC work as in columns, beams, slabs, chajja, railing in M25 (Design Mix) using 20 mm nominal size crushed stone aggregate, complete all as specified and as directed.

M&L for Granite (of any colour)18 - 20 mm thick machine cut, pre polished, bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone as in kitchen platform, flooring , window cill, wall cladding including 20 mm thick screed bedding in cement mortar 1: 6 and all other similar works, complete all as specified and directed.

Taking down cement plaster of any description from brick wall surfaces etc including racking out joints and hacking for key, scrubbing down with water etc, complete all as specified and directed.

Material and labour for 15mm thick Ready Mix Plaster (internal/external) in single layer of make / brand - ACC's Accoplast / CK Birla's Aerocon / Ambuja, mixed with liquid water proofing compound on other than fair faces of brick wall or concrete surfaces, (upto 05 storeys of bldgs) including use of scaffolding, complete all as specified and directed. Note :- Liquid water proofing compound will be measured and paid seperately..

Supply only Liquid waterproofing compound, complete all as specified and directed.

M&L for Preparation of new plastered surfaces and applying two coats of oil bound distemper over a coat of alkali resistant priming paint over 1mm thick (average) wall putty, complete all as specified and directed.

Material & Labour for preparetion of new plastered surface and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new plastered surface, complete all as specified and directed.

Materials and labour for complete removal of existing treatment and applying two coats of oil bound distemper over a coat of alkali resistant priming paint over 2mm thick (average) wall putty, complete all as specified and directed.

M&L for Complete removal of existing treatment, complete all as specified and directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surface, complete all as specified and directed.

M&L for Preparation of old painted wood or wood based surfaces, of any description, not otherwise described over 10 cm width or girth and apply one coat of synthetic enamel paint, complete all as specified and directed.

M & L for Preparation of old painted steel surfaces of any description over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and directed.

M & L for Preparation of new steel surfaces of any description over 10 cm width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide, zinc primer, complete all as specified and directed.

M&L for Preparation of new wood or wood based surfaces, of any description, not otherwise described over 10 cm width or girth and apply two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

S&F 15 mm dia bore fancy type chromium plated with flange long body bib taps with wall flange cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe, or for brass ferrule, complete all as specified and as directed.

S&F in repair sink made of stainless steel sink with draining board made out of 1 mm thick sheet for kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe including 40mm waste fitting overall size 915x460mm with bowl size 410x 330x160 mm etc, complete all as specified and as directed.

S&F PVC (SWR) floor trap with grating including jointing with solvent cement, 75mm diameter of outlet, complete all as specified and directed.

S&F PVC (SWR) multi floor trap with grating including jointing with solvent cement, 75mm diameter of outlet, complete all as specified and directed.

Taking up or down steel tubing and connection including cleaning for refixing or removed to store, 15 mm dia bore, complete all as specified and directed.

Taking up or down steel tubing and connection including cleaning for refixing or removed to store, 20 mm dia bore, complete all as specified and directed.

S&F GI tubing 15 mm bore medium grade galvanised with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm, complete all as specified and directed.

S&F GI tubing 20 mm bore medium grade galvanised with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm, complete all as specified and directed.

Cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth, complete all as specified and directed.

S&F PVC (SWR) pipes, 75 mm external dia double socketed in any length with rubber joints, fixed to walls with PVC brackets/clips, complete all as specified and directed.

S&F PVC(SWR) bends suitable for 75 mm external dia, complete all as specified and directed.

S&F Anodised aluminium section powder coated for doors windows, ventilator door partition including fabrication of frame shutters and fixed with necessary lugs, cleats rollers, handles, locking arrangement etc including all necessary accessories such as glazing clips, provn of AC opening and rubber beading for fixing glass beading for fixing glass panes in frame complete all as specified by Engr-in- Charge. Note- (i) Glass panes will be measured and paid separetly. (ii) The quoted rate shall be inclusive of cost of rubber beading and glazing clip hinges, handle however it will be not be weighteed and not paid separately. (iii) All other minor details including cost of locking arrangement shall be included in the quoted rate.

M&L for 5.50 mm thick sheet glass, ordinary quality and glazing with aluminium beads and rubber gaskit in square exc 0.50 sqm in each pane frosted on one side, complete all as specified and directed.

Supply & fix stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples, complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 sqm each, complete all as specified and directed.

Taking down Chowkhats or frames with shutters (without taking of shutters from the frame) exc 1.50 n exc. 4.00 Sqm each, complete all as specified and directed.

Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm single piece extruded PVC profiles reinforced with 19 x 19mm MS square tube provided with EPDM rubber gasket weather seal through out the frame and the profile mitre cut at two corners and joined by inserting 2 nos 150mm long brackets of 15 x 15mm MS square tube inside 19 x 19mm MS square tube suitably screwed, complete all as specified and directed.

Supply & fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes of size 15 x 15mm for top and bottom rails and 19 x 19mm for stiles, MS frame covered with 5mm thick single piece extruded PVC profile 'C' channel having a 5mm thick PVC sheet strip of 20mm width struck inside with solvent cement, forming stiles and 5mm thick single piece extruded PVC profile for top rail, lock rail & bottom rail on either side and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail; panelling of 5mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with PVC sheet beading and joined together with solvent cement adhesive etc all as per manufacturer's instructions and drawings as shown in SSR Part-I 2009, complete all as specified and directed.

M&L in repair aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples or wooden/ Aluminium beadding, complete all as specified and directed.

Material and labour for preparation of wood and wood based materials, new or old, of any description and girth, not otherwise described, treating small articles such as holdfasts, end of posts, backs of chowkhats, etc area n. exc. 0.1 sq m each and treated with tar or coal tar black paint, complete all as specified and directed.

Supply & fix for 2nd class hard wood plain, solid,straight chowkhat and frames, wrought framed, rebated on the solid rounded or chamfered, put together with glue pinned at joint complete all as specified and directed.

Supply & fix 35 mm thick 2nd hard wood rail and style plain framed panelled shutters (any panel) with lock rail and panel of 9 mm thick B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS 1003 (Part-I) kiln seasoned and chemically pressure treated, complete all as specified and directed.

Supplied and fitted to chowkhats of 2nd class hard wood 35mm thick Glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded, fittted with cut and mitred beads for securing gauge,etc sizes of member of shutter as specified SSR part-I Section 8 clause 8.24 (a), complete all as specified and directed.

Supply and fixing Mild steel work in hold fasts, wall ties, pintle hinges and all other similar small articles conforming to Fe-290 Gde-E-165, complete all as specified and directed.

Supply & fix 300mm long aluminium alloy, anodised sliding door bolt with haps, staple (bolt type) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy, complete all as specified and directed.

Supply & fix 150 mm long aluminium handles (ISI marked), cast type, anodised, complete all as specified and directed.

S&F aluminium anodised 100 mm barrel tower (ISI marked) bolts of extruded section, complete all as specified and directed.

S&F 100 mm butt hinges (ISI marked) extruded aluminium alloy with galvanized mild steel hinges pin anodised type `C'-22, complete all as specified and directed.

S&F 75 mm butt hinges (ISI marked) medium weight cold rolled stainless steel, complete all as specified and directed.

S&F of 18mm thick UV coating, HDHMR board exterior grade, including acrylic high gloss sheet of 3mm thick over HDHMR board, anti fungal, moisture resistence,anti borer, as per IS 14587 for frame and shutter for kitchen cabinets/Cupboards etc. complete all as specified and directed by Engg-in-Charge. NOTE:- Sample as approved by GE.

S&F of 18mm thick UV coating, HDHMR board exterior grade, anti fungal, moisture resistence, anti borer, as per IS 14587 for frame and shutter for kitchen cabinets/Cupboards etc. complete all as specified and directed by Engg-in-charge. NOTE:- Sample as approved by GE.

S&F in stainless steel cabinet / drawers handle having a length of 250mm and shape, complete all as specified and directed.

S&F 15 mm dia bore fancy type chromium plated 2 way angle valve with flange bib taps with wall flange cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe, or for brass ferrule, complete all as specified and as directed.

S&F Urinal spreader of stainless steel chromium plated for fixing with 15 mm dia pipe, complete all as specified and directed.

S & F in 15 mm bore chromium plated Angular stop valve with wall flange of cast copper alloy screwed down high pressure with crutch butter fly handle screwed both ends for iron pipe or for unions and fixed all as specified and directed.

S & F PVC connection 15 mm size with PTMT nuts of length 600 mm of approved quality suitable for hot and cold supply , complete all as specified and directed.

Supply & Fixing in repair vitreous China squatting pan, ' Orissa patteren, size 580 x 440 mm white, with integral footrests (excluding flushing cisteren and flush pipe) including taking down existing squating pan, complete all as specified and directed.

S&F Vitreous China wash down water closet pan (pedestal pattern), white including soft closing hinges, seat cover and flush pipe, complete all as specified and directed.

S&F in repairs 10 litre capacity PVC low level flushing cistern with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of size, complete all as specified and directed.

S&F Urinals flat back with integrated EFS of size 355x340x535mm in snow white including each and all acessories, complete all as specified and directed.

S&F Vitreous china urinal partition white of size 310x700 mm terminating about 40cm above floor line, fixed in repairs, complete all as specified and directed.

S & F for 5 mm thick Saint-Gobain modi guard ultra looking mirror, having long lasting film suitable for bathroom including hidden studs, complete all as specified and directed.

S&F Brass CP pillar cock with extension body including all necessary fittings screwed down for iron pipe for Wash Hand basin, complete all as specified and directed.

S&F Chromime plated, cast copper alloy jet spray with 1 mtr SS chrome plated hose and hook (for European seat), complete all as specified and directed.

M&L for Gently cleaning or removing the existing paint the surfaces of the stone masonry and piers with specification water misting techniques employing air water jet using a fine nozzle sprinkling system calibration to spray fine mist along the stone surfaces without over wetting followed up by gentled surfactants and cleaning brushing with soft nylon brushes as specified, gentle surfaces cleaning may include using water misting amdmild Ph balanced surfactants as specified for indicated areas to remove surfces dirt grith surfaces accreeetions lime wash etc by means of water misting and Ph balances surfaces cleaning all as specified and directed. Note:- Quoted rate shall be inclusive of removing vegitation on wall surfaces, chajja etc and erection and dismantling of MS tubular double scaffolding up to 6 to 10 metre height and provision of necessary safety equipment to sklled works to carry out works.

M&L for Raking out cement pointing or any other hard material used and careful repointing and repair to be carried of the damaged pointing to walls externally and internally above the base of vaults and apse domes with poor joints, in lime mortar 1:3 (1 lime, 3 sand mix to be approved by consultants before application) of size 50x15mm and filling in of any holes/damage area of stones that may have to be filled in lime mortar pointing to be carefully colour matched using additives such as kattha, sand stone dust and such additives to exactly preparation of batches of samples upto 20 samples of colour matched lime mortar for approved by Eng-in-Charge. The contractor to ensure use of masking tapes and sharp specialized spatulae and tools to ensure clear lines and high level of workmanship on site, complete all as specified and directed.

M&L for applying two coats of melamine polish on external wall clading after perpration of surface all as per manufacturers direction all as specified and directed by Engr-in-Charge.

Demolition and breaking up drain pipes of dia 200 mm (Salt glazed ware, AC or Reinforced concrete) set in cement mortar, complete all as specified and directed.

Excavating in trenches, in soft soil n exc 1.5 m width n exc 1.5 m depth in any type of soil and getting, complete all as specified and directed.

S&F in repair Reinforced concrete pipes, class NP3, 200 mm dia laid and jointed with collars, complete all as specified and directed.

M&L Concrete bed to drain pipes of dia 200 mm including packing under and completely surrounding pipes with concrete after they are laid and tested; in PCC in 1:3:6 type C-2, complete all as specified and directed. Note :- (i) Thickness of bed below the barrel of pipes: 15cm for pipes 200mm dia and over. (ii) Width of bed: Outer diameter of drain pipes (not of sockets/collars) plus 30 cm. (iii) The rates include for any necessary shuttering and supports to concrete and for laying beds to falls.

Returning, filling including spreading leveling watering and well ramming in layers n. exc 25 cm in soft/loose soil, complete all as specified and directed.

Removing excavated soil outside of MOD land to a distance n. exc 50 m and depositing where directed at a level not exc 1.5 m above the starting point, complete all as specified and directed.

M&L for RCC (1:2:4), type B-1 (using 20 mm graded stone aggregate) Precast cement concrete cover slab for manhole and similar article with plain face, set in cement mortar 1:4 complete including demolition, complete all as specified and directed.

S&F TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.

M&L for Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and directed.

M&L Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard/dense soil, complete all as specified and directed.

S&F of Structural steel work in tubular/square tube trusses including special shaped washer, gusset/bearing plate etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240, complete all as specified and directed.

M&L for cement concrete type B-0 1:2:4 (12.50 mm graded crushed stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for, complete all as specified and directed.

M&L for 100mm thick cement concrete 1:3:6 type C-2, 40mm graded aggregate) in sub base, complete all as specified and directed.

Material and labour for crushed sand filling under precast interlocking paver blocks and all other similar works, complete all as specified and directed.

M&L Rubber moulded glossy finished precast concrete interlocking paver block of any shape and size confirming to IS 15658 -2006 of 60 mm thickness, M-35 Grade laid over sand cushning including compaction of paver blocks using surface vibrator, complete all as specified and directed. Note :- Sand cushioning shall be paid separately under relevant item.

M&L in repair for heavy duty external floor tiles of 15-16 mm thick of size 600x600 mm of matt finish, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of the tiles laid over 15 mm thick screed bed in CM 1:6, complete all as specified and directed.

S & F in repairs factory made precast RCC drain cover of size 1000 mm x 500 mm x 100 mm thick fixed to drain in CM (1:4), complete all as specified and directed.

Taking down carefully copper/aluminum point wiring light/fan/sockets out let/power point complete (fittings such as switches, sockets, ceiling rose, pendent holders, light fittings etc. are to be measured separately) and/or drawing out from existing conduit/batten and making good disturbed surface of walls/floors/ceiling, complete all as specified and directed.

Material and labour for Point wiring with 1.50 Sqmm single core PVC insulated, unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor drawn through and incuding medium grade, ISI marked, cassing capping with accessories and incuding provision of 1.50 Sqmm single core PVC insulated, unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box/metal flush box with suitable modular or pressed steel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally including provision of new 3 mm thick plastic laminated sheet top cover for housing the switches, socket outlets, fan regulators etc. with brass screws and brass washers and making good the disturbed surfaces as per existing for one light fan point controlled by one switch. Note:- Switch, socket and fan regulators to be measured and paid for separately.

Description all as per Srl item No. 110 here in before but for socket outlet point 5 Amp on same board.

Description all as per Srl item No. 110 here in before but for socket outlet point 5 Amp on Independent board.

Description all as per serial item No. 110 above but with 4 sqmm cable for 3 pin 15 Amps switch socket outlet (Power point).

Supply and fix switch piano (ISI marked) Single pole 240 volts, 5Amps, complete all as specified and directed.

Supply and fix socket (ISI marked) 2/3 pin and 5 Amps, flush type, 240 volts, complete all as specified and directed.

Supply and fix switch socket combination (ISI marked) 2/3 pin and 5/15 Amps, flush type, 240 volts, complete all as specified and directed.

S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as required, complete all as specified and directed.

Supply and fixing ceiling rose surface bakelite 65x50mm, 3 terminal, complete all as specified and directed.

S & F LED light fitting 1x9W/1X10W luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed.

Supply and Fix 20 watt LED, 6500 K, in repair, 4 feet long fixed including on pvc square for mounting the fittings and electrically connecting with three single core 23/0.0076. PVC insulated multi strandard copper flexible cable from ceiling rose to light fitting (connector block of lamp fitting) and one for earthing ,complete all as specified and directed.

S&F Exhaust fan 230 volts, 250mm, metal heavy dutywith wooden frame including making all electric connection complete all as specified and as directed including cutting of hole on wall and makng good disturbed surface of wall and outer wooden box for fan fix on wall, complete all as specified and directed.

S&F Exhaust fan 230 volts, 450mm, plastic body including making all electric connection complete all as specified and as directed including cutting of hole on wall and makng good disturbed surface of wall and outer wooden box for fan fix on wall, complete all as specified and directed.

Supply and fixing Ceiling fan complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE, five star rated with brushless direct current motor BLDC making all electric onnection, huck and suitable size rod for hanging ceiling fan, complete all as specified and as directed.

M&L refixing of ceiling fan (old fan) and servicing complete connecting up including fan provision of cable from ceiling rose or connector and fan painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. with taking down fan, sealing cable end, dismantling romoving and hanging fan and blades and making fuctionable i .e change capacitor, condenser, fan rod 3 to 5 RM of GI pipe, winding, servicing, complete all as specified and directed.

S&F in repairs LED 36 Watt 3000 K, Slim racess mounted LED panel 2x2 with premium diffuser to ensure glare free & even light distribution, with integrated electronic driver of same make connecting with PVC insulated and PVC sheathed copper flexible cable and necessary fixing arrangement, complete all as specified and directed.

M&L refixing of LED batten seriviceable (old) including servicing, nut bolts, clmps for refixing, complete all as specified and directed.

Supply and fixing LED security Building light LED 45 Watt, pressure die cast aluminum housing, heat resistant glass, IP65 protection, better optics for uniform distribtion complete with all accessories internally pre wired and including connecting up with three core 1.5 sqmm flexible copper conductor cable from ceiling rose to connector of light, complete all as specified and directed.

Supply and fix MCB Distribution board, 240 volts single pole and neutral, single door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 8 ways, fixed on wall duly grouted in solid block wall or on wooden board with electrical connection, including taking down old, complete all as specified and directed.

Supply and fix MCB Distribution board, 240 volts single pole and neutral, single door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 16 way, fixed on wall duly grouted in solid block wall or on wooden board with electrical connection, including taking down old, complete all as specified and directed.

Supply and fix MCB DP, 240 Volts, 40 Amps, 10 KA rupturing capacity 'C' series, complete all as specified and directed including taking down old one.

Supply and fix MCB, single pole 240 volts 6 to 32 Amps capacity fixed in DB's including taking down old one, complete all as specified and directed

Supply and fix in repairs MCCB DB TPN 4 way vertical sheet metal enclosure TPN 415 volts, 50 Hz, with IP-43 protection, single door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting, complete all as specified and directed. Note : (i). MCB SP/TPN shall be measured and paid seperately under appropriate items of this schedule . (ii). Copper thimble shall be used for connection of cable .

Supply and fix MCCB TPN, 240 Volts, 63 to 100 Amps, 10 kA rupturing capacity 415 Volts, complete all as specified and directed including taking down old one.

Material & Labour for Sub main wiring with two run of 6 sqmm stranded copper conductor PVC unseathed FRLSH wire along with 6 sqmm green colour wire as earth contuinity conductor connected to common earth dolly including PVC FR heavy duty conduite of adequate size (not less than 32mm dia) for housing the wires for from Pannel / Main DB to house SPN DB including taking down old Unsv submain with all associated fixtures complete all as specified & as directed by Engr-In-Charge. Note:- (i) Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB. (ii) Mode of measurement two runs of 6 sqmm cable and one run of 6 sqmm cable with PVC conduite shall be measured as one length.

M & L Sub main wiring with two run single core 4 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including 20mm dia Cassing capping ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 4 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board/distribution board and testing on completion inculding taking down old wiring etc, complete all as specified and directed. Note: (i) Two runs of 4 sqmm and one run of 4 sqmm cable and one run of PVC conduit shall be measured as one RM.

M & L Sub main wiring with two run single core 1.50 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100V including 20 mm dia Casssing cappiing ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 1.50 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board/distribution board and testing on completion inculding taking down old wiring etc, complete all as specified and directed. Note: (i) Two runs of 1.50 sqmm and one run of 1.50 sqmm cable and one run of PVC conduit shall be measured as one RM.

Supply, lay in trenches, floors, fix on wall/pole, passing through pipes etc., LT UG cable, 1100 volts grade, PVC/ XLPE insulated, with multistranded aluminium conductors, armoured with galvanised steel wire or tape, gland, lugs etc, of size 35 sqmm 3.5 core, confirming to IS specifications, complete all as specified and directed.

Supply, laying connecting and testing XLPE insulated, PVC sheathed, armoured LT electric power UG cable (heavy duty) with stranded aluminium conductor, 1100 Volts grade, cross sectional area 10 Sqmm 2 core laid through duct/ pipe / in trench etc. including excavation, Refilling, removing, sand and brick as requirement cable glands & lugs, complete all as specified and directed.

Supply and fixing of hot water Geysers of 25 ltrs capacity 5 star rated vertical type including fixing of bolts, nuts grouted into the wall, and necessary cement work, making good of disturbed surface of wall, giving electric, hot and cold water pipe, tab etc and water connection and testing after installation, complete all as specified and directed.

Supply & laying galvanized steel tubing, medium grade laid in trenches/floor/wall and joined including necessary fittings such as bends, elbow, tees, sockets, etc for 15mm dia pipe, complete all as specified and directed.

Material and labour for earthling complete with galvanised steel earth plate electrode 60 cm X 60 cm X 6 mm buried directly in ground vertically to a depth notless than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.50 m below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, check nuts and washers, galvanised steel and protected by GI pipe 15 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C-1, precast RCC (1:2:4) type B-1 cover slab 30 cm X 30 cmX 5 cm with 10mm dia TMT bars 8 cm c/c both ways and one handle for lifting made out of 8 mm dia TMT bar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown in electrical plate No 3 of SSR part -I.

N F ENTERPRISES (BID ID -3346697)

Bright Construction Co (BID ID -3330310)

RUPESH CONSTRUCTION CO (BID ID -3338948)

SAHI SAGAR ENTERPRISES (BID ID -3347198)

Unitech Enterprises (BID ID -3338612)