PERIODICAL SERVICES OF OHT AND CERTAIN B/R MAINT WORK OF WATER SUPPLY INSTALLATIONS UNDER GE (E/M) LUCKNOW

Amount

M&L for preparing surfaces, plastered or unplastered new surfaces of ceiling and applying three coats white wash all as specified and directed.

M & L for preparation of plastered surfaces and applying two coat of oil bound disemper over one coat of oil base primer all as specified on walls surface.Incl a coat of 3mm wall care putty complete all as specified..

M&L Preparation of plastered or unplastered surfaces of walls by brooming down and priming plastered and other surfaces with cement paint primer ( before application of cement base paint) including two coats of cement base paint complete all as specified.

M&L for complete removal existing treatment and distempering walls with two coats of cement base paint white or tinted over a coat primer on wall sufaces.(up to 25 mtr height) complete all as specified..

M & L for preparation of old decorated plastered or unplastered surfaces of walls by brooming down or steel wire brushing scraping down smoke soot, moulds moss and efflorescent salts, trading oil and greasy spots and applying one coat of white wash all as specified (up to 25 mtr height) complete all as specified.

All as per item No 5 above but on ceiling.(up to 25 mtr height)

M & L for preparation of old plastered or unplastered surfaces of walls by washing, rubbing down & stopping etc, and applying one coat of cement base paint of any tint/shade all as specified.(up to 25 mtr height)

M & L for preparation of old plastered or unplastered surfaces of walls by washing, rubbing down & stopping etc, and applying one coat of distemper oil emulsion of any tint/shade all as specified. (up to 25 mtr height)

All as per item No 8 above but on ceiling.(up to 25 mtr height)

M & L preparation of old brick, stone, concrete, AC or decorated plastered surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed(up to 25 mtr height)

M&L applying one coats of Apex ( Asian Paint) / Weather coat (Berger) over old painted surface including preparation of wall surface complete all as specified and directed by EIC.(up to 25 mtr height)

M & L for preparation of old painted surfaces of steel of any description, not otherwise described over 10 cm width or girth, including knotting and stopping and applying one coat of synthetic enamel paint all as specified.

M&L for painting with two coats of synthetic enamel paint over one coat of red oxide primer exc 10 cm width or girth after preparing new steel surface complete all as specified.

M & L for preparation of old painted wood and wood based surfaces of any description, not otherwise described over 10 cm width or girth, including knotting and stopping and applying one coat of synthetic enamel paint all as specified.

Taking down Chowkats or frames not exc 1.5sqm each and removing from site complete all as specified and directed by Engineer-in-Charge

Taking down Chowkats or frames exc 1.5sqm but not exc 4 sqm each and removing from site complete all as specified and directed by Engineer-in-Charge.

Taking down Chowkats or frames with shutters (without taking off shutters from the frame) not exc 1.5sqm each and removing from site complete all as specified and directed by Engineer-in-Charge.

Dismantling RCC posts or struts embedded in ground/concrete/hard core/brick work/masonry , any section including taking out embedded portion and making good disturbed portion/ground complete all as specified and directed

Demolition and breaking up 100mm bore drain pipe (salt glazed ware, AC or reinforced concrete) set in cement mortar complete all as specified and directed by Engineer-in-Charge.

Dismantling 100mm bore cast iron drain pipe, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed by Engineer-in-Charge.

Dismantling 75 mm bore cast iron drain pipe, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed by Engineer-in-Charge.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed by Engineer-in-Charge

Taking up or down 15mm bore steel tubing and connections with fittings such as stop cock bib cock etc including cleaning for refixing or removal complete all as specified and directed by Engineer-in-Charge

Taking up or down 20 mm bore steel tubing and connections with fittings such as stop cock ‘bib cock etc including cleaning for refixing or removal complete all as specified and directed by Engineer-in-Charge

Dismantling exc 250 but n. exc. 500 litre capacity water tank and remove from site complete all as specified and directed by Engineer-in-Charge.

Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed by Engineer-in-Charge.

Cutting holes in stone walls built in CM for inserting hold fast and making good dismantaled portion in PCC 1:2:4 type B1 , depth of emeded portion of hold fast exc half brick but n exc one brick complete all as specified.

Demolition of unreinforced cement concrete in ground floors and paving n.exc 15cm thickness(below or above ground level) complete all as specified and directed by Engineer-in-Charge.

Surface excavation n. exc 30cm deep and averaging 15cm deep and getting out in soft and loose soil complete all as specified.

M & L for moorum/ red bajri filling in foundation, under floors or paving, laid in layers n. exc. 30cm thick, spread, levelled and rammed including watering complete all as specified.

M & L for brick work with sub class - B bricks , straight or curved on plan exc 6 m mean radius , built in C M in 1:4 complete all as specified.

M & L 10 mm thick rendering on fair faces of brick walls in CM 1:6 , finished fair & smooth w/o using extra cement complete all as specified.

M & L 10 mm thick screed plaster on fair faces of brick walls in CM 1:4 for fixing of tiles, Kota stones in dados or skirting etc complete all as specified.

M & L 15 mm thick rendering on other than fair faces of brick walls in two layers, 1st layer 10mm thick in CM 1:6 and 2nd layer in CM 1:4 with using water proofing compound, finished fair & smooth w/o using extra cement.( WPC to be measured separately under respective item)

M & L 5 mm thick rendering on concrete surfaces such as sides of roof beams, soffits of roof slab etc in CM 1:3 , finished fair & smooth w/o using extra cement complete all as specified.

Supply only water proofing compound complete all as specified.

M & L PCC 1:4:8 type D-2 using 40mm graded aggregate as in 75mm thick sub base complete all as specified.

M&L for 20mm thick screed bed or bedding layer in CM 1:4 for laying Kota stone flooring. Kota stone complete all as specified.

M&L for 10mm thick screed bed or bedding layer in CM 1:4 for laying tile flooring complete all as specified.

M&L machine cut Kota stone slab flooring 20-25mm thick as in floor, laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab incl. Rubbing and polishing with mirror polish complete all as specified and complete.

M&L machine cut Kota stone slab in single piece on treads of steps, 20-25mm thick , laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab incl. Rubbing and polishing with mirror polish complete all as specified and complete complete all as specified.

M&L machine cut Kota stone slab , 10-15mm thick on vertical surfaces such as skirting , risers of steps etc laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab incl. Rubbing and polishing complete all as specified.

M & L for 50mm thick PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in foot path, finished even and fair complete all as specified.

M&L for 25mm thick PCC (1:2:4),typeB-0, using 12.5 mm graded stone aggregate as in floor complete all as specified & directed.

M&L for non skid coloured ceramic tiles of size 300x300x7mm thick in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of the tiles complete all as specified.

M&L for glazed ceramic coloured tiles of size 300 x200 x7mm thick on vertical surfaces of wall such as skirting,dados etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of the tiles complete all as specified..

S & F machine pressed precast concrete inter locking paver block any shape and size confirming to IS 15658-2006 of 60 MM thick with gray cement and pigment over 25 mm thick sand cushioning complete all as specified.

Complete removal of existing treatment and M & L two coat of OBD over one coate of 1 mm thick birla putty incluiding preparation of surfaces complete as specified & directed

M & L for preparation of old plastered surfaces of ceiling and applying two coats of white wash complete as specified & directed

Complete removal of existing treatment of old plastered surfaces of walls, Chajjas, etc and applying two coat of cement base paint of approved shade complete all as specified and directed by Engineer-in-Charge.

M & L for preparation of old wooden surfaces of any description , not otherwise described ,over 10 CM width or girth and applying two coats of synthatic enamel paint complete all as specified.

M & L for preparation of old steel surfaces of any description not otherwise described over 10 CM width or girth and applying two coats of synthatic enamel paint complete all as specified.

M & L for preparation of newly plastered surfaces of walls and applying three coats of white wash complete as specified & directed

M & L two coats of oil emulsion distemper over 1 mm thick white putty ( Birla/ JK ) including preparation of new plastered surface of walls complete all as specified.

M & L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete as specified & directed

M & L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint complete all as specified.

M&L for preparation of new wooden surface over 10cm width or grith & applying two coats of synthetic enamel paint of 1st quality over a coat of pink primer complete all as specified & directed

M&L for preparation of new steel & Iron surface of width or grith exceeding 10cm & applying two coats of synthetic enamel paint of 1st quality complete all as specified & directed.

M&L for rolled mild steel work angle iron as in door frames / chowkhats including provn of 12mm dia deformed bar welded horizentaly to bottom of frme grade Fe-290 incl preparing back of chowkat and applying two coats of tar & sanding newly fair surfaces with clean sharp sand paper complete all as spd & directed.

S&F IInd class hard wood hollock (terminalia Myriocapra) 35 mm thick, factory made, plain, framed, paneled shutters (two panels) of 9 mm thick BWP marine grade plywood bonded with high quality liquid phenol formal dehyde synthetic resin adhesive of conforming to IS 710. The sized of rails and styles shall be as per IS 1003 (Part I) Kiln seasoned as per IS 1141 and chemically pressure treated as per IS 401 complete all as specified and directed.

S & F for factory made solid panel PVC door shutters 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struk inside with solvent cement for styles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the styles and rails with suitable PVC sheet beading and jointed together with solvent cement, as per specifications and drawings given on page No 146 of SSr part-I of 2004 complete.

S&F mild steel barrel tower bolt 200 mm long stove enamelled black with bright bolt complete all as specified and directed.

S & F aluminium anodized barrel tower bolt of extruded section, 150 mm long complete all as specified & directed

S&F mild steel sliding door bolts,bolt type 300mm long stove enamelled black with bright bolt not less than 16mm dia with & incl a minimum of 6 bolts & nuts four on bolt plate and two on staple plate complete all as specified & directed.

S & F mild steel butt hinges medium weight cold rolled ISI marked of size 100 mm complete all as specified and directed.

S & F stainless steel butt hinges medium weight cold rolled ISI marked of size 100 mm complete all as specified and directed.

S&F mild steel pressed bow handle 125mm size, oval type stove enamelled black complete all as spd & directed

M & L for PCC 1:2:4, type B-1, using 20mm graded crushed stone aggregate as in bed plates , bed blocks etc for embedding hold fasts complete all as specified.

S & F factory made steel windows with side hung shutters including box type hinges with steel handles & steel pag stay complete with glazing bars,dovetailed or welded incl fixing of lugs in PCC (1:2:4) type B-I (using 20mm graded stone aggregate) & making good walls & cills to match the existing complete all as specified & directed.

S&F factory made steel ventilator with top hung shutters incl. box type hinges with steel peg stay complete including fixing of hugs in PCC 1:2:4 type B-1 & making good walls & cills to match the existing surface complete all as specified & directed.

M&L for 3mm thick figured glass pin head type and glazing with oil putty in squares not exc. 0.5 Sqm in each pane complete all specified and as directed by Engineer-in-Charge

M&L for MS framed guard bars,welded to steel windows/ventilators complete all as specified & directed.

S & F Vitereous china squatting pan,'Orissa' pattern of size 580mm x440mm,white with integral foot rests with CI 'P' trap, front or back inlet (excluding flushing cistern and flush pipe) but including connection to trap,flush pipe, and syphonage pipe etc all as specified & directed.

Supply only 10 litres capacity PVC valve less, syphonic action type flushing cistern, low level, coloured with inlet, ball valve, float and handle including Drilling holes & fixed on wall with PVC rawl plug of suitable size including conection to pipe complete all as specified.

S&F vitreous china wash hand basin, coloured, flat back of size 550x400mm including one 32 mm dia waste fitting brass, chromium plated with long screwed shank and fly nuts, flanged end bedded in run lead and other end fixed, one No. 15 mm bore pillar tap, cast copper alloy with capstan heads, chromium plated, screwed down, high pressure with or without lettered HOT or COLD with long screwed shanks and fly nuts, screwed for iron pipe, one No. 25 mm dia 750 mm long PVC waste pipe with 32 mm dia connector including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed by Engr-in-charge.

S&F water tubing 15mm bore, medium weight ISI marked galvanized with all fittings & fixed to walls, ceiling or laid in floors complete all as specified & directed.

S&F water tubing 20mm bore, medium weight ISI marked galvanized with all fittings & fixed to walls, ceiling or laid in floors complete all as specified & directed.

Refixing old steel tubing 15mm bore, medium weight ISI marked galvanized with all fittings & fixed to walls, ceiling or laid in floors complete all as specified & directed.

Refixing old steel tubing 20mm bore, medium weight ISI marked galvanized with all fittings & fixed to walls, ceiling or laid in floors complete all as specified & directed.

S&F ISI marked rotational moulded double layer polyethylene water storage tank (cylindrical vertical with closed top) 500 litres hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed by Engineer-in-Charge.

S&F 15mm bore cast copper alloy, bib tap with crutch or butterfly handle screwed down, screwed for iron pipe or brass ferrule complete all as specified.

S&F stop valve , angular type, cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union 15mm dia, ISI marked complete all as specified & directed

S&F stop valve cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union 20mm dia, ISI marked complete all as specified d & directed

S&F grating doom CP 750mm dia of platedwith waste hole complete all as specified.

S & F 75 mm bore CI (sand cast) soil ,waste and vent pipe , in any length without ears, with cement joint , laid in floors complete all as specified.

S & F 100 mm bore CI (sand cast) soil ,waste and vent pipe , in any length without ears, with cement joint , laid in floors complete all as specified.

S & F 75 mm bore CI bends (any radius) fixed to walls with cement joint complete all as specified.

S & F 100mm bore CI bends (any radius) fixed to walls with cement joint complete all as specified.

S & F 150x150 mm size SGSW gully traps, square mouthed, type 'P' complete all as specified.

Excavating in trenches n exc 1.50 m in width and n exc 1.50 m in depth for foundation, manholes etc as well as n exc 10 sqm on plan area and getting out in soft/loose soil all as specified and directed.

M & L for PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in bed to drain pipe including packing under and haunching against the sides of pipes after they are laid and tested complete for 150mm bore pipes complete all as specified and directed by Engineer-in-Charge

M&L for 150mm bore salt glazed stoneware drain pipe laid in trenched and jointed specified complete all as specified and directed by Engineer-in-Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25cm in soft/loose soil complete all as specified and directed by Engineer-in-Charge

Removal of excavated soft rock to a distance exc 50 m but n. exc. 250m and depositing where as directed at a level n exc 1.50m above the starting point complete all as specified and directed.

Excavation in post holes in soft/loose soil, each n. exc. 0.50cum, getting out , returning, filling in and ramming moorum or broken rubble mixed with moorum in layers n. exc. 25 cm thick, watering, and removing excavated soil to a distance n. exc. 50m and making good surfaces complete all as specified.

M&L for PCC 1:4:8 , type D-2, using 40mm graded stone aggregate as in filling and erecting posts complete all as specified.

Mild steel work as in angle iron (50x50x6mm) fencing posts, struts including cutting, tops to shape as directed, bent to shape, drilling holes, notching for wire etc including all necessary bolting or riveting etc and embedding in concrete complete. Note:- Earth work and concrete shall be measured and paid for separately under respective item of this schedule complete all as specified.

Mild steel flat iron (40x6mm) supports for posts/struts for securing fencing (chain link) using MS rods including drilling holes, notching for wire etc complete all as specified.

Mild steel screw bolts (machine made) of 10 mm dia of sank withhexagonal or squre head at one end & screw the other or screwed both end (as directed)each screwed end to be fitted with washer and one hexagonal or square nut n exc 5 cm long complete all as specified.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts etc including provision of binding wire . Note:- Supply of chain link and mild steel galvanised line wire shall be measured and paid separately under respective item of this schedule complete all as specified.

Supply only chain link MS galvanised fencing of size 100x100mm, 3mm dia complete all as specified.

Supply only 4mm dia plain mild steel wire, galvanised class 3 , in fencing including straining and fixing to steel posts and/or to straining bolts as directed. (each line of wire to be measured) complete all as specified.

Demolition of reinforced cement concrete in roofs, floors (other than ground floors) eams, staircases, landing, chajjas, and similar suspended work complete all as specified and directed.

S & F formwork to side and soffits of floor and roof beam, beam haunching, girders, bressumers, lintels, cantilevers, shelves including supports, overhang etc. also splays between floor and roof beam etc. for flat rough finished surface of concrete complete all as specified and directed.

M&L for formwork to sides of concrete foundations, footings, raft beam etc all as specified

M&L for Reinforced Cement concrete Type B1 1:2:4 (20 mm graded aggregate) ( nominal mix ) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under reamed piles and mass concrete complete all as specified.

Form work to sides of pillars, posts columns etc for fair finished faces all as specified.

M&L Reinforced Cement concrete Type B1 1:2:4 (20 mm graded aggregate)( nominal mix) in slabs supported on walls, beams and columns , in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified.

M&L for formwork to soffits of suspended slabs, such as roof slabs, floor slabs, landings and similar work not exceeding 200 mm thick [Horizontal or sloping] for fair finished faces complete all as specified.

M&L Reinforced Cement concrete Type B1 1:2:4 (20 mm graded aggregate) (nominal mix) in chajjas complete all as specified.

M&L 50 mm Precast cement concrete type B-1 , 1:2:4 ( 20 mm graded aggregate) slab flooring, bedded , and jointed in cement mortar 1:6 and pointed in cement mortar 1:3 complete all as specified.

M&L Mild steel TMT bars 10mm dia and over, cut to length bent to shape required including crancking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L Mild steel TMT bars 6mm to 8mm dia, cut to length bent to shape required including crancking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Ajanta Associates

M/s Anil Arora

M/S AMARJIT SINGH

Shree Tirupati Associates