SUPPLY OF FABRICATED HALF CIRCULAR STRAIGHT AND BEND TYPES SHIELDING PLATE (SS-304) FOR DIFFERENT LOCATION OF BOILER OF 2X600 MW, KaTPP, RVUNL, JHALAWAR

Shielding plate for PSH inlet header tubes with clamp (1 set= 1 No. shielding plate and 2 nos. clamp) Half circular outer 45° bend type Shielding plate, tube size(ф57X7mm), Plate length=400 mm, Plate Height=150mm, Plate thickness =2.5mm , Plate periphery dimension (ᴨD/2=90mm), Bend angle=45° and Clamp size- thickness= 2.5 and OD= 68 mm

Shielding plate for PSH inlet header tubes with clamp (1 set= 1 No. shielding plate and 2 nos. clamp) Half circular inner 90° bend type Shielding plate, tube size (ф57X7mm), Plate length=400 mm, Plate Height=150mm, Plate thickness =2.5mm , Plate periphery dimension (ᴨD/2=90mm), Bend angle=90° Clamp size- thickness= 2.5 and OD= 68 mm

Shielding plate for final Reheater (FRH) tubes with clamp (1 set= 1 No. shielding plate and 2 nos. clamp) Half circular inner 90° bend type Shielding plate, tube size (ф57X4.5mm),Plate length=1000 mm, Plate Height=200 mm, Plate thickness= 2.5mm , Plate periphery dimension (ᴨD/2=90 mm), Bend angle=90° Clamp size- thickness= 2.5 and OD= 68 mm

Shielding plate for front HRA tubes with clamp (1 set= 1 No. shielding plate and 2 nos. clamp) Half Circular S-type bend shielding plate, tube size(ф44.5X5.5mm)Plate length=800mm, Plate thickness =2.5 mm, Plate periphery dimension (ᴨD/2=70mm), Bend angle=22.5˚X 2, Clamp size- thickness= 2.5 and OD= 55.5 mm

Shielding plate for front HRA tubes with clamp (1 set= 1 No. shielding plate and 2 nos. clamp) Half Circular Straight- shielding plate, tube size(ф44.5X5.5mm)Plate length=1500 mm, Plate thickness =2.5 mm , Plate periphery dimension (ᴨD/2=70mm), Clamp size- thickness= 2.5 and OD= 55.5 mm

Shielding plate for LTSH upper & lower banks with clamp (1 set= 1 No. shielding plate and 2 nos. clamp) Half circular straight type Shielding plate, tube size(ф57X7mm), Plate length=1500 mm, Plate thickness= 2.5mm, Plate periphery dimension (ᴨD/2=90 mm), Clamp size- thickness= 2.5 and OD= 68 mm

Shielding plate for economizer upper & lower banks with clamp (1 set= 1 No. shielding plate and 2 nos. clamp) Half circular straight type Shielding plate, tube size(ф51X6mm), Plate length=1500 mm, Plate thickness= 2.5mm, Plate periphery dimension (ᴨD/2=80 mm), Clamp size- thickness= 2.5 and OD= 62 mm

Shielding plate for economizer upper & lower banks with clamp (1 set= 1 No. shielding plate and 2 nos. clamp) Half circular Outer L-type / 90° bend Shielding plate, tube size(ф51X6mm), Plate length=800 mm, Plate Height=200 mm, Plate thickness= 2.5mm, Plate periphery dimension (ᴨD/2=80 mm), Bend angle=90°, Clamp size- thickness= 2.5 and OD= 62 mm

Shielding plate for economizer intermediate banks with clamp (1 set= 1 No. shielding plate and 2 nos. clamp) Half circular inner L-type 90° bend Shielding plate, tube size(ф51X6mm), Plate length=1500 mm, Plate Height=400 mm, Plate thickness= 2.5mm, Plate periphery dimension (ᴨD/2=80 mm), Bend angle=90°, Clamp size- thickness= 2.5 and OD= 62 mm

Shielding plate for water wall screen tubes (Water wall extended tube) with clamp (1 set= 1 No. shielding plate and 2 nos. clamp) Half circular straight type Shielding plate, tube size(ф66.7X8mm), Plate length=1500 mm, Plate thickness= 2.5mm, Plate periphery dimension(ᴨD/2=104 mm), Clamp size- thickness= 2.5 and OD= 77.7 mm

Shielding for intermediate LTSH with clamp (1 set= 1 No. shielding plate and 2 nos. clamp) for soot blowing zone Half circular inner L-type 90° bend type Shielding plate, tube size (ф57X7mm), Plate length=800 mm, Plate Height=400 mm, Plate thickness =2.5mm , Plate periphery dimension (ᴨD/2=90mm), Bend angle=90°, Clamp size- thickness= 2.5 and OD= 68 mm

Shielding for Economizer with clamp (1 set= 1 No. shielding plate and 2 nos. clamp) Half circular inner 90° bend type Shielding plate, tube size(ф51X6mm), Plate length=800 mm, Plate Height=300 mm, Plate thickness= 2.5mm, Plate periphery dimension (ᴨD/2=80 mm), Clamp size- thickness= 2.5 and OD= 62 mm

Shielding for Economizer inlet header with clamp (1 set= 1 No. shielding plate and 2 nos. clamp) Half circular outer 45° bend type Shielding plate, tube size(ф51X6mm), Plate length=1000 mm, Plate Height=200 mm, Plate thickness= 2.5mm, Plate periphery dimension (ᴨD/2=80 mm), Clamp size- thickness= 2.5 and OD= 62 mm

Shielding plate for Water wall Hanger tube with clamp (1 set= 1 No. shielding plate and 2 nos. clamp) Half circular straight type Shielding plate, tube size(ф82.5X11mm), Plate length=2000 mm, Plate thickness= 2.5mm, Plate periphery dimension (ᴨD/2=130 mm), Clamp size- thickness= 2.5 and OD= 93.5 mm

Shielding plate for Front HRA near roof header with clamp (1 set= 1 No. shielding plate and 2 nos. clamp) Half Circular Ɔ-type bend shielding plate, tube size(ф44.5X5.5mm) Plate length=800mm, Plate thickness =2.5 mm, Plate periphery dimension (ᴨD/2=70mm), Clamp size- thickness= 2.5 and OD= 55.5 mm

Shielding plate for LTSH Intermediate (upper side 90° bend with Straight length shielding) with clamp (1 set= 1 No. shielding plate and 2 nos. clamp) Half circular 90° bend type Shielding plate, tube size(ф57X7mm), Plate length=1000 mm, Plate Height=400 mm, Plate thickness =2.5mm , Plate periphery dimension (ᴨD/2=90mm), Bend angle=90°, Clamp size- thickness= 2.5 and OD= 68 mm

Shielding plate for LTSH Intermediate (lower side 90° bend with Straight length shielding) with clamp (1 set= 1 No. shielding plate and 2 nos. clamp) Half circular 90° bend type Shielding plate, tube size(ф57X7mm), Plate length=800 mm, Plate Height=300 mm, Plate thickness =2.5mm , Plate periphery dimension (ᴨD/2=90mm), Bend angle=90°, Clamp size- thickness= 2.5 and OD= 68 mm

Shielding plate for LTSH Intermediate (Near rear wall (Up)) with clamp (1 set= 1 No. shielding plate and 2 nos. clamp) Half circular outer 90° bend type Shielding plate, tube size(ф57X7mm), Plate length=1500 mm, Plate Height=300 mm, Plate thickness =2.5mm , Plate periphery dimension (ᴨD/2=90mm), Bend angle=90°, Clamp size- thickness= 2.5 and OD= 68 mm

Shielding plate for LTSH Offset bend (PSH inlet header) Left side with clamp (1 set= 1 No. shielding plate and 2 nos. clamp) Half circular Shielding plate, tube size(ф57X7mm), Plate thickness =2.5mm, Plate periphery dimension (ᴨD/2=90mm), Approximate Plate length=1000 mm, Clamp size- thickness= 2.5 and OD= 68 mm

Shielding plate for LTSH Offset bend (PSH inlet header) Right side with clamp (1 set= 1 No. shielding plate and 2 nos. clamp) Half circular Shielding plate, tube size(ф57X7mm), Plate thickness =2.5mm, Plate periphery dimension(ᴨD/2=90mm), Approximate Plate length=1000 mm, Clamp size- thickness= 2.5 and OD= 68 mm

Shielding plate for PLSH coil tubes with clamp (1 set= 1 No. shielding plate and 2 nos. clamp) for soot blower zone Half circular straight type Shielding plate, tube size(ф44.5x8mm), Plate length=1500 mm, Plate thickness =2.5mm, Plate periphery dimension (ᴨD/2=70mm), Clamp size- thickness= 2.5 and OD= 55.5 mm

Shielding plate for FSH coil tubes near soot blower area with clamp (1 set= 1 No. shielding plate and 2 nos. clamp) for soot blower zone Half circular straight type Shielding plate, tube size(ф51x8mm), Plate length=1500 mm, Plate thickness =2.5mm, Plate periphery dimension (ᴨD/2=80mm), Clamp size- thickness= 2.5 and OD= 62 mm

Shielding plate for FRH coil tubes near soot blower area with clamp (1 set= 1 No. shielding plate and 2 nos. clamp) for soot blower zone Half circular straight type Shielding plate, tube size(ф57x4.5mm), Plate length=1500 mm, Plate thickness =2.5mm, Plate periphery dimension(ᴨD/2=90mm), Clamp size- thickness= 2.5 and OD= 68 mm

Shielding for Economizer hanger tubes with clamp (1 set= 1 No. shielding plate and 2 nos. clamp) Half circular straight type Shielding plate, tube size(ф51X10mm), Plate length=1500 mm, Plate thickness= 2.5mm, Plate periphery dimension (ᴨD/2=80 mm), Clamp size- thickness= 2.5 and OD= 62 mm

TECHNO PLUS