Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.8 LAccepted-AOC 0 SALEHPUR KOTLA BSR ROAD PO DAHANA HAPUR HAPUR UTTAR PRADESH 245101 | HAPUR | UTTAR PRADESH | 245101 | L1 | Accepted-AOC BEING LOWEST | |
| 2 | L2₹27.3 L+₹43,640 (1.62%)Rejected-Finance | L2 | Rejected-Finance NOT BEING L1 BIDDER | |
| 3 | L3₹27.4 L+₹57,900 (2.16%)Rejected-Finance | L3 | Rejected-Finance NOT BEING L1 BIDDER | |
| 4 | L4₹27.7 L+₹79,210 (2.95%)Rejected-Finance | L4 | Rejected-Finance NOT BEING L1 BIDDER | |
| 5 | L5₹27.9 L+₹1.1 L (3.98%)Rejected-Finance 210 C RAM DASS KA HATA SADAR CANTT LUCKNOW UP PIN 226002 | LUCKNOW | LUCKNOW | UTTAR PRADESH | 226002 | L5 | Rejected-Finance NOT BEING L1 BIDDER |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
23 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) BKT
GE (AF) BKT LUCKNOW
REPAIR TO PLINTH, JOINT FILLING CRACK, REPAIR TO SIGN BOARD AND CONNECTED REPAIR OF AIR FIELD AREA AT AF STN BKT
2023_MES_607433_2
8729/BKT/E8
Open Tender
Civil Works
Item Rate
270 days
GE (AF) BKT
7 documents required · 7 mandatory
₹500
GE (AF) BKT
₹70,000
Yes
19 Dec 2023
6 Sept 2023
25 Sept 2023
6 Sept 2023
23 Sept 2023
9 Sept 2023
Amount
M & L for cutting the edges of existing joints with suitable machine by racking out old sealing compound from existing joints of tarmac of size 8mm wide and 25mm deep and as directed by special tools like cutting blades / grinder machines (use of hammers is prohibited as it damages the edges) and removing old filled sealing compound from the joints by means of compressed air using hand blower including disposal of the same to a distance of 500m from the edge of runway as directed and repair of joints by epoxy wherever required and fill the joints by mechanical means as per following process: - (i) Provision of Backup rod of 10mm dia suitable to be inserted in the joint tightly as specified. (ii) Provision of adequate masking tape on either sides of joint to avoid spillage on concrete surface before applying joint sealant and removing the same after sealing of joints. (iii) Supplying and filling of sealing compound properly for a depth of 15mm as specified after application of suitable primer as directed by Engineer-in-Charge. (The finished level of sealed joints shall be on an average 3 mm below the top surface of slabs.) NOTE: - Sealing compound shall be Bostik "Seal N flex -2k', 02 component (Base and Hardner) Bostik Polyurethane sealent of grey colour conforming to BS-5212 with minimum movement accommodation factor of + 30% when tested as per ASTM C-719 or equivalent product of M/S Choksey Chemicals Pvt. Ltd. or M/S STP Ltd. as approved. The sealent shall have shore A @ 25 degree centigrade =15 + 5 and as per manufacturer's instructions.
All asper item No 01 above but joints of width 10mm and 28 mm deep (alongwith 12 mm dia backup polyethylne rod)
All asper item No 01 above but joints of width 25mm and 45 mm deep (alongwith 30 mm dia backup polyethylne rod)
All asper item No 01 above but joints of width 08mm and 25 mm deep (alongwith 10 mm dia backup polyethylne rod) NOTE: - Sealing compound shall be Bostik "Seal N flex -1', single component Class 'A' Bostik Polyurethane sealent conforming to BS-5212 with minimum movement accommodation factor of +(-) 50% when tested as per ASTM C-920-87 & 98 or equivalent product of M/S Choksey Chemicals Pvt. Ltd. or M/S STP Ltd. as approved. The sealent shall have shore A hardness >/= 50 and as per manufacturer's instructions.
All asper item No 04 above but joints of width 10mm and 28 mm deep (alongwith 12 mm dia backup polyethylne rod)
All asper item No 04 above but joints of width 25mm and 45 mm deep (alongwith 30 mm dia backup polyethylne rod)
M & L for filling of pot holes of size 20mm dia and 20mm deep in concrete surface and filling as per following process:- (i) Cleaning of surface by means of wire brush and removing the dust by means of compressed air. (ii) Bostik ERM or equivalent product of M/S Choksey Chemicals Pvt. Ltd. or M/S STP Ltd as approved epoxy resin mortar as per manufacturer's instructions after application of epoxy resin primer with and including necessary form work complete all as specified and directed by Engr-in-Charge.
M & L for repair to concrete slab or pavement of existing damaged edges / spoiled edges to triangular / rectangular cross section,of width 15mm to 20mm and depth 30mm to 40mm , by machine cutting and removing all broken and loose material to a distance exc. 50 metres but not exc. 100 metres and cleaning the surface with compressed air to remove dust, dirt, loose sand / foreign material, washing the surface with acid solution and repairing surface / edge with Bostik ERM or equivalent product of M/S Choksey Chemicals Pvt. Ltd. or M/S STP Ltd as approved epoxy resin mortar as per manufacturer's instructions after application of epoxy resin primer with and including necessary form work complete all as specified and directed by Engr-in-Charge.
M & L for cutting the edges of any type of joints of width 8mm to 10mm and 30 mm deep by racking out old sealing compound from existing joints by means of compressed air and filled the joints with sealing compound grade 'B' after application of primer for the following size joints complete all as specified and directed.
Supply & fixing in repair visible sign board of area/size exceeding 1.80 sqm and not exc 3.15sqm each made from 4.00 mm thick engineering grade plastic (acralic Sheet) having monolithic structure to with stand,temperature variations from cold environment to sweltering hot condition sand to with stand high velocity winds,framed and braced with 40mm dia PVC pipe best qualty to with standhigh velocity wind pressure,with ht of bottom of board should be 45-60 cm above the ground level with best quaility structure including excavating in post holes of size30cmX30cmX45cm and embedded in PCC1:2:4 type B1using 20mm graded stone aggregate and making plinth around frame of width 600mm and length as required,including providing and applying and weather resistance coating,providing and pasting of new numerals/alphabets with retro reflective tape cutting it as computer plotter etc complete all as specified and directed
All as per item No 10 above but area not exc 0.80 sqm each complete all as specified and directed .
M&L preparation of old painted surface of any description over 10cm width or girth of concrete/plastered surface and applying one coat of synthetic enamel paint on signal square, wind sock at any ht etc complete all as specified and directed.
Demolition of cement Concrete surfaces of any description and in any position not other wise specifically provided for pavement of taxi track / runway / Disperasl area as directed.
M&L for 100mm thick PCC 1 :2:4 type B-2 (using 40mm graded stone aggregatea) in foundation filling or mass concrete with spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green complete all as specified and directed.
Taking down cement plaster from brick walls/stone walls etc of any description including racking out joints, hacking for key scrubbing down with water etc complete all as specified
M&L rendering 10mm thick cment mortar (1:4) on concrete surfaces,/brick of drain channel finished even and smooth without using extra cement on concrete/brick surface , complete all as specified and directed
Demolition of brick work/stone boulder masonry,built in cement mortor including all quions,arches, pillars etc complete all as specfied and directed .
Removing demolited concrete/brick work material exc 250 m but n.exc 500m and depositing where directed complete all as specfied and directed .
M&L for brick work with sub class`B'bricks straight or curved on plan exc 6mm eanradius built in CM 1:4 etc complete all as specfied and directed.
All as per item No 19 above but Except Brick complete all as specfied and directed..
M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished fair and even without using extra cement etc complete all as specified and directed
M & L for single component 'Aspha Flo' coal tar free signature grade Gilsonite modified Asphalt emulsion, special polymers and Adhesive streaming crack, joint stuffer to prevent cracks from forming into pot holes and filling of cracks and joints on asphaltic surface of the runway, shall be complete to be applied directly on damp pavement also and coverage shall be 24.20 mtr/Ltr for 6mm (width) x 6mm (depth) crack crack complete all as per manufactures instructions as specified and directed. (Make: M/S Srijan Systems Pvt Ltd or equavalent as approved by GE).
All as per item No 22 above but size of crack 13mm x 13mm and coverage 6.05m/Ltr complete all as per manufactures instructions as specified and directed. (Make: M/S Srijan Systems Pvt Ltd or equavalent as approved by GE).
H C CONSTRUCTION
smc system & services
M/s R K Associates
M/S PRATAP BUILDERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .