Special repair to building No. P-133/1 to P-133/3 OR Govt Md Accn, Udham Singh Enclave at Mil Stn Nabha under GE (South) Patiala

Amount

Taking down cement or cement lime plaster on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc.complete all as specified and directed by Engr-in-Charge.

M & L for 15mm thick ( in two layers of 10mm and 5mm thickness) cement pastering in cement mortar 1:4 and mixig the water proofing compound as per manufactures instructions on brick or concrete surface of wall finished fair and even without using extra cement complete all as specified and directed by Engr-in-Charge. Note : Water proofing compound shall be measured and paid saparately under item .

M&L 10mm thick cement plastering in cement mortar CM 1:6 finishing the surface even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

Complete removal of existing treatment of any type/description such as distempering work ,internal emulsion etc from internal/external surfaces of walls & ceiling with mechanical means/grinder including removal of material from site complete all as specified and directed by Engr-in-Charge.

M&L for applying acrylic thick wall care putty on internal/external surfaces of walls/ceilings/soffits(thickness vary from1.5to2.5mm as required for desired smoothness and levelling of surfaces in two or more layers)by us ingready made wall careputty including sand papering after filling the putty to make surface smooth and ready for receiving painting etc complete all as specified and directed by Engr-in-Charge.

Applying 02 coats of interior emulsion paint (white shade) @ 10 sq.m/litre/2 coats to ceiling surfaces over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed by Engr-in-Charge.

Applying 02 coats of exterior emulsion paint (light shade) @ 5 sq.m/litre/2 coats by using roller to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer @ 11 sq.m/litre/1 coat as recommended for under coat by manufacturer of exterior emulsion by using following brands of emulsion and primer complete all as specified and directed by Engr-in-Charge.

Supply only integral liquid water proofing compound ISI marked complete all as specified and directed by Engr-in-Charge.

Rendering 5mm thick in cement mortar 1:3 as on concrete surfaces in ceiling finished even and smooth without using extra cement all as specified and directed by Engr-in-Charge.

Preparation of new plastered or unplastered surfaces applying three coat of white wash on ceiling surfaces complete all as specified and directed by Engr-in-Charge.

Preparing old plastered surfaces of ceilings and applying one coat of white wash in all as specified and as directed by Engineer- in- charge.

Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed by Engr-in-Charge.

All as per srl item No 12 hereinbefore but n. exc 1.5 sqm each.

S&F Powder coated Pressed steel frames made of MS sheet of 1.25 mm thickness for doors with single rebate including necessary fixing lugs, hinges, lock strike plate, hold fasts ,filling PCC (1:3:6 Co) in chowkhats, PCC 1:2:4 B1 hold fast blocks etc., complete as specified,size 105x 60mm including cutting holes and making good reqd to shape for hold fast blocks for new frame complete all as specified and directed by Engr-in-Charge. Note :- Disturbed portion of existing floor /wall / tile / plaster etc duing fixing of chowkhats shall be repaired to match with existing finish .Cost of the same will be included in this item.

S&F Powder coated Pressed steel frames made of MS sheet of 1.25 mm thickness for doors with double rebate including necessary fixing lugs, hinges, lock strike plate, hold fasts ,filling PCC (1:3:6 Co) in chowkhats , PCC 1:2:4 B1 hold fast blocks etc., complete as specified,size 125x 60mm including cutting holes and making good reqd to shape for hold fast blocks for new frame complete all as specified and directed by Engr-in-Charge. Note :- Disturbed portion of existing floor /wall / tile / plaster etc duing fixing of chowkhats shall be repaired to match with existing finish .Cost of the same will be included in this item.

S&F 35mm thick plain framed (Factory made) Panelled shutters of 2nd class HW with lock rail and panels of 9mm B.W.P commercial ply including beading on the facing side of shutters as per SSR Part I clause No 8.17.5. The size of rail and stiles as per IS 1003 (Part I) kiln seasoned and chemically pressure treated complete all as specified and directed by Engr-in-Charge.

S&F 35mm 2nd class hard wood Glazed and skeleton shutters, 2nd class hard wood open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats

S&F Mild steel barrel tower bolt 200mm long stove enamelled black with bright bolt and fixed complete all as specified and directed by Engr-in-Charge.

S&F Mild steel sliding door bolt of size 250mm , stove enamelled black with bright bolt not less than 16mm dia, with and including a minimum of 6 bolts and nuts, complete all as specified and directed by Engr-in-Charge.

S&F MS pressed handles of size 125mm oval type stove enamelled black complete all as specified and directed by Engr-in-Charge.

S&F Mild steel butt hinges of size 100mm medium weight cold rolled complete all as specified and directed by Engr-in-Charge.

S&F Mild steel butt hinges of size 50mm medium weight cold rolled complete all as specified and directed by Engr-in-Charge.

S&F 300 mm long MS rat tail pattern spring hinge including roller and roller plate, complete all as specified and directed by Engr-in-Charge.

Factory made steel windows box type using ERW hollow 'P' section comprising double frame for glaged and gauged skelton shutters jointed interally with flat iron 40x4mm complete including grill of 8mm square bar, fixed horrizontally @ 10cm centre to centre, hinges,handle tower bolts,lugs etc all as shown on drawing noTD-219(c) sheet 1/3 to 3/3 and TD-220 (c) sheet 1/3 to 3/3 as applicable complete all as specified and directed by Engr-in-Charge. Note:- (i) for the purpose of measurement& payment double shuttre with frame shall be considered as one unit. (ii) Glaging ,, wire mesh and glass, measured and paid for separately

S&F Steel ventilators fixed type with glazing bars complette all as specified and directed by Engr-in-Charge.

Sheet glass ordinary quality 4 mm thick and glazing with oil puttly or wooden beads in square not exceeding 0.5 sqm in each pane complete all as specified and directed by Engr-in-Charge.

S & F Wire netting of galvanised steel wire 1.40mm dia and size of mesh 25mm fixed with wooden beds tinned tacks of wire staples complete all as specified and directed by Engr-in-Charge.

Preparing of new surface of wood and wood based material of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel pain and one coat of pink primer all as specified and directed by Engr-in-Charge.

M&L for preparing surfaces of any description over 10 cm girth or width, not otherwise described and applying two coats of synthetic enamel paint over a coat of Red oxide on new surfaces of steel or iron, complete all as specified and directed by Engr-in-Charge.

M&L one coat of synthetic enamel paint to old steel surfaces including preparation in all as specified and directed by Engr-in-Charge.

Demolition of cement concrete (un-reinforced) in ground floors and pavings n exc 15cm thickness (below or above ground level), complete all as specified and directed by Engr-in-Charge.

Providing and Laying Premium (1st quality) straight edge, stain free, gloss finish, square marbonite single charged vitrified tiles in 600x600x 9 to 10mm thick in floors etc in approved shade, set & jointed in neat cement including and over 20mm in screed bed in CM (1:4) and pointed in white coloured cement to match, in floors etc. complete all as specified and directed by Engr-in- Charge.

M&L for anti-skid premium (1st) quality coloured tiles 300 X 300 mm and 7-8 mm thick, as in floors etc. in any pattern of light & dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc. over & including 20 mm thick screed in cement mortar (1:4) over and pointed in white cement with pigment to match the colour of tiles complete all as specified and as directed by Engr-in-Charge.

Providing and Laying ceramic glossy finish, joint free premium (1st) quality digitally printed straight edge, punched, glazed ceramic rectangle tile in approved shade and finish with flexural strength greater than 16 N/mm2, scratch hardness on Moh’s Scale minimum 3 and crazing resistance of 2 cycles in coloured tiles 600 X 300 mm and 8-9 mm thick, in any pattern of light & dark/highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified and as directed by Engr-in-Charge. Note : Dado should be flushed with the wall plastering.

S&F Built in steel cup board shutter made out pressed steel frame of size 75mmx45mmx1.25mm thick with prressed steel shutter 01mm thick Godrej pattern fixed to masonry wall by hold fasts made out of 25x3mm flat iron including mild steel CP hanging rod of 20mm dia with brackets fixed on inner sie of one leaf of shutter and on other leaf provision of mild steel CP peg set of 3 including spray painting with two coats of synthetic enemal paint over one coat of red oxide primer all around on steel surfaces of frame and shutter including taking down existing wooden cup board and making good disturbed portion in CM 1:3 or PCC 1:2:4 and 1.25 mm thick in frame work, cut to size, holes punched, welding, riveting, turning, bending etc. as require to made it in Godrej pattern complete all as specified and as directed by Engr-in-Charge.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs washers and wastes icluding bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915mm x 460mm bowl size 410mm x 330mm x 160mm.complete all as specified and directed by Engr-in - charge.

Taking up or down steel tubing of 15mm and removal to store complete all as specified and directed by Engr-in-Charge.

Taking up or down steel tubing of 20mm and removal to store complete all as specified and directed by Engr-in-Charge.

S&F medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 20 mm bore GI tubing complete all as specified and directed by Engr-in-Charge.

S&F in repair medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 15 mm bore GI tubing complete all as specified and directed by Engr-in-Charge.

S&F mild steel chromium plated 20mm curtain rod with fixing brackets, stops rollerss complete incl fixing brackets, stops etc all as specified & directed by Engr-in-Charge as in repair. (For the purpose of mesurement and payment running length of curtain rod only shall be considered.)

S&F 18 mm thick LEAD FREE PVC celuka ply of one side white and other side wooden finish color fixed with screws, slovent cement/adhesive to make kitchen/bed rooms cabinet sides top and bottom and shelves inside the cabinets complete as per manufactured's specification complete all as specified and directed by Engr-in-Charge. Note :- not less than 10kg per sqm

S&F 12 mm thick LEAD FREE PVC celuka ply of approved colour, fixed with screws, slovent cement/adhesive to make wall mount kitchen cabinets back and pull out drawer sides complete as per manufactured's specification complete all as specified and directed by Engr-in-Charge.

S&F 6 mm thick LEAD FREE PVC ply fixed with screwxed with screws, slovent cement/adhesive to make wall mount kitchen cabinets back and pull out drawer sides complete as per manufactured's specification complete all as specified and directed by Engr-in-Charge.

S&F tower bolts 150 mm long of stainless steel 304 finished/of outer plate metal matt finished complete in position all as specified by Engr-in-Charge.

S&F auto closing hinges 35 mm of 0 crank(KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete in all respect and fixed in postion all as specified by Engr-in-Charge.

S&F Ball bearing runners 45 mm Telescopic (KTS-20) full extension load capacity 50 Kg complete all as specified and directed by Engr-in-Charge.

S&F Paino/continuous hinge of size 30 mm stainless steel complete all as specified complete all as specified and directed by Engr-in-Charge.

S&F ball catchers 304 grade stainless steel finished suitable for cabinets premium quality complete fixed in position as per manufacture's instructions complete all as specified and directed by Engr-in-Charge.

S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 150 mm long matt finished complete fixed in position complete all as specified and directed by Engr-in-Charge.

S&F stainless steel 304 grade wire Basket (avg wait 2.5 to 4 Kg per basket) of pull out type like plain/cup& saucer/bottle/multi purpose/2-3 shelf baskets etc for kitchens of required suze complete fixed in position complete all as specified and directed by Engr-in-Charge.

S&F stainless steel 304 grade Basket Cutlery of size 370x485mm permium quality complete fixed in position complete all as specified and directed by Engr-in-Charge.

Dismantling of brick tiles or terracing tiles single layar on roofs complete all as specified and directed by Engr-in-Charge.

Demolation of mud puska on roof any thickness complete all as specified and directed by Engr-in-Charge.

M&L PCC 1:3:6, type B-0 using 12.5 mm graded stone aggregates as in padding over roof ,minimum thickness at khurra as 50mm maintain a slope of 1:100 using water proofing compound complete all as specified and directed by Engr-in-Charge.

Cutting grooves in brick wall ,75 mm wide and 65 mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed by Engr-in-Charge.

M&L PCC 1:2:4, type B-0 using 12.5 mm graded stone aggregates as in roof kerbs or mud stops/ coping etc including weathering slightly rounded or chamferred all as specified.

M&L for the following roof treatment. (a) 15 mm thick (average) cement screed/plaster in CM 1:4 on roof ( concrete surfces) finishing even and fair all as specified. (b) Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3mm thick weight not less than 3.60kg/Sqm water proofing membrane, black finished reinforced with non woven polyester matt, fixed as per manufacturer’s instructions complete all as specified and directed. (c) Applying one coat of bituminous primer confirming to IS-3384 @ 0.3 Ltr/Sqm. (d) Applying one coat of aluminium paint over APP membrane @ 0.50 litres per Sqm all as specified and directed. (e) Applying evenly a tack coat of industrial bitumen 85/25 @ 1.2 kg per square metre including cleaning the surfaces all as directed and specified.

M&L 30mm thick PVC door factory made solid panell shutters concisting of frame made out of MS tubes for top and bottom rails, MS frames shall be covered with hit moulded plain coulour PVC 'C' chanel having a PVC sheet strip of 20mm width stuck in side with screws complete all as specified and directed by Engr-in-Charge.

M&L Solid PVC door frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, fixed in opening as per specification and drawing complete all as specified and directed by Engr-in-Charge.

S&F 100 mm size PVC butt hinges complete all as specified and directed by Engr-in-Charge.

S&F 125MM PVC handles complete all as specified and directed by Engr-in-Charge.

S&F 200mm long PVC tower bolt complete all as specified and directed by Engr-in-Charge.

M&L PVC(SWR) Floor trap 75mm plain with CP grating including jointing to wate pipe with solvent cement complete all as specified and directed by Engr-in-Charge.

M&L PVC ( SWR) rain water pipes 110 mm bore single socketed in any length with rubber ring joints fixed to walls complete as as pecified including flat iror clamps 25x3mm complete all as specified and directed by Engr-in-Charge including taking out old damaged AC rain water pipes.

M&L PVC (SWR) bends of any radius for 110 mmdia rain water pipes with rubber ring joints a complete all as specified and directed by Engr-in-Charge.

M&L Rotational moulded polythene water storage tank cylindrical vertical with closed top 500ltr capacity hoisted and fixed in position incl demolition of exisiting Rcc tank and incl 20 mm bore ball brass valves high pressure with polythene float and fly nut all as specified in SSR Part-1 and directed by Engr-in-Charge.

S&F in repair 125mm Brass chromium plated shower rose complete all as specified and directed by Engr-in-Charge.

S&F in repair CP stop cock concelled cast copper alloy with crutch screwed down screwed for brass ferrule for 15 mm bore pipe after of any description complete all as specified and directed by Engr-in-Charge.

S&F in repair bib taps for 15 mm dia bore pipe cast copper alloy cromium plated with capstain head screwed down for iron pipe or brass ferrule and fixed complete all as specified and directed by Engr-in-Charge.

S&F in repair pillar taps hot and cold mixture Cast copper alloy fancy type 15mm bore , with capstan heads chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts scrrewed for iron pipe and fixed complete all as specified and directed by Engr-in-Charge.

S&F in repair stop cock cast copper alloy chromium plated fancy type ,high pressure with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule for 15 mm bore pipe after taking down old stop cock of any description complete all as specified and directed by Engr-in-Charge.

S&F in repair angle stop valve(Concealed type) cast copper alloy chromium plated with capstan head, long shank and cup screwed down screwed for iron pipe or for brass ferrule for 15 mm bore pipeafter taking down old stop cock of any description complete all as specified and directed by Engr-in-Charge.

M&L 450 mm long PVC connection with brass nuts on both ends for 15mm bore pipes of approved quality complete all as specified and directed by Engr-in-Charge.

M&L Viterous china, wash hand basin, white, flat back, size 550x400mm including PVC waste pipe 32mm bore and mild steel brackets, fixed all in repairs, including cutting for or pinning in brackets complete all as specified and directed by Engr-in-Charge.

M&L Tubular towel rail, CP 20mm dia, 60cm long between flanges fixed in repairs complete all as specified and directed by Engr-in-Charge..

S&F in repairs low level flushing cistern of PVC 10 ltr capicity incl 45cm long PVC connection with brass nut at both ends, 15 dia stop cock cast copper alloy,screwed both ends , high pressure(wt not less than as specified in SSR), PVC flush pipe 32 mm bore complete all as specified and directed by Engr-in-Charge.

M&L Viterous china ware wash down water closet Orrisa pattern size 580x440mm white with integral foot rests including connection to traps and to flushing pipe, anti syphonage pipe complete fixed in repair complete all as specified and directed by Engr-in-Charge.

M&L Hard core of broken bricks of gauge n exc. 63 mm spread and levelled in layers n exc.15cm thick, watered and rammed to a true surface complete all as specified and directed by Engr-in-Charge.

M&L PCC (1:3:6), 50mm thick as in PCC path/ plinth protection finished the surfaces even and smooth with out using extra cement complete all as specified and directed by Engr-in-Charge.

M&L 20mm thick black colure granite Machine cut as in border (Patti) laid over cement screed 15mm thick in CM 1:4 over and jointed with gray cement slurry mixed with pigment including rubbing and polishing complete all as specified and directed by Engr-in-Charge.

M&L Machine cut Kota stone slab flooring 20mm (+2mm) thick laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:4 as base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over 25mm thick cement concrete type B-0 (12.5mm graded aggregate) complete all as specified and directed by Engr-in-Charge.

All as per item No 83 here in before on vertical surfaces as in skirting/dado of size as required at site but excluding 25mm thick PCC complete all as specified and directed by Engr-in-Charge.

M&L Machine pressed precast concrete inter locking paver block any shape and size made of M-35 grade concrete (with grey cement and no pigment) of 60mm thickness with 6mm top layer of anti abrasive material laid over 25mm thick (compacted) fine sieved sand complete all as specified and directed by Engr-in-Charge.

M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base of flooring complete all as specified and directed by Engr-in-Charge..

S&F mild steel peg set of 6 fixed to wall with steel screws complete all as specified and directed by Engr-in-Charge.

S&F in repair Stainless steel wall mounted kitchen dish rack in 5 layer of size 600mm X300mm X 900 mm as complete all as specified and directed by Engr-in-Charge.

PVC enclosed case (cabin type) with cover and looking mirror over it with two shelves in it complete all as specified and directed by Engr-in-Charge and fixed with screws on wall.

S&F cast iron sand cast soil waste & vent pipe in any length with or without ears with cement joints laid in trenches or in floor of 100 mm bore with sand cast paper complete all as specified and directed by Engr-in-Charge.

S&F cast iron sand cast soil waste & vent pipe in any length with or without ears with cement joints laid in trenches or in floor of 75mm bore with sand cast paper complete all as specified and directed by Engr-in-Charge.

S&F cast iron 100mm sand cast vent cowl with cement joints bore with sand cast paper complete all as specified and directed by Engr-in-Charge.

S&F CI floor trap with grating including jointing to waste pipe in neat cement 75 mm dia fixed in cement concrete (1:2:4) type B1 complete all as specified and directed by Engr-in-Charge.

S&F CI P & S trap with grating including jointing to waste pipe in neat cement 100 mm dia fixed in cement concrete (1:2:4) type B1 complete all as specified and directed by Engr-in-Charge.

Demolition and breaking up 150mm drain pipes set in cement mortar (salt glazed stoneware/asbestos cement/reinforced) and removal of debris to low lying area to a distance not exceeding 100m, of the following sizes complete all as specified and directed by Engr-in-Charge.

M&L for150mm bore, cement concrete bed 1:3:6 type C2, using 40mm graded stone aggregate to drain pipes including packing under and haunching against the sides of pipes after they are laid and fitted for the following sizes:-

Excavation in trenches not exc 1.5m wide and not exc 1.5m in deep and getting out in hard / dense soil for foundations, etc or for shafts, wells, cesspits, manholes, pier holes, etc complete all as specified and directed by Engr-in-Charge.

Removing excavated material(soil) to a distance not exc 50mm and depositing where directed at a level n.exc 1.50m above the starting point complete all as specified and directed by Engr-in-Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick in soils complete all as specified and directed by Engr-in-Charge.

Demolition of brick work or stone masonry built in cement mortar including all quions, arches, pillers, etc complete all as specified and directed by Engr-in-Charge.

M&L for brick work in cm 1:4 with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius for manhole and septic tank/soakage well repair work complete all as specified and directed by Engr-in-Charge.

M&L for PCC 1:2:4, type B1, using 20mm size graded stone agregates as in bands, copings, etc., including necessary formwork complete all as specified and directed by Engr-in-Charge.

Demolition of reinforced cement concrete of any description (Reinforecement cut as required to facilitate demolition ) complete all as specified and directed by Engr-in-Charge.

M&L for precast RCC 1:2:4, type B-1 as in man hole cover slabs using 20mm graded stone aggregate and set in CM 1:4 including necessary form work complete all as specified and directed by Engr-in-Charge. Note : Reinforcement shall be measured and paid separately under item No. 104 below

M&L Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed by Engr-in-Charge.

M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L Reinforced concrete pipes, class NP2 laid and jointed complete with collars bore in pipes 150mm complete all as specified and directed by Engr-in-Charge.

Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete with fittings and fixtures such as switches, ceiling roses, pendants, regulators, socket, lamp holders brackets, bulk head fittings etc removing material for taking credit ( credit shall be recovered as per credit Sch attached) and also making good disturbed surfaces of wall, floors etc all as specified and as directed by the Engineer-in-Charge.

M&L for point wiring with 1.50 sqmm in copper conductor cable ( multistrand) FRLS single core PVC insulated cable in and including PVC concealed conduit ( ISI Marked) of heavy duly with all accessories ie PVC gutties etc terminated in sunken/pressed metal flush box and white modular cover plate with frame for mounting of switches /sockets/ fan regulators etc and continuous earth wire 1.5 Sqmm copper cable PVC insulated FRLS controlled by one switch for one light/fan/sockets point/ all as specified and directed by Engr-in-Charge in ceiling Portion surface conduit wiring to be done. . Note : i) Eye/bottle thimbles shall be used for connection in switches/sockets & MCB's in DB's without any extra cost ii) Electric rewiring should be done in proper colour coding i.e. Red for phase, Black for neutral and Green for Earth.iii) Neccessary cutting chasing wherever required and making good the disturbed surface shall be part of job at no extra cost.

All as per item No 109 above, but for one 3/5 pin socket outlet 5 Amp on independent board complete all as specified and as directed by the Engineer-in-Charge.

All as per item No 109 above, but for one 3/5 pin socket outlet 5 Amp on the same board with other switches complete all as specified and as directed by the Engineer-in-Charge.

All as per serial item No 109 here-in-before , but for one socket outlet 15 Amps on independent board with 2.5 Sqmm copper conductor ( Multi-stranded) PVC insulated and unsheating electric cable 1100 volts (ISI Marked) including PVC insulated and unsheathed electric cable 1100 volts 2.5 Sqmm copper stranded conductor as continuous earth wire connected to common earth dolly complete all as specified and as directed by Engineer-in-Charge.

M&L for Modular switch 1 way 6A, 1 module type complete all as specified and as directed by Engineer-in-Charge.

M&L for Modular switch 1 way 16A, 1 module type complete all as specified and as directed by Engineer-in-Charge.

M&L for Modular Socket, 6A - 5 pin 2 module type complete all as specified and as directed by Engineer-in-Charge.

M&L for Modular Socket 6A/16A - 2/3 pin 2 module type complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing LED light fittings 1 x 20 Watt, 220 V, AC decorative box type with driver, holder including LED tubelight connecting up with three core flexible copper conductor cable of size from ceiling rose complete all as specified and as directed by Engineer-in-Charge.

Material and labour for ceiling rose surface type, 65 mm x 50 mm two to three terminals / PVC / polycarbonate, isolated body fixed on PVC block complete all specified and as directed by the Engineer-in-Charge.

Material and labour for angular type lamp holder, PVC/ polycarbonate type with back plate suitable for 7 to 18 watts for batten fitting, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix LED Lamp LED new Adore 9W WW Ball Lamp LHLDERHEMD 8X007 9 watt complete all as specified and as directed by Engineer-in-Charge.

Supply and fix LED Lamp LED new Adore 15W WW Ball Lamp LHLDERHEMD 8X007 15 watt complete all as specified and as directed by Engineer-in-Charge.

S&F LED light fitting 1x9W/1X10W bulkhead luminaires 230 Volts including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified by Engr-in-Charge.

Material and labour for call bell ding dong AC 230 volt single pole complete all as specified and as directed by Engineer-in-Charge.

Material and labour for Modular Bell push 6A 1 module complete all as specified and as directed by Engineer-in-Charge.

M&L for Fan step regulator, 120W - 1 module complete all as specified and as directed by Engineer-in-Charge.

Refixing of dismantled existing ceiling Fan complete with accessories AC single phase 230V 1200 mm sweep all as directed by Engr-in-charge.

Refixing of dismantled existing exhaust fan any type AC single phase 230/ 240 V with louver complete all as specified and as directed by Engineer-in-Charge. Note : Fixing of Exhaust Fan on wall with suitable size anchor bolt, making hole in wall for groutng and making good the disturbed surface including plaster work shall be part of job at no extra cost.

M&L for making hole for fixing of ventilation fan of size 300 mm sweep PVC body with louvers all as directed by Engr-in-charge.

S&F Vertical three phase MCB distribution board powder coated double door flush mounted complete with locking arrangement suitable for 4 way VTPN, with MCCB of capacity 63 Amp FP as incomers and MCB's as out going with rated bus bar 200 Amp link 230 volt complete all as specified and as directed by Engineer-in-Charge. Note :- (i) The DB shall be flush fixed ,and making good the disturbed surface matching with existing specifications shall be part of job at no extra cost. (ii)connection of the MCCBs/ MCBs with cable shall be made through appropriate size pin /bottle type thimble -properly crimped. (iii) all the vacant holes of the DB shall be provided with blank plates of appropriate size. (iv) Making arrangement for protection of DB from rain..

Dismantling of existing sheet metal box from wall including SPN DB 8/12 Way and single Phase energy meter and masonry work to fill the space of iron sheet box and Refixing of SPN DB with MCBs & Energy Meter. MCB'S shall be fixed with new connection of copper wires FRLS 1.5/2.5 Sqmm incl appropriate size of brass/ Cooper thimble complete all as specified and as directed by Engineer-in-Charge..

Supply and fix in replacement of MCB SP up to 6-32 Amp complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in replacement of MCB SPN 6-32 Amp complete all as specified and as directed by Engineer-in-Charge.

M&L for Sub main wiring with 2 runs of single core FRLSH PVC insulated unsheathed multistranded copper conductor cable of size 2x6 sqmm ( line conductor) & 1x4 sqmm ( earth conductor), 1100 volt grade drawing in & including heavy duty non metallic PVC conduit , ISI marked, incl accessories not less than 25 mm in dia & concealed in wall, roof etc including PVC insulated, FRLSH unsheathed single core multistranded copper conductor cable, green in colour as earth conductor including cutting charges for concealed conduit wiring etc and making good cutting not exceeding 10 cm grith complete all as specified and as directed by Engineer-in-Charge. Note: (i) Electric rewiring should be done in proper colour coding i.e. Red for phase, Black for neutral and Green for Earth . (ii) Connections of cables with MCBs or bus bars shall be done through brass/copper thimbles of appropriate size . (iii) Two runs of copper conductor cable and one run of copper earth wire including PVC conduit will be measured and paid as one unit only.

Supply & lay in replacement of existing unserviceable XLPE insulated, armoured heavy dutyelectric cable with aluminium conductor, 1100 volt grade of crosssectional area 16 Sqmm 4 Core complete all as specified and as directed by Engineer-in-Charge.

Material and labour for sand cushioning with dry river sand in trenches for cushioning of underground cable line including spreading, leveling, well ramming complete all as specified and as directed by Engineer-in-Charge.

Supply and laying well burnt sub class ‘B’ bricks. ( designated 75) locally available best quality laid dry in trenches for protection of underground cable complete all as specified and as directed by Engineer-in-Charge.

Material and labour for replacement of GI tubing light grade 40 mm bore for passing through cables under the floor ,along the wall or along the pole complete all as specified and as directed by Engineer-in-Charge.

M&L for earthing complete with galvanized steel earth plate electrode 600x600x6mm tthick buried directly in ground(earth plate not less than 2.25 mtr deep below the normal ground level ) with top edge of plate not less than 1.5 mtr below the normal ground level connected to galvanized earth wire 4mm dia by means of nuts bolts,washers,check nuts of iron or steel including test point PCC pits and RCC cover in PCC 1:2:4 (type B-1) including iron angle frame 40*40*6mm. and medium grade GI watering pipe 20mm dia with funnel and wire mesh and 15 mm bore GI pipe light grade proection pipe including excavation and charcoal ,common salt surrounded with 15cm all around the plate all as specified and shown in EP-3 of SSR Part-I complete all as specified and as directed by Engineer-in-Charge.

NARINDER KUMAR SONS