WBPWD/EE/JED/eNIQ37/2022-23

Amount

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire(Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. 175mmx100mmx65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish.(avg run 10 mtr)

Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper B14wire as ECC, to 5A 3 pin flush type plug socket & Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. painting the MS box and mending good the damages to original finish(on board)

Fixing& replace only single/twin fluorescent/LED light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) upports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EIconduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length. {Page-C-2, 17}

Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit (14 SWG) supports & necy. PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length. {Page-C-2, 16}

Supply of the following items:

20W LED tube light, make-Phillips cat.no. : BN021C LED22S PSU CW GR-equivalent philips/havells/ Bajaj as per direction EIC) (NS)

40W LED tube light, make-Phillips cat no.-BN 021 LED40S- 6500 PSU GR Or equivalent philips/havells as per direction EIC) (NS)

12/10 W LED tube light (miror light), make-Philips cat no-BN021C LED12S PSU CW GR-equivalent philips/havells/ Bajaj as per direction EIC (NS)

Supply of ac celing fan.. (make -Usha striker plus/ Orient Quasar/ Crompton Greaves Zappar]

250v 1200 mm sweep (48") (NS)

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire {C-3, 21(a)}

Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connections {E-6, 18(a)}

Supplying & Fixing MS fan clam of two piece type for RC ceiling as per approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactory finishing and painting – (As per Drawing no. 475 of PWD Specification Book – May 1991) {D-14, 29}

Fixing only bulk head ceiling fitting on wall /ceiling by screws etc. {D-14, 29}

Supplying LED bulk head light fitting (Philips cat no.-WT202W LED6S NW PSU S2 PC/ CG cat no.- LBHP-10-CDL) (NS)

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter

a. 250V 9''dia {C-4, 28-a}

a. 250V 12''dia {C-4, 28-b}

Supply & Fixing louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long) AL

a. 250V 9''dia {D-14, 32-a}

b. 250V 12''dia{ D-14, 32-a}

Supply of Exhaust fan:

a. 250V 9''dia (make EPC / orient make heavy duty) (NS)

a. 250V 12''dia (make EPC / orient make heavy duty) (NS)

Supplying & Fixing 240 V AC/DC superior type Ding- dong Call Bell (Anchor) on HW board incl. S&F HW board.{ Page-D-13, 20(a)}

Supply & fixing 250 v 2no 3 pin 6 A flush type plug socket with 2no 6 A piano key type switch (Anchor make)switch on sheet metal box with bakelite top cover & earthing attachment incl S&F sheet metal box of size 175 mm x 100 mm x 65 mm (16 swg) with 3 mm thick bakelite top cover.

Supply & Fixing 240 V, 20A, plug socket with separate 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 150x100x65mm MS (16SWG) switch board and bakelite/ perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required

Supply & Fixing 240 V, 4 nos. 6A, plug socket with separate 4 nos. 6 A Piano key type switch, indicator & 16A kit-kat flush type fuse (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as requiredPage-E-7, 23

S&fixing 250 v 6 to 10 A per way , SPNMCBDB with SS enclosure double door with IP - 42/43 protection with 40A DP MCB isolator as incomer and 12 no 6-32A SPMCB (C - Curve 10 kA) as outgoing concealed in wall after cutting the wall & mending good the damages to original finish incl interconnection with suitable size of cupper wire & neutral link & provision of earthing attachment.. (MAKE-LEGRAND/ Crabtree/l&t/siemens) 2+ 12 way.D-9, 13/ D-6,. 7/D-5,6

S&fixing 250 v 6 to 10 A per way , SPNMCBDB with SS enclosure double door with IP - 42/43 protection with 40A DP MCB isolator as incomer and 4 no 6-32A SPMCB (C - Curve 10 kA) as outgoing concealed in wall after cutting the wall & mending good the damages to original finish incl interconnection with suitable size of cupper wire & neutral link & provision of earthing attachment.. (MAKE siemens/ Legrand/cabtree) 2+ 4 way.(for oute side kitchen){D-9, 13/ D-6,. 8/D-5,6}

Supply & fixing 415 v 16to 32 A per way , TPN MCBDB with ss enclosure double door with IP 42/43 protection with 63A FP MCB isolator as incomer and SPMCB (c curve 10 ka) as outgoing concealed in wall after cutting the wall & mending good the damages to original finish incl. interconnection with suitable size of cupper wire & neutral link & provision of earthing attachmens . 4 way,63 A FP MCB Isolator & 12 no 6-32A SPMCB (C-Curve 10 kA) (MAKE-legrand l&t/hagger/siemens){D-10, 14/D-5,6/D-6,7}

Distribution wiring in 1.1 KV single core stranded 'FR'PVC insulated & unsheathed copper wire (Finolex/Anchor/Havells/Kei Brand approved by EIC) in 20mm size PVC rigid conduit 'FR'(Precision make) incl. necy. fittings as required

a) 2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECCE-14, E-1(a)(i)

b. 2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECCE-14, E-1(a)(ii)

c. 2x84/0.3 (6 sqmm) + 1x56/0.3 (4 sqmm) as ECCE-14, E-1(a)(iv)

Supply & drawing 1.1 kv single core stranded 'FR' pvc insulated & unsheated single core stranded copper wire ( Finolex/Anchor/Havells/Kei Brand approved by EIC) in 2 nos 25mm size PVC rigid conduit 'FR'(Precision make) incl. necy. fittings as required

4X126/0.4(16 sqmm)+2x80/0.4(10 sqmm) as ECCE-9, C-1,g1

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.

2.5 sqmmF-5, 9(i)

4 sqmmF-5, 9(ii)

6 sqmmF-5, 9(iii)

10 sqmmF-5, 9(iv)

16 sqmmF-5, 9(v)

ROOF TOP

S& f of 45W Rooftop light (IP66) make-CG,CAT NO-LSTS-45-CDL-M /or equivqlent havells/PHILIPS as per direction of EIC. (NS)make-CG, cat page-62

Fixing only outdoor / street light type fluorescent light fitting or MV light fitting complete with all accessories to be fixed /projected from the wall of the building incl. making holes/providing clamping arrangement & necy. GI reducer as required. S&F 40 mm GI pipe (ISI-Medium) quality 1.5 mts. average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall incl. painting etcPasge no-C-3, 18

Supplying and Fixing GI water proof looping cable box having hinged GI Top Cover having 4 mm thick with rubber gasket lining, railway type mechanical locking arrangement, earthing terminal with lug etc. of the following sizes as indicated below, Comprising of one 250 V, 15 A Kit-Kat fuse unit, one NL on porcelain insulator etc. and housing the same in pole muffing incl. addition and alteration to the existing CC muffing (6:3:1) after dismantling the damaged looping cable box etc. where necy. incl. painting(200 x 150 x 100mm)(Roof Top Light and Glow Sign Board)I-2,16(a)

S& drawing from loop box to fitting by 3x1.5 sq. mm PVC insulated copper wire (Finolex 'FR') through MPVC/3mm thick Polythene pipe. (Roof Top Light and Glow Sign Board)E-1, A-1(e)

Supply and delivery of the following cable:

Supply & deliver of 2 core 6 sqmm 1.1 kV grade XLPE AL/A cable [havells/RR Kable/Polycab/Glosdtar/Mescab](rooftop & outer kitchen) (NS)From Gloster catalouge.

Laying of cable 2 core 6 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and paintingF-1,2(a)

Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammedF-2,1(a)

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below

a.2 core 6 sqmmF-4,7(a)

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials :

a.2 core 6 sqmmF-5,8(b)-ii

Supplying and fixing 32 A DP MCB Isolator (Legrand) on din rail of 2 way MCB SS enclosure and necessary connection.{D-9,11/D-5,6}

Supplying and fixing 415V, 63 A TPN SFU with sheet steel enclosure on angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating.(make-Standard/Havells/L&T as per direction of EIC) D-3,4(a)

Supplying and fixing 240V,15/16A Sheet steel Main Switches on flat iron frame on wall(make-Havells/Standard)D-1,1(a)

supply & fixing of 3ftx2ft 6mm Hylum/ bakelite board on wall with 4 no MS fastner & supply & fixing 3 nos 415V 100A kitkat fuse & neatrual link on board.NS

Excavation of soil for installation of Earth Electrode and filling & ramming[ morrum soil]G-1, 1(b)

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level (Tata medium)G-1, 2(a)

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required{G-2, 4(a)}

Connecting the equipments body to earth busbar including S & F 25 mm x 6 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etcG-3, 5(d)

Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as Required 32 mm dia F-6,11(b)

Supply and fixing 3 phase SPD type- 1 four pole Surge Protection Device(Make- L&T/approved, Cat No- AUSP123PN100) on Din rail with sheet steel enclosure box (Double door 6-way MCB DB Make: L&T) on wall with following details- Number of poles: 3 P Max discharge (Imax) or impulse (Iimp): 100 kA Number of modules: 4 Remote contact: no

Supply & drawing of the 1.1 kv, 4C 16 sq mm streamed, PVC insulated & unsheathed unarmoured Copper wire by PVC saddle/ clips as required and making connection with SPD as per the direction of E.I.C. (Make:- KEI /Mescab/ Glostar/Currency) (NS)From Gloster catalouge.

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below

4c16 sqmmF-4,7(c)

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials

4c16 sqmmF-5,8(b)-xii

Labour charges for making holes on busbar incl providing brass/GI nuts,bolts as applicable of adequate size, washers,spring washers etc as reqd. for SPD connection.

Jhargram Adivasi Hostel (Quarter)

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate and 2 no. suitable size “Ph & N” copper bar & earthing attachment fixed on wall incl. mending good damages to original finish.(avg run 8 mtr)E-24,I-1©

Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 6A 3 pin Modular type plug socket & switch (Brand approved by EIC) on 4 Module GI switch board with 3/4 Module top cover plate on wall incl. necy. connection making earthing attachment, painting and mending good damages to building works(on board)E-24,I-3(a)

Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.Page-C-2, 17

Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit (14 SWG) supports & necy. PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.Page-C-2, 16

Supply of the following items:

2 X 20W T8 LED tube light, make-CG, Cat no- IGP 161 LT8-16(BATTEN) & LT8-20-865-(2) 2 NO equivalent philips or Bajaj as per direction EIC) (NS)make CG,Page no -45

20W T8 LED tube light, make-CG, Cat no- IGP 161 LT8-16(BATTEN) & LT8-20-865-(2) equivalent philips or Bajaj as per direction EIC) (NS)make CG,Page no -45

12/10 W LED tube light (miror light), make-Philips cat no-BN021C LED12S PSU CW GR-equivalent philips/havells/ Bajaj as per direction EIC (NS)cat. Book-Philips, page-26

Supplying & Fixing MS fan clam of two piece type for RC ceiling as per approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactory finishing and painting – (As per Drawing no. 475 of PWD Specification Book – May 1991)D-14, 29

Supply of following Item:

a. 1200 mm(Usha striker plus/ orient quasar) (NS)From usha catalouge

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wireC-3, 21(a)

Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Brand approved by EIC) on existing Modular GI switch board with top cover plate incl. Making necy. connections etcE-18, 10

Supply only full metal body wall fan ( 400/450 mm ) .[ Make EPC/Orient/Ushai Full metal body] (NS)From usha catalouge

Fixing only cabin fan on wall/ceiling by S&F rag bolts, nuts & washers (6 mm dia x 62 mm long) or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. lengthC-4, 29

Fixing only bulk head ceiling fitting on wall /ceiling by screws etc.C-2, 13

Supplying LED bulk head light fitting (Philips cat no.-WT202W LED6S NW PSU S2 PC/ CG cat no.- LBHP-10-CDL) (NS)cat. Book-CG, page-44

Supply & Fixing angular batten holder (Anchor) on 75mm dia PVC round block / round bakelite on wall/ceiling.D-13, 22

Supply & fixing 9W LED Bulb (mke-CG/Philips/Bajaj as per direction of Eic)

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter

a. 250V 9''dia C-4, 28-a

b. 250V 12''dia C-4, 28-b

Supply & Fixing louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long) AL

a. 250V 9''dia D-14, 30-a

b. 250V 12''dia D-14, 30-a

Supply of Exhaust fan:

a. 250V 9''dia (make EPC / orient make heavy duty) (NS)From epc catalouge

b. 250V 12''dia (make EPC / orient make heavy duty) (NS)From epc catalouge

Supplying & Fixing 240 V AC/DC superior type Ding- dong Call Bell (Anchor) on HW board incl. S&F HW board.Page-D-13, 20(a)

Supply & fixing 250 v 2no 3 pin 6 A flush type plug socket with 2no 6 A modular switch (Anchor make)switch on 6 module GI box with 6 module top cover & earthing attachment. E-17,F-1(b)/E-17, F-3(a)/ E-17, F-4(a)

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.E-18, 9(b)

Supply & Fixing 240 V, 4 nos. 6 A, 3 pin Modular type plug socket with 4 nos. 6A Modular type switch (Brand approved by EIC), 16A Modular switch type MCB (C-Curve) and Indicator without plug top on 2 row 18 Module GI Modular type switch board with 2 row 18 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.E-18, 12

S&fixing 250 v 6 to 10 A per way , SPNMCBDB with SS enclosure double door with IP - 42/43 protection with 40A DP MCB isolator as incomer and 14 no 6-32A SPMCB (C - Curve 10 kA) as outgoing concealed in wall after cutting the wall & mending good the damages to original finish incl interconnection with suitable size of cupper wire & neutral link & provision of earthing attachment.. (MAKE L&T/ Crabtree/siemens) 2+ 14 way. (Super Quarter)D-9, 13/ D-6,. 7

S&fixing 250 v 6 to 10 A per way , SPNMCBDB with SS enclosure double door with IP - 42/43 protection with 40A DPMCB isolator as incomer and 8 no 6-32A SP MCB (C - Curve 10 ka) as outgoing concealed in wall after cutting the wall & mending good the damages to original finish incl interconnection with suitable size of cupper wire & neutral link & provision of earthing attachment.. (MAKE legrand/ Crabtree/l&t/siemens) 2+ 8 way.(A & B type quater)D-9, 13/ D-6,. 7

Supplying and fixing 32 A DPMCB Isolator on din rail of 2 way MCB SS Enclosure and necessary connection. (make- legrand/ L&T)D-9,11/D-5,6

Distribution wiring in 1.1 KV single core stranded 'FR'PVC insulated & unsheathed copper wire (Finolex/Anchor/Havells/Kei Brand approved by EIC) in 20mm size PVC rigid conduit 'FR'(Precision make) incl. necy. fittings as required

a) 2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECCE-14, E-1(a)(i)

b. 2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECCE-14, E-1(a)(ii)

c. 2x84/0.3 (6 sqmm) + 1x56/0.3 (4 sqmm) as ECCE-14, E-1(a)(iv)

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes.

2.5 sqmmF-5, 9(i)

4 sqmmF-5, 9(ii)

6 sqmmF-5, 9(iii)

S& f of 30W Rooftop light (IP66) . CG make cat no.-LSTS-30-CDL-M/or equivalent make-Philips/Havells as per direction EIC.( ROOF TOP LIGHT) (NS)

Fixing only outdoor / street light type fluorescent light fitting or MV light fitting complete with all accessories to be fixed /projected from the wall of the building incl. making holes/providing clamping arrangement & necy. GI reducer as required. S&F 40 mm GI pipe (ISI-Medium) quality 1.5 mts. average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall incl. painting etcPasge no-C-3, 18

Supplying and Fixing GI water proof looping cable box having hinged GI Top Cover having 4 mm thick with rubber gasket lining, railway type mechanical locking arrangement, earthing terminal with lug etc. of the following sizes as indicated below, Comprising of one 250 V, 15 A Kit-Kat fuse unit, one NL on porcelain insulator etc. and housing the same in pole muffing incl. addition and alteration to the existing CC muffing (6:3:1) after dismantling the damaged looping cable box etc. where necy. incl. painting(200 x 150 x 100mm)(Roof Top Light and Glow Sign Board)I-2,16(a)

Supply & Fixing 240 V 16 A Modular type switch (Brand approved by EIC) on 2 module GI Modular type switch board having top cover plate and making necessary connections as required(for Roof Top Light)E-17, F-2(a) &3(b)

S& drawing from loop box to fitting by 3x1.5 sq. mm PVC insulated copper wire (Finolex 'FR') through MPVC/3mm thick Polythene pipe. (Roof Top Light )E-1, A-1(e)

Supply & deliver of 1.1 kV grade XLPE AL/A cable(make-KEI/Polycab/Glostar/Havells)

a. 2 core 4 sqmm al/a xlpe (make polycab/ havells/gloster)[for Roof Top light + Bathroom] (NS)

b.4 core 6 sqmm(for Pump) (NS)

Laying of cable upto 2 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting

2 core 4 sqmm F-1, 2 (a)

Laying of cable upto 3/4 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and paintingF-1, 2 (b)

Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammedF-2, 1 (a)

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below

a.2 core 4 sqmm(For Roof Top)F-4, 7(a)

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials :

b.2 core 4 sqmm(For Roof Top)F-5,8(b)-i

Supplying and fixing 240V, 32 A DP with fuse on L&N,Sheet steel Main Switches on flat iron frame on wall.(make-Standard/ Havells/Anchor)D-1, 1(a)

Supplying and fixing 240V, 16 A DP with fuse on L&N,Sheet steel Main Switches on flat iron frame on wall also interlink with existing busbar on hostel building as per direction of EIC.(make-Standard/ Havells/Anchor){for Pump}D-1, 1(a)

supply & fixing of 1ftx1ft 12 mm Hylum/ bakelite board on wall with 4 no MS fastner & supply & fixing 1 nos 415V, 32A kitkat fuse & neatrual link on board.NS

Excavation of soil for installation of Earth Electrode and filling & ramming.(morrum soil)G-1, 1(b)

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level (tata/isi medium)G-1, 2(a)

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as requiredG-2, 4(a)

Connecting the equipments body to earth busbar including S & F 25 mm x 6 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc.G-3, 5(d)

S&F Submersible Pump Controller-1 Hp,0.75 Kw,Relay Max Range- 9-14A,(Cat no- SS96560., make L&T)

Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as Required 32 mm dia F-6,11(b)

SREE KRISHNA ELECTRICAL

BANERJEE CONCERN