Re- Tender for Development of sports facilities such as indoor sports complex, swimming pool, outdoor sports arena, supply and fixing of different

Excavating, supplying and filling of local earth (including royalty) by

mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches,

plinth, sides of foundation etc. complete. Cum 360.000 700.50 2,52,180.00

Supplying and filling in plinth with sand under floors, including watering,ramming, consolidating and dressing complete.

Surface dressing of the ground including removing vegetation and in-equalities

2.28 not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up

2.34 Supplying chemical emulsion in sealed containers including delivery as specified.

2.34.1 Chlorpyriphos/ Lindane emulsifiable concentrate of 20% ltr 216.270 234.75 50,769.38

Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of

2.35.2.1 chemical emulsion) : Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per RMT 96.120 53.45 5,137.61

linear metre including drilling and plugging holes etc. With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration

Digitally signed by ARTI

DSR-2023 Unit AMOUNT

DSR 2023 RATE/NS

item no./MS DESCRIPTION OF ITEM QTY

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to

plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from

natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)

4.1.8 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from

natural sources)

Centering and shuttering including strutting, propping etc. and removal of form

for all heights :

4.3.1 Foundations, footings, bases of columns, etc. for mass concrete Sqm. 380.470 392.15 1,49,201.31

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3

coarse sand : 6 graded stone aggregate 20 mm nominal size derived from natural resources) over 75mm thick

4.17 bed of dry brick ballast 40 mm nominal size, well rammed and consolidated Sqm. 138.120 749.30 1,03,493.32

and grouted with fine sand, including necessary excavation, levelling &

dressing & finishing the top smooth.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing

and reinforcement - All work up to plinth level :

1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived

5.1.2 from natural sources)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas,

lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of

centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3

graded stone aggregate 20 mm nominal size derived from natural sources).

Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using

coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement,

admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability

without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of

centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the

following grades of concrete.

(Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the

cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to

5.33.1.2 either re-design the mix or bear the cost of extra cement.) Cum 232.939 9,655.70 22,49,189.10

5.33.1 All works upto plinth level Concrete of M30 grade with minimum cement content of 350 kg

Digitally signed by ARTI

DSR-2023 Unit AMOUNT

DSR 2023 RATE/NS

item no./MS DESCRIPTION OF ITEM QTY

Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using

coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement,

admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability

without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of

centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the

following grades of concrete.

(Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the

cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to

5.33.2.2 either re-design the mix or bear the cost of extra cement.) Cum 42.724 10,011.35 4,27,724.92

5.33.2 All works above plinth level upto floor V level Concrete of M30 grade with minimum cement

content of 350 kg /cum

Centering and shuttering including strutting, propping etc. and removal of form work for :

Foundations, footings, bases of columns, etc. for mass

Centering and shuttering including strutting, propping etc. and removal of form work for :

5.9.2 Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. Sqm 295.098 842.50 2,48,620.07

Centering and shuttering including strutting, propping etc. and removal of form work for :

Suspended floors, roofs, landings, balconies and access

Centering and shuttering including strutting, propping etc. and removal of form work for :

Lintels, beams, plinth beams, girders, bressumers and

Centering and shuttering including strutting, propping etc. and removal of form work for :

5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts Sqm 54.000 961.30 51,910.20

Digitally signed by ARTI

DSR-2023 Unit AMOUNT

DSR 2023 RATE/NS

item no./MS DESCRIPTION OF ITEM QTY

Steel reinforcement for R.C.C. work including straightening, cutting,

bending, placing in position and binding all complete upto plinth level.

Thermo-Mechanically Treated bars of grade Fe-500D or more

Smooth finishing the exposed surfaces of RCC work with 6mm thick cement plaster of mix 1:3 (1 portland pozzolona cement : 3 fine

5.23 sand) to give smooth and even surfaces. Sqm 856.891 300.45 2,57,452.90

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6

coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :

Cement mortar 1:6 (1 cement : 6 coarse sand)

6.1 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:

6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 26.794 7,132.25 1,91,101.51

6.4 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to

floor V level in all shapes and sizes in :

6.4.2 Cement mortar 1:6 (1 cement : 6 coarse sand) cum 52.763 9,105.95 4,80,457.24

Brick work with non modular fly ash bricks conforming to IS:12894,

class designation 10 average compressive strength in super structure above plinth level up to floor V level in :

Cement mortar 1:6 (1 cement : 6 Coarse sand)

Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine

Flush/ Ruled pointing

15 mm cement plaster on the rough side of single or half brick wall of mix :

1:6 (1 cement: 6 fine sand)

15 mm cement plaster on rough side of single or half brick wall

13.8.2 finished with a floating coat of neat cement of mix : 1:4 (1 cement: 4 fine sand) Sqm 232.200 477.90 1,10,968.38

13.18 Neat cement punning Sqm 72.070 79.95 5,762.00

Finishing walls with Acrylic Smooth exterior paint of required shade: New

13.46.1 work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 Sqm 2096.300 160.60 3,36,665.78

Wall painting with premium acrylic emulsion paint of interior grade,

having VOC (Volatile Organic Compound ) content less than 50

13.83.2 grams/ litre of approved brand and manufacture, including applying Sqm 2340.300 142.80 3,34,194.84

additional coats wherever required to achieve even shade and colour.

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire

length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and

arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing

necessary 27.5 cm long wire springs manufactured from high

10.6.1 tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. Sqm 7.500 3,653.20 27,399.00

80x1.25 mm M.S. laths with 1.25 mm thick top cover

10.7 Providing and fixing ball bearing for rolling shutters. each 2.000 492.35 984.70

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of

approved steel primer using structural steel etc. as required..

10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works Kg 500.000 172.60 86,300.00

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with

hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately)

Digitally signed by ARTI

DSR-2023 Unit AMOUNT

DSR 2023 RATE/NS

item no./MS DESCRIPTION OF ITEM QTY

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction

with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both

faces of shutters.

35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid

PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door

frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided

through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s

specification and direction of Engineerin-Charge

Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size

of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make

and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of

which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide

PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and

115 mm wide PVC sheet out of which 75

mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of

the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5

mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15

mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of

9.120.1 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Sqm 32.625 3,182.95 1,03,843.74

Engineer-in-charge, manufacturer's specification & drawing.

30 mm thick plain PVC door shutters

9.147.C2 Fixed window / ventilator with mullion/transom

Using R2 series with frame (39 mm & above)x(39 mm & above) & mullion (39 mm & above) x(60 mm & above). (Height upto 1.2

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the

manufacturer), of 1st quality conforming to IS : 15622, of approved make,in colours Shade except White, Ivory, Grey,

Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1Cement: 4 Coarse sand), jointing with grey cement slurry @

3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.

Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali

11.21 resisting mortar bedding and joints filled with acid and/or alkali resisting cement as per IS:4457, complete as per the

direction of Enginner-in-Charge.

11.21.1.1 In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand)Acid and alkali resistant tile Sqm 425.880 1,738.15 7,40,243.32

Digitally signed by ARTI

DSR-2023 Unit AMOUNT

DSR 2023 RATE/NS

item no./MS DESCRIPTION OF ITEM QTY

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water

absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid

on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including

grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond

cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and

rubber mallet for placing the tiles gently and easily.

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less

than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement

mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and

matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch

trowel, plier, wedge, clips of required

11.41A.3.1 thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles Matt/Antiskid finish of size Sqm 131.700 1,464.85 1,92,920.75

Size of Tile 600 x 600 mm

Deduct for not using 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) bedding in laying of floor tiles and jointing

with grey cement slurry @ 3.3 kg/ sqm.

Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based)

conforming to IS: 15477, in average 3mm thickness.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of

approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting,

risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry

8.31 @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. Sqm 337.600 1,267.95 4,28,059.92

Providing and fixing 18 mm thick gang saw cut, mirror polished,

premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required

size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with

white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high

8.2.2.1 gloss finish etc. complete at all levels. 8.2.2 Granite stone slab colour black, Cherry/Ruby red Sqm 22.800 5,413.50 1,23,427.80

Area of slab upto 0.50 sqm

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc.,

8.3. including machine polishing to edge to give high gloss finish etc. complete as -

per design approved by Engineer-in-Charge.

Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and

8.5 similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing Each 36.000 978.70 35,233.20

and polishing of cut edges etc. complete

Digitally signed by ARTI

DSR-2023 Unit AMOUNT

DSR 2023 RATE/NS

item no./MS DESCRIPTION OF ITEM QTY

Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick,

fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase

with epoxy grout or with cement concrete 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size)

as per direction of Engineer-in-charge and finished smooth. Granite Stone of approved shade

Providing and fixing ISI marked flush door shutters conforming to IS : 2202

(Part I) decorative type, core of block board construction with frame of 1st

class hard wood and well matched teak 3 ply veneering with vertical grains or

cross bands and face veneers on both faces of shutters.

35 mm thick including ISI marked Stainless Steel butt hinges with necessary

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum

9.23 depth on all edges of flush door shutters (over all area of door shutter to be Sqm. 32.000 462.35 14,795.20

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound )

13.85.3 Water thinnable cement primer Sqm. 2613.000 73.95 1,93,231.35

Painting Steel work with Deluxe Multi Surface Paint to give an even shade.

13.48.3 Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer Sqm. 250.000 170.70 42,675.00

applied @ 0.80 ltr/10 sqm of approved brand and manufacture

Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer, over

the plastered wall surface to prepare the surface even and smooth complete

Providing & fixing White vitreous china water closet squatting pan

(Indian type) along with "S" or "P" trap including dismantling of old

WC seat and "S" or "P" trap at site complete with all operations

including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in

charge. Orissa pattern W.C Pan of size 580x440 mm

Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of

22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub

16.1 grade and disposal of surplus earthwith lead upto 50 metres SQM 8064.000 218.90 17,65,209.60

Supplying and stacking at site. Stone screening 11.2 mm nominal size (Type B)

Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling

with 3 wheeled road/vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type

of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density

Providing and fixing white vitreous china pedestal type water closet

(European type) with seat and lid, 10 litre low level white vitreous

china flushing cistern & C.P. flush bend with fittings & C.I. brackets,40 mm flush bend, overflow arrangement with specials of

standardmake and mosquito proof coupling of approved municipal designcomplete, including painting of fittings and brackets, cutting

and making good the walls and floors wherever required : W.C. pan with ISI marked white solid

plastic seat and lid

Digitally signed by ARTI

DSR-2023 Unit AMOUNT

DSR 2023 RATE/NS

item no./MS DESCRIPTION OF ITEM QTY

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar

17.7 taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings

and brackets, cutting and making good the walls wherever require:

17.7.2 White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap Each 7.000 2,226.35 15,584.45

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern,

including painting of fittings and brackets, cutting and making good the walls wherever require:

17.7.4 White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap Each 4.000 1,879.20 7,516.80

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto

17.16A 1 metre long with S.S. triangular plate to Eureopean type W.C. of Each 4.000 349.15 1,396.60

quality and make as approved by Engineer - in - charge.

17.22A Providing and fixing CP Brass 32mm size bottle trap of approved quality & make and as per the direction of engineer in charge.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Flexible pipe

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of

approved make and shade with 6 mm thick hard board backing : Rectangular shape 453x357 mm

17.34 Providing and fixing toilet paper holder :

Designing, providing, installing and fixing factory finished custom designed cold form Light Gauge Steel Framed super

structure comprising of steel wall panel, trusses, purlins etc manufactured out of minimum 0.75 mm thick steel sheet as

per design requirements. The steel sheet shall be galvanized (AZ-150 gms Aluminium Zinc Alloy coated steel having

minimum yield strength 300- 550 Mpa) conforming to AISI specifications and IBC 2009 for cold formed steel framing and

construction and also as per IS: 875-1987, ISO 800-1984 and IS: 801- 1975. The wind load shall be as per provisions of IS

875 (part -III). LGSFS frame shall be designed as per IS: 801 using commercially available software such as Frame CAD

Pro-11.7/ STAAD PRO-V8i/ArchitekV2.5.16/ Revit architecture-2011 or equivalent. Proper usage of Connection

Accessories like Heavy Duty Tension Ties, Light Duty Hold-ons, Twist Straps (to connect truss with wall frames), Strong

Tie, Tie Rod, H-Brackets, Boxing Sections, L-Shaped Angles for better structural stability. The framing section shall be

cold form C-type having minimum web depth 89 mm x 39mm flange x 11mm lip in required length as per structural design

requirement duly punched with dimple/slot at required locations as per approved drawings. The slots will be along centre

line of webs and shall be spaced minimum 250mm away from both ends of the member. The frame can be supplied in

panelized or knock down condition in specific dimensions and fastened with screws extending through the steel beyond by

minimum of three exposed threads. All self drilling tapping screws for joining the members shall have a Type II coating in

accordance with ASTM B633(13) or equivalent corrosion protection of gauge 10 & 12, TPI 16 & 8 of length 20mm. The

frames shall be fixed to RCC slab or Tie beam over Neoprene rubber using self expanding carbon steel anchor bolt of dia

as per approved

drawings. design subject to minimum 12mm diameter and 121mm length conforming to AISI 304 and 316 at 500mm c/c

with minimum embedment of 100mm in RCC (RCC to be paid separately) and located not more than 300mm

26.41 from corners or termination of bottom tracks complete in all respects. The Kg. 13995.000 285.90 40,01,170.50

item also includes the submission of stability reports duly examined and issued

by any NIT/IIT. The rate includes the concept design, detailed design,

fabrication of sections, transportation, installation and all required fixing

arrangement at site as described above. Steel component having thickness less than 1.5 mm shall be measured under

this item.viz deck sheet ,Door window trim.

Digitally signed by ARTI

26.41 from corners or termination of bottom tracks complete in all respects. The Kg. 13995.000 285.90 40,01,170.50

item also includes the submission of stability reports duly examined and issued

by any NIT/IIT. The rate includes the concept design, detailed design,

fabrication of sections, transportation, installation and all required fixing

arrangement at site as described above. Steel component having thickness less than 1.5 mm shall be measured under

DSR-2023 this item.viz deck sheet ,Door window trim. Unit AMOUNT

DSR 2023 RATE/NS

item no./MS DESCRIPTION OF ITEM QTY

Providing and fixing internal wall panels on Light gauge steel frame work with 12.5mm thick gypsum plaster board

conforming IS 2095:2011 fixed on cement board as per standard sizes fixed with self-drilling / taping screws / fasteners @

26.43 60cm c/c of approved make, Screws shall be of counter sunk rib head of 1.60mm to 4 mm thick or 8 to 10 gauge of length

varying from 25 to 45 mm. Proper taping and jointing to be done using fibermesh tape and epoxy and acrylic based jointing

compound for seamless finish.(cost of frame work to be paid for separately)

26.43.1 Cement Fiber Board 8 mm thick as per IS 14862:2000 of type B (High pressure Steam Cured) Sqm. 435.000 2,221.05 9,66,156.75

Providing and fixing in all exterior face panels breathable vapour barrier underneath the cement fiber board as per

National Building Code 2009 complete as per direction of Engineer-in-charge.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing

10.16 in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped

washers etc. complete.

10.16.1 Hot finished welded type tubes kg 24700.000 194.40 48,01,680.00

Providing and fixing thermal insulation with Resin bonded rock wool conforming to IS: 8183, density 48 kg/m3, 50 mm

12.61 thick, wrapped in 200 G virgin Polythene bags placed over existing false ceilng and held in position by criss-crossing Gl Sqm 649.000 316.05 2,05,116.45

Providing and fixing thermal insulation with Resin Bonded rock wool

conforming to IS: 8183, having density 48 kg/m3,50 mm thick,wrapped in 200 G Virgin Polythene Bags fixed to wall wirh

screw, rawel plug & washers and held and in position by criss cossing GI wire etc. complete as per directions of Engineer-

Providing and fixing roofing consist of 0.8 mm thick galvanized steel deck sheet confirming to IS 277:1992 used as

permanent shuttering over which MS wire mesh 3mm laid at 100x100 mm grid including edge trim covered with concrete.

This metal deck will be supported on structural steel beam with shear studs. (Structural steel like Beam, column, joists etc.

& concrete of different grade as per design will be paid separately).

Digitally signed by ARTI

DSR-2023 Unit AMOUNT

DSR 2023 RATE/NS

item no./MS DESCRIPTION OF ITEM QTY

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by

Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240

mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should

12.50 have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in Sqm 649.000 738.65 4,79,383.85

single length upto 12 metre or as desired by Engineer-incharge.The sheet shall be fixed using self drilling /self tapping

screws of size (5.5x 55 mm) with EPDM seal,complete upto any pitch in horizontal/ vertical or curved surfaces, excluding

the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc

12.51 coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet

and polyester top coat 15- 18 microns using self drilling/ self tapping screws complete :

12.51.2 Flashings/ Aprons.( Upto 600 mm) Rm. 150.400 485.60 73,034.24

12.51.6 Gutter(600mm overall width) Rm. 47.400 1,313.70 62,269.38

Providing flat iron brackets 50x3 mm size with necessary bolts, nuts and washers etc. for fixing G.S. Sheets gutters with

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular

sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash

fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with

21.1 required EPDM rubber/ neoprene gasket etc.Aluminium sections shall be smooth, rust free, straight, mitred and jointed

mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass /

stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.

(Glazing,paneling and dash fasteners to be paid for separately) :

21.1.1 For Fixed Portion

21.1.1.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) kg 160.000 530.90 84,944.00

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of

21.1.2 fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for

21.1.2.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) kg 46.000 634.45 29,184.70

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. With EPDM rubber /

21.3 neoprene gasket etc. complete as per the architectural drawings and the directions ofengineer-in-charge . (Cost of

aluminium snap beading shall be paid in basic item):

21.3.1 With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) sqm 6.000 1,176.80 7,060.80

9.74 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete

Digitally signed by ARTI

DSR-2023 Unit AMOUNT

DSR 2023 RATE/NS

item no./MS DESCRIPTION OF ITEM QTY

9.81 Providing and fixing bright finished brass handles with screws etc. complete

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of

approved quality with necessary screws etc.

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic

coating not less than grade AC 10 as per IS : 1868), transparent or dyed to

required colour or shade, with nuts and screws etc. complete :

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodiccoating

9.97 not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required

colour or shade, with necessary screws etc. complete :

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating

9.100' not less than grade AC 10 as per IS : 1868) transparent or dyed to required

colour or shade, with necessary screws etc. complete :

9.82 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc.complete. Each 11.000 121.65 1,338.15

Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing,staircase railing and

similar works, including applying priming coat of approved steel primer.10.26.1 MS TUBE

Digitally signed by ARTI

DSR-2023 Unit AMOUNT

DSR 2023 RATE/NS

item no./MS DESCRIPTION OF ITEM QTY

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power

pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and

consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to

centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of

cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of

angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to

which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5

mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting

12.45 clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick

27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl

plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling

section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and

finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes ,

finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable

for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills,

diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and

direction of the Engineer in Charge but excluding the cost of painting with :

12.45.1 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- Part I Sqm. 623.000 1,355.80 8,44,663.40

12.45.3 12.5 mm thick tapered edge gypsum moisture resistant board Sqm. 100.870 1,529.10 1,54,240.32

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory

windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium

carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12

for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star

headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N

26.86 (Edge), minimum compressive strength of 58N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame

of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position

with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge.

(M.S hold fast/lugs or SS dash fasteners shall be paid for separately).Note: For WPC solid door/window frames, minus

5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side

shall be acceptable but no extra payment on this account shall be made.

Digitally signed by ARTI

DSR-2023 Unit AMOUNT

DSR 2023 RATE/NS

item no./MS DESCRIPTION OF ITEM QTY

9.53 Providing 40 x 5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts , nuts and wooden plugs and

embedding in cement concrete block 30 x 10 x 15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm

nominal size). Each 54.000 228.85 12,357.90

9.40.1.1 Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed

surface etc. 2nd class teak wood

complete : 50x12 mm

Providing and fixing C.P. brass long nose bib cock of approved quality

conforming to IS standards and weighing not less than 810 gms.

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of

approved make and quality as per direction of Engineer-in-charge.

18.21.2.1 Providing and fixing uplasticised PVC connection pipe with brass unions : 45cm Each 26.000 97.75 2,541.50

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed

fittings arrangement of approved quality and colour.

600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply,

including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This

includes jointing of pipes & fittings with one step CPVC solvent cement and

testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making

good the walls etc.

18.8.2 20 mm nominal outer dia Pipes Rm 95.000 537.60 51,072.00

18.8.3 25 mm nominal outer dia Pipes Rm 32.000 627.25 20,072.00

18.8.4 32 mm nominal outer dia Pipes Rm 20.000 739.30 14,786.00

Providing and placing on terrace (at all floor levels) polyethylene water

storage tank, IS : 12701 marked, with cover and suitable locking arrangement

and making necessary holes for inlet, outlet and overflow pipes but without

fittings and the base support for tank.

Digitally signed by ARTI

DSR-2023 Unit AMOUNT

DSR 2023 RATE/NS

item no./MS DESCRIPTION OF ITEM QTY

Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910,on 12 mm dia steel

bar conforming to IS: 1786, having minimum cross section as 23 mmx25 mm and over all minimum length 263 mm and

width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or

19.16 chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and nos 20.000 553.70 11,074.00

suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's

permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement

concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)complete as per design.

Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain

pipe 100 mm diameter, 1.8 m long complete as per standard design

19.32.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 1.000 26,861.90 26,861.90

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water

19.4 tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not

less than 2.70 kg as per standard design

19.4.1 100x100 mm size P type

19.4.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 6.000 2,707.65 16,245.90

19.7 Constructing brick masonry manhole in cement mortar 1:4 (1cement : 4 coarse sand) with RCC top slab with 1:2:4 mix (1 cement : 2

coarse sand 4 graded stone aggregate 20mm nominal size) foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone

aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating

coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm

nominal size) finished with a floating coat of neat cement complete as per standard design.

19.7.1 Inside size 90 x 80 cm and 45 cm deep including pre-cast R.C.C. manhole cover and frame of required shape and approved quality H

D - 20 Circular shape 560

mm internal diameter.

19.7.1.2 With Sewer bricks conforming to IS : 4885 Each 2.000 12,711.80 25,423.60

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4

(1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with

frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1

19.30' cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine

sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement :

3 coarse sand),finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as

perstandard design:

19.30.1 Inside dimensions 455x610 mm and 45 cm deep for single pipe line :

Digitally signed by ARTI

DSR-2023 Unit AMOUNT

DSR 2023 RATE/NS

item no./MS DESCRIPTION OF ITEM QTY

19.30.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Each 2.000 6,937.90 13,875.80

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including

jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water

12.42 pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for

thermal expansion.

12.43 Providing and Fixing on wall face unplasticised - PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means

of 50 x 50 x 50 mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement

mortar 1:4 (1 Cement: 4

Coarse sand) and making good the walls etc. complete

12.44 Providing and Fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less then 440 grams.

12.22 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone

aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3

coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete Each 10.000 298.25 2,982.50

12.21 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge),

including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design

13.4 12 mm cement plaster of mix :

13.11 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) finished with a top layer 6

mm thick cement plaster 1:6 (1 cement : 6 fine sand). sqm 229.400 518.55 1,18,955.37

13.41 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of

required shade and colour complete, as per manufacturer's specification.

13.41.1 Two or more coats on new work and including water thinnable priming coat with cement primer having VOC contnent less than 50

18.22 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :

11.5 62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2

coarse sand : 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1

cement hardener mix : 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of

cement or as per manufacture’s specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc.

18.18 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :

18.52 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.

Digitally signed by ARTI

DSR-2023 Unit AMOUNT

DSR 2023 RATE/NS

item no./MS DESCRIPTION OF ITEM QTY

18.46 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :

18.49 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :

18.10 Providing and fixing G.I. pipes complete withh G.I. fittings and clamps, i/c cutting and making good the walls etc.

Internal work - Exposed on wall and terrace

18.10.2 20 mm dia nominal bore metre 40.000 437.30 17,492.00

18.12 Providing and fixing G.I. pipes complete with G.I. fittings includingtrenching and refilling etc.

18.12.4 32 mm dia nominal bore Metre 60.000 540.30 32,418.00

18.12.6 50 mm dia nominal bore Metre 60.000 762.15 45,729.00

18.38 Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved

quality for new

18.38.2 20 mm diameter pipe Metre 40.000 23.25 930.00

23.1.1.1 Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting

samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools,

plants & machineries required for the job, all complete as per direction of Engineer -in-charge, up to 90 metre depth below ground

All Types of Soil

23.1.2.1 Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting

samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools,

plants & machineries required for the job, all complete as per direction of Engineer -in-charge, up to 90 metre depth below ground

Rocky strata including Boulders

23.3.3 Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of

required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all

depths, as per direction of Engineer-in-charge. Metre 45.000 1,113.35 50,100.75

200 mm nominal size dia

23.4.3 Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with

ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction

of Engineer-in-charge. Metre 45.000 1,255.70 56,506.50

200 mm nominal size dia

23.13.3 Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable

as per requirement, all complete for borewell of:

23.15.3 Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I).

Digitally signed by ARTI

DSR-2023 Unit AMOUNT

DSR 2023 RATE/NS

item no./MS DESCRIPTION OF ITEM QTY

16.68 Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making

machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including

50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.

Subtotal Schedule Items 415,06,495.46

NON-SCHEDULE ITEMS

INDOOR/OUTDOOR SURFACES

SUB-BASE FOR Tennis, BAsketball, & Track, Providing & Laying 60 to 80mm oversize Metal

Compacted to 150mm thk. Including Murum, Spreading, Watering, Rolling, etc., complete.

"Providing & Laying 75 mm thick semi grount bituminous road surface including supplying all materials preparing the existing road

surface, laying the required thickness of metal layer, heating and spraying bitumen spreading chips complete.

P/A tack coat on the prepared surface heating by frames in roller by spraying bitumen with spray set footed in bitumen boller on

Carpet & Seal coat. surface b) 5 Kg./10Sqm.

Providing 40mm thick premix bituminous carpet including supplying all materials, preparing and cleaning the base, heating bitumen,

mixing hot bitumen and chips, laying the carpet and compacting complete.

Premix Carpet bituman 3.5% by metal weight

"Providing hot mix 15 mm thick premix bituminous Seal Coat 5.5% bituman including supplying all materials preparing and cleaning

NS-1 the base, heating bitume mixing hot bitumen and chips, laying the layer with manualy and compacting the sealcoat including SQM 2478.920 2,667.00 66,11,279.64

providing and compacting seal coat with roller etc. complete.

i) using BUlk Bitumen grade (60/70) VG-30

Premix Seal Coat bituman 5.5% by metal Weight"

Acrylic surface for Tennis & baSKETBALL

5 layers System ITF approved over the Asphalt sub base For tennis AND BASKETBALL

2 coat of Acrylic Resurface

NS-2 2 coats of All Sports Color with silica sand SQM 1339.560 1,536.00 20,57,564.16

1 coat of colour

for game line marking

100 mtr Track Providing and laying a 13 mm World Athletic

Federation Approved Sprey-On system consisting of 11 mm thick, recycled rubber granules, 1 - 4 mm mix with binder and installed on

existing asphalt base with Priming layer to The asphalt base to improve its mechanical properties and adhesion.

Close the pores of the rubber base layer with 2 components PU Sealing coat to obtain a uniform mass and then spread a thin layer

over the rubber base.

2mm thick Top layer spray system with 2 component spray system with added 0.5-1.5 mm Granules EPDM spray with machine on

rubber base layer and line marking complete.

The surface meets:

NS-3 - technical parameters according to PN-EN 14877:20014 standard SQM 1139.360 6,777.00 77,21,442.72

- IAAF certificate number S-06-0066

- hygienic attestation of the National Institute of Hygiene

- tests on contents of trace elements of heavy metals

The IAAF-approved synthetic Track manufacturer should be of European/ American origin only. The submission of a certificate of

origin is mandatory

Digitally signed by ARTI

DSR-2023 Unit AMOUNT

DSR 2023 RATE/NS

item no./MS DESCRIPTION OF ITEM QTY

Supply & Fixing of FRP composite Drain with 250 external and 200 mm internal width& 30 to 250 mm variable depth 1:200 inbuild

gradient, 2 meters long overlap joints sealing with sealants during installation for leakages proof water draining with Polymer mesh

NS-4 design grating having 2.5 tone load bearing capacity Mtr 169.600 710.00 1,20,416.00

Providing, laying & fixing P.V.C. pipe of 110 mm. dia. with fittings such as bends, tees, reducers, clamps, etc.

FENCING FOR TENNIS & BASKETBALL 3 Mtr Sports Fence

Providing & Fixing factory made safety chain link fencing with powder coated steel special connector, it includes 3 Mtr High ф 76 mm

(OD) 2 mm thick MS pipes, Green powder coated factory finished post vertical post fixed on existing 400 x400 x600 mm reinforced

concrete foundation. Fastening with anchor fastener on reinforced concrete wall at 4 mtr centre to centre distance, ф 60 mm (OD) 2

mm thick MS pipe HORIZANTAL post, Horizontal post should be factory finished Green powder coated installed at Top and Bottom

location for 3 mtr Height with the help of special connectors. 2.4-2.5 mm thick Pvc coated galvanized steel chain link fence fabric

mesh of size 50 mm X 50 mm x 3 mtr, fixed to vertical post and two horizontal post with the help of 3 mm thick extruded Aluminium flat

with green powder coated finish with the help of self-tapping screw. 3 mm thick special Connectors made from pressed steel and

powder coated finish for connecting Vertical and horizontal post by using M12 X 90 carriage bolt at every joint and corner of horizontal

and vertical post without welded joints for easy installation and removable. The safety fence system should sustain impact of the ball,

inner side of fence should be free from any projected parts/joints.

Supply and laying of 100 mm brocken brickbat compacting the same with compactor

Supplying, deliver , and stacking on site medium Fine sand( Silica) with sandy loam suitable including Transportation, loading,

NS-8 unloading, royalty etc. Complete as directed by engineer in charge. CUM 1162.200 3,928.00 45,65,121.60

Supplying and spreading of a special red soil 100 mm including watering and comapction with 8 ton vibrator roller etc.

Providing and Laying of 110mm Dia perforated UPVC drain pipes of Class 4 in trenches of min load bearing of min 6 kg per cm sq &

perforations @ 0.15m c/c in 50% area of pipe. Whole Pipe to be covered with Geotextile Sheet of 200 micron & laid

perpendicular to the length of field @ 5m c/c with openable junction at centre for maintenance purpose. Incl filling of 20 - 40 mm

sizeaggregate bed and wrapping of geo textile arround pipe with all fitting for the pipe. Testing of pipes for water flow to be

carried out before covering

with aggregates

P/L of 160mm Dia perforated UPVC drain pipes of Class 4 in trenches of min load bearing of min 6 kg per cm sq & perforations

@ 0.15m c/c in 50% area of pipe. Whole Pipe to be covered with Geotextile Sheet of 200 micron & laid perpendicular to the

length of field @ 5m c/c with openable junction at centre for maintenance purpose. Incl filling of 20 - 40 mm

sizeaggregate bed and wrapping of geo textile arround pipe with all fitting for the pipe. Testing of pipes for water flow to be

carried out before

covering with aggregates

Supplying and stacking at site organic manure from approved source, including carriage upto 5 km lead complete :@6kg

mixing and Spreading rootzone Sand: Very Coarse sand(1mm To 1.5mm range) :- 5% of the material , Coarse sand(0.5 mm To 1mm

range):40% of the material, Medium Sand( 0.5 to 0.25mm) & Fine Sand (0.25 to 0.15 mm) not more than 30%.Very find Sand (0.15 to

0.05 mm) Maximum permissable 20% , Silt and Clay <0.05mm No more than 5% silt and clay.) As directed by consultant.

Digitally signed by ARTI

DSR-2023 Unit AMOUNT

DSR 2023 RATE/NS

item no./MS DESCRIPTION OF ITEM QTY

Source, Supply, Deliver & Plant Bermuda grass on site by Planting method directed by engineer in charge. The grass must be weed

fee. Rate including all required fertilizer, pesticider & Chemical etc. complete for growing the turf.

Spec. No.:- As directed by Engineer in charge

Design, Supply, Installation, Testing and Commissioning of all Irrigation/sprinkler Systeam as per sprinkler manufacturere

specification, site conditions requirement, scope of work to make sprinkler systeam operate smoothly as per requirement of the

football field and approval by client/consultant, Installation includes preparation of Shop drawings and all other items required for

staisfactory performance of sprinkler system but not included in the supply items. (including all material & Labour charges, piping,

popup sprinkler with swing joints, all Cableling with condute, Pumps (1 working + 1 standby) min. 7.5HP, Automatic Controll Panel,

Valves, Disc Filter, Clamps, NRV, Etc all complete to run Smooth Opration of Sprinkler.)

Supplying and filling of Silica Sand in sand pit of approved quality including cost and conveyance of all materials, Royalty charges,

NS-16 Transportation and labour charges to the site to fill the sand in pits. Spec. As directed by Engineer charge Cum 12.920 10,621.00 1,37,223.32

construction of Cricket Pitch with all materials and labour .

Area / Size of Pitch - 25 L x 3.05 W X 9 PITCH

Materials use for Pitch

a) 100 MM GSB .

B) Brick bat 100 mm l.

C) 150 mm sand filter media.

d) 250 mm picth soil with Black cotton

e)Cynodone dactylon

Pace Friendly pitch Pitch area = 2.74 M wide X 12 Mtr length X 2 Nos supply and installation 12 mm thick dense, Knit De Knit

polypropylene fibres surfaces over 6 mm thick shock pad for Cricket Wicket / Pitch area, permanent installation with adhesive. Pile

NS-18 Height 6 mm high Pile Product Weight should not less than 1,550gsm sqm 65.760 6,941.00 4,56,440.16

3 M height Cricket cage Specification 2 BayX 12 mtr x 4 width.

Providing & Fixing Factory finished 3 M height Cricket cage with powder coated steel, it includes 3 Mtr High ф 60 mm MS pipes,

Green powder coatedvertical post inserted in sleeve provided at the bottom at 3.8 mtr center to center distance, and ф 42 mm (OD)

MS pipe HORIZANTAL post, Horizontal post should be factory finished Green powder coated installed at Top and Bottom location for

3 mtr Height with the help of with flange and hardware, 50x 50 x 2.5 mm Nylon Net fixed to 2 side, top and back side of bay with the

help of6mm nylon rope. The Cricket net system should sustain impact of the ball, inner side of fence should be free from any

projected parts/joints

Digitally signed by ARTI

DSR-2023 Unit AMOUNT

DSR 2023 RATE/NS

item no./MS DESCRIPTION OF ITEM QTY

Supply and Installation of FIBA, WSF, IHF, BWF Approved 100% solid hardwood pre finished Maple or Beech wooden sports flooring

as per specifications and conditions mentioned below:

Technical Specification:

Prefinished Hardwood flooring 22mm thick each individual strip. Minimum width of 129mm and 1830mm in length jointed together with

the help of tongue and groove on all four sides of all board.

Substructure of solid wood flooring shall consist of sleeper of Spruce or Pine having 63 mm wide and cross section of 38 mm and laid

perpendicular to the main flooring planks at a spacing 487.5mm centre to centre including 19 mm thick pads at 305mm centre to

centre spacing and polyethylene membrane installed over the concrete base beneath the flooring system as a vapour barrier between

the concrete and wood floor.

Vapour Barrier:

.20mm polyethylene membrane installed over the concrete base beneath the flooring system as a vapour barrier between the concrete

and wood floor.

NS-20 •Solid Hardwood floor board should be prefinished to eliminate the risk of human error when sanding and lacquering on site and easy SQM 333.000 13,904.00 46,30,032.00

and fast installation.

•Solid hardwood floor should be long life and low maintenance cost.

•Solid hardwood floor should be approved by following Federations:

FIBA (Federation International Basketball Association).

BWF (Badminton World Federation).

WSF (World Squash Federation)

IHF ( International Handball Federation)

Rubber Skirting:

Factory supplied 75mm x 100mm rubber base molding to include air channelling in back of base to provide full ventilation of the sub-

floor system. Fixed to the wall with a base molding adhesive as recommend by manufacturer

Supply & Fixng of 7mm thick synthetic sports surface, it consists of a wear layer not less than 1 mm thick, with a fiberglass grid for

sound stability on the floor. Surface treated with PUR (Polyurethane treatment for fungistatic and bacteriostatic properties. Weight not

less than 4.35 kg per sqm, Sheet width 1.8 mts, joined with seamless hot welding. Floorings were laid with adhesive as per the

manufacturer’s instruction over the existing levelled surface.

Technical Specifications

Shock absorption under EN 14808 standard not less than 16%

Ball bounce under EN 12235 standards not less than 95%

Abrasion resistance as per EN ISO 5470-1 shall be passed

Sound Impact shall be > 20-22 dB

SPORTS EQUIPMENTS -

Movable goal post

Providing & Fixing in-position 110mm oval shape Aluminium Powder coated Goal Post (Dimensions 7.32m x 2.44m) with 3-4mm

braided Goal net of size Size 7.32 X 2.44 X 1.2- 3 mm. Each set of Goal Posts will consist of 2 verticals with horizontal distance

between the inside of the posts 7.32m (8 yards) and 1 Horizontal with a vertical distance from the lower edge of the crossbar to the

ground 2.44m (8 ft). Goal nets fixed with plastic. Including Full length, net supports Heigh rise wheels, White

NS-23 Back bar with weight insert provision to stability Pair 1.000 5,90,000.00 5,90,000.00

All materials and size are to be as per FIFA QUALITY Standards

Digitally signed by ARTI

DSR-2023 Unit AMOUNT

DSR 2023 RATE/NS

item no./MS DESCRIPTION OF ITEM QTY

Fixed Basketball Post

sypplying of Fixed Basketball post with net, outdoor model Made of 150 mm x 150 mm Sq tube with boom extension of 3.2 m.

Board Frame: 40 mm x 40mm square tube structure with 12mm Toughen Glass 1800X1050X (12 mm) mounted with the help of cross

Dunking ring: dunking rim with three spring mechanism. Die made, as per international standard. As approved design."

Supply & installation of Mild steel green/Black powder coated finish Tennis post.

Tennis Post made of 100x3mm Square tube including post caps, Manual winch, jam-free cable tensioning hardware system.

It can be provided with ground sleeves, and 42' long Tennis Net. Side & Bottom Headline Cable. With Loop & Pin Finish etc.

Volleyball Post

supplying and Installation of Removable Volleyball Post comes with dia 76 mm outer pole with red powder coating and

Dia 60 mm adjustable upright with zinc plating.

NS-26 Height can adjust 2M to 2.5m by manual pin locking system. Pair 2.000 1,16,824.00 2,33,648.00

Volleyball post fixed by using ground sleeves with holdfastand concrete. Manual winch is provided for tightening the net.

NS-27 Supplying & Fixing kho-Kho Post Pair 1.000 59,049.00 59,049.00

Spectator Seating /Grandstand /Demountable Spectator Seating System for Sports Ground

Supply and installation Grand Stand /Demountable Spectator Seating System for Sports Ground which includes 48 dia vertical,

horizontal and cross HOT dip Galvanized pipe and 50 mm X 50 mm sq. pipe 3.25 Mtr long Support Beam structure as per

manufaturer specification fixed at c/c Distance 2075 mm. All vertical horizontal cross and support frame connect with the help of ring

Connector with locking arrangement.

"The Grandstand sizes should be as follows Deck width should be minimum 880 mm wide Riser Height should be minimum 300 mm

height Aisle Width: 1000 mm,

Seat Center to center distance 460 -480 mm "

Aluminum Floor Deck

1.5 mm -2 mm mm thick and 38 mm high anti Skid Extruded Aluminum Floor deck with supporting legs , The deck and

understructure joined together through M10 high tension torque fasteners.

The guardrail is made with 40 X 20 mm rectangular & 20 x 20 mm sq. GI pipe

HDPE Blow Mould Seat

Providing and fixing double-wall hollow blow mold bucket type seat minimum having dimensions as 465 mm side length x 440 mm

front width x 400 mm rear height in one piece of HDPE having minimum shell thickness of 3 mm on each wall and minimum density of

0.95 gram/cm3, weight of plastic chair should not less than 2 kg, chair should withstand in high temperature not less than 70°C with

ultraviolet stabilizer and color fastness, having ergonomic design, with two digit aluminum number plate for seat to be fixed on

NS-28 Galvanized pipes 25 Nominal Bore light as per IS1239 (PART 1): 2004 running under the chairs. Nos 100.000 22,428.00 22,42,800.00

Front cover panel

GI SHEET 1.6 mm thick bended with bending machine as per front cover design and fixed to the main frame width of front cover

panel should be 180 mm wide

MS SHEET 1.6 MM THICK bended with bending machine as per Step Size with angle support and floor with 3 mm thick MS

checkered plate.

Digitally signed by ARTI

DSR-2023 Unit AMOUNT

DSR 2023 RATE/NS

item no./MS DESCRIPTION OF ITEM QTY

Badminton Post - Movable Badminton Poles Made from 40X40X5mm steel square tube with 50kg. of dead weight. Roller wheels to be

provided for facilitating easy transport and storage. Post provided with mechanical Winch to support and tighten heavy net. Net

Table Tennis :- Providing & fixing Table tennis of size 2740mm x 1525mm x 760mm made of 25mm pre-laminated top fixed on 50mm

x 25mm GI powder coated frame. wheel Size 100 MM. two wheels with lock and six free moving wheels

Folding 18 x 18 inches wooden chess board.

NS-31 Board is made up of seasoned teakwood and Ashwood. Finished with hand polish and put coating. Wooden players included. Nos 2.000 46,739.00 93,478.00

TOURNAMENT CARROM BOARD

NS-32 1. Size : 35 x 35 x 20 mm, 2. Border Size : 3 x 2 inch. 3. Playing Area : 29 x 29 inch. 4. Stand : MS Easy Fold Stand, 5. Coins : Nos 2.000 35,094.00 70,188.00

Wooden, 6. Indian Ply

5 Rows Aluminium Bleacher with HDPE blow moulded Seat

Supply of Aluminium Bleacher of 5 rows for 45 persons.

The dimension of the Structure is (4.5L X 3.15W X 1.5H)

The under structure is made by welded aluminium Square pipe and angle with Powder

The tread is made of extruded aluminium and anodized.

Aisle Deck width 500 mm and Riser Height 200 mm, system length 4.5m,

HDPE Blow Molded Seat.

Double-wall hollow blow mold bucket type seat having minimum dimensions as 500 mm side length x 440 mm front width x 420 mm

rear height in one piece of HDPE having minimum shell thickness of 3 mm on each wall. Minimum seat density of 0.95 gram/cm3,

weight of plastic chair should not be less than 2.65 kg. Chair should withstand in high temperature not less than 50°C with ultraviolet

stabilizer and color fastness, having ergonomic design, the chair should be fixed with Metal Inserts moulded inside seat to connect

seat with Galvanized pipes 32mm OD tube and 2 mm thickness running under the chairs. The pipes are resting above the square

NS-33 Water should not accumulate on chair. Chair should have a warranty of 2 years against significant colour fading and 3 years against set 3.000 7,29,389.00 21,88,167.00

breakage due to manufacturing defects.

Chair Plastic Part should have been tested with xenon –Arc exposure Test as per ISO 4892-2:2013, Cycle-1.

The Grey Sale Rating should be (GSR): > 4,

Product features:

Suitable Indoor for outdoor use.

Being Aluminium struct

NS-34 plastic chairs Nos 8.000 1,403.00 11,224.00

Digitally signed by ARTI

DSR-2023 Unit AMOUNT

DSR 2023 RATE/NS

item no./MS DESCRIPTION OF ITEM QTY

Providing, and fixing Leg Press of size 2000 X 405 X 1660 mm fabricated with main post of 140 mm dia and 2.5 mm thick

rest of the pipes are 40mm dia and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized,

and powder coated using of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as

necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to

finishing. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made

from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V

resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by

reputed company to be approved by Officer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted

movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground

with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it

and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge -

regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc

NS-36 Arm and Shoulder Wheel Set 3.000 1,07,399.00 3,22,197.00

Digitally signed by ARTI

DSR-2023 Unit AMOUNT

DSR 2023 RATE/NS

item no./MS DESCRIPTION OF ITEM QTY

Providing, and fixing Arm and Shoulder Wheel of size 1300 X 1200 X 1350 mm fabricated with main post of 140 mm dia

and 2.5 mm thick rest of the pipes are 40mm dia and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot

dipped galvanized, and powder coated using or equivalent of 80-120 micron thick. All welding joints of pipe are robotic

welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be

applied at all welding points prior to finishing. Padals shall be made up of Nylon alloy with rounded edge of prevent any

impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of

plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled

sealed and self lubricated made by reputed company to be approved by Officer -in-Charge. Equipment to be fitted within

built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The

equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the

concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction

and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate -

and fixing of equipment etc.

NS-37 Double Cross Walker Set 3.000 1,13,282.00 3,39,846.00

Providing, and fixing Double Cross Walker of size 1600 X 600 X 1600 mm fabricated with main post of 140 mm dia and

2.5 mm thick rest of the pipes are 40 mm dia and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped

galvanized, and powder coated using or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded

with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all

welding points prior to finishing. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of

injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic

4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed

and self lubricated made by reputed company to be approved by Officer -in-Charge. Equipment to be fitted within built

limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The

equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the

concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction

and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate -

and fixing of equipment etc.

Digitally signed by ARTI

DSR-2023 Unit AMOUNT

DSR 2023 RATE/NS

item no./MS DESCRIPTION OF ITEM QTY

Providing, and fixing of Pull pair of size 2500 X 800 X 2000 mm fabricated with main post of 114 mm dia and 2.5 mm

thick rest of the pipes are 40mm dia and 3.00 mm thick all pipes made up of hot rolled tubular steel and hot dipped

galvanized, and powder coated using or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded

with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all

welding points prior to finishing. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of

injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic

4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed

and self lubricated made by reputed company to be approved by Officer-in-Charge. Equipment to be fitted within built

limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The

equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the

concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction

and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate -

and fixing of equipment etc.

NS-39 Elliptical Exerciser Set 3.000 1,03,887.00 3,11,661.00

Providing, and fixing Elliptical Exerciser of size 1200 X 540 X 1600 mm fabricated with main post of 140 mm dia and 2.5

mm thick rest of the pipes are 40mm dia and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped

galvanized, and powder coated using of 80-120 micron thick. All welding joints of pipe are robotic welded with joints

scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding

points prior to finishing. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and

seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm,

colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self

lubricated made by reputed company to be approved by Officer -in-Charge. Equipment to be fitted within built limiters to

prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to

be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix

the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of -

Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of

Digitally signed by ARTI

DSR-2023 Unit AMOUNT

DSR 2023 RATE/NS

item no./MS DESCRIPTION OF ITEM QTY

Providing, and fixing of airs winging pair of size 1150 x900 x1250 mm fabricated with main post of 114 mm dia and 3.00

mm thick rest of the pipes are 40mm dia and 3.00 mm thick all pipes made up of hot rolled tubular steel and hot dipped

galvanized, and powder coated using or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded

with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all

welding points prior to finishing. Seat and Base plate cover shall be made up of virgin LLDPE manufactured by rotational

moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used

shall be maintained free, duly oiled sealed and self lubricated made by reputed company to be approved by Officer-in-

Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured

by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J

shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate

cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on -

metal, seat and base cover plate and fixing of equipment etc

Providing, and fixing of Air-Walker of size 100 x 550 x 1480mm fabricated with main post of 140 mm dia and 2.5 mm thick

and other pipes of 40 mm dia 2.5 mm thick made up of hot rolled tubular steel and hot dipped galvanized, and powder

coated 80-120 micron thick using or equivalent in desired shade and colour. All welding joints of pipe shall be robotic

welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be

applied at all welding points prior to finishing. Base plate cover shall be made up of virgin LLDPE plastic by rotational

moulding with minimum 4.00mm thickness U V resistant and colour as approved by Officer -in Charge. High quality grip

rubber should be used on handles. Foothold shall be made of Nylon alloy with rounded edge to prevent impact and

injury. Maintenance free bearing should be used in equipment manufactured by reputed company duly sealed and self

lubricated to be approved by Engineer in charge. Equipment to be fitted with inbuilt limiters . The equipment should be

fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and when concrete is set, fixing the

equipment on to it and cover nuts and bolts with base plate cover, all complete as per direction and approval of Engineer- -

in-Charge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc.

Digitally signed by ARTI

DSR-2023 Unit AMOUNT

DSR 2023 RATE/NS

item no./MS DESCRIPTION OF ITEM QTY

NS-42 Horse Rider Station Set 3.000 98,006.00 2,94,018.00

Providing, and fixing of horse rider station of size 1000 x 600 x 1100 mm fabricated with main post of 140 mm dia and 2.5

mm thick rest of the pipes are 40mm dia and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped

galvanized, and powder coated using or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded

with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all

welding points prior to finishing. Padals shall be made up Nylon alloy with rounded edge of prevent any impact of injury

and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm,

colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self

lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to

prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to

be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix

the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of

Officer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of -

Providing, and fixing of double sit-up station of size 1500 x 1150 x 650 mm fabricated with main post of 140 mm dia and 2.5 mm thick rest of the

pipes are 40mm dia and 3.00 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using or

equivalent of 80-120 micron thick. All welding joints of pipe shall be robotic welded with joints scalloped as necessary and dressed off removing

sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Seat and Base plate cover shall be made up of virgin

LLDPE plastic by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. The equipment

should be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and when concrete is set, fix the equipment on to it

and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of

equipment, colour (of metal, seat and pedal), and fixing of equipment etc.

NS-44 Exercising Bar Set 3.000 1,08,624.00 3,25,872.00

Providing, and fixing Exercising Bar of Pull pair of size 1800 X 550 X 1700 mm fabricated with main post of 140 mm dia and 2.5 mm thick rest of

the pipes are 40mm dia and 3.00 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using or

equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp

edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Padals shall be made up of Nylon alloy with rounded edge of

prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic

4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by

reputed company to be approved by Officer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of

pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped

welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction -

and approval of Officer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc.

NS-45 Seated Chest Press Set 3.000 1,10,944.00 3,32,832.00

Digitally signed by ARTI

DSR-2023 Unit AMOUNT

DSR 2023 RATE/NS

item no./MS DESCRIPTION OF ITEM QTY

Providing, and fixing Seated Chest Press of size 1800 X 700 X 2000 mm fabricated with main post of 114 mm dia and 2.5 mm thick rest of the pipes

are 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using or equivalent of

80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and

burrs. Zinc primer paint to be applied at all welding points prior to finishing. Padals shall be made up of Nylon alloy with rounded edge of prevent

any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm,

colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed

company to be approved by Officer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to

be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded

bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and -

approval of Officer -in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc.

Providing, and fixing Chin up Bar of size 2630 x 305 x 2640 mm fabricated with main post of 114 mm dia and 2.5 mm thick rest of the pipes are -

40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using or equivalent of 80- -

120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs.

Zinc primer paint to be applied at all welding points prior to finishing. Padals shall be made up of Nylon alloy with rounded edge of prevent any

impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful

and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company -

to be approved by Officer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be

coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded

bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and

approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc.

Digitally signed by ARTI

DSR-2023 Unit AMOUNT

DSR 2023 RATE/NS

item no./MS DESCRIPTION OF ITEM QTY

NS-47 Stair Stepper Set 3.000 89,692.00 2,69,076.00

Providing, and fixing of stair stepper in a combination of pair and a single step of size 1000 x 800 x 1400 mm fabricated with main post of 114 mm -

dia and 2.5 mm thick rest of the pipes are 40mm dia and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and -

powder coated using or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and

dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Padals shall be made up of

Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with

minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled -

sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent

unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of

minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base

plate cover, all complete as per direction and approval of Officer -in-Charge regarding material, shape of equipment, colour on metal, seat and base

cover plate and fixing of equipment etc.

Providing, and fixing Arm Wheel in a pair of size 850 X 800 X 1800 mm main post of 114 mm dia and 2.5 mm thick rest of the pipes are 40mm dia -

and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using or equivalent of 80-120 micron -

thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer

paint to be applied at all welding points prior to finishing. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury

and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant

environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by -

Officer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE

caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the

concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Officer-in-

Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc.

NS-49 Rowing Machine Set 3.000 1,10,944.00 3,32,832.00

Providing, and fixing Rowing Machine of size 1280 X 800 X 1500 mm main post of 140 mm dia and 2.5 mm thick rest of the pipes are 40mm dia -

and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using or equivalent of 80-120 micron -

thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer

paint to be applied at all welding points prior to finishing. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury

and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant

environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by

Officer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE

caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the

concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Officer-in-

Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc.

Digitally signed by ARTI

DSR-2023 Unit AMOUNT

DSR 2023 RATE/NS

item no./MS DESCRIPTION OF ITEM QTY

Providing, and fixing Twister of size 1700 X 1300 X 1300 mm main post of 114 mm dia and 2.5 mm thick rest of the pipes are 40mm dia and 2.5

mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using or equivalent of 80-120 micron thick.

All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to

be applied at all welding points prior to finishing. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat

to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant

environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by

Officer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE

caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the

concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Officer -in-

Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc.

Providing and fixing External&Wet wall system on Light gauge steel frame work with Outer face having 9mm thick heavy duty fiber

cement board confirming to IS 14862:2000, category IV type A (High pressure steam cured) as per standard sizes fixed with self

NS-51 drilling / taping screws / fasteners @ 60cm c/c of approved make. A grove of 2 mm to 3mm shall be maintained and groves shall be Sqm. 1801.810 1,455.00 26,21,633.55

sealed with silicon based sealant. The board shall be fixed in a staggered pattern.Screws shall be of counter sunk rib head of 1.60mm

to 4 mm thick of 8 to 10 gauge of length varying from 25 to 45 mm.(cost of frame work to be paid for separately).

Providing and fixing internal wall panels on Light gauge steel frame work with 12.5mm thick gypsum plaster board conforming IS

2095:2011 fixed on 8mm thick fiber cement board conforming to IS 14862:2000 of category III type B (High pressure steam cured) as

NS-52 per standard sizes fixed with self-drilling / taping screws / fasteners @ 60cm c/c of approved make, Screws shall be of counter sunk Sqm. 1097.000 1,270.00 13,93,190.00

rib head of 1.60mm to 4 mm thick of 8 to 10 gauge of length varying from 25 to 45 mm. Proper taping and jointing to be done using

fiber mesh tape and epoxy and acrylic based jointing compound for seamless finish.(cost of frame work to be paid for separately)

Providing and fixing of external thermal insulation and composite system with First layer of self-extinguishing type Expanded

Polystyrene (EPS) insulation boards of 50 mm thick ( max 1mX0.5m section), confirming to IS 4671:1984, having thermal conductivity

of 0.034 W/mK, (measured as per IS 3346-1980), density of 20-24kg/m³ measured as per IS 5688-1982, Fire retardant property self-

extinguishing type as per EN 13501-1,bonded with special polymer modified cementitious adhesive confirming to EOTA ETAG 004

(European Technical Approval) formulated to bond polystyrene insulation boards to typical mineral substrate (according to ETAG 004)

and Polypropylene mechanical fasteners with plastic pin confirming to EOTA ETAG 014 (European Technical Approval) having dia

10mm & L=200mm on finished level wall and the junction between two adjacent EPS boards to be sealed with low expansion moisture

cure Polyurethane Foam. Second layer consists of Fiberglass mesh covered with alkali-resistant coating, mass per unit area ≥145

gm/m², mesh size:3.9x4.0 mm ±10% embedded in special polymer modified cementitious Base Coat with hydrophobes and the

corners will be protected with Corner-beads with alkali-resistant mesh wings at least 10 cm wide, mesh mass per unit area min 145

gm/m². The surface will be levelled, finished, made smooth complete in all respect as per manufactures specification and as per

directions of Engineer-in-Charge

Digitally signed by ARTI

DSR-2023 Unit AMOUNT

DSR 2023 RATE/NS

item no./MS DESCRIPTION OF ITEM QTY

Providing and fixing skirting with fibre cement wood subtitute product of superior quality processed through steam and high pressured

system(Auto clave) part of Firm and Flex technology

NS-54 10x300CM with 12mm thk width with necessary fixing -

arrangements and screws, including drilling necessary holes for rawl plugs

etc. all complete.

Supply, Installation , testing & commissioning of UPVC-SWR ( B class ) pipes conforming 'to IS 13592/92 and fittings conforming to IS-

with Fittings - IS 14735, cutting the pipes to required lengths, Installation in position to required grade and level, jointing, making holes,

pockets, chases in walls, floors of all types and making good the same, testing and rectitying leakages for concealed piping within

toilet blocks / Kitchen, sunken slab, plinth etc. complete including all necessary fittings, like Bends, lees, Elbows, Collars, junction,

inspection doors, cowls, offsets, access pipes, rubber rings, jointing with solvent cement followed by application of leak proof adhesive

like FRP paste & laid on floors all complete as per Technical specifications and drawing inside the toilets / kitchen.

Providing and fixing UPVC pipe pressure rated 6kg/cm2 confirming to IS4985 :2000 and moulded fiiting are manufactures as per

IS7834 and fabricated fitting are to be manufactured as per IS 10124 for drains including providing and fixing necessarey fiiitng elbows

tee uinion fitting etc including cutting holes and pockets chasing in the wall or floor as required and making good the same to original

condition after consealing the pipe were required lagging the consealed pipe with hessain cloth dip in a hot black bitumen testing all

completed as per technical specification and drawing of the following diametre(for sink,drains,urinal,WB,washine machine,drains and

anti syponage pipe required).

50mm dia(6kg/cm2 per rated) RMT 20.000 530.00 10,600.00

Supply installation,testing and commissioning of P trap of self cleaning design moulded or fabricated ,if not available in size

NS-57 mentioned below with SS grating with or without vent arm jointing with rubber ring/solvent cement followed by application of leak proof -

adhesive like frp paste including making good the floor etc.all complete as per technical specification and drawing.

Eureka Forbes Sure From Aquaguard Delight NXT 6 L UV + UF Water Purifier (Black)

Supply, Fixing, testing and commissioning of solid state, no touch operating, fully hygienic hand drier 'of approved shade with double

NS-59 blower continuous repeat usage, time delay, 'summer and winter control, music while drying, volume ON/OFF controls 'including nos 5.000 14,086.00 70,430.00

providing necessary brackets, cable from drier to plug. Plug top 'key and lock etc. complete.

Providing and fixing Forged ball valve of approved quality, High or low

pressure, with plastic floats complete :25mm nominal bore

Digitally signed by ARTI

DSR-2023 Unit AMOUNT

DSR 2023 RATE/NS

item no./MS DESCRIPTION OF ITEM QTY

32mm nominal bore Each 1.000 2,143.00 2,143.00

Headwall /Endwall platform for Podium, those platform suitable for Swimming Pool with water recirculation in four sides. It is

composed of an AISI 304 stainless steel frame and plastic grating, Grating should be made of polypropylene composite to resist UV

rays and chemical products present in the water, the grating should have free space of over 45% to facilitate water recirculation,

NS-61 platform can be used as Turning panel and iy should include Anchors for Mounting and for Starting Blocks, Width - 2.5 m. No. 6.000 1,71,185.00 10,27,110.00

Starting Blocks with mounting frames and foundation bolts - The starting block is manufactured using AISI-316 stainless steel. The

standard starting platform can be dismantled to enable assembly of the any electronic timing system. The platform is 550mm long x

NS-62 500mm wide, with a polished finish, and 400 mm high. as per FINA. No. 6.000 88,532.00 5,31,192.00

Float line - 150 mm Dia. anti wave breaker lane ropes made from injected plastic or blown polyethylene balls assembled on polyester

rope designed for high level competitions including SS float line fixing post anchored on the deck with the help of SS anchor,

NS-63 chromed brass float line tightner and SS float line hook, Complete as per FINA Guidlines. No. 5.000 1,12,104.00 5,60,520.00

FALSE START INDICATOR POST- comprising of 2 no stainless steel (S.S) 316 posts each of 48 mm dia and 1.8 m height provided

on either side of the racing pool properly anchored in a suitable anchoring socket on the deck at specified location including one post

provided with pulley and quick cord fixing and loosening device and including false start line comprising of polyester cord and a float.

BACK STROKE TURN INDICATOR POST - comprising of 2 no stainless steel SS 316 posts each of 48 mm dia and 1.8 m height

provided on either side of the racing pool properly anchored in a suitable anchoring socket on the deck at specified location and shall

NS-65 span across the sides including set of flags as per specifications as per FINA. No. 1.000 64,286.00 64,286.00

NS-66 Made of Red & White color plastic, Dia. 24" complete with SS life belt holder and Post. No. 4.000 9,380.00 37,520.00

LIFE SAVING LOOP

NS-67 Made of stainless steel AISI –304 can be connected to telescopic handle by using butterfly nuts, complete with 5 m long telescopic No. 2.000 8,766.00 17,532.00

NS-68 Life Guard Chair Made of stainless steel AISI –304. No. 2.000 99,381.00 1,98,762.00

Circulating Piping -

Supplying & Erection of self priming monoblock pumps of delivering 130 cum / hour against the total head of 14-16 mtrs. made of thermplastic body,

coupled with motor of 7.50 HP and 1450 RPM, suitable for 400/440 volts 3 phase 50 cycles, A.C. with Inbuilt Hair & Lint Strainer in the suction range

NS-69 with Basket Inside. (Working 2 Nos., Standby : 1 No.) No 3.000 2,77,359.00 8,32,077.00

200 mm dia. uPVC Suction valve, Butterfly type with required PVC Stub ends, Flanges and chlome plated nut bolts.

160 mm dia. uPVC Delivery valve, Butterfly type with required PVC Stub ends, Flanges and chlome plated nut bolts.

160 mm dia. uPVC Delivery Non Return Valve, Wafer type with required PVC Stub ends, Flanges and chlome plated nut bolts.

Filter (Horizontal Type) -Totally anticorrosive filter media 2.00 m dia. x 2.50 Mtrs. Long, 1.20 mtr. Filter Bed Depth, Manufactured with fiber glass &

polyster resin, fitted with collector arms & diffuser made from unplastisized PVC & polypropelene, capable of accomodating a flow rate of 130 cum /

Hour @ 30 cum / Hour / Sqm complete with lid in polyester resin & fiber glass, manual air purge, cap for sand discharge & PVC flanged connection

for inlet & outlet.

NS-74 Sillica sand media for filter with granulometry between 0.4 & 0.8 mm Kg 13150.000 23.00 3,02,450.00

NS-75 Gravel for filter with granulometry between 1-2 mm Kg 2100.000 21.00 44,100.00

Digitally signed by ARTI

DSR-2023 Unit AMOUNT

DSR 2023 RATE/NS

item no./MS DESCRIPTION OF ITEM QTY

5-Valve batteries built entirely in PVC with flange connections to filters according to DIN standards. Butterfly valves also in PVC supports made of

NS-76 zinc coated steel pipe with antivibration clamps & fixing plugs. No. 1.000 2,16,229.00 2,16,229.00

CIRCULATION PIPING -

Supply, Install, Testing & commissioning uPVC Piping including necessary fitting such as Elbows, Bends, Sockets, Tees, Collars, Nipples,

Reducers, Stub Ends, diminishing pieces, Solvent Cement, etc. for Swimming Pool Inlet & Drain & Suction piping, Swimming Pool filtration plant

piping, drain pipe along the pipe periphery including all fittings, fixtures and Ceiling/ Wall Support System suitable for following uPVC pipe as

specified and directed.

Isolation Valves - (Pool Inlets) -

160 mm dia. uPVC Inlet valve, Butterfly type with required PVC Stub ends, Flanges and chlome plated nut bolts.

Drain Valves - (Pool Drains) -

160 mm dia. uPVC Drain valve, Butterfly type with required PVC Stub ends, Flanges and chlome plated nut bolts.

Pool Fittings -

NS-80 ABS Plastic Nozzles distributed over the entire area of pool, max. flow - 12 m3/hr.. No 30.000 1,773.00 53,190.00

NS-81 VGB Approved Drain grating in ABS Plastic with Anti Vortex, Size of Grill - 18" x 18" No 3.000 53,103.00 1,59,309.00

Supply and Installation of SS-304 Plate type hair strainer of Min. thk. 3 mm for gutter connecting S. Pool Overflow Gutter to Balancing tank upto

NS-82 size 450 x 600 mm or as per site condition and as per direction of Engineer-in-Charge. No 1.000 22,428.00 22,428.00

S.S.316 Ladder (4 Step) SS ladder with polished stainless steel hollow pipe of 43mm Dia. and of 14 gauge(1.6mm) thick, Anti-slip stainless steel

NS-83 steps with anchoring fixtures. No 4.000 44,919.00 1,79,676.00

S.S.316 Ladder (5 Step) SS ladder with polished stainless steel hollow pipe of 43mm Dia. and of 14 gauge(1.6mm) thick, Anti-slip stainless steel

NS-84 steps with anchoring fixtures. No 2.000 50,800.00 1,01,600.00

Pool Cleaning Equipments -

Trolley mounted Plastic Self Priming centrifugal pump set 3 HP, 1 Phase 230 V directly coupled with motor on suitable S.S. 304 angle iron frame

work provision of small switch board comprising of ICTPN 32 Amps, DOL starter of suitable capacity and control wiring with copper cable.

Metallic vacuum head in S.S.,2 Ft. Long, connection external 2” to fit hoses, fork in Stainlesss Steel. for connection.

Extensible handles for cleaning attachments in anodized aluminium which can be adapted to the entire range of cleaning equipment, brushes, leaf

NS-87 skimmers and scoops, 7.5 mtrs. Long. No 1.000 11,222.00 11,222.00

Transparent plastic vacuum hose 2” dia 30 mtrs. long including hose cuffs for connection to suction inlets.

Deep bag net made in polypropylene and white polyester netting butterfly nut connection.

Curved brushes made in polypropylene for pool basis and scum liners.

Algae brushes with stainless steel bristles.

Pool Testing Equipments -

Test kit suitable for measurement of residual Chlorine and pH

NS-93 Overflow Grating 445 mm wide in uv stabilised PP complete. Mtrs 83.000 2,956.00 2,45,348.00

Digitally signed by ARTI

DSR-2023 Unit AMOUNT

DSR 2023 RATE/NS

item no./MS DESCRIPTION OF ITEM QTY

Providing and fixing floor Door buffer of minimum 75 mm length, required colour and shade, made of PVC/rubber, with necessary

NS-94 screws/fittings etc. complete in all respect as approved by engineer in charge each 9.000 86.00 774.00

Providing and fixing chrome plated grating with ring and two S.S screws of approved design with grating screwed down to the ring with

s/s screws and embedding and setting ring into the floor with cement mortar .(As per approved make or equivalent)

Providing and fixing uPVC pipes type -B conforming to IS: 13592 for soil, waste and vent pipes including all fittings rubber ring type

(plain or with access door) e.g. bends, junctions, cowls, offsets, access pieces, jointing with rubber ring joints with lubricant etc. fixed

with clamps to walls.

For soil, waste and vent pipes -

110 mm OD (6 kg pressure) Metre 25.000 728.00 18,200.00

Providing and fixing SS sliding door bolts as per approved makes with necessary fittings complete in all respect as per direction of

Engineer-in-charge

Providing and fixing SS handles chrome finished, ISI marked, with necessary screws etc. complete :

Supply, installation testing & commissioning of submersible pumping set suitable to operate on 410 volts 3 phase 50 HZ A.C.

power supply including water proof joint , earthing connection, motor control panel complete in all respect as per details given

below : (For Borewell) Discharge: Min 150 lit/minute

Head: Min 40 m HP Load Min. 1.5

Providing and laying waterproofing treatment using Membrane waterproofing system for Swimming pool, Kids Pool , Drain channel

and Balancing tank Horizontal & Vertical surface or wherever required as per approved chemicals, methodology, manufacturer

specifications & instructions of Engineer-in-charge. Work to include all labour and material, equipments, leveling, cleaning the base

surface, roughening / hacking, chipping off unwanted material/mortar & all necessary grouting wherever required, curing, all lead & lift

at all level, testing for water tightness, making good if necessary etc complete. Quoted rate shall include providing and making

NS-100 waterproofing treatment for all core cuts, under water lights as per the approved methodology directed by Engineer in charge. Sqm 754.502 3,365.00 25,38,899.23

Providing and laying Porcelain pool tile of size 245 mm x 120 mm (likely size) and thickness 7 mm conforming to FINA (Federation

International De Nation) Standard on horizontal and Vertical surface (Floor and Side Walls) in swimming pool of approved

manufacturer and of shade approved by architect or engineer in charge like Light Blue / Aqua Blue etc. laid in approved pattern on 3-

6 mm ( 5mm average) thick bed of adhesive mortar of Polymer modified cementitious adhesive in conjuction with polymer modified

liquid mixed in required porportion as specified by manufacturer including filling / scaling of joints 2-3 mm thick between the tiles

with epoxy grout of with matchingcolour pigment to make it water tight and finished neat complete as per direction of Engineer-in-

Digitally signed by ARTI

DSR-2023 Unit AMOUNT

DSR 2023 RATE/NS

item no./MS DESCRIPTION OF ITEM QTY

Providing and laying Porcelain pool tile of size 245 mm x 120 mm (likely size) and thickness 7 mm conforming to FINA (Federation

International De Nation) Standard on Horizontal and Vertical surface (Side Wall) for Lane Marking in swimming pool of approved

manufacturer and of shade approved by architect or engineer in charge like Cobalt etc. laid in approved pattern on 3- 6 mm ( 5 mm

average) thick bed of adhesive mortar of Polymer modified cementitious adhesive in conjuction with polymer modified liquid

mixed in required porportion as specified by manufacturer including filling / scaling of joints 2-3 mm thick between the tiles with epoxy

grout of with matchingcolour pigment to make it water tight and finished neat complete as per direction of Engineer-in-Charge.

Providing and laying Porcelain Petit Carre Finger Grip Tile with Safety Marking of size 245 mm x 120 mm (likely size) and thickness

19 mm conforming to FINA (Federation International De Nation) Standard on Horizontal surface (Coping) in swimming pool of

approved manufacturer and of shade approved by architect or engineer in charge like Cobalt etc. laid in approved pattern on 3- 6 mm

( 5 mm average) thick bed of adhesive mortar of Polymer modified cementitious adhesive in conjuction with polymer modified liquid

mixed in required porportion as specified by manufacturer including filling / scaling of joints 2-3 mm thick between the tiles with epoxy

grout of with matchingcolour pigment to make it water tight and finished neat complete as per direction of Engineer-in-Charge.

Providing and laying Porcelain Petit Carre Antislip Tile with of size 245 mm x 120 mm (likely size) and thickness 7 mm conforming to

FINA (Federation International De Nation) Standard on Horizontal surface (Coping) in swimming pool of approved manufacturer and

of shade approved by architect or engineer in charge like unglazed etc. laid in approved pattern on 3- 6 mm ( 5 mm average) thick

bed of adhesive mortar of Polymer modified cementitious adhesive in conjuction with polymer modified liquid mixed in required

porportion as specified by manufacturer including filling / scaling of joints 2-3 mm thick between the tiles with epoxy grout of with

matchingcolour pigment to make it water tight and finished neat complete as per direction of Engineer-in-Charge.

Providing and fixing in position best Indianshower rose 200mm dia body and face chromeplated, brass made body, Silicon

based Rubbit cleaning nozzles .(Premium Range)

Providing and fixing in position best Indian (bonut size 24mm, ceramic disc size 19mm and min. body thickness 2mm,

nickel plating 0.10 micron and chrome plating 0.3 micron, quarter turn) 2- way Bib Cock .(Premium Range)

Providing and fixing in position best Indian Health Faucet with 8mm dia 1 meter long Flexible Tube and wall bracket with N.

R. V. (non-return wall).(Premium Range Sanitary Ware)

Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Soap Dish

Holder. (Premium Range)

Providing and fixing in position best Indian C. P. Brass made (0.3 micron Chrome and 10 micron Nickel plated) Soap

Dispenser with MetallicBottle. (Premium Range)

Providing and fixing of carbon-di-oxide type fire extinguishers consisting of welded M.S. cylindrical body,Squeeze lever discharge

valve fitted with pressure indicating guage internal discharge tube 30 cms long high presssure discharge hose,discharge no

Digitally signed by ARTI

DSR-2023 Unit AMOUNT

DSR 2023 RATE/NS

item no./MS DESCRIPTION OF ITEM QTY

Providing and fixing of ABC Power type fire extinguishers consisting of welded M.S. cylindrical body, squeeze lever discharge valve

NS-111 fitted with pressure indicating gauge internal discharge tube 30 cm long high pressure discharge hose, discharge nozzle, suspension -

bracket. Conforming to IS: 15683 finished externally with red enamel paint fixed to wall with brackets complete with internal charge.

Capacity 6kg Each 3.000 3,647.00 10,941.00

NS-112 Providing and fixing neoprene rubber in between wall frame and foundation Sqm 203.000 344.00 69,832.00

Supply and Installation of Moisture/fire resistant cement fiber board(high pressure steam cured) category III type A

conforming to IS 14862:2000 in wall panels on external faces of galvanized cold formed light guage steel frame structure

to form wall/Partision wall on external faces of the frame fixed with self drilling/tapping screw/fasterners of approved

make.The hollow wall space between two cement fiber board will be provided with 50mm thick resin bonded glass wool

insulation conforming to IS 8183 and of density not less than 48kg/cum(glass wool insulation shall be paid sepaerately ).All

exterior faces of the wall/frame shall essentially be provided with breathable vapour barrier underneath the cement fiber

board.The installation of the vapour barrier should conform to the provision of international building code 2009 and as per

design.the joint of the cement board must be sealed with polymer modified thin set mortar conforming to ANSI A 118.4

standard and self adhseive alkali resistant dry wall fiber mesh tape of minimum 100 mm width.All exterior wall corner of

cement fiber board wall panels must be reinforced with glavanized metal angles of 100mmx100mmx1.09mm thickness

and fixed on both adjoining walla with self drilling/tapping fasterners of approved make as per design including providing

silicon gel caulking complete in all respects.

10mm thick cement fiber board category 3 type A(10x2=20) Sqm. 559.236 1,200.00 6,71,083.20

Providing and Fixing white vitreous china flat back urinal of approx. size 600x390x370 mm having spreader/angle valve for flushing Each 3.000 11,924.00 35,772.00

with water, having water inlet from back side, including bottle trap and fixing to wall with suitable brackets all as per manufacturers

NS-114 specification and direction of Engineer-in-charge

NON SCHEDULE SUB TOTAL ₹ 807,89,472

Total Amount (Schedule+Non Schedule) 1222,95,967.69

Total Amount (Schedule+Non Schedule) 1222,95,967.69

Digitally signed by ARTI

Name of the Work- :“Development of sports facilities such as indoor sports complex, swimming pool, outdoor sports arena, supply and fixing of different sports equipment, open gym etc. for RLBCAU at Jhansi UP.”

ESTIMATE FOR Electrical work

DSR- Description of Item Unit Qty DSR Rate Enhanced Rate with 18% DSR Amount

(by CPWD Multiplying factor

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper

conductor single core cable in surface / recssesd medium class PVC conduit, with modular switch, modular

plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor

single core cable etc. as required.

Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without

independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in

surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper

conductor single core cable etc as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated

copper conductor, single core cable in surface/ recessed steel conduit as required

1.17 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the

existing surface/ recessed steel / PVC conduit as required.

Supplying and fixing PVC conduit ISI marked alongwith the accessories in conealed system including

painting etc. as required

1.21.2 P.V.C Conduit 25 mm mediuam class Pipe Mtr 452 145.00 154.18 69689.36

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess,

including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular

switch, connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess,

including providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, Each 31 586.00 623.09 19315.79

connections etc. as required.

Installation, testing and commissioning of wall bracket /ceiling fittings of all sizes and shapes containing

upto two GLS/CFL/ LED lamps per fitting, complete with all accessories including connections etc. as Each 210 119.00 126.53 26571.30

Supplying and fixing stiff pendent with 300 mm long, 20 mm dia X 1.6 mm thick steel conduit, aluminium

cast back plate and brass holder complete, including wiring the down rod with 1.5 sq. mm FRLS PVC

insulated, copper conductor, single core cable and

painting etc. as required.

Digitally signed by ARTI

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard

length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, Each 25 276.00 293.47 7336.75

including providing and fixing phenolic laminated sheet cover on the fan box etc. as required

1.5 Installation of exhaust fan in the existing opening, including making good the damage,

connection, testing,

commissioning etc. as required.

MCCB, MCB & DB'S

Providing and fixing following rating and breaking capacity and pole MCCB in existing cubicle panel board

including drilling holes in cubicle panel, making connections, etc. as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on

surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, erconnections,

powder painted including earthing etc.

as required. (But without MCB/RCCB/Isolator)

Supplying and fixing following way, Threel pole and neutral, sheet steel, MCB distribution board, 415 V, on

surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, erconnections,

powder painted including earthing etc.

as required. (But without MCB/RCCB/Isolator)

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker

suitable for inductive load of following poles in the existing MCB DB complete with

connections, testing and

commissioning etc. as required.

2.10.2 Single Pole and Neutral Each 8 599.00 636.92 5095.36

2.10.5 Triple Pole and Neutral Each 4 1228.00 1305.73 5222.92

Supplying fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with

connection tesing and commissioning etc. as required.

Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal

enclosed plug top alongwith 20 amps “C” curve, SP, MCB, in sheet steel enclosure, on surface or in

recess, with chained metal cover for the socket out let and complete with connections, testing and

commissioning etc. as required.

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing

masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. Each 3 13838.00 14713.95 44141.85

with charcoal/ coke and salt as required.

Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required. Metre 88 155.00 164.81 14503.28

Digitally signed by ARTI

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1

KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.

7.5.2 Above 35 sq.mm and upto 95 sq.mm Metre 750 57.00 60.61 45457.50

7.5.3 Above 95 sq.mm and upto 185 sq.mm Metre 150 77.00 81.87 12280.50

Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC

collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and

refilling etc as required.

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket,

bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in

ground (75 cm below ground level) including excavation and refilling the trench but excluding sand

cushioning and protective covering etc. , complete as required.

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with

Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos.

canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value

(CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), Each 26 2730.00 2902.81 75473.06

THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories

including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more

than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

Digitally signed by ARTI

NON DSR Electrical Items

Schedule-B Internal Electrification ITEM NON DSR

Sr No. Description of Item Unit Qty NS Rate -

Sub-Head-I: Light fixtures

NS-1.1 Supplying and fixing recessed mounting 15 W LED down lighter, LED of 1 to 3 W each assembled on

single MCPCB, having color temp 6500K & having 50000 burning hrs life with minimum 2 Yrs Guarantee

certificate from manufacturer.

NS-1.2 Supply and fixing Highbay light with high power LED of 100 Watt each assembled on single MCPCB and

addional unique peanut lense on each 40 15751.00 630040.00

NS-1.3 Supplying, fixing & testing of approved make of 85 watt LED roadway / street light luminaire with epoxy

sheet aluminium / steel housing with epoxy white powder coated CRCA sheet steel gear tray ,clear acrylic

cover with necessary materials connection including mounting with GI pipe 32 mm OD, clamps on existing 4 4876.00 19504.00

wall / pole etc. complete as required

NS-1.4 Supply of 300 mm sweep Hevy duty Exhaust fan suitable for single phase, 230V, AC supply

complete with motor, capacitor louvers, mounting brackets,plug top, all accessories of approved make.

NS-1.5 Supply of 200/225 mm PVC Body sweep Fresh Air fan suitable for single phase, 230V, AC supply

complete with motor, capacitor louvers, mounting brackets, all accessories of approved make.

Underwater Lights

NS-1.6 Supplying & Erection Underwater led Light with S.S. 316L Housing, 45 w/12 v, White color, complete with

Polystrene Niche, 3.0 m long cable, Plastic Conduit Hose,Junction Box in ABS Plastic with 3 entries of 3/4 "

and 50 VA Step down transformer with IP65 Rating. 20.00 21,803.00 436060.00

NS-1.7 Electrical Cabling for Underwater Lights of Copper Armoured cable Enclosed in PVC Conduit.,

4.00 Sq. mm x 3 Core

NS-1.8 Electrical Control Panel for Filtration Plant Pumps and Chlorine Dosing System factory made, Suitable for

415V, 3 phase, 4 Wires, 50 Hz, fabricated out of 16 SWG CRCA steel Sheet, IP 52, Star delta starters with

SPP, 3 Nos. of phase indicating lights,Voltmeter, Selector Switches, Protective fuses.includes all required

cabling from Panel to Pumps with Cable, Cable Trays, Conduits, ect. within Plant Room. 1.00 2,10,001.00 210001.00

NS-1.9 Electrical Control Panel for LED Underwater Lights, factory made, Including separate trasnfomers for each

LED Underwater Light , suitable for 415 V, 3 phase, 4 Wires, 50 Hz, fabricated out of 16 SWG CRCA steel

Sheet, IP 52, Floor mounting type with phase indicating lights, Selector Switches, Protective fuses.The

board includes removable gland plates.

Digitally signed by ARTI

NS- Supply, installation, testing & commissioning of online 3KVA fully Microprocessor Based UPS System

1.10 suitable for Single phase, AC 50 Hz. input supply comprising of following features.High Frequency PWM

Inverter using IGBT Technology Manual by pass switch LCD disply SMF VRLA Batteires with 30 minutes

back up time for full load including interconnecting cables Battery Rack. 1.00 70,992.00 70992.00

NS-2 SUB HEAD - II :DISTRIBUTION PANEL WORK .

The contractor shall consider the following details in their item rates, wherever required:

1 Supporting rigid steel framework.

2 Cubicle type, 14 gauge CRCA sheet steel enclouser.

3 Complete with interconnections and distribution bus bars.

4 Proper bonding to earth.

5 Painting/lettering on Breakers and distribution boards, the location they serve, providing on each panel its

circuit diagram.

6 Providing cable clamps / supports within distribution boards cable alley.

7 TPN ACB’s / MCCB’s shall mean 3 pole ACB’s / MCCB’s with adequate size of neutral link.

8 All MCB’s shall be of minimum 10 KA breaking capacity.

9 All motor feeders MCCBs shall be of motor duty.

10 Distribution panels shall be Powder Coated with Siemens gray paint shade no. RAL-7032 of IS-5.

11 Degree of protection for following type of distribution panel enclosure shall be as per IS:13947-1993.

12 IP 42 for indoor panels.

13 IP 54 for kitchen and laundry panels.

14 IP 55 for outdoor panels

15 All MCCB’s shall be provided with operating mechanism for door interlock.

16 Current density of aluminium shall be 1 sq mm for 1.0 amps for rated current of bus bars and current

density of copper shall be 1 sq.mm for 1.25 amps for rated current of bus bars.

17 Tinned copper earth bus shall be provided through out the length of each board.

18 All measuring instruments (Meters) shall be of digital electronic with LED of approved make and compatible

19 All hinged door shall be earthed through 4.0 sq mm tinned braided copper wire.

20 All panels shall have provision of the following:

Pad locking of Switch board doors.

Pad locking of MCCB’s handles in “OFF” Position.

21 Additional set of C.T.s, potential free contacts, connectors, contactors with wiring etc are to be provided for

BAS including space required for various transducers in Main Switch Board sections. Only transducers

shall be supplied by BAS contractor.

22 All MCB’s used for protection of resistive and lightly inductive load shall be type “B” characteristic and

inductive (motor) load shall be of type “C” characteristic and discharge lamps and UPS etc. shall be of type

D characteristic.

23 All incoming and outgoing air circuit breakers shall be placed on middle portion of the vertical in single tier

24 All PTs / control transformer shall be provided with centre tap earth secondary.

Digitally signed by ARTI

25 All DOL & Star-Delta Starters shall be provided with SPPR (single phase preventor relay) and 2 nos. of

Aux.Contacts for Remote operation/monitor.

26 The Panel fabricator shall provide Al./ Copper Bus-bars link from Breakers wherever more than two nos. of

cables are terminated in the breakers.

27 Readymade 16 SWG Sheet steel Enclosure with cutout For MCBs

28 The breaking capacity of MCCB’s are mentioned panel wise. All MCCB’s shall be with thermal magnetic

releases upto 250 amps and miroprocessor based above 250 amps capacity, unless specified otherwise.

29 Protection Releases Microprocessor based (PRMB) & Thermal magnetic (PRTM) shall be as described

A Protection Release Microprocessor Based (PRMB-1)

Over-current/long time protection range 40% - 100 % with Time setting

short circuit /short time protection range 100% - 1000 % with Time setting

Instantaneous short circuit Protection range 150% - 1200 % with Time setting

Earth Fault Protection range 20% - 100 % with Time setting

Under voltage & over voltage protection

Current unbalance

Power (Active,Reactive & Apparent)

Energy ((Active,Reactive & Apparent)

B Protection Release Microprocessor Based (PRMB-2)

Over-current/long time protection range 40% - 100 % with Time setting

short circuit /short time protection range 100% - 1000 % with Time setting

Instantaneous short circuit Protection range 150% - 1200 % with Time setting

Earth Fault Protection range 20% - 100 % with Time setting

C Protection Release Microprocessor Based (PRMB-3)

Over-current/long time protection range 40% - 100 % with Time setting

Instantaneous short circuit Protection range 150% - 1200 % with Time setting

D Protection Release Thermal-Magnetic Based (PRTM)

(Note:The contractor may select the next higher fault rating of MCCB if it is not readily available ,without

any extra cost ,as the figure indicated within the bracket are required maximum fault level of the panel).

FRONT OPERATED PANEL

Digitally signed by ARTI

Supply, installation, testing and commissioning of front operated, front access, totally enclosed, free

standing, dust and vermin proof Panel with IP65 ingress protection, fabricated from 2 mm thick CRCA

sheets, with hinged, gasketted and lockable doors including the cost of interconnections, copper crimping

lugs, brass glands, bonding to earth and painting, suitable for use at 415 volts, 3 phase 4 wire 50 Hz

system with 31 MVA rupturing capacity at 415 volts complete as per specifications, as required and as

2.1 Feeder PilLAr A (IP-65)

1 No. 630 amps 4P MCCB (25 KA) with thermal Magnetic release (PRMB-3) with Class-C transient voltage

surge suppression device suitable for 3 phases as per specifications.

B METERING & INDICATION FOR EACH INCOMER

i) 1 set of R,Y,B phase indicating lamps

1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB

iii) 1 No. (0-630A) Ammeter with ASS with 3 nos. 600/5A CT's

iv) 1 No. Digital Electronic KWH meter(Dual Source).

one three phase digital energy meter for electricity consumtion with CT and PT

1 Set of 800A TPN Aluminium Bus Bar with colour coded PVC Sleeves

i) 5 Nos. 200A TP+NL MCCB (25 KA)

Feeder Pillar-5 (IP-65) as described above Set 1 2,77,932.00 277932.00

2.2 Feeder Pillar-sport (IP-65)

1 No. 160 amps 4P MCCB (25 KA) with thermal Magnetic release (PRMB-3) with Class-C transient voltage

surge suppression device suitable for 3 phases as per specifications.

B METERING & INDICATION

i) 1 set of R,Y,B phase indicating lamps

1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB

iii) 1 No. (0-160A) Ammeter with ASS with 3 nos. 160/5A CT's

iv) 1 No. Digital Electronic KWH meter(Dual Source).

one three phase digital energy meter for electricity consumtion with CT and PT

1 Set of 200A TPN Aluminium Bus Bar with colour coded PVC Sleeves

i) 3 Nos. 100A TP+NL MCCB (25 KA)

Feeder Pileer-1 (IP-65) as described above Set 1 1,55,445.00 155445.00

2.3 Main External Lighting panel (IP-65)

1 No. 160 amps 4P MCCB (25 KA) with thermal Magnetic release (PRMB-3) with Class-C transient voltage

surge suppression device suitable for 3 phases as per specifications.

B METERING & INDICATION

i) 1 set of R,Y,B phase indicating lamps

1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB

Digitally signed by ARTI

iii) 1 No. (0-160A) Ammeter with ASS with 3 nos. 160/5A CT's

iv) 1 No. Digital Electronic KWH meter(Dual Source).

1 Set of 200A TPN Aluminium Bus Bar with colour coded PVC Sleeves

i) 8 Nos. 63A TP+NL MCCB (25 KA)

Main External Lighting panel (IP-65) as described above Set 1 220147 220147.00

2.4 Sub External lighting Feeder pillar

1 No. 63A,4P MCCB (25kA) and ON/OFF indicating lamps.

1 No. 63A, 3 phase Timer Switch for automatic operation.

B METERING & INDICATION

i) 1 set of R,Y,B phase indicating lamps.

1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB.

iii) 1 No. (0-160A) Ammeter with ASS with 3 nos. 160/5A CT's.

one three phase digital energy meter for electricity consumtion with CT and PT

1 Set of 100A TPN Aluminium Bus Bar with colour coded PVC Sleeves.

Ten(10) nos 25 Amp 4P MCB, 10 KA.

Sub External lighting Feeder pillAr described as above Set 2 2,25,506.00 451012.00

NS-2.5 Supply, Erection, Testing & Commissioning of Main Distribution Board shall be metal enclosed, single or

double front, indoor type, surface mounting on floor/ wall/ coloumn/ structure mounted with

compartmentalized construction type, constructed out of 2.0 mm thick CRCA sheet steel frame,

1.6mm thickThe quoted price of Distribution Board shall include cable glands and lugs of suitable sizes

for all incoming

& outgoing feeders

INCOMER: 125 Amp, 415 Volts, Microprocessor based TPN MCCB - 01 No

Digital type voltmeter with selector switch with 2A backup MCB -3 Sets

Digital type ammeter (0-100Amp) with selector switch and 1 set of 3 Nos.CT's of ratio 100/5A, Class-1

accuracy and 15 VA burden -1 Set

3 Nos. Phase indicating LED lamps with 2 Amp backup MCB as required - 2 Sets

BASBAR : 160 Amp, 415 Volts, TPN AL - 1 set

OUTGOING: (i) 100A TPN MCCB - 3 Nos. (ii) 32 Amp, 415 Volts, SPN MCCB - 03Nos.

indicating lamps with fuses. 1 277501.00 277501.00

NS-3 SubHead-III: Supply of MV cable

Supply, following sizes of PVC sheathed PVC/XLPE insulated Aluminium conductor/copper conductor

power/ multicore control armoured cable of 1.1 KV grade.

NS-3.1 3 ½ C - 150 sq mm Aluminium Metre 150 1576.00 236400.00

NS-3.2 3 ½ C - 95 sq mm Aluminium Metre 450 974.00 438300.00

NS-3.3 3 ½ C - 50 sq mm Aluminium Metre 300 697.00 209100.00

NS-3.4 3 ½ C - 35 sq mm Aluminium Metre 60 596.00 35760.00

NS-3.5 4 C - 25 sq mm Aluminium Metre 50 547.00 27350.00

NS-3.6 4 C - 16 sq mm Aluminium Metre 50 354.00 17700.00

NS-3.7 4 C - 6 sq mm Aluminium Metre 1400 287.00 401800.00

Digitally signed by ARTI

Sub head -IV-13 METER HIGH MAST : SUPPLY & INSTALATION

NS-4 Supply, instalation, testing & commissioning of 13 Mtr High Mast System hot dipgalvanised (singledip) and

suitable for wind velocity as per IS875 part3, with lowering and raising motorized unit, with carriage

assembly for 6 Luminaries and its control gear box, lighting stand and avaition light and lightning arrestor.

be in three finished sections.It shall also include accessories for 13 Mtr high mast including head

frame,steel wire rope 6mm dia,trailing cable,double drum winch,galvanized lantern carriage arrangement

suitable for 6 luminaires symmetrically & its control gear boxes and lighting finial with internal power tool.

Supply, instalation, testing & commissioning of foundation bolts manufactured from special steel alongwith

nuts,washers, anchor plates & templates.

Supply, instalation, testing & commissioning of control panel with suitable control curcuit for automatic

switching ON and OFFof the mast. It shall also have suitable controls for operation of Power Tool.

Supply, instalation, testing & commissioning of 400W non integral LED flood light luminaire with pressure

die cast aluminium housing & heat resistant toughened flat glass(IP 65) complete with external single

control gear box

Sub-Head - XVI- EXTERNAL VIDEO SURVEILLANCE SYSTEM (IP CCTV)

Supply, installation, testing and commissioning of 2 megapixels resolution Network Bullet camera

camera,Imager 1/2.8” Progressive Scan CMOS,Video Compression. .H.264/MJPEG,Day/Night-IR Cut

Filter,Minimum Illumination-0Lux/F1.4(IR ON) IR Range-Up to 50 Meter,Electronic Shutter-

Auto/Manual(1/25~1/10000), Lens 2.8 to 12 mm Motorized zoom Lens,Resolution Main-

1920x1080p,Digital Noise Reduction-3D,Wide Dynamic Range-120db, Behavior Analysis-Line crossing

detection, intrusion detection, unattended baggage detection, object removal detection.Support Face

Detection. Region of Interest Support 1 ROI per stream.Power Consumption and Current- 12 VDC, 1.2A,

max. 14.5W PoE (802.3at, 42.5V to 57V), 0.5A to 0.1A, max. 16.5W.Protection Level IP67, IK10 TVS

2000V Lightning Protection, Surge Protection and Voltage Transient Protection.Regulatory UL, CE,

FCC.Operating Conditions Temperature: -30 °C to +60 °C (-22 °F to +140 °F).Humidity: 95% or less.

Digitally signed by ARTI

Supplying of 1/2.8’’ Progressive Scan CMOS PTZ Dome Camera with laser IR,Compression-

H.264/MJPEG/MPEG4,Focal Length - 4.3-129mm, Optical zoom 30x and digital zoom 16x,Max. Image

Resolution-1920×1080,Frame Rate 50Hz: 25fps(1920×1080) 360° endless pan range and -2°-90° tilt

range,240°/s Pan Preset Speed and 200°/s Tilt Preset Speed,0.1°-160°/s Manual Pan Speed and 1°-

120°/s Manual Tilt Speed,256 presets programmable; preset image freezing capability ,8 patrols, up to 32

presets per patrol 4 patterns, with the recording time not less than 10 minutes per pattern,SD/SDHC card

local storage Support up to 8 NAS storage; Edge recording (transmit the videos from SD card to the NAS

after network resumed) High performance Laser IR LED covering up to 500m (IR) distance 3D intelligent

NS-5.2 positioning function,3D DNR,Protection Level-IP66 standard,TVS 6,000V lightning protection, surge Each 1.00 2,93,044.00 293044.00

protection and voltage transient protection.

Supplying of 2U Rack mount single chassis Network Video Recorder with dual Gb NIC, 1 DVI-I + HDMI + 1

Display Port, max 2 simultaneous monitors, RS-232/485 serial port, DVD, Server Operating System-

Windows 10,Ubuntu Linux 16.04, Processor-Gen 4 Intel Core i3, Local Client Display Rate (FPS)Windows

– 700 FPS (HD)Linux – 900 FPS (HD),High Performance, High Reliability IP Recorder. — Continuously

records 300Mbps (Windows) & 450 Mbps (Linux)of video while hosting a local client, multiple remote

clients and the web server on a single server,RAM-4 GB, 8 GB, 12 GB (Optional)solid-state operating

system drive,USB-6 x USB 2.0, 2 x USB 3.0 high air flow cooling and hardware monitoring features ensure

maximum uptime. keyboard and mouse, Professional Grade client and server software pre-installed and

software updates. Access live and recorded video on multiple client PCs with free Windows, Mac or Linux

client application. web server application is pre-installed on the server to access video through a web

NS-5.3 browser or free Mobile iPhone / iPad and Android apps. Maximum Storage Capacity 30TB & Maximum Each 1.00 6,63,594.00 663594.00

Hard Drive 3 Slot(Up to 10TB) Support Up to 64 IP Camera.

Supply, installation, testing and commissioning of Enterprise Class 6TB HDD.

Digitally signed by ARTI

Supply, installation, testing and commissioning of Video Management System (VMS) software shall be

used to view live and recorded video from capture cards and IP devices connected to local and wide area

networks. The VMS software shall have a client/server-based architecture that can be configured as a

standalone VMS system with the client software running on the server hardware and/or the client running

on any network-connected TCP/IP workstation. Multiple client workstations shall be capable of

simultaneously viewing live and/or recorded video from one or more servers. Multiple servers shall also be

able to simultaneously provide live and/or recorded video to one or more workstations. The VMS server

software shall also have the ability to be installed on an IP edge device—such as an IP camera or encoder

that allows for 3rd party applications—allowing the device to serve as both a server and IP video recording

device.The VMS shall not charge for the number of concurrent clients (min. 50 thick clients and 16 mobile

clients to be provided along with VMS).

Supply & Laying of outdoor armoured 4-pair Category 6 cable as per TIA-568C.2, The cable should be

tested till 250 MHz , Shall be Fire-Retardant, Low-Smoke & Zero-Halogen as per IEC 60332-1, IEC 61034-

2 & IEC 60754-1 respectively.

Supply, installation, testing & commissioning of Feeder Pillar having IP55 Outdoor 17U Network Rack with

Hood and FAN For Field Devices. The Rack box shall be provided with external earthing lugs 5 socket

Power terminaton with MCB or More Proper/Steady fixing through RCC base as per site requirements is

under bidder’s scope.

Supply, installation, testing & commissioning of 12 Port PoE+ Switch with 2 SFP slots 12 x 10/100/1000

Base-T PoE+ ports and additional 2 100/1000X SFP PORTS Should support PoE+ as per IEEE 802.3 at

with PoE budget of 100W.Should support STP, RSTP, MSTP, IGMP v1/v2/v3 snooping, STP root guard,

Voice VLAN, MLD snooping (MLDv1 and v2), IEEE 802.3ac VLAN tagging IEEE 802.17/equivalent for sub

50ms ring protection in following scenario : single, dual fibre cuts in ring and when fibre cut at common

shared link in between two or more rings.

Supply and fixing of 7.0 Mtrs G.I. Octagonal Pole (70 mm A/F (Top) x 130 mm A/F (Bottom) x 5 mm thick

with base plate of 250 x 250 x 16 mm, 4 nos. 600 mm long M20 foundation bolts & hardwares (suitable

reinforcements to be inserted in the foundation and 40mm x 2 nos. GI pipes for In/Out of main cables) Any

other accessories etc. required complete in all respect as per direction of Engineer in charge. The pole

shall also be provided with recessed lockable GI junction box of suitable size and flush door at the bottom

NS-5.9 with proper Each 4.00 48,245.00 192980.00

strengthening for the cutout of the door opening of junction box. The cost of RCC foundation shall be

Supply, installation, testing & commissioning of IP55 Outdoor Junction Box For Field Devices at camera

side. JB must be of appropriate size to house different components as per CCTV system design

NS- confirming. The junction box shall be fixing along with weather proof clamping with pole as per site

5.10 requirement.

Digitally signed by ARTI

Supplying, Installation,Testing & Commissioning of 40 " LED Full HD TV Resolution 1920 x 1080 ,Contrast

Ratio (Typical) 5000:1,Built-in Speaker (10W + 10W), Magic Clone (to USB), Auto Source Switching &

Recovery, Lamp Error Detection, Super Clear Coating, Temperature Sensor, Plug and Play (DDC2B),

Pivot Display, Clock Battery, PIP/PBP, Video Wall (10x10), Image Rotation, Button Lock, HDCP Support,

NS- Smart Scheduling, Smart F/W update, Built-In MagicInfo Premium-Swith Mounting Brackets as per

5.11 Technical Specification complete in all respect.

Supply, installation, testing & commissioning of online 1KVA fully Microprocessor Based UPS System

suitable for Single phase, AC 50 Hz. input supply comprising of following features.High Frequency PWM

Inverter using IGBT Technology Manual by pass switch LCD disply SMF VRLA Batteires with 30 minutes

back up time for full load including interconnecting cables Battery Rack. Each 2.00 31,963.00 63926.00

TOTAL Non DSR Electrical cost 10137118.00

Total DSR and non DSR amount 11710452.84

Digitally signed by ARTI