Construction of road (150 mtr approx) from main road of Depot to bldg No T-53 (Sugar Shed) of Sup Depot at JRC under GE (East) JRC

Amount

Surface excavation n.exc 30cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed.

Excavating in trenches n exc 1.5m wide and n exc 1.5m in depth complete all as specified.

M&L for removal of surplus spoil to a distance n exc 50m and depositing where directed at a level n exc 1.5m above the starting pointas specified.

M&L for rolling and consolidattion of formation surface in cutting of roads/berms etc to the reqd level, gradient and camber with 8 to 12 tons power road roller incl filling in depressions which occure during process with approved earth.

Material & Labour for 150mm thick solling (or sub base) with broken boulder crushed/ broken stone interstices filled suface formed and rolled with 8 to 12 tones power roller to reqd camber and gradient complete all as specified and directed.

Material & Labour for 150mm thick (compacted thickness) in (two layers 7.5cm thick) each water bound macadom with graded broken stone aggregate of grade (40mm to 90mm) granite trap or basalt, spread, levelled, rolled and consolidated to reqd gradient camber and rolled with 8 to 12 tonne power road roller all as specified.

Material & Labour for preparing surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a priming/ tack coat with bitumen VG-10 @ 10 kg per 10 Sqm of road surface and laying 40mm thick bituminous premixed asphaltic semi dense concrete with 5.5% binder content VG-30 by weight of total mix with mechanical paver rolled and compacted to required camber and gradient and rolled with 8 to 12 tonne power road roller to required gradient and camber complete all as specified and directed.

Material & Labour precast cement 1:2:4 Type B1 (using 20mm graded aggregate) as in road kerbs or mud stops set in CM 1:4, including wearthering, slightly rounded or chamfered angles and throating, as directed

Material & Labour for cat eye ABS plastic with nail of Size 120x120mm, 43mm reflective glass colour white/red/yellow provided with steel zinc plated with bolt of 12mm dia length 120mm for fixing to road by hammering complete all as specified and directed.

Material & Labour two coat of synthetic enamel painting to kerbstone or conc surface over on coat of priming paint plaster including preparation of new surface complete all as specified and directed.

Material & Labour for preparing bituminous surface of road and marking 2.5mm thick centre line, stop lines, dashes, arrows etc and the like n.exc 10cm wide on roads pavement with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed.

SANDEEP JHANJI CONSTRUCTIONS