PROVN OF PARKING SHED WITH HARDSTANDING AT ALONG MIL STN

Amount

M&L surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in soft/loose soil.complete all as specified and directed.

M&L hardcore of gauge not exceeding 63mm with broken stone or boulders, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M & L 100mm thick PCC 1:4:8 Type D-2 ( using 40mm graded stone aggregate) as in sub base complete all as specified and directed.

M&L for 100mm thick PCC type B-1, 1:2:4 (20mm graded stone aggregate) as in hard standing,and finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L forming 12mm thick expansion joints filled with pre-formed bitumineous filler and top 30mm primed and sealed with sealing compound Grade 'A' complete all as specified

Excavation in post holes (or similar holes) each not exceeding 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surfaces in soft/loose soil complete all as specified & as directed.

M & L PCC 1:3:6 Type C-2 ( using 40mm graded stone aggregate) including pilasters,buttresses columns,pillars,boundary pillars and posts bases complete all as specified and directed.

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 22.5cm and n exc 30cm long of 16 to 20mm dia of shank complete all as specified & as directed.

S&F mild steel plates ( plain or chequrred) channels, square cut or notched ( ordinary or counter sunk) forming holes, with riveted, bolted or welded attachment of Fe-410-W(Gde-E-250) quality-A complete all as specified & as directed.

S&F structural steel work conforming to Fe-410-W(Gde-E-250) quality-'B' rolled mild steel joist, channel, angle or tee sections,as in vertical post fixed fixed independently , without connecting platesetc. ( cut to ordinary lengths i.e within 20mm of the length indicated) complete all as specified & as directed.

S&F mild steel Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.conforming to Fe-290 (Gde-E-165) complete all as specified & as directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of approved colour as directed having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L preparation of new or previously untreated surface of steel and iron work of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of red oxide zinc crome primer complete all as specified & as directed.

Excavation in trenches, not exceeding 1.5 m wide and not exceeding1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

Returning, filling including spreading, levelling, watering and well ramming in layers not exceeding 25 cm.complete all as specified and directed.

Removal of excavated soil not exceeding. 50m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

M&L for sand cushioning to underground cable in trenches with clean dry sand for protection of underground cable complete all as specified and directed.

Supply and laying of XLPE Insulated, screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 1100 Volts grade of size 10 Sqmm x 4 core complete all as specified and directed .

Supply, install, commission and testing LT panel board of suitable size,outdoor type, manufactured by a CPRI approved factory, , weather proof, front operated door with necessary locking arrangement made of 16 SWG CRCA sheet including grouting and PCC 1:2:4 Type B-1 as per required at site complete all as specified and directed with the following accessories :- (a) MCB TPN 63 Amps, 4 pole,16 KA,415 Volts -01 Nos (b) 4 strip 45 cm long Copper bus bar of rating 100 Amps -01 Set (c) MCB SPN 32Amps, 230 Volts -04 Nos

S&F 45W LED street light fittings new generation energy saving and environment friendly long life versatile pressure die cast aluminium luminaire IP 66 protection and impact resistance IK 07 with highpower LEDs as light source inclusive of all accessories including necessary electrical connection complete all as specified and as directed.

S&F bracket for street light fitting made out of 40 mm dia light grade mild steel galvanised tube bent to required shape 1.2mts long including necessary GI clamps, nuts, bolts and washers fixed to pole complete all as specified & as directed.

S&F Factory made board distribution in sheet steel enclosure phosphotised power painted double door with 200 Amps rated bus bar, SPN, 4 ways, 240 Volts suitable for housing MCBs.complete all as specified and as directed.

S&F MCB, SPN, 240 Volts, 40 Amps 10 KA 'C' series complete all as specified and as directed .

S&F MCB, SP, 240 Volts, 6-32 Amps 10 KA complete all as specified and as directed .

M&L PVC insulated FRLS copper conductor 3 core multistrand cable of size 1 Sqmm fixing from fitting to junction box complete all as specified and directed.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armouredwith galvanised steel wire or tape and overall PVC sheathed 10 Sq mm,2 core Stranded conductor nominal cross section in service connections complete all as specified and directed.

Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick buried directly in ground vertically to a depth not less than 2.25mtr deep below ground level with top edge of the earth plate not less than 1.5mtr deep below normal ground level, connected with & including galvanised iron wire 4 mm dia up to DB/main switch as earthing lead by means of nuts, bolts and washers of galvanised iron protected by 15mm dia light grade GI tubing, funnel, wire mesh, 20mm bore GI tubing medium grade watering pipe , including concrete pit in PCC (1:3:6) type C-1, precast RCC (1:2:4) type B-1 cover slab of size 350x350x50mm reinforced with 8mm dia TMT bars @ 15cm c/c in both ways and 10mm dia MS handle of suitable size, charcoal and salt in alternate layers, necessary excavation and earth work in soft/loose soil all as shown in Electric plate No. 3 of SSR part-I and testing complete all as specified and directed

PATKAI ENTERPRISE (BID ID -3425723)

M/s GANDHESWAR PHUKAN (BID ID -3426851)

M/S BISWAJIT SINGH (BID ID -3427003)