Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.9 LAccepted-AOC BIRWAN BRIDGE UDHAMPUR J K 182104 | UDHAMPUR | UDHAMPUR | JAMMU AND KASHMIR | 182104 | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹42.4 L+₹2.6 L (6.47%)Rejected-Finance NEW JAIL ROAD UDHAMPUR 182101 J K | UDHAMPUR | JAMMU AND KASHMIR | 182101 | L2 | Rejected-Finance Not being lowest | |
| 3 | L3₹45.0 L+₹5.1 L (12.9%)Rejected-Finance 129 PANCH SHEEL VENUE DEEP NAGAR JALANDHAR CANTT PB | JALANDHAR | PUNJAB | 144001 | L3 | Rejected-Finance Not being lowest |
Tender Value
₹47.5 L
EMD Value
₹95,000
Closing Date
19 Feb 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Col Sachin Sharma CWE
Military Engineer Services, Commander Works Engineer, Udhampur, PO - Garhi, Udhampur-182121
REPAIR/RESURFACING OF ROADS AND ALLIED SERVICES IN THE AOR OF GE(SOUTH) UDHAMPUR
2024_MES_638152_1
CWE/U(S)-94/2023-24
Open Tender
Civil Works - Roads
Item Rate
180 days
Udhampur
As per NIT
6 documents required · 6 mandatory
₹500
GE(SOUTH) UDHAMPUR
₹95,000
16 Apr 2024
18 Jan 2024
26 Feb 2024
18 Jan 2024
19 Feb 2024
2 Feb 2024
Amount
Scarifying or picking up graveled, macadam or bituminous macadam surfaces in area not exceeding 400 Square Metre, depth exceeding 50mm and not exceeding 100mm deep including removing the material to a distance not exceeding 50 metre and stacking complete, all as specified and as directed.
150 mm thick (compacted thickness) Wet Mix Macadam (WMM) grading as per table 400-13 of MoRTH specifications for Road and Bridge works 2013 manufactured in WMM plant material comprising of clean, crushed, graded aggregate and granular material premixed with water to a dense mass, spreading with sensor paver and rolling with vibratory roller of capacity 80-100KN static weight and consolidating to required gradient and camber complete all as specified and directed. The finished surface tolerances to be as per Table 900-1 of MoRTH specifications for Road and Bridge works 2013.
Repair to pot holes any depth, not exc 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal), complete, all as specified and as directed.
Continuous brick edging, with width equal to the width of the brick, laid dry on end vertically with burnt clay bricks of sub class 'B' bricks including necessary earthwork, complete all as specified and directed.
Preparation of WMM surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc., and applying evenly a priming / tack coat on un-surfaced water bound macadam surfaces with paving bitumen primer using bitumen VG-10 paving grade ( 80 -100 penetration) @ 10 Kg per Ten Square Metre with tar boiler and including Bituminous premix asphaltic semi dense concrete 30mm consolidated thickness with 5.5% paving bitumen using bitumen VG-30 paving grade ( 50 -70 penetration) binder content by weight of total mix rolled and compacted to required camber and gradient, complete, all as specified and as directed.
Preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surfaces with compressed air to remove all loose dirt etc., and applying evenly a priming / tack coat on existing black top surfaces with paving bitumen primer using paving bitumen VG-10 grade @ 5 Kg per Ten Square Metre and including Bituminous premix asphaltic semi dense concrete 30mm (consolidated thickness with 5.5% paving bitumen using bitumen VG-30 paving grade ( 50 -70 penetration) binder content by weight of total mix rolled and compacted to required camber and gradient, complete, all as specified and as directed.
Premix bituminous macadam with 4% paving using bitumen VG-30 paving grade ( 50-70 penetration) bitumen binder, laid/rolled and compacted to required gradient and camber (consolidated thickness upto maximum 75mm), complete, all as specified and as directed. Note: Repair to pot holes any depth not exc 1 sqm each depression in patch over 50mm, shall also be carried out under this item.
Note for item No. 1 to 7 : (a) Preparation of mix in hot mix plant, spreading by self propelling mechanical paver and rolling and compaction by set of rollers as specified in particular specifications shall be carried out. Hot mix plant may be installed at any distance but the contractor shall be responsible for maintaining the required temperature of mix under all conditions till it is laid and compacted. Unit rate against these items shall include for carrying out the works with deployment of these machinery for which nothing extra shall be payable and no delay in completion of work shall be acceptable on this account. (b) To achieve marshal stability of 1050 KN and all as per SSR Part-I Clause No. 20.B.4. (c) If qty of binder contents is less than the qty as specified in respective items of BOQ, it shall be adjusted at supply only rates of paving bitumen @ Rs 60.00 Per Kg and if qty of binder contents is more than the qty as specified in respective items of BOQ no adjustment shall be made.
Preparation of butuminous surfaces road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc and the like n. exc 10 cm wide on road/pavements with hot applied thermoplastic road marking paint of approved colour conforming to BS 3262-1989 with special applicator machineall as per manufacturer's instruction, complete all as specified and directed. Note : Contractor shall have to furnish the detail that quantity minimum used per square meter is 5.00 Kg/Sqm. Make: ASIAN (PRIMER APCOGRIP AND RETRO REFLECTIVE THERMOPLASTIC ROAD MARKING MATERIAL APCO MARK) or equivalent in performance of makes specified in particular specifications.
Preparation of any type of road surfaces by scratching old spots, paints, trading oils greasy spots etc. and applying Thermo Plastic road marking paints as side, side lines of white/yellow colour of width upto 150mm conforming to Ministry of surface Transaport (MORTH) specification for the road and bridge work : 5th revision, over primer as per manufacturers instructions including glass beads (intermix) type I (most/BS6008A) and provision contained in IRC-35-1997, complete all as specified and directed by GE/Engr-in-Charge. Note : Contractor shall have to furnish the detail that quantity minimum used per square meter is 5.00 Kg/Sqm.
Applying two coat synthetic enamel paint on plastered/ concrete / kerb stones and similar articles as required at site incl including preparation of surfaces, complete all as specified and directed.
Cat eye of size 100 mm x 100mmx18.5mm made of ABS material two reflectors fitted in the body, weight of cat eye 130 gm approx, designed for dynamic loads, fixed in repairs, complete all as specified and as directed by Engr-in-Charge. Make : Cat part No DA-978(B) of make Dark eye or equivalent in performance of make Greenlite/Yash/Gunnebo/makes specified in PS.
Solar cat eye aluminium alloy shall ( 100% water proofing design according to 65 ) of size 125mm x 125mm x 25mm ( shank 65mm ) of high efficiency Mono rystafie solar panel 2.4V / 0.3 watt one NI -ed rechargeable battery ( 1.2V / 1600MA ) consisting of super bright LED with 10,000 to 18,000 mcd complete as per manufactures instructions etc. all as specified and directed with stem self illuminating in dim areas during night time . Solar rechargeable batteries for continual performance without much maintenance . Super bright LEDs with a viewing distance of 500 meters . Equipped with prismatic reflective lens on each side ensure maximum reflectivity make up of highly compressive material cosustain over 10 tones water resistant.
Metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed by the Engineer-in-Charge.
Speed breaker of size 750 x 250mm & height 75mm (yellow / black colour) made of ABS material with two highly reflective reflectors molded in PMMA material are welded with ABS plates through Ultrasonic welding process, and the speed breaker shall be installed by the process as per standard manufacturer's instructions including taking out old speed breakers, complete all as specified and as directed by Engr-in-Charge. Make : Dark Eye Cat part No - DA 1006 or equivalent as specified in Particular Specification.
Demolition of cement concrete (unreinforced) in ground floor and in paving of any description and in any position not otherwise specifically provided for, complete all as specified and as directed.
75 mm thick, Plain cement concrete 1:5:10 type E-2 (using 40 mm graded crushed stone aggregates) as in sub base for laying floor finishes including finishing the surfaces even and rough , complete all as specified and as directed.
75 mm thick, Plain cement concrete 1:4:8 type E-2 (using 40 mm graded crushed stone aggregates) as in sub base for laying floor finishes including finishing the surfaces even and rough , complete all as specified and as directed.
Sand cushioning under floors including watering and consolidation complete all as specified and as directed.
Machine pressed rubber moulded / vibro mechenically floated pre cast coloured interlocking cement paver block ISI marked, any shape and size conforming to IS 15658-2006 of 80mm thickness, M-35 Grade, with topping of cement with imported pigment and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed by the Engineer-in-Charge.
Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-40 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed by the Engineer-in-Charge.
Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed by the Engineer-in-Charge.
100 mm thick, Plain cement concrete 1:5:10 type E-2 (using 40 mm graded crushed stone aggregates) as in sub base for laying floor finishes including finishing the surfaces even and rough , complete all as specified and as directed.
Chequered cement concrete tiles 30cm x 30cm x 20-25mm thick, (lacquar quoted) set, jointed and pointed in neat cement slurry in floors/ path with using pigments, over and including 20mm thick screed bedding layer in cement mortar in 1:4, complete all as specified and directed. (Make:ULTRA/ MODERN/ RUCHI /ISI Marked).
Surface dressing not exceeding 15 cm deep a and getting out in any type of soil in road side berms including all necessary cutting/ filling and finish to require level complete, all as specified and as directed.
Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering, complete all as specified and directed by Engineer-in-Charge.
Providing precast cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) in quoin blocks (for use with masonry/ kerbs), string courses, copings. kneelers, apex stones, pier aps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), with plain fair aces, including chamfers, weatherings, throating etc. and setting in cement mortar 1:4, complete with joints to match, complete all as specified and as directed.
Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point, complete all as specified and as directed by Engr-in-Charge.
SINGH CONST CO
s s construction
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .