REPAIR TO TOILET BATH KITCHEN FLOOR WALL TILING SANITARY FITTINGS INCLUDING SUNKEN PORTION AND JOINERY TO OTM ACCN UNDER AGE B R II PATIALA

Amount

Schedule 'A'Part -I (B/R SCHEDULE)

Total amount of Sch 'A' Part I (B/R SCHEDULE)

Schedule 'A' Part-II (Misc Schedule) Note : This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col. 5 siginifies this fact only.

M&L for complete removal of existing treatment of any type/description such as distempering work, internal emulsion etc from internal surfaces of walls with mechanical means/grinder and applying 02 coats of interior emulsion paint (light shade) @ 10 sq.m/litre/2 coats by using roller/brush to wall surfaces over a coat of wall care putty and applying a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion complete all as specified and directed complete all as specified and directed.

M&L for complete removal of existing treatment of any type/description such as distempering work, internal emulsion etc from internal surfaces of ceiling with mechanical means/grinder and applying 02 coats of interior emulsion paint (light shade) @ 10 sq.m/litre/2 coats by using roller/brush to wall surfaces over a coat of wall care putty and applying a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion complete all as specified and directed complete all as specified and directed.

M&L for Complete removal of existing treatment of any type/description such as cement base paint, external emulsion etc from external surfaces of walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc with mechanical means/grinder and applying 02 coats of exterior emulsion paint (light shade) @ 5 sq.m/litre/2 coats by using roller/brush to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over a coat of wall care putty including a coat of exterior wall primer @ 11 sq.m/litre/1 coat as recommended for under coat by manufacturer of exterior emulsion complete all as specified and directed.

S&F Poly coated GI frame work as in grid for False ceiling comprising of protected GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having to equal flanges of 15mm each and web of 45 mm suspended from soffit and approx 900mm centre to centre with GI cleat and steel expansion fasterners with and including ceiling section (not exc 1.2 metre length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips acorss the intermediate channel at 457mm centre to centre and hangers 6mm dia GI (upto 1200 mm length adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x3mm size 60mm long complete with and including 7mm thick PVC laminated gypsum tiles of size 595x595mm of approved design of make Acoster/Ploca/ Armstrong or equivalent as approved by GE all as specified & directed.

(a) S&F false ceiling of 12.5mm th gypsum board over and including concealed grid system complete fixed in all respect and all as per manufacturer's instructions in one/two/three levels and making recess for light fittings as per pattern/design approved by AO and including applying interior emulsion paint (light shade) @10 sqm/ltr/2coats by using roller/brush to gypsum board surface over a coat of wall care putty and applying a coat of interior wall primer @ 10 sqm/ltr/1coat and including supply and fixing of items all as specified as below :-

(b) S&F Suspended Plain Ceiling includes Perimeter Channel {Material-GI(IS513),YS-260Mpa, Finish- Galvanised 150GSM(IS27 )} is fixed along the perimeter of existing wall/ partition with the help of HILTI HPS - 1 (6x40) impact anchor, at 600mm centres. (c) S&F Ceiling Angle {Material-GI(IS513),YS-260Mpa,Finish-Galvanised 150GSM(IS277)} is suspended by fixing it to the Gyproc® soffit cleat {GI(IS513)YS-260Mpa,Finish-Galvanised 150GSM(IS277) }. Soffit Cleat and Gyproc® Rawl Plug- Ø8x45mm {Material-IS 513 CR2 grade, Zinc coating (7 to 8 microns) pull out load- 6.8kN for M30 concrete grade} creating 1220mm x 1220mm grid. (d) S&F Intermediate channel {Material-GI(IS513),YS-260Mpa,Finish-Galvanised 150GSM(IS277) } is fixed to the Ceiling Angle with M6 x 12mm Hex Bolt & Hex Nut arrangement {Material–As per EN 10083 Finish – Zinc Plating} or with 2 Nos of Ø4.2x13 Gyproc® metal to metal screw {Material-Carbon steel EN-ISO 7049/50 Finish- Zinc Coating Thickness- 4.14micron.} (e) S&F Ceiling Section {Material-GI(IS513),YS-260Mpa,Finish-Galvanised 150GSM(IS277)} is then fixed to the Intermediate Channel {Material-GI(IS513),YS-260Mpa,Finish-Galvanised 150GSM(IS277)} with the help of Gyproc® Connecting Clip {Material-High carbon spring steel wire(BS970Gr.En42)-46-48HRC,Finish- Zinc plating 4-6 micron} and in direction perpendicular to the Intermediate channel at 457mm c/c. (f) S&F Single layer of 12.5mm tapered edge Plain (conforming to IS 2095-Part 1:2011, ISI Certified board) is then screw fixed to ceiling section with 25mm drywall screws {Material-Carbon steel EN-ISO 7049/50,Finish-Case hardened Grey Phosphating} at 230mm centres on ceiling section & 150mm at periphery of ceiling. (g) Finally square and tapered edges of the boards are to be jointed and finished so as to have a flush look which includes filling and finishing with Pro-Fill Jointing compound (Conforms to ASTM C475), Gyproc® Joint Paper tape. Note : The complete item shall be got executed through the authorised applicator of manufacturer only all as specified and directed.

S&F PVC Wall panelling of section sizes 150x10 mm (colour/pattern as approved by Accepting Officer) complete fixed in position in all respect including supply and fixing of all accessories like fasteners/screws/solvent etc all as recommended by manufacturer complete all as specified and directed.

Powder coated 50 microns extruded aluminium frame for fixed type partition made out of powder coated aluminium section of size 101.60 x 44.45 x 1.93mm, comprising of 12mm thick High Density Fibre Board pre-laminated on both sides (water proof) inserted in and including necesary jointing cleats, rubber packing/EPDM gasket, anodised aluminium snap beading complete fixed to floor and wall by means of cadium plated steel screws complete all as specified and directed.

S&F Powder coated 50 microns extruded aluminium glazing/ doors & shutters made out of section 63.5x38.10x1.29mm min thickness for chowkats or frame & shutters made of size 44.45x44.45x1.29mm min thickness for side rails and middle rail, 114.3X44.45X1.29mm min thickness for top rails and bottom rails complete all as specified and directed.

S&F aluminium casement windows (with provision for cooler) with 50 micron powder coating doubled panelled and double shutters consisting of frame and mullion of 101.60X44.45X1.29 mm min thickness and shutters made of 63.5X31.75X1.29mm min thickness complete all as specified and directed.

S&F Powder coated 50 microns extruded aluminium in 3 Tier Track Sliding Windows/glazing, with frame of section 100x44-45x1.30mm min thickness, track of size 100x38.10x1.30 & shutters made of size 32x18x1.3mm min thickness, with built in locking system for each leaf complete all as specified and directed.

Providing and fixing factory made extruded aluminium ventilators with 50 micron powder coating of frame of 63.5 X 38.10 X 1.29 mm min thickness complete all as specified and directed.

S&F 12mm thick high density fibre board pre-laminated on both sides (water proof) below & above middle/lock rail in powder coated aluminium doors and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc aluminium beads 20 mm size with and complete all as specified and directed.

S&F 5mm thick glass for aluminium windows including EPDM gasket to render the glazing, air and water tight etc and power coated aluminium beeds 20 mm size complete all as specified and directed.

S&F stainless steel wire gauge 0.36 mm nominal dia of wire and average width of aperture 1.40mm to be fixed in Powder coated aluminium windows/ ventilators etc complete all as specified and directed.

S&F stainless steel (304 grade) finished butt hinges 125mm complete all as specified and directed.

S&F powder coated aluiminium tower bolt 200mm long complete all as specified and directed.

S&F powder coated aluiminium tower bolt 150mm long complete all as specified and directed.

S&F powder coated aluminium handles 150mm complete all as specified and directed.

S&F powder coated aluminium hook and eye of suitabel length adjustable to aluminium window shutters complete all as specified and directed.

S&F 5mm thick frosted glass fixed to aluminium ventilator including necessary EPDm gasket to render the galzing, air and water tight etc and powder coated aluminium beeds 20mm sized complete all as specified and directed.

Factory made aluminium 50 micron powder coated grill, opening size 101.6 X 63.5 mm (4"X2½") and of approx weight @ 1.345 Kg/sq.m complete fixed in position in windows in all respect complete all as specified and directed.

Factory made ISI marked flush door shutters 35mm thick, BWP conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters complete all as specified and including supply and fixing following items : (a) Mild steel Butt Hinges 125mm - 4 Nos per leaf (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 Nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos per leaf (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16 x 300mm - 1 No per leaf (e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 No per leaf

35mm thick glazed and skelton shutters of 2nd class hard wood (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR-91 Pt-1 section 8 clause 8.20(a), kiln seasoned and chemically pressure treated all as specified including stainless steel 304 Grade wire cloth (0.36mm nominal dia of wire and average width of aperture 1.40mm) and the supply and fixing following items: (a)Mild steel Butt Hinges 125mm - 4 Nos per leaf (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 Nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos per leaf (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x300mm - 1 No per leaf

M&L for single charge, Ceramic, stain & scratch resistant, joint free, premium quality coloured tiles 600 X 600 mm and 8-10 mm thick, as in floors/skirting etc. in any pattern of light & dark tiles as approved, set and jointed adhesive of Sika (Ceram Grey) @ 5 Kg/sq.m and pointed in white or coloured cement to match, in floors etc. over & including 20 mm thick screed in cement mortar (1:4) over and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.

M&L for ceramic glossy finish, joint free premium quality coloured tiles 600 X 300 mm and 8-9 mm thick, in any pattern of light & dark/highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed. Note : Dado should be flushed with the wall plastering.

M&L for anti-skid ceramic joint free premium quality coloured tiles 300 X 300 mm and 6-7 mm thick, as in floors etc. in any pattern of light & dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc. over & including 20 mm thick screed in cement mortar (1:4) over and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.

M&L for anti-skid premium quality coloured tiles 400 X 400 mm and 7-8 mm thick, as in floors etc. in any pattern of light & dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc. over & including 20 mm thick screed in cement mortar (1:4) over and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.

S&F Steel window box type using ERW hollow 'P' section comprising double frame for and including gauged and glazed Skelton shutter 30mm thick, jointed internally with flat iron 25x3mm complete including hinges, handle, tower bolts, stops, lugs etc. all as shown on drawing No. TD-191(R) sheet 1/4 to 4/4 complete all as specified and directed.

S&F Sink Cock with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed one ends for 15mm bore of iron pipe or for union and fixed in position complete all as specified and directed.

S&F vitreous china premium/1st quality wash basin (under counter), white, size 580x430 mm including S&F all accessories as recommended by manufacturer complete fixed in position in all respect as per manufacturer's instructions complete all as specified and directed.

M&L for baroda green marble machine cut as in shelves/steps/counter tops, 18-20 mm thick, set and jointed in cement slurry over & including screed of 15 mm thick rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and mirror type polishing and bull nose on exposed sides complete all as specified and directed.

S&F overhead shower 70mm dia with 235mm long shower arm and incl all necessary accessories as recommended by manufacturer for fixing and taking down existing of any description/size complete all as specified and directed.

S&F vitreous china premium/1st quality Orissa Pan water closet white colour of size 580X440mm including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe and including and taking down existing of any description/size complete all as specified and directed.

S&F Brass chromium plated spray jet with flexible pipe 1.50 m long with bass nut/union fixed to EWC suitable for 15 mm bore of pipe fixed in repairs complete all as specified and directed.

S&F Bib taps, CP long nose, fancy type long with wall flange screwed for 15mm bore of iron pipe or for brass ferrule and fixed in position complete all as specified and directed.

S&F Angular Stop Cock with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed one ends for 15mm bore of iron pipe or for union and fixed in position complete all as specified and directed.

S&F CP trap gratings size 100mm dia with complete all as specified and directed.

S&F in repairs stainless steel soap dish approx size 100x80mm fixed to walls of approved make complete all as specified and directed.

S&F 6mm thick looking mirror with smooth finish edges/sides fixed to wall with stainless steel brackets/plugs/connecter/spacers/ screws etc. chrome finish complete fixed in position all as specified and directed.

S&F in repairs glass shelf of length not less than 550mm long with stainless steel railing fixed to walls all as specified and directed.

S&F towel rack of stainless steel 60 cm long between flanges with hangers and including all accessories like brackets/screws etc as recommended by manufacturer and complete fixed in position complete all as specified and directed.

Supply and fixing in repairs MS powder coated peg set of Six complete all as specified and directed.

S&F stainless steel curtain rod 25mm bore min thickness 1mm incl stainless steel brackets/supports/end stops etc complete fixed in position complete all as specified and directed.

S&F 18 mm thick with min density 600 Kg/cu.m LEAD FREE PVC Celuka ply of both side plain white colour fixed with screws, solvent cement/ adhesive to make kitchen/bed rooms cabinet sides top and bottom and shelves inside the cabinets complete as per manufacturer’s specifications complete all as specified and directed.

S&F 18 mm thick with min density 600 Kg/cu.m LEAD FREE PVC Celuka ply of single side rigid laminate of approved colour and other side plain white colour fixed with ss screws and solvent cement/ adhesive to make kitchen cabinet, cupboard shutters and shelves complete as per manufacturer’s instructions complete all as specified and directed.

S&F 12 mm thick LEAD FREE PVC Celuka ply min density 600 Kg/cum fixed with ss screws and solvent cement/ adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete as per manufacturer’s specifications complete all as specified and directed.

S&F 5 mm thick with min density 600Kg/cum LEAD FREE PVC Celuka ply of single side rigid laminate of approved colour and other side plain white colour and pasted with solvent cement/ adhesive on frame work of cup boards complete as per manufacturer’s specifications complete all as specified and directed.

S&F 6 mm thick with min density 600 Kg/cu.m LEAD FREE PVC ply fixed with ss screws and solvent cement/ adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete as per manufacturer’s specifications complete all as specified and directed.

S&F auto closing hinges 35 mm of 0 crank( KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete in all respect and fixed in position complete all as specified and directed.

S&F Ball bearing runners 45 mm Telescopic (KTS-20) full extension load capacity 50 kgs, complete all as specified and directed.

S&F tower bolts 150mm long of stainless steel 304 finished/of outer plate metal matt finished complete all as specified and directed.

S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 150mm long matt finished complete all as specified and directed.

S&F Piano/continuous hinge of size 19 mm stainless steel complete all as specified and directed.

S&F ball catchers 304 grade stainless steel finished suitable for cabinets premium quality complete fixed in position as per manufacturer's instructions complete all as specified and directed.

S&F Stainless Steel 304 grade wire Basket (avg. wait 2.5 to 4 Kg. per basket) of pull out type like plain/cup&saucer/bottle/multi purpose/2-3 shelf baskets etc. for kitchens of required suze complete all as specified and directed.

S&F Stainless Steel 304 grade Basket Cutlery of size 370X485mm premium quality complete fixed in position all as specified and directed.

S&F wardrobe tube/hanging rod for CB of size 30X15mm and 0.6mm thick stainless Steel 304 grade rectangular high gloss finish complete fixed in position incl S&F brackets/screws etc. all as per manufacturer's instructions all as specified and directed.

S&F stainless steel finished locks (double action) with 2 nos of keys min outer body size 75mm suitable for wardrobes/CB etc. complete all as specified and directed.

Supply only Bright /matt finished Stainless Steel handles of size 150mm oval type, heavy weight of approved quality & make with necessary screws etc all complete all as directed and specified.

Supply only Stainless steel sliding bolt with stainless steel nuts and screws etc. for door shutters of size 250mm plate type, bolt not less than 12mm dia, with and including a minimum of 6 bolts and nuts, four on bolt plate, heavy weight ISI marked of approved quality & make complete fixed as in repair all as specified and directed.

S&F 100mm size PVC butt hinges complete all as specified and directed.

S&F 150mm size PVC handles complete all as specified and directed.

S&F 200mm long PVC tower bolt complete all as specified and directed.

M&L for machine cut kota stone slab as in flooring of size 580 x 580 mm each & 18-20 mm thick, set and jointed in cement slurry including border of 100mm wide baroda green/white mable as per pattern approved over & including screed of 20mm in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and mirror type granite polishing complete all as specified and directed. Note : 1. All the edges of slabs shall be grinded/cutted at the right angle before laying, so that paper thin, smooth jointing to be obtained. 2. The colour of the slabs shall be uniform.

M&L for machine cut kota stone slab as in skirting of 18-20 mm thick, set and jointed in cement slurry over & including screed of 10 mm thick rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and mirror type polishing complete all as specified and directed.

Applying membrane on primed surface by press application method with minimum 75 mm longitudinal wise lap and 100 mm over lap on the transverse direction duly sticked using 3 mm thick APP (Atactic Polyproplene Polymer) modified prefabricated five layer, weight not less than 3.6 kg/Sqm water proofing membrane, black finished non woven polyester reinforced (wt not less than 150 grams) over applying one coat of bituminous primer @ 0.4 kg per Sqm complete all as specified and directed.

S&F vitreous china premium/1st quality wash basin half pedestal, white/ivory/off white, flat back, size 550x400 mm including pedestal, screws & plug and brackets etc. all accessories as recommended by manufacturer with inlet and outlet screwed for pipe or connections incl all necessary accessories for fixing, packing, union and incl 32mm brass CP waste coupling and complete in all respect as per manufacturer's instructions and taking down existing of any description/size all as specified and directed.

S&F Pillar tap cast copper alloy, CP, with capsten head 15mm bore, screwed down high pressure, long screw shanks and fly nuts, screw for iron pipe fixed in repair complete all as specified and directed.

S&F vitreous china premium/1st quality wash down water closet pan floor mounting (pedestal pattern/EWC) S/P trap white/ivory including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe CP 32mm dia and incl. plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and including supply and fix of PVC long arm S/P trap so that joint is avoided inside the building as well as in wall and outlet straight away come out of wall in all floors G.F.and taking down existing of any description/size complete all as specified and directed.

S/F vitreous China bowl urinal flat back of size 465 x 355 x 265 mm white with grating & union for discrage pipe excluding flushing cistern, flush pipe & waste pipe complete all as specified and directed.

S&F flushing cistern of PVC 10 ltr. cap. with dual flushing system, valveless syphonic action type, , low level, white/ivory/off white with inlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and taking down existing of any description/size complete in all respect all as specified.

S&F stainless steel sink with drainage board, AISI 304 quality grade, 1.00 mm thick, glossy finish, for kitchen with plugs washers and CP waste coupling of 32mm dia and including cantilever cast iron brackets, connecting union, etc, overall size 915mm x460/928mmx458mm with bowl size 410x 355x185mm/430x355x200 including bottle trap 32mm with 125mm & 175mm long with wall connection pipe & wall flange and making good disturbed portion in CM 1:3 or PCC 1:2:4 complete all as specified and directed.

S&F doubled layered rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top / cover) 500 Ltrs capacity hoisted and fixed in position all as specified including ball brass valves, high pressure, with polythene float and fly nut complete screwed for 20mm bore iron pipe and including GI nipple/union of 20mm bore to connect GI tubing to PVC tank complete all as specified and directed.

S&F doubled layered rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top / cover) 1000 Ltrs capacity hoisted and fixed in position all as specified including ball brass valves, high pressure, with polythene float and fly nut complete screwed for 20mm bore iron pipe and including GI nipple/union of 20mm bore to connect GI tubing to PVC tank complete all as specified and directed.

Arneja Builders

M/s Anil Kumar and co.

DELTA CONSTRUCTION CO

AR CONSTRUCTIONS

K B Enterprises

M/s Rakesh Singla