Balance work of Construction of Lift well for 50 Bedded Sub-District Hospital at R.S PURA

Amount

Engagement of Labour for demolishing of wooden partition of 6mm thick ply alongwith wooden framme including stacking of serviceable material and disposal of unserviceable material within 50m lead.

Carpenter

Labour

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead : In cement mortar

Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m. (stacks of cleaned bricks shall be measured) : From brick work in cement mortar

Engagement of Labour for removal of unhygenic material/building rubbish from lift well including disposal/dumping outside building within 50m lead.

Brickwork with common burnt clay F.P.S (non modualar) bricks of class designation 75 in superstructure in 1cement : 6 fine sand mortar.

Extra for brick work in superstructure above plinth level upto floor V level. (By manual means)

Extra for brick work in Square or rectangular pillars.

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15 degree, landing balconies, upto floor five level excluding cost of centring, shuttering, finishing and reinforcement. 1 cement: 1.5 coarse sand : 3 graded stone aggregates 20mm nominal size.

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.

15mm Cement plaster on the rough side of single or half brick wall of mix 1 : 4 ( 1 cement : 4 fine sand)

Extra for plastering of the height more than 10m from ground level for every additional height of 3m or part thereof

Cetring and shuttering including strutting, propping etc and removal of the form work for Lintels, beams .

Providing and lying in position cement concrete of specified grade excluding the cost of centring and shuttering- all works upto plinth level. (crushed Stone 40 mm nominal size) 1 cement 4 coarse sand: 8 graded, stone aggregates 40mm size crushed Stone.

Cement concrete flooring 1:2:4 ( 1 cement: 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement. 50 mm thick with 20mm nominal size crushed stone aggregate.

Providing and laying 16mm thick Granite of any colour and shape (Area of slab over 0.5 sqm) gang saw cut mirror polished (pre moulded and pre polished), machine cut of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish etc. complete at all levels.

Extra for providing edge moulding to 18 mm thick Granite stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.

Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade, New work (two or more coats) over and inluding primer coat of cement primmer.

Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, having brand logo em,possed on the body/plate with double spring mechanism and door weight upto 125 kg for doors including cost of cutting floors, embedding in-charge.With Stainless Steel cover plate minimum 1.25 mm thickness. floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot" and single piece M.S. sheet outer box with slide plate etc. complet~ as per the direction of Engineer-in-Charge

Strctural steel work welded in built up sections, in framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing 1 mm thick M.S. steel door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using flats 30x6mm for diagonal braces and central cross piece.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber I neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item.) With float glass panes of 5.50 mm thickness (weight not less than 13 . 50 kg I sqm).

Disposal of unhygenic material/building rubbish by MT outside municipal limits including loading,unloading Complete

Carriage of material Mechanical Transport including loading/un loading and stacking at site complete.

Stone Aggregate below 40mm size upto site of work.

Sand upto site of work.

Bricks upto site of work.

Measurable quantities may vary at the time of actual execution of the work and shall be allowed as per actual with in the cost.

M/s Satish Ganjoo

Sumit Anand