Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.3 LAccepted-AOC NEAR MES FILTER PLANT SANGOOR UDHAMPUR J K 182101 | UDHAMPUR | UDHAMPUR | J K | 182101 | L1 | Accepted-AOC OK | |
| 2 | L2₹28.1 L+₹1.1 L (4.26%)Rejected-Finance | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹28.7 L+₹1.7 L (6.40%)Rejected-Finance | L3 | Rejected-Finance Other than L1 |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
7 Jan 2020, 6:00 pmClosed
GE UTILITIES
GE UTILITIES UDHAMPUR PO GARHI PIN 182121 UDHAMPUR
Repair/Replacement and Maint of Boiler Incinerator and DG Set for OT MRI Center and associated EM works under GE Utilities Udhampur
2019_MES_297131_2
GE/U-44/2019-20
Open Tender
Civil Works
Item Rate
270 days
UDHAMPUR
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Yes
GE UTILITIES UDHAMPUR
₹60,000
Yes
29 Feb 2020
16 Dec 2019
8 Jan 2020
16 Dec 2019
7 Jan 2020
21 Dec 2019
Amount
S&F in repalacement fuel filter primary and secondary Cat Part No. AX1005944 of existing make & specifications suitable for DG Set (make Kirloskar or any other existing make) of capacity 250 KVA to 320 KVA complete all as specified and directed by Engr-in-Charge.
S&F in repalacement lub oil filter body.Cat Part No..AX1005707 of existing make & specifications suitable for DG Set (make Kirloskar or any other existing make) of capacity 250 KVA to 320 KVA complete all as specified and directed by Engr-in-Charge.
S&F in repalacement V belt AX43,AX49, AX42,AX51, Cat part N.04.249.01.0.00, 04.249.02.0.00,04.250.01.0.00 of existing make & specifications suitable for DG Set (make Kirloskar or any other existing make) of capacity 250 KVA to 320 KVA complete all as specified and directed by Engr-in-Charge.
S&F in repalacement Fly wheel and starter ring assembly 144 teeth Cat part No.4H.068.10.0.00 of existing make & specifications suitable for DG Set (make Kirloskar or any other existing make) of capacity 250 KVA to 320 KVA complete all as specified and directed by Engr-in-Charge.
S&F in repalacement battery terminal of batteries of capacity upto 12 Volt 180 AH of existing make & specifications suitable for DG Set (make Kirloskar or any other existing make) of capacity 250 KVA to 320 KVA complete all as specified and directed by Engr-in-Charge.
S&F in repalacement Lub oil pipe Cat Part No.02.078.05.0.00 of existing make & specifications suitable for DG Set (make Kirloskar or any other existing make) of capacity 250 KVA to 320 KVA complete all as specified and directed by Engr-in-Charge.
S&F in replacement tappet valve Cat part No.181027 of existing make & specifications suitable for DG Set (make Kirloskar or any other existing make) of capacity 250 KVA to 320 KVA complete all as specified and directed by Engr-in-Charge.
S&F in repalacement Fuel Pipe for filter (7.5,14x14B,700PB) of existing make & specifications suitable for DG Set (make Kirloskar or any other existing make) of capacity 250 KVA to 320 KVA complete all as specified and directed by Engr-in-Charge.
S&F in repalacement Fuel Pipe return (FIP TO TANK) of existing make & specification for BIO Diesel Cat Part No.02.102.13.0.00 of existing make & specifications suitable for DG Set (make Kirloskar or any other existing make) of capacity 250 KVA to 320 KVA complete all as specified and directed by Engr-in-Charge.
S&F in repalacement Air cleaner element Cat Part No 3237963 of make Greaves or equivalent DG Set for capacity 10KVA to 320KVA complete all as specified and directed by Engr-in-Charge.
S&F in repalacement Residential Slienicer Cat Part No 02.538.10.0.00 of existing make & specifications suitable for DG Set (make Kirloskar or any other existing make) of capacity 250 KVA to 320 KVA complete all as specified and directed by Engr-in-Charge.
S&F in repalacement injector assembly of Cat Part No 6H.155.10.0.00 of existing make & specifications suitable for DG Set (make Kirloskar or any other existing make) of capacity 250 KVA to 320 KVA complete all as specified and directed by Engr-in-Charge.
S&F in repalacement Hose (H.Exchanger to W.Pump) Cat Part No.6H.1145.03.0.00 of existing make & specifications suitable for DG Set (make Kirloskar or any other existing make) of capacity 250 KVA to 320 KVA complete all as specified and directed by Engr-in-Charge.
S&F in repalacement Turbo charger for HA 494TC Stage III Cat Part No.04.750.01.0.00 of existing make & specifications suitable for DG Set (make Kirloskar or any other existing make) of capacity 250 KVA to 320 KVA complete all as specified and directed by Engr-in-Charge.
S&F in repalacement Engine start push button Green colour 'NO' contact( vasihno make,cat no.2xvaf,flush type) of Cat Part No.03.918.17.0.00 of existing make & specifications suitable for DG Set (make Kirloskar or any other existing make) of capacity 250 KVA to 320 KVA complete all as specified and directed by Engr-in-Charge.
Taking out burnt armature, winding wire and rewinding of armature of DG Set capacity 250 KVA to 320 KVA with super enamelled copper winding wire of existing specification, design, weight complete all as specified and directed by Engr-in-Charge. Make: Atlas/Devi Dayal.
Taking out burnt field coil and rewinding of field coil with super enamelled copper winding wire of existing specification design, weight and gauge for 250KVA to 320KVA capacity DG sets complete all as specified and directed by Engr-in-Charge. Make: Atlas/Devi Dayal.
M&L for insulation of armature with Class ‘B’ insulation and Varnishing of armature winding and drying up to desired temperature for 250 KVA to 320 KVA capacity DG Sets complete all as specified and directed by Engr-in-Charge.
M&L for insulation of field coils with Class ‘B’ insulation and varnishing of field coils and drying up to desired temperature for Alternator of DG Sets of capacity 250 KVA to 320 KVA complete all as specified and directed by Engr-in-Charge.
S&F in replacement burnt rectifier +ve Cat Part No.0358-0069 complete all as specified and directed by Engr-in-Charge. Make: Greaves/Kirloskar
S&F in replacement burnt rectifier -ve Cat Part No.0358-0070 complete all as specified and directed by Engr-in-Charge. Make: Greaves/Kirloskar
Reassembling of rotor and stator after rewinding and re-fixing of Alternator with Engine by assembling flexible coupling with alternator mounting with nuts, bolts including making cable connection complete including testing and commissioning at ON load for under mentioned DG sets of capacity 250 KVA to 320 KVA DG Sets complete all as specified and directed by Engr-in-Charge.
Dismantling of radiator and repair by welding/soldering of radiator and re-fixing the same after cleaning of radiator with soda and acid including replacement of radiator foundation nuts, bolts complete all as specified and directed by Engr-in-Charge.
Draining out used Engine oil of DG Set and cleaning sump complete and re-filling of engine oil 15 W 40 in sealed drum (Note- Oil 15W40 shall be measured and paid separetely as supply only).
M&L for dismantling /opening of alternator of DG Set by disconnection of cable connections and flexible coupling, nuts/bolts and alternator foundation nut, bolts including taken plate form strip opening of alternator and checking out burnt out parts for DG Sets of capacity 250KVA to 320 KVA complete all as specified and directed by Engr-in-Charge.
S&F in repalacement Engine stop push button Red colour 'NO' contact( vasihno make,cat no.2xvaf,flush type) of Cat Part No.03.918.18.0.00 of existing make & specifications suitable for DG Set (make Kirloskar or any other existing make) of capacity 250 KVA to 320 KVA complete all as specified and directed by Engr-in-Charge.
S&F in repalacement Header for L.O cooler & filter Cat Part No.3H.192.01.0.00 of existing make & specifications suitable for DG Set (make Kirloskar or any other existing make) of capacity 250 KVA to 320 KVA complete all as specified and directed by Engr-in-Charge.
S&F in repalacement Breather Pipe for 160 & 250 KVACat Part No.F6.138.01.0.00 of existing make & specifications suitable for DG Set (make Kirloskar or any other existing make) of capacity 250 KVA to 320 KVA complete all as specified and directed by Engr-in-Charge.
S&F in repalacement Alternator starter 12 Volt.Cat Part No.06.034.02.0.00 of existing make & specifications suitable for DG Set (make Kirloskar (Lucas) or any other existing make) of capacity 250 KVA to 320 KVA complete all as specified and directed by Engr-in-Charge.
S&F in repalacement Alternator starter 24volt. Cat Part No.06.034.06.0.00 of existing make & specifications suitable for DG Set (make Kirloskar (Lucas) or any other existing make) of capacity 250 KVA to 320 KVA complete all as specified and directed by Engr-in-Charge.
S&F in repalacement Governer Assembly. Cat Part No. CCI.099.017.0.00 of existing make & specifications suitable for DG Set (make Kirloskar (Lucas) or any other existing make) of capacity 250 KVA to 320 KVA complete all as specified and directed by Engr-in-Charge.
S&F in repalacement stop solenoid assly energis to run 12v two coil Cat Part No.0307-2546 of existing make & specifications suitable for DG Set (make Crompton Greaves or any other existing make) of capacity 250 KVA to 320 KVA complete all as specified and directed by Engr-in-Charge.
S&F in repalacement start solenoid assly energis to run 12v two coil Cat Part No.0307-1617 of existing make & specifications suitable for DG Set (make Crompton Greaves or any other existing make) of capacity 250 KVA to 320 KVA complete all as specified and directed by Engr-in-Charge.
S&F in repalacement of battery cable Assembly (For -ve & +ve) uniiywin 4 (21sq.mm cable) 1000 mm length Cat Part No.02.950.10.0.00 complete all as specified and directed by Engr-in-Charge.
S&F in repalacement battery cable lead (copper) negative with terminal size 35 sq mm (198 cm long).(as per sample).
Supply and filling coolent for radiators. K Cool super Plus -50-50 premix.Cat part No.82.020.35.1.25. 25ltrs Packing for DG Set (make Super Plus or any other existing make) of capacity 250 KVA to 320 KVA complete all as specified and directed by Engr-in-Charge.
S&F in repalacement of AVR variable speed DC DG.Cat Part No.02.731.13.0.00 of existing make & specifications suitable for DG Set (make Kirloskar or any other existing make) of capacity 250 KVA to 320 KVA complete all as specified and directed by Engr-in-Charge.
S&F in repalacement Flexible pipe of M30 X 1.5 union both side (1400mm long) of existing make & specifications suitable for DG Set (make Kirloskar or any other existing make) of capacity 250 KVA to 320 KVA complete all as specified and directed by Engr-in-Charge.
Overhauling of Fuel injector pump, taking out from DG set carefully, transportation of the same to civil work-shop for repair & complete service of FIP pump and calibration on automatic setting machine, shifting of FIP pump from civil work-shop to worksite and re-fixing the same to DG set of capacity 250 KVA to 320 KVA and testing complete all as specified and directed by Engr-in-Charge.
Overhauling of Fuel injector pump,taking out from DG set carefully, transportation of the same to civil work-shop for repair & complete service of FIP pump and calibration on automatic setting machine, shifting of FIP pump from civil work-shop to worksite and re-fixing the same to DG set of capacity 160 KVA and testing complete all as specified and directed by Engr-in-Charge.
S&F in repalacement slipring assembly of 15 KVA DG set.Cat Part No.06.805.32.0.00 of existing make & specifications suitable for DG Set (make Kirloskar or any other existing make suitable as per site requirement) of capacity 250 KVA to 320 KVA complete all as specified and directed by Engr-in-Charge.
S&F in repalacement slipring assembly of 160 KVA to 320KVA DG set.Cat Part No.06.805.24.0.00 of existing make & specifications suitable for DG Set (make Kirloskar or any other existing make suitable as per site requirement) of capacity 250 KVA to 320 KVA complete all as specified and directed by Engr-in-Charge.
S&F in repalacement Bushing -Coupling DG set.Cat Part No.0512-0320 of existing make & specifications suitable for DG Set (make Crompton Greaves or any other existing make suitable as per site requirement) of capacity 250 KVA to 320 KVA complete all as specified and directed by Engr-in-Charge.
S&F in repalacement Carbon brushes of 15 KVA to 320KVA DG set.Cat Part No.06.805.21.0.00 of existing make & specifications suitable for DG Set (make Crompton Greaves or any other existing make suitable as per site requirement) of capacity 250 KVA to 320 KVA complete all as specified and directed by Engr-in-Charge.
Supply only of engine oil 15 W 40 in sealed drum complete all as specified and directed by Engr-in-Charge. Make: Castrol Super /valvolinre or equivalent (Packing 208 liters)
S&F in replacement of S96 Voltmeter 0-500V AC .AE/RISH.Cat Part No.02.856.31.0.00 of existing make & specifications suitable for DG Set (make Crompton Greaves or any other existing make suitable as per site requirement) of capacity 250 KVA to 320 KVA complete all as specified and directed by Engr-in-Charge.
S&F in replacement of S96 Ammeter 30/5A(CTR) .AE/RISH.Cat Part No.02.856.32.0.00 of existing make & specifications suitable for DG Set (make Crompton Greaves or any other existing make suitable as per site requirement) of capacity 250 KVA to 320 KVA complete all as specified and directed by Engr-in-Charge.
Rubbing the uneven as well as open surface of DG set ranging from 250 KVA to 320 KVA with Emery paper, cleaning the grease and oil substances over the area. Applying two coats of synthetic enamel paint of existing colour code complete all as specified and directed by Engr-in-Charge.
S&F in replacement of current transformer of ratio 100/5 Amps (set of three) of existing make & specifications suitable for DG Set complete all as specified and directed by Engr-in-Charge.
S&F in replacement of copper tube (Thimbles) terminal heavy duty of size 185 Sq.mm of existing make & specifications suitable for DG Set complete all as specified and directed by Engr-in-Charge.
S&F in replacement of copper tube (Thimbles) terminal heavy duty of size 150 Sqmm of existing make & specifications suitable for DG Set complete all as specified and directed by Engr-in-Charge.
S&F in replacement of copper tube (Thimbles) terminal heavy duty of size 120 Sq.mm of existing make & specifications suitable for DG Set complete all as specified and directed by Engr-in-Charge.
S&F replacement indicator lamp (LED type) fitting with neon lamp in three colour (Red/Green/Yellow) of existing make & specifications suitable for DG Set complete all as specified and directed by Engr-in-Charge.
S&F in replacement Battery 12 volt 180 AH Code :- FXPO-MHD 1800 of existing make & specifications (make Exide or any other existing make suitable as per site requirement) complete all as specified and directed by Engr-in-Charge.
S&F in replacement Battery 12 volt 65/75 AH Code :- EP.15-12(12M15) of existing make & specifications (make Exide or any other existing make suitable as per site requirement) complete all as specified and directed by Engr-in-Charge.
M&L for repair Battery charger with 2 volt battery 12Nos complete all as specified and directed by Engr-in-Charge.
S&F in replacement contactor CM 300 suitable capacity of DG Set 250 KVA of existing make & specifications suitable for DG Set (make Crompton Greaves or any other existing make suitable as per site requirement) of capacity 250 KVA to 320 KVA complete all as specified and directed by Engr-in-Charge.
S&F in repalacement of AVR variable speed DC DG of existing make & specifications suitable for DG Set (make Crompton Greaves or any other existing make suitable as per site requirement) of capacity 250 KVA to 320 KVA complete all as specified and directed by Engr-in-Charge.
Supply, laying in trenches or fixed to wall etc cable PVC insulated mult stranded copper conductor single core cable of size 120 sqmm cut to size all as required for connection from DG Set panel to change over and AMF panel including thimble , flexible conduit pipe complete all as specified and directed by Engr-in-Charge.
Supply and Laying , jointing and testing of XLPE insulated, armoured heavy duty electric cable with aluminium conductor 1100 volts grade of size 240 sqmm 3.5 core laid in trenches, ducts, pipes complete all as specified and directed by Engr-in-Charge.
Description all as per serial item No 62 here-in-before but of size of cable 150 sqmm 3.5 core
Description all as per serial item No 62 here-in-before but of size of cable 500 sqmm 3.5 core
Description all as per serial item No 62 here-in-before but of size of cable 95 sqmm 3.5 core
Description all as per serial item No 62 here-in-before but of size of cable 630 sqmm 3.5 core
M&L for cutting of existing road for crossing of underground electric cable for laying of any size GI tubing including necessary excavation and earth work including repairing the same as per existing with pre mix bituminous carpet complete all as specified and directed by Engr-in-Charge. Width of trench shall be 15C cm & depth shall be upto 30 cm.
S&F HRC fuse link tested for 80 KA at 415 Volt as per IS : 13703 of 630 Amp Cap complete all as specified and directed by Engr-in-Charge. Make: HPL/Havelles/Indoasian
S&F main switch with sheet steel enclosure 32 amps TPN, 415 volts with HRC/ re-wireable fuses complete all as specified and directed by Engr-in-Charge. Make: HPL/Havelles/Indoasian
S&F main switch with sheet steel enclosure 630 amps TPN, 415 volts with HRC/ re-wireable fuses complete all as specified and directed by Engr-in-Charge. Make: HPL/Havelles/C&S
S&F main switch with sheet steel enclosure 400 amps TPN, 415 volts with HRC/ re-wireable fuses complete all as specified and directed by Engr-in-Charge. Make: HPL/Havelles/C&S
S&F main switch with sheet steel enclosure 800 amps 4 pole, 415 volts with HRC/ re-wireable fuses complete all as specified and directed by Engr-in-Charge. Make: HPL/Havelles/C&S
S&F change over switch FP 320 Amps, side handle, 415 Volt, 4 pole complete all as specified and directed by Engr-in-Charge. Make: L&T/Legrand/Schenider/Siemens
S&F change over switch FP 400 Amps, side handle, 415 Volt, 4 pole complete all as specified and directed by Engr-in-Charge. Make: L&T/Legrand/Schenider/Siemens
S&F change over switch FP 800 Amps,side handle, 415 Volt, 4 pole complete all as specified and directed by Engr-in-Charge. Make: L&T/Legrand/Schenider/Siemens
S&F change over switch FP 630 Amps, side handle, 415 Volt, 4 pole complete all as specified and directed by Engr-in-Charge. Make: L&T/Legrand/Schenider/Siemens
Routine Preventive comprehensive maintenance of washing machine 100 Kg capacity-02 Nos steam heated, front loading for washing hospital linen/Garments etc. With drive motor 5HP and extractor 10 HP complete all as specified and directed by Engr-in-Charge. Make: Crompton Greaves all as specified and directed by Engineer-in-Charge Make: Super shine Model SFL/100 S.
Routine Preventive comprehensive maintenance of washing machine 50 Kg capacity-03 Nos steam heated, front loading for washing hospital linen/Garments etc. With drive motor 3HP and extractor 5 HP Make: Crompton Greaves all as specified and directed by Engineer-in-Charge Make: Super shine Model SFL/50 S.
Routine Preventive comprehensive maintenance of sluicing machine 25 Kgs capacity-02 Nos. Front-loading type open pocket heavy-duty normal spin steam auto reverse etc. all as specified and directed by Engineer-in-Charge Make: Super shine.
Routine Preventive comprehensive maintenance of hydro extractor top loading type direct drive self-balancing with automatic DC injection brake automatic timed filled with safety 25 Kg. Dry weight-02 Nos and 50 KG Dry weight-02 Nos all as specified and directed by Engineer-in-Charge. Make: Super shine.
Routine Preventive comprehensive maintenance of drying tumble 25 KG-02 Nos and 50 Kg-02 Nos steam heated front loading type open pocket automatic timed auto reverse auto digital temperature control dry all as specified and directed by Engineer-in-Charge. Make: Super shine.
Routine Preventive comprehensive maintenance flat work ironer (calendaring Machine) chest type steam heated with single and double roller automatic chest lowering/ raising, moisture suction fail safe finger guard, variable frequency inverted drive of size 830 mm x 300 mm roller length Make: “ Super shine “ model H-3407- 2 Nos with drive motor 5HP/3HP and 5 HP/7.5HP 1420/950 RPM complete all as specified and directed by Engr-in-Charge. Make: Crompton Greaves
Routine Preventive comprehensive maintenance of steam flat bed press model SBF/30/5 Make: Super shine Sri Nos 3/2JNDA 233&312 NDA 2436, 2373, 2331 RPM 2820 automatic timer and automatic temperature control steam, heated pneumatic raising and lowering powerful moisture suction of size 750 mm x 1500, Qty-04 Nos all as specified and directed by Engineer-in-Charge.
Routine Preventive comprehensive maintenance of reciprocating air cooled compressor model AED20 and vacuum pump of capacity 5 HP 3 phase double stage model No 4741/KL/4883 with air tank and connection from main board to machine and loop earthing to supply compressed air to three flat work ironer and five bed press, auto calving/mattress sterilizer complete all as specified and directed by Engr-in-Charge. Make: KG Khosla
Routine Preventive comprehensive maintenance of auto clave machine IS 3829 having large chamber to accommodate 30 Kgs of solid weight at time manually operated size 400 mm dia x 610 mm length Make: “M-SHAH“, Qty-02 Nos all as specified and directed by Engineer-in-Charge.
Routine Preventive comprehensive maintenance of mattress sterilizer complete with vacuum Make: Lakshmee Shree Capacity 5 HP 3 phase and driven end pump type RV-2 of size 1200 mm x 2100 mm fabricated from SS-304 stainless steel 6mm thick chamber reinforced with carbon steel and jacket temperature 134 degree C and 121 degree C respectively. Sterilization chamber provided with sliding door 01 Nos with auto opening & closing door plate. Make: “ M-SHAH “ Sri. Nos 1684 (Spares shall be measured and paid separately). Note for ser Item No 77 to 86: Spares shall be measured and paid seprrately under relevent items as Supply only & fixing charges shall deemed to be included in the unit rate quoted for these items.
Supply only V belt B-62. Make: Fenner/Powerfix/Dunlop
Supply only V belt B-70. Make: Fenner/Powerfix/Dunlop
Supply only V belt B-80. Make: Fenner/Powerfix/Dunlop
Supply only V belt B-86. Make: Fenner/Powerfix/Dunlop
Supply only V belt B-92. Make: Fenner/Powerfix/Dunlop
Supply only belt B-100. Make: Fenner/Powerfix/Dunlop
Supply only belt B-118. Make: Fenner/Powerfix/Dunlop
Supply only belt A-56. Make: Fenner/Powerfix/Dunlop
Supply only Main contactor 3 phase 32 Amp Make: L&T/BCH/SIEMENS
Supply only Auxiliary contactor 3 phase 32 Amp Make: L&T/BCH/SIEMENS
Supply only contactor 3 pole Type ML-1 , 415 / 230 volt 50 HZ AC 16 Amp Make: L&T/BCH/SIEMENS
Supply only contactor 3 pole Type ML-1.5 , 415 / 230 volt 50 HZ AC 16 Amp Make: L&T/BCH/SIEMENS
Supply only push button “ON" OFF of existing make & specifications Cat No. SFL-100-076 and SFL-100 complete all as specified and directed by Engr-in-Charge.
Supply only indication lamp. Make: Kissan/National
Supply only limit switch 10 Amps, 415 volts. Make: Vaishno/L&T
Supply only steam globe valve 15 mm ISI Mark. Make: Vaishno/L&T or equivalent as approved by GE.
Supply only steam globe valve 20 mm ISI Mark. Make: Vaishno/L&T or equivalent as approved by GE.
Supply only steam valve 25 mm ISI Mark. Make: Vaishno/L&T or equivalent as approved by GE.
Supply only over load relay range 6 to 9 Amps /2.5 to 4 Amps Make: L&T/BCH/SIEMENS.
Supply only drain solenoid coil. Make: L&T/BCH/SIEMENS
Supply only Steam solenoid Coil Make: Flocon or equivalent as approved by GE.
Supply only ball bearing UCF-P 207 with housing. Make: NTN or Equivalent as approved by GE.
Supply only ball bearing UCF-P 209 with housing. Make: NTN or Equivalent as approved by GE.
Supply only ball bearing UCF-P 213 with housing. Make: NTN or Equivalent as approved by GE.
Supply only ball bearing UCF-P 215 with housing. Make: NTN or Equivalent as approved by GE.
Supply only balance spring small suitable for flat Bed press. Model F/B/P-30/5 Cat Part No SPF-30-058
Supply only balance spring large suitable for flat Bed press. Model F/B/P-30/5
Supply only brake TDR (timer) suitable for Hydro Extractors/50 Kg. Make: Vaishno/L&T or equivalent as approved by GE.
Supply only cotton cloth padding with blanket for hand press table of size1.5 mtr x 1 mtr.
Supply only Chain of existing make & specifications Cat No FW-1-1-060/FW 1-2-060 complete all as specified and directed by Engr-in-Charge.
Supply only emergency stop switch of existing make & specifications Cat No FW-1-1-048/FW 1-2-048 complete all as specified and directed by Engr-in-Charge.
Supply only lubrication oil SA40 Cat No. SAE - 40
Supply only steam valve 3 way of existing make & specifications Cat No SFP-30-052 complete all as specified and directed by Engr-in-Charge.
Supply only cotton padding with steel wool & Blanket suitable for flat Bed press modle F/B/P-30/5 cat No. SPF-30-054.
Supply only hand press heavy duty single phase 230 volt capacity 1.250 KW Auto cut out.
Supply only cotton cloth padding with steel wool and blanket suitable for flat work lroner single & double Rollers.
Rewinding of electric motors of capacity 1 HP/2 HP/3 HP/5HP/7.5 HP/10 HP with super enamelled copper winding wire as per existing size, turns and appropriate gauge including all insulating material i.e Varnish, Cotton tape , insulating paper and soldering etc complete all as specified and directed by Engr-in-Charge.
Supply only Air flexible pipe (PVC) of size 15 mm dia of existing make & specifications for Flat work ironer (single/double rollers).
Supply only steam flexible pipe (PVC) of size 20 mm dia of existing make & specifications for flat work ironer (single/double Rollers).
Supply only Air flexible pipe of existing make & specifications for flat bed press
Supply only steam flexible pipe of existing make & specifications for flat bed press
Supply only M S Drain Assembly of existing make & specifications suitable for 100Kg/50 Kg / 25 Kg Washing machine (as per Sample)
Supply only Reversing Time Switch of existing make & specifications for Washing machine & Drying Tumbler (As per Sample) Make: Mukund or equivalent as approved by GE.
Supply only Alluminium casting Blower Fan of existing make & specifications for Drying Tumbler for 50 Kg & 25 Kg Washing manchine (As per sample) complete all as specified and directed by Engr-in-Charge.
S&F MS Drain pipe 4" dia 1.2 Mtr long with 4" MS Bend - 2 Nos & 2 flange sets & 6mm thick stainless steel drain pipe of size 75mmx75mm made to shape/design as per sample for and upto 100 Kg washing Machine complete all as specified and directed by Engr-in-Charge.
S&F in replacment of electric driven motor 3 phase 1420/950 RPM, 2 HP of existing make & specifications and as per existing fittings complete all as specified and directed by Engr-in-charge. Make: Crompton /Kirloskar/Jyoti/Phillips
S&F in replacment of electric driven motor 3 phase 1420/950 RPM, 3 HP of existing make & specifications and as per existing fittings complete all as specified and directed by Engr-in-charge. Make: Crompton /Kirloskar/Jyoti/Phillips
S&F in replacment of electric driven motor 3 phase 800 RPM, 10 HP of existing make & specifications and as per existing fittings complete all as specified and directed by Engr-in-charge. Make: Crompton /Kirloskar/Jyoti/Phillips
Taking down old rusted iron sheet supply and fixing new iron sheet having thickness 1.25mm , cut to size and make to shape and fixing by welding and painting with two coats of synthetic enamel paint over one coat of red oxide to match with existing shade complete all as specified and directed by Engr-in-Charge.
M&L water circulating reciprocating Make: triplex Water pump power sprayes with relief valve (2160 Litres /Hr @ 950 RPM @28 BAR including motor frame pully and V belt complete all as specified and directed by Engr-in-charge.
M&L complete replacement of fuel pumps AJ-6 of existing make & specifications Cat Part No-8220125200 complete all as specified and directed by Engr-in-charge.
Description all as per serial item No 138 but Photo cell 8205 Cat Part No 8603111400 complete all as specified and directed by Engr-in-Charge.
M&L for Nozzle 6.5 GPH 45 degree of existing make & specifications Cat Part no 8904131100
Description all as per ser item No 140 but Pressure gauge 0 to 50 KG.
M&L for safety valve 25 mm of existing make & specifications Cat Part No 9722122400
Description all as per ser item No 141 here-in-before but Electrode Assembly of existing make & specifications Cat Part No 0314613200
M&L for Hose Rubber of existing make & specifications Cat Part No 9647002600 Make: Dunlop or equivalent as approved by GE.
S&F Burner rod assembly of existing make & specifications Cat Part No 0314824110 Make: GEM/SEICD/ELITE/Marc.
S&F Connecting rod Assembly Cat Part No- 06110127300
S&F Optimizer Cat Part No– 9312165630
S&F Ball Valve 20mm BSPT Cat Part No 9770101900 Make: Prayag/BIR
S&F Stop Valve, Bronze, 25mm dia Cat Part No 9711102500. Make: Parko/Elite/Marc/SEICO
S&F Stop Valve, Bronze, 20mm dia Cat Part No 9711101900. Make: Parko/Elite/Marc/SEICO
S&F Non return valve 15mm dia Cat Part No 9713101200. Make: BIR/JAARC/Kirloskar.
Taking down Old / existing pipeline and M&L for new MS pipeline of 50mm bore covered with glass wool insulation and aluminium sheet 24 gauge thick packing / cover for glass wool fixed on wall with MS clamps / Side wall complete all as specified and directed by Engr-in-charge.
Description all as per serial Item No 151 but MS pipe of size 20 mm bore.
Taking down Old / existing pipeline and M&L for MS pipe line of 15 mm dia for boiler , heavy duty including all fittings such as elbow ,union ,tee etc complete all as specified and directed by Engr-in-charge.
Taking down Old / existing pipeline and M&L for MS pipe line of 20 mm dia for boiler , heavy duty including all fittings such as elbow ,union ,tee etc complete all as specified and directed by Engr-in-charge.
Taking down Old / existing pipeline and M&L for MS pipe line of 25 mm dia for boiler , heavy duty including all fittings such as elbow ,union ,tee etc complete all as specified and directed by Engr-in-charge.
M&L for complete replacement of boiler steam coil of existing make & specifications suitable for pressure steam boilers cap 600 Kg per Hr. Make Thermax model RXA-06 complete all as specified and directed by Engr-in-Charge.
Descaling solution (HCL) in 20/50 liters packing complete all as specified and directed by Engr-in-Charge.
M&L in replacement of steam stream radiator with stainless steel tube and aluminum pulley suitable for dryer tumbler 50 kg and 25 kg (as per sample) complete all as specified and directed by Engr-in-Charge.
M&L in repair MS sheet 2mm thick for replacing casing of boiler steam coil cut to size and made to shape as per site requirement including cutting, welding etc for Boiler No 1, 2 & 3 complete all as specified and directed by Engr-in-Charge.
M&L for replacement of defective filtters & resin of existing water softenning plant including all parts welding and allied work complete all as specified and directed by Engr-in-Charge.
M&L for replacement of defective Primary Burner of cap 10 to 20 ltrs/hour,220 volt 50 Hz of existing make & specifications for Incinerator of cap 40/50 Kg/hour complete all as specified and directed by Engr-in-Charge. Make: Eco Flam.
M&L for replacement of defective parts of water tank for filtration of Incinerator exhaust pipe/chimney waste material complete all as specified and directed by Engr-in-Charge.
M&L for replacement of defective Fire Proof Bricks for Incinerator burning Chamber complete all as specified and directed by Engr-in-Charge.
M&L for replacement of defective Electric three phase connection to Hydro Extractor with suitable size of cable, TPN 63 Amps and springs of existing make & specifications complete all as specified and directed by Engr-in-Charge.
S&F galvanized steel strip 25X4mm dia for continuous earth strip with fixing arrangement complete all as specified and directed by Engr-in-Charge.
Taking out old unserviceble earthing and material & labour earthing complete with galvanised steel earth plate electrode 60 cm x 60cmx6mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 meters below normal ground level. connecting to the Galvanised iron earth strip 25X4mm size by means of bolls, nuts, check nuts and washers of galvanised iron and earth strip protected by provision of GI medium grade pipe 40mm bore including provision of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone agregates with 40mm thick cover of RCC (1:2:4) reinforeed with XPM weight not less than 4 Kg/Sqm) and frame of angle iron 25x25x6mm with lugs 02 Nos and handle of 6mm dia MS bar made to shape,
GI light grade 20mm bore pipe for watering , perforated at bottom. 1.75 metre long placed on top edge of earth plate. charcoal and common salt filling 15 cm thick alternative layers with fixing arraangement, funnel wire mesh and earth work in soft soil returing filling in and removal of surplus soil to a distance not exceeding 50 meters all as per electical plate 3 of SSR-2009 Part-I and connecting to earth test point all as specified or indicated including testing on completion. Note: On testing after completion of earthing, if desired earth resistance is not obtained, the earthing will be re-done by the contractor at his own risk & cost to the entire satisfaction of Engineer-in-charge.
M&L for replacement of defective reciprocating air cooled compressor electric motor cap 5 HP 3 phase duel stage model No 4741/KL/4883 complete all as specified and directed by Engr-in-Charge. Make: Kirlosker or equivalent in crompton/ Siemens
Supply only engine oil complete all as specified and directed by Engr-in-Charge.
PAUL TRADERS
ARNABH ASSOCIATES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .