PROVN OF EXIT GATE ALONGWITH RAIN WATER SHED AT OLD GUARD ROOM (P-47) AT INS UTKROSH AND SPL REPAIRS TO LT DISTRIBUTION SYSTEM AT AJAY BAUGH AREA UNDER AGE E/M I AT GE MINNIEBAY, PORT BLAIR

Amount

Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation etc, and getting out in hard/dense Soil add additional depth beyond the first 1.5 m as specified

Excavation in hard and dense soil not exceeding 1.5 mtr wide and n exc 1.5 mtr depth and getting out incl forming of bottom for laying cable all as specified and directed

Returning filling including spreading, levelling, watering and well ramming in layers n.exc 25cm complete all as specified and as directed

Removing Excavated soils not exceeding 50 M and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and as directed.

Dismantling of PCC any grade complete all as specified and as directed

M&L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and as directed

M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate as in coping, bed plates etc complete all as specified and as directed

M & L for PCC 1:3:5 type C1 using 20 mm graded stone aggregate for poles complete all as specified and as directed.

M&L for PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in coping/collar of poles including necessary form work complete all as specified

M&L for RCC M30 (design mix) in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc, basement slabs, under reamed piles and mass concrete complete all as specified.

M&L for form work to sides of rough finished concrete foundations, foootings, bases of columns, raft and raft beams, sides and soffits if any of foundation and plinth beams and similar work vertical or to batter compelte all as specified and as directed

M&L for RCC M30 (design mix) in columns,pillars, piers, posts and struts etc complete all as specified and as directed

M&L for form work to sides of Pillars, posts, struts, piers,columns and sanctions complete all as specified and as directed

M&L for TMT bars 10mm dia and over as in reinforcement cut to length, bent to shape required including cranking hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing clips complete all as specified and as directed

All as per item No 14.00 abov but 6mm to 8mm dia in stirrups complete all as specified and as directed

M&L for precast cement concrete block masonry with PCC solid blocks in 1:3:6 type C1 using 20mm graded stone aggregates, exc. 10cm in width and set in CM 1:4 complete all as specified and directed.

M&L for external rendering 5mm thick in CM 1:4 with water proofing compound (water proofing compound shall be used as per manufacturers instructions) over a coat of 10mm thick in CM 1:6 over brick or concrete surfaces finished even and fair Note : WPC shall be measured and paid separately as supply only.

Supply only water proofing compound ISI marked complete all as specified and as directed

M& L for two coats of whether proof exterior acrylic emulsion paint with anti fungal property over a coat of primer and a coat of external wall putty on newly plastered wall surfaces including preperation of surfaces etc complete all as specified and as directed

M&L for Granite work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and laid in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as specified

S & F MS steel work in tubular /post/trusses/purlin including special shaped washers base and bed plate cleat nut and bolt etc. complete and welded tubes confirming to IS 1161- 1979 graded St 240 complete all as specified and as directed

M&L for framed brackets of angles or tees with web and flanges cut to shape, drilled and counter sunk for screw, including bending and welding angles, as necessary gusset plates, riveting, etc. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 complete all as specified and as directed Note : Brackets over 10 kg each to be measured under 'Structural Steel

M&L for preparation of new steel/iron surfaces of any description exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of redoxide primer complete all as specified and as directed .

S&F in repairs aluminium anodised snap grid false ceiling of standard aluminium section such as wall angle of size 38mm x 25mm x 2.4mm weighing 0.36 Kg/Rm main/cross tees of size 36.5mm x 25mm x 1.4mm weighing 0.24 Kg/Rm, grid size n.exc. 610 x 610mm suspended with 4mm dia GI wire at interval n.exc. 600mm centre to centre for main & cross tees fixed to roof slab roof truss fixed with suitable size MS hook and fastening bolts etc including 'E' board classic 4mm thick oceanic sheet of size n.exc. 610 x 610mm size fixed in ceiling with clips to aluminium snap grid incl preparation of new surface and applying two coats of oil bound distemper over a coat of primer all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws etc complete all as specified and as directed

S& F Galvanised 2 stranded, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed Note : each line wire to be measured

S&F GI concentrina barbed tape wire fencing of dia exc 450mm but n.exc 600mm of coil to be provided on the top of wall not less than 6(six) rounds per meter including clips as per manufacture's instructions complete all as specified and as directed.

S & F Aluminium flat iron work in, wind ties screwed as directed, including all necessary drilling, bolting or riveting etc and similar work complete all as specified and as directed

S&F Framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes framed guard bars barred iron doors ladders framed balusters walk ways; railings framework of water tanks and similar work conforming to Fe.290.Gde-E-165 all as specified

M&L for disconnecting the electric supply from power house and taking up the LT XLPE insulated armoured insulated 1100 Volt grade cable shifting up to a distance 20 meter and relaying the same of the following sizes complete all as directed.

240 Sqmm 3.5 core

300 Sqmm 3.5 core

M&L for disconnecting the electric supply from power house and taking up HT XLPE insulated armoured insulated 11000 Volt grade shifting up to a distance 20 Metre and relaying the same of the following sizes complete all as directed.

95 Sqmm 3 core

120 Sqmm 3 core

M&L for disconnecting the electric supply from power house and taking up the steel tubular pole up to 11 Meter height and re-erect the pole within the complex of INS Utkrosh within 1 KM distance complete all as directed.

Supply and lay GI tubing medium grade for cable protection of following sizes:-

80 mm dia

50 mm dia

Supply and lay LT UG cable XLPE insulated armoured and PVC sheathed LT 1100 volts grade with aluminium conductor stranded of following sizes :-

240 Sqmm 3.5 core

300 Sqmm 3.5 core

Supply and lay HT UG cable XLPE insulated armoured and PVC sheathed HT 11000 volts grade with aluminium conductor stranded of sizes :-

95 Sqmm 3.5 core

120 Sqmm 3.5 core

Supply, laying DWC (double Wall corrugated) HDPE pipe ISI marked of outer dia of 90 mm and inner dia 76 mm polyethylene including couplers, bends, cap etc., with smooth internal and profiled external surface for non pressure under ground cable complete all as specified.

Supply, laying DWC (double Wall corrugated) HDPE pipe ISI marked of outer dia of 120 mm and inner dia 103.5 mm polyethylene including couplers, bends, cap etc., with smooth internal and profiled external surface for non pressure under ground cable complete all as specified.

Supply and jointing Straight through joint epoxy type for LT cable PVC/XLPE insulated armoured aluminium conductor of sizes from 185 sqmm 3.5 core to 240 Sq mm x 3.5 core,1100 volts grade complete with jointing kit complete all as specified and as directed

Supply and jointing Straight through joint epoxy type for LT cable PVC/XLPE insulated armoured aluminium conductor of size 300 sqmm 3.5 core to 400 sqmm 3.5 core 1100 volts grade complete with jointing kit complete all as specified and as directed

Supply and jointing Straight through joint epoxy type for HT cable PVC/XLPE insulated armoured aluminium conductor of sizes from 95 sqmm 3core to 240 Sq mm x 3core,11000 volts grade complete with jointing kit complete all as specified and as directed

M & L point wiring with 1.5 Sqmm (nominal area) pvc unsheathed multi stranded copper conductor PVC insulated 1100 volt FRLS grade multi stranded cable drawn through and including PVC casing capping/conduit ISI marked minimum 20mm size and its accessories complete along with 1.5 Sqmm cable but in green colour as continuous earthing wire and connecting to common earth dolly completely concealed ,surface,in walls/ceiling/roofs with and including 1.2 mm thick MS sheet terminal boxes duly fabricated flush mounting in the wall for mounting switches,switch socket combinations fan regulators etc., as required with 3 mm thick plastic laminated sheet top cover all as directed and specified for the following.

One light /bell/fan point controlled by one switch complete all as specified and as directed

One three pin switch socket 5 Amps plug point independent board complete all as specified and as directed

One three pin switch socket 5 Amps plug point on same board complete all as specified and as directed

All as per item No 52.00 above but with 2.5 Sqmm single core multi stranded copper conductor for one three pin socket 5 Amps on independent board including continuous earth wire PVC insulated 1.5 Sqmm copper solid conductor to common earth dolly

S&F switch flush type 6 Amp 240 Volts complete all as specified and as directed

S&F switch socket outlet 3 & 2 pin 5 Amps 240 volts flush type complete all as specified and as directed

S&F switch socket outlet 3 & 2 pin 15 Amps 240 volts flush type multi purpose complete all as specified and as directed

S&F ceiling rose surface type Bakelite 65 x 50 mm with three terminals with ISI mark complete all as specified and as directed.

S&F 4 way double door vertical DB, IP - 42 factory made having 200 Amps rated bus bar suitable for MCB TPN, 415 Volts and MCB SPN complete all as specified and as directed Note :DB shall be fixed in wall such that front cover shall be flush with the wall surface

M& L for MCB 4 pole 100 Amps, 240 V, 50 Hz AC supply,10 KA C series complete all as specified and as directed.

M& L for MCB SP 6 to 40 Amps, 240 V, 50 Hz AC supply,10 KA C series complete all as specified and as directed.

S & F LED light fitting 1x33 W, 230V, 2x2 recessed mounted general purpose square shaped luminaries with high transitivity diffuser suitable for office application with profiled & flat diffuser fitted on ceiling connecting up with twin core twisted flexible copper conductor cable with suitable size all as specified directed.

M&L for earthing complete with Galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 mir deep below GL) with top edge of earth plate not less than 1.5 Mtr below normal ground level, earth plate surrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using Galvanized earth strip 32x6 mm size connected by means of bolts, nuts, check nuts and washer of galvanized iron or steel, provision of 15 mm dia GI pipe medium grade for protection of G1 earth wire and 20mm dia GI pipe medium grade for watering arrangement and PCC (1:3:6) , type CI chamber. MS funnel, wire gauge. 50 mm thick RCC 1:2:4, type B1 earth pit cover with 6 Nos. 8 mm dia high strength deformed steel TMT bars on both ways including necessary excavation in any type of soil, returning, filling in, removal of surplus soil to distance n exc 50 mtr, provision of charcoal and salt complete all as shown in electrical plate No 3 of schedule Part-I.Note: (i) Cost of GI earth wire and GI protection pipe upto 7.5mtr length shall be deemed to be included in the rate quoted for this item. (ii) The unit rate shall also includes for Wire mesh, funnel, excavation, returninng & filling, PCC chamber pit, RCC cover & test point.(iii) PCC pit shall be provided at least 500mm away from the earth pit and not just on the earth pit. (iv) All accessories required for galvanised steel plate electrode required, as specified and as directed.

S&F smart bright Flood light fitting LED type, 170W 240 Volts luminous shall be more than 80 lumen/watt, luminar efficiency 100 lm/w , PDC housing with IP 65 flood light optics , efficient housing output LED sleek and robust design for better aesthetics ,highly efficient reliable and sturdy mounted on pole/wall including connection complete with angle iron of suitable size up to 0.60 mtr long fix on wall/pole complete all as specified and as directed

M& L for preparation to internal and external old steel surface of LT Feeder Piller Box/ Panel Boards of various size and completely removal of existing treatment by scraping or chemical and surface painted with DUCO paint with help of spray gun complete all as specified and as directed by Engineer-in-Charge.

M& L for repair of LT Feeder Piller Box/ Panel Boards made out of 2.00 mm thick mild steel sheet fixed to existing frame and painted with help of spray gun over a coat of red oxide primer including taking out to existing warn out shutter frame and fixed with minimum two hinghes to existing frame complete all as specified and directed.

S&F in repairs aluminium tower bolts, 300mm long bright bolt including connected accessories fixed on front and rear side for locking arragements of LT FP boxes complete all as specified and as directed

S&F in repairs doors hinges suitable for LT feeder pillar/Panel box complete including welding complete all as specified and as directed

S&F in replacement MCCB 400 Amps, 4 pole, 415 volt, breaking capacity 35 KA conforming to IS 13647-II complete all as specified and as directed.

S&F in replacement MCCB 250Amps, 4 pole, 415 volt, breaking capacity 25 KA conforming to IS 13647-II complete all as specified and as directed.

S&F in replacement MCCB 200Amps, 4 pole, 415 volt, breaking capacity 25 KA conforming to IS 13647-II complete all as specified and as directed.

S&F in replacement MCCB 160 Amps, 4 pole, 415 volt, breaking capacity 16 KA conforming to IS 13647-II complete all as specified and as directed.

S&F in replacement MCCB 100 Amps, 4 pole, 415 volt, breaking capacity 16 KA conforming to IS 13647-II complete all as specified and as directed.

S&F in replacement MCCB 63 Amps, 4 pole, 415 volt, breaking capacity 16 KA conforming to IS 13647-II complete all as specified and as directed.

Supply and fix in replacement for aluminium cable lugs for fixing of armoured cables in panels complete all as specified and as directed for the following sizes of cables:-

Supply, installation, testing and commissioning LT Feeder pillar box CPRI Tested of Size 800x600X450 mm suitable for 3 phase 415 Volts of suitable size out door made out 3.15mm thick CRCA sheet with angle iron frame of size 50x50x6mm cubical type complete with aluminium bus bar 400Amp and including PCC foundation as per site requairment to accomodated to the following incluing taking down old unsv feeder pillar:- INCOMING (a) MCCB 4 pole 160 Amp 16 KA - 01 No. (b) LED indicating lamp R-Y-B - 03 Nos. OUTGOING (a) Through Bus Bar

Supply, installation, testing and commissioning LT Feeder pillar box CPRI Tested of Size 800x600X450mm suitable for 3 phase 415 Volts of suitable size out door made out 3.15mm thick CRCA sheet with angle iron frame of size 50x50x6mm cubical type complete with aluminium bus bar 400Amp and including PCC foundation as per site requairment to accomodated to the following including taking dwon unsv feedar pillar:- INCOMING (a) MCCB 4 pole 100 Amp 16 KA - 01 No. (b) LED indicating lamp R-Y-B - 03 Nos. OUTGOING (a) Through Bus Bar

Supply, installation, testing and commissioning LT Feeder pillar box CPRI Tested of Size 800x600X450 mm suitable for 3 phase 415 Volts of suitable size out door made out 3.15mm thick CRCA sheet with angle iron frame of size 50x50x6mm cubical type complete with aluminium bus bar 400Amp and including PCC foundation as per site requairment to accomodated to the following including taking down old unsv feeder pillar:- INCOMING (a) MCCB 4 pole 63 Amp 16 KA - 01 No. (b) LED indicating lamp R-Y-B - 03 Nos. OUTGOING (a) Through Bus Bar

Supply, installation, testing and commissioning LT panel board double door of suitable size for 3 phase 415 Volts of suitable size bus bar of rating 400 Amps out door made out of 3.15mm thick CRCA sheet with angle iron frame of size 50X50X 6mm cubical type including 300 mm panel stand made out of angle iron size 40 X40X 6mm of complete including PCC foundation as per site requirment to accomodated to the following including taking down old unsv panel board:- INCOMING (a) MCCB 4 pole 160 Amps 25 KA (b) Digital Ammeter with CT's (0-400) - 01 No (c) Digital Volt meter 0-500 Volt - 01 No (d) LED indicating lamp (R-Y-B) - 03 Nos OUTGOING (a) MCCB 4 pole 100 Amps 16 KA- 02 Nos (b) MCCB 4 pole 63 Amp 16 KA - 01 Nos

Supply, installation, testing and commissioning LT panel board double door of suitable sizefor 3 phase 415 Volts of suitable size bus bar of rating 400 Amps out door made out of 3.15mm thick CRCA sheet with angle iron frame of size 50X50X 6mm cubical type including 300 mm panel stand made out of angle iron size 40 X40X 6mm of complete including PCC foundation as per site requirment to accomodated to the following including taking down unsv panel board :- INCOMING (a) MCCB 4 pole 160 Amps 25 KA (b) Digital Ammeter with CT's (0-400) - 01 No (c) Digital Volt meter 0-500 Volt - 01 No (d) LED indicating lamp (R-Y-B) - 03 Nos OUTGOING (a) MCCB 4 pole 100 Amps 16 KA- 01 No (b) MCCB 4 pole 63 Amps 16 KA- 02 Nos

Supply, installation, testing and commissioning LT panel board double door of of suitable size for 3 phase 415 Volts of suitable size bus bar of rating 400 Amps out door made out of 3.15mm thick CRCA sheet with angle iron frame of size 50X50X 6mm cubical type including 300 mm panel stand made out of angle iron size 40 X40X 6mm of complete including PCC foundation as per site requirment to accomodated to the following:-INCOMING (a) MCCB 4 pole 200 Amps 25 KA -1 No (b) Digital Ammeter with CT's (0-400) - 01 No (c) Digital Volt meter 0-500 Volt - 01 No (d) LED indicating lamp (R-Y-B) - 03 Nos OUTGOING (a) MCCB 4 pole 100 Amps 16 KA - 02 Nos (b) MCCB 4 pole 63 Amps 16 KA - 02 Nos

Reruting Dicipline the serviciable Power Cable on wall /cable duct of size 70 to 185 Sqmm with shaddleing with aluminium Clamp with requard size of screw inside cable duct complete all as specified and as directed by Engineer-in -charge.

M&L in relacement of earth pit indicator for existing earthing pit made out of 16 mm dia and 60 cm long MS Squre Bar embeded in PCC (1:3:6) type C-1 using 20 mm graded stone agreegate in PCC block of size 30 X30 X30 cm including CI/MS plate of size 30X30X 3 mm thick fixed on side of earth pit cover complete painting and writing over the plate ie. Type , Result, Date of measurement and pit number with Black back ground with white complete all as specified and as directed

S&F in repairs PCC earthing pit of outer size 450X450 X300 mm and RCC pit cover of required size including necessary earth work complete all as specified and as directed

Demolition of PCC as in block walling built in cement mortar complete all as specified and as directed

M&L for solid block walling with PCC block (1:3:6) Type C1 (20 mm graded Aggregate) , straight on plan exc 6m mean radius built in CM 1:6. cement mortar complete all as specified and as directed

M&L for rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete surface and even smooth (without using extra cement) complete all as specified and as directed

M&L for hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to stepsincluding embeding in concrete and screwing etc. wind ties for roof including securing bolts complete all as specified and as directed

M&L for broken stone or Boulders filling of Gauge not exc. 63 mm, deposited, spread and levelled in layers not exc. 150mm thick, watered and rammed to a True Surface, complete all as specified and as directed

Dismantling old U/S fancing wire mesh,any type incl all complete.

Supply only chain link fencing 50X50mm Mesh or Cages with 3.15mm dia Mild Steel Galvanised Wire with PVC coated , lapped, Straining and Binding with including Mild Steel Wire (annealed) not less than 0.9mm dia, complete all as specified and as directed

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc.including provission of binding wire complete all as directed

Dismentling / Taking down of gate of steel channels or angle section complete all as specified and as directed

M&L for framed work such as grills,gratings, etc.. with ends of barsshouldered and/or riveted,or forged into spikes; framedguard bars; barred iron doors;ladders; framed balusters; walkways; railings; framework ofwater tanks and similar work conforming to Fe.290.Gde-E-165 any shape complete all as specified and as directed

S&F for preparation of new surfaces and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm complete all as specified and as directed

M&L for preparation of new steel surface of any description over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed

M&L for preparation of old steel surface of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed

M & L for danger notice plate of PVC sheet , printed with letters, figures ( English, Hindhi,Tamil) and conventional skull and bones in signal red colour and fixed with GI. clamps, bolts and nuts of approved size, for LT/HT installations complete all as specified and as directed

S&F in replacement GI earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required for 32 mm x 6mm thick, Galvanised using porcelain clit/post insulators, complete all as specified and as directed

S&F in replacement of aluminium earth continuity conductor or main earthing lead fixed to wall or recess or any other indicated situation for loop earthing etc. as required for 25 mm x 3mm thick, aluminium using porcelain clit/post insulators, complete all as specified and as directed

S&F in replacement aluminium bus bar of existing Size in the existing panel board on site on required shape post insulators, complete all as specified and as directed

S&F in replacement of LED Indicating lamp (R-Y-B) complete all as specified and as directed

bansal construction

M/s Pooja Enterprises

Kathir Marketing Services

Usha Builders

Allied Trading Company

V CHINNA DURAI