PROVN OF CERTAIN TOILETS AND ADDN/ALTN TO EXISTING TOILETS AT VARIOUS LOCATIONS AT AF STN SURATGARH

Amount

BOQ (PROVN OF CERTAIN TOILETS AND ADDN/ALTN TO EXISTING TOILETS AT VARIOUS LOCATIONS AT AF STN SURATGARH)

M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in cm 1 : 6 complete all as specified and as directed by Engr-in-Charge.

All as per item 01 above here in before but as in half brick thick walls in CM 1:4.

M&L for 75mm thick plain cement concrete 1:3:6, type C2, using 40mm graded crushed stone aggregate as in plinth protection, laid in slope of 1:12 and surface finished even and smooth without using extra cement including making joint at 2.5m interval and at each corner the joint shall be filled with bitumen mastic filling to full depth (comprising one part hot blown bitumen 85/25 and two part of sand), complete all as specified and directed.

PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete all as specified.

M&L for 75mm thick Cement concrete type D- 2, 1:4:8 (40mm graded aggregate) in sub base,flooring, pavings etc complete all as specified and as directed.

Taking down chowkats or frames including shutters (without taking off shutters from the frame) not exc. 1.5 Sqm each and removing from site complete all as specified and direcetd.

Taking down chowkats or frames including shutters (without taking off shutters from the frame) exc. 1.5 Sqm but n exc 4.0 sqm each and removing from site complete all as specified and direcetd.

M&L for Pressed steel frames of size 105mmx60mm made of 1.25mm thick Cold Rolled sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, complete all as specified.

M&L for PCC 1:3:6 type C0 (using 12.5mm graded stone aggregate) as in hold fast iron fixing and back filing of pressed steel door frame including necessary form work all as specified.

M&L for figured glass, pin headed type, 3mm thick and glazing with oil putty or wooden beads in squares not exc. 0.5 Sqm in each pane, complete all as specified and directed.

S&F Stainless Steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks, wire staples or beading etc, complete all as specified and directed.

Taking down cement plaster on brick or concrete wall surfaces etc including raking out joints, hacking for key, scrubbing down with water and removing rubbish from the premises etc. complete all as specified and directed.

M&L for 10 mm thick rendering in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement as on wall complete all as specified and directed.

Material and labour for 15 mm thick rendering in cement mortar 1:4 mixed with approved water proofing compound on fair faces of brick surfaces or concrete surfaces, surface finished even and smooth without using extra cement all as specified and directed. Note: Water proofing compound shall be measured and paid separately.

M&L for 5 mm thick rendering in cement mortar 1:3 on concrete surfaces of roof projection/ ceiling etc surface finished even and smooth without using extra cement, complete all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces of wall and applying two coats of oil emulsion distemper over 1.5 mm thick JK/Birla wall care putty to achieve smooth finish surface, complete all as specified and directed.

M&L for complete removal of existing treatment from wall surfaces and applying two coats of oil emulsion distemper over 1.5 mm thick JK/Birla wall care putty to achieve smooth finish surface, complete all as specified and directed.

Applying two coats of exterior acrylic emulsion (weather proof treatment ), in plain patterns, over old plastered surfaces , including preparation and using primer new surfaces ,complete all as specified and directed.

M&L for prepration of new or previously untreated wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises, complete all as specified and directed.

M&L for coloured glazed ceramic tiles of approved shade of size 450 x 300 mm x 7 to 8mm thick as in vertical surface etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 10mm thick rendering in cement mortar 1:4, complete all as specified and directed.

M&L for anti skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11 Sqm but n exc 0.18 Sqm, in flooring etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bed in cement mortar 1:6, complete all as specified and directed.

Excavation over areas n exc 1.5 m deep and getting out in soft / loose soil

Excavating over areas exc 1.5m deep and not exc 3m deep getting out in soft/loose soil

Excavating over areas exc 3 m deep and not exc 4.5m deep getting out in soft/loose soil

M& L Brickwork with sub class ‘B’ bricks in one brick thick honey comb walling, built in cement mortar 1:4 complete all as specified.

M&L hardcore of broken bricks in Loose filling with aggregates of gauge 80 to 150 mm in soakage pits, soakage wells. complete all as specified.

M&L for RCC(1:2:4), type B1 (using 20 mm graded stone aggregate) Precast cement concrete cover slab for manhole and similar article with plain face, set in cement mortar 1:4 complete all as specified and direceted.

M&L Forming embankments including raising (or lowering) earth, spreading in layers n exc. 30 cm thick;watering, ramming and finishing to required size, shape,etc., n exc. 1.5 m high from base as specified and directed by Engineer in charge

M&L Hardcore of gauge n. exc 63mm, deposited, spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surface in broken stones or boulders all as specified and as directed by Engr-in-Charge

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade,with grey cement and pigment including 25 mm thick layer of fine sand complete all as specified and as directed.

Demolition of stone slabs/paver block and tiles of any description or thickness in floors, aprons etc., laid, bedded and pointed in any mortar, complete all as specified and directed.

M&L Granite 20 mm thick of any type work(table rubbed and polished) in steps, jambs, pillars, windows cill WHB platform and like including pointing in white/colour cement and pigment to match with shade of granite including bull nosing of external. complete all as specified and as directed. complete all as specified and directed.

S&F Vitreous china wash down water closet pan (Pedestal pattern incl one toilet paper holder, one health faucet and jet ingrated controlled by two way angle valve) incl plastic water closet seat white colour closed pattern with flat bottom and cover and MS CP aluminium/PVC hinging devices complete all as directed and specified by Engr-in-charge.

S&F PVC valveless, dual type, syphonic action type flushing cistern, 10 litres capacity, plunger type, low level, white with inlet, ball valve, float , 32 mm dia PVC long bend flush pipe 90cm long, complete all as specified and directed.

Supply and fixing, wash hand basin vitreous china flat back 550 x400 mm size white, first quality, with and including PVC waste coupling 32mm size, PVC waste pipe 32mm bore, brackets of Mild Steel angle iron (35mmx35mmx5mm) of suitable size including two coat of synthetic enamel paint over a coat of primer over angle iron brackets to walls complete all as specified and as directed.

S & F Vitreous China urinals, half stall (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushingcistern, trap and waste pipe

S&F stop/angle valves, 15mm bore, fancy type, chromium plated, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, both ends screwed for iron pipe or for union etc., complete all as specified and directed.

S&F PVC connection 15mm dia, 600mm long, hot water grade with brass chromium plated nuts and washers at both ends, complete all as specified.

S&F Brass chromium plated shower rose of 125mm size with or without swivel joints with arms suitable for 15mm bore pipe, complete all as specified.

S&F bib tap, 15mm bore, fancy type, chromium plated, cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed.

S&F soap dish, brass chromium plated, complete all as specified and directed.

S&F tubular towel rail brass chromium plated, 20mm dia, D type, 60cm long between flanges, complete all as specified and directed.

S&F PVC (SWR) pipes, 110mm dia, single socketed, in any length with rubber ring joints, laid in trenches or in floors or walls, complete all as specified & directed.Make: Finolex/Reliance/Supreme

S&F 110mm bore PVC (SWR) bends any radius, complete all as specified and directed.

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or floors including suitable clamps after every one meter of interval, complete all as specified and directed. Make: Finolex/Reliance/Supreme

S&F110 mm bore PVC (SWR) vent cowl, complete all as specified.

PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm dia out let

PVC (SWR) multi floor trap with grating including jointing with solvent cement 100 mm dia out let.

Taking up or down GI tubing with all connections and fittings of 15 mm bore complete all as specified and as directed.

Taking up or down GI tubing with all connections and fittings of 20 mm bore complete all as specified and as directed.

M&L for cutting chases in brick or concrete wall, floor, ceiling surface etc for concealed water tubing and making good with pointing in cement mortar 1:3 exc 10cm but not exc. 20cm girth in brick walls etc. complete all as specified.

S&F galvanized iron water tubing, ‘medium grade’ 15mm bore, with all fittings such as bend, tee, union etc., fixed complete to walls and ceilings or laid in floors, complete all as specified & directed.

S&F galvanized iron water tubing, ‘medium grade’ 20mm bore, with all fittings such as bend, tee, union etc., fixed complete to floor, walls and ceilings or laid in floors, complete all as specified & directed.

Dismantling water tank of capacity 500 Ltr of any type, complete all as specified and directed.

S&F Rotational moulded plythelene white water storage tank tripple layered white coloured, 500 litres capacity (cylinderical vertical with cxlosed top) hoisted with thread tank cover and fixed in position including GI tank nipple & with union(two nos each), including 20mm for ball valve brass high pressure, with polythene float and fly nut complete all as specified and directed.

S&F gun metal globe or gate valves with iron wheel head screwed both end for iron pipe and fixed in repairs to 15 mm bore pipe.

S&F gun metal globe or gate valves with iron wheel head screwed both end for iron pipe and fixed in repairs to 20 mm bore pipe.

Supply only integral water proofing compound complete all as specified

Dismantling brick tiles or terracing tiles sinlge layer on roofs.

M&L for 40 mm thick brick tiles laid on and joints grouted flush in cement mortar 1:3 mixed with 5% crude oil by weight of cement on above treated surface complete all as specified and directed.

Same as ditto item no 62, but except in bricks.

M&L flush pointing to brick laid flat or brick tiles in paving cement mortar in 1:3.

M&L for APP based polymeric membrane minimum weighing 3 Kg/Sqm and minimum 3mm thick reinforced with polyester non wove fabric (wt not less than 150 gms/sqm) laid over a tack coat of dustrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning over primed surface complete all as specified and as directed by Engr in Charge.

M&L for 10 mm thick rendering in cement mortar 1:4 on roof surface using water proofing compound as per manufacturer instruction surfaces finished even and fair without using extra cement as on wall complete all as specified and directed. (WPC shall be measured and paid for seperately).

S&F powder coated anodized aluminium frame for doors, windows, ventilators with one or more rebates including jointing cleat for fixing etc. complete all as specified including powder coating (minimum thickness of powder coating 50 micron), complete all as specified and directed

S&F for powder coated anodized aluminum window and ventilator shutter, side hung type without sash, aluminum sections weighing 0.55kg/m incl necessary jointing cleats, glazing clips, rubber packing, anodized aluminum snap beading, screws, anodized aluminum fittings such as peg stays 150mm long (1No) hinges type B-21 100mm long(2 No) suitable handle (1 No), complete all as specified and directed.

S&F 35 mm thick 2nd class Hard wood plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated completely all specified and directed.

S&F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fitted in openings as per specification and drawing shown in SSR Part-II, complete all as specified.

S&F 30 mm thick factory made solid panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 20mm x 40mm for stiles as well as top, bottom & lock rail. M.S. frame shall have a coat of metal primer of approved make & manufacturer. The inside panel shall consist of 20mm thick multi-chamber hollow PVC section of 1mm wall thickness, bonded using solvent cement / cynoacrylate adhesive with 5 mm thick moulded PVC sheet of density 600 kg/cbm with 2, 4, 6 raised panel deign in plain / prelam colours after routing the moulded design on one side of the inside panel. 5 mm plain / prelam PVC sheet to be pasted using solvent cement / cynoacrylate adhesive on other side of the hollow PVC section. All the four edge of the panel to be sealed with lipping of 10 mm thick & 20 mm wide PVC sheet baton made by sticking 2 nos. foam PVC sheets of 5 mm thickness using PVC solvent cement adhesive. Door edge lipping to be painted with PVC ink of matching colour of Plain/Prelam moulded PVC sheet of door 20 mm thick (5 mm x 4 nos.) thick PVC sheet to be given for lock provison at lock height complete as per manufacturer’s specification and drawing or direction of Engineer-in-charge.

S&F butt hinges, medium weight, cold rolled, mild steel 100 mm long (ISI marked), complete all as specified.

S&F Aluminum handles, 150 mm size plate type complete all as specified and directed.

S&F aluminium anodised, barrel tower bolt of extruded section and fixed, 150 mm long (ISI marked), complete all as specified.

M&L for rough cast plaster with a mixture consisting of crushed stone or fine gravel aggregate of size 6mm to 8mm as directed, mixed with coarse sand, fine sand and cement in the ratio of 1:1:1, finished even rendereing with under coat 15mm thick cement and sand mortar 1:3 complete all as specified and directed

Demolition of reinforced cement concrete of any description in any position not otherwise specifically provided for (Reinforcement cut as required to facilitate demolition), complete all as specified.

M&L for reinforcement cement concrete M-25 (design mix) using 20 mm graded aggregate )slab supported on (wall, beams and columns in floors), roofs, landings, balconies, canopies, deck slabs and in shelves. complete all as specified

All as per item No 77 above here in before but as in Column/Pillar. complete all as specified

All as per item No 77 above here in before but as in foundation, footings,foundation beams, plinth beams and mass concrete. complete all as specified

All as per item No 77 above here in before but as in beams, cantilevers, linter over 1.5 mtr span. complete all as specified

M&L for TMT mild steel bars 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for column, hooking end and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M & L for TMT bars 6 mm to 8 mm dia and over cut to length, bent to shape reqd, including cranking and binding with and including MS wire annealed) not less than 0.9mm dia or securing with clips as in stirrups, spacers and binders. complete all as specified and directed

M & L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping). Complete all as specified and directed.

M & L for formwork to sides and soffits of floor or roof beams, beam haunch ings, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. Complete all as specified and directed.

M & L for formwork to sides of concrete foundation, footings, basis of column, plinth beams as for rough finished surfaces. Complete all as specified and directed.

M & L square or rectangular Formwork to sides of pillars, posts, struts, piers, columns and stanchions etc. for fair finished surfaces of concrete complete all as specified.

Formwork to edges of concrete flats, treads, breaks in floors,window cills, concrete railings,openings in concretewalls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontalor sloping and similarwork exc 5cm but n exc 10cm

S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and lush pipe) including provn of lime concrete. Complete all as specified and directed.

M&L for cement concrete 1:2:4 type B2 by using 40 mm graded cushed stone aggregate in surface channels and drains etc complete all as specified and directed.

M&L for PCC 1:2:4, type B-0 using 12.5mm graded crushed stone aggregate as in coping, benching, complete all as specified & directed.

Demolition of cement concrete bed in haunching and breaking up RCC drain pipes set in cement mortar of 150 mm Dia. Complete all as specified & directed.

M&L for concrete bed in P.C.C. 1:4:8 type D2 (using 40mm graded aggregated) to drain pipes including packing under and haunching against the sides of the pipes after laying & testing for the 150 mm Dia

M&L for reinforced concrete NP2 drain pipes 150 mm bore pipes confirming to IS laid in trenches and jointed in CM 1:2 all as specified & directed by EIC

M & L for cutting in to existing manhole for connectiing new drain 150 mm bore , making good to pipe & renderring cutting out existing benching for & forming branch channel in cement concrete ( 1:2:4) type B1 smooth finished & reforming benching as requierd.

M&L Providing and injecting chemical emulsion for Post Constructional Anti-termite Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors all as specified by Engineer-in-charge.

M&L Providing and injecting chemical emulsion for Post Constructional Anti-termite TreatmentAlong the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified by Engineer-in-charge.

Excavating in trenches, not exc 1.5 m wide and not exc 1.5 m in depth; for foundation, etc. or manholes, pier holes, etc. not exc 10 sqm on plan and getting out in soft loose soil complete all as specified and directed.

Returning, filling in,including spreading, levelling, watering and well ramming in layers not exc 25 cm as in soft loose soil, complete all as specified and directed.

Removing excavated material not exc. 50m and depositing where directed at a level not exc. 1.5 m above the starting point, complete all as specified and directed.

Taking down of old flushing cistern, water closet, urinal, WHB etc

Taking down of old Bib tap, stop valve, PVC connection, looking mirror

(E/MPart):-Supply and fix exhaust fan, steel body AC single Phase. 230V copper winding of size 300mm sweep with, blades, and frame and louvers complete all as specified and as directed

Taking down carefully unserviceable copper/aluminium point wiring (light, fan, socket or power)complete including fixture and fitting such as switches, ceiling rose lamp holder, regulators, sockets, light fittings, wooden terminal boxes, plastic laminated sheet cover, including taking down of DB’s, meter board any type all as specified and as directed.

Dismantling and taking down fluorescent tube light single/double of any wattage or size fitting for repair or replacement of burnt/worn out accessories or carrying to MES store(Accessories or components to be provided free for replacment by department), complete all as specified and as directed.

Taking down unserviceable sub main wiring of any type/size including wires, conduits/batten etc, complete all as specified and as directed.

M&L for point wiring with single core PVC insulated unsheathed 1100 volts grade FRLS cable of copper conductor multi stranded of size 1.5 sqmm (Nominal size) drawn through and including non metallic rigid PVC conduit medium grade, ISI marked not less then 20/25 mm dia with all accessories like tee, straight joint, L bend etc concealed in wall , ceiling , floor etc, pressed MS Sunken boxes in wall of required size and colour for switches and sockets, 1.5 sqmm (Nominal size) PVC insulated (green insulation) copper conductor FRLS earth continuity cable drawn with wiring and connected to common earth dolly all as specified for one light point/Ceiling fan/ Ehaust Fan and wall mount fan controlled by one SP switch including making good distrubed surface, complete all as specified and directed. Note :- Cost for MS Sunken Boxes, Hylum sheets are cutting, chieseling and cutting the wall/Ceiling for conduit fixing, making good to existing surfaces (Matching with existing colour) shall deemed to be included in the quoted rate.

S & F switch piano flush button single pole one way 5 amp 240 volts, all as specified and as directed.

S&F of ceiling rose, surface type, 65mm x 50mm, 3 terminal complete all as specified and as directed by Engr-in-Charge.

Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceilingrose complete all as specified and directed by Engr-in-Charge.

S&F LED sleek mirror light fitting 10 watt provided with high output diffuser 2 feet, 230 Volts complete LED tube rod 10 watt with all accessories, pre wired and including connecting up with twin core copper conductor cable complete all as specified and directed by Engr-in-Charge.

S&F LED bulkhead luminaire 10 watt, wall/surface mounted complete with LED lamp 10 watt, all accessories, pre-wired including providing flexible copper wire, twin core cable PVC insulated sheathed, complete all as specified and directed .

M&L for cutting openning through brick wall 230mm thick built in cement motar suitable for exhaust fan 250 mm seep including making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required, complete all specified and directed.

M&L for submain wiring with two single core 4.0 sq mm PVC insulated FRLS multistranded copper conductor cable drawing into and including rigid non metallic PVC conduit of size not less than 25mm dia, medium grade ISI marked with all conduit fittings & fixing accessories and one single core 4.0 Sqmm multistranded copper conductor cable as continuous earth wire complete all as sepcified and as directed. Note- (a) The two runs of single core cable and specified earth continuity conductor and PVC conduit with fitting acessories will be measured as one run. (b) Cost of cutting, chasing and make good to existing surfaces are deemed to be including in the quoted rate by the contractor.

Supply & laying of LT UG cable XLPE insulated armoured heavy duty elect cable with stranded aluminium conductor 1100 volts grade cross section area 6 Sqmm 2 core as per IS 7098 (Part-I) laid in trenches/ fixing on panels/walls/poles or passing through pipe including connecting with suitable lugs, glands, nuts and bolts and testing complete all as specified and directed.

S&F for laying GI Pipe light grade 40mm nominal bore for cable protection in floor/road crossing/along pole complete all as specified and as directed.

S&F sheet metal enclosure for distribution board SPN (when MCBs to be used) 4 way double door, 200 Amps rated bus bars and with neutral, earthing bar and din rail complete all as specified and as directed by Engr-in-Charge.

S&F of MCB SP, 6-32A,10KA, 'C' Curve complete all as specified and as directed .

S&F of MCB SPN, 40 to 63A ,10KA, 'C' Curve complete all as specified and as directed.

Contract Amount shall be derived after deducting the amount of Schedule of Credit in General Summary on serial page No 17 of tender documents.

M/s Shubham Enterprises (BID ID -3364792)

SRI SAI CONSTRUCTION COMPANY (BID ID -3362635)