SPL REP TO INTERNAL FENCING ALONGWITH IRON POLE FROM MH AREA INCLUDING ADJACENT CONTROL ROOM PERS COOK HOUSES, PERS LINE, JCOS MESS TO GATE NO 3 (CHANAKYA DWAR) (APPROX 1500 MTRS) AT MH AND OTHER SANCTIONED WKS IN THE AREA OF B/R-I UNDER GE PANAGARH

Amount

Excavation in trenches, n.exc 1.5 m wide and n.exc 1.5m in depth; for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc.n.exc 10 sqm on plan and n.exc 1.5 mtr in depth and getting out soft/loose soil complete all as specified and directed.

M&L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed

M&L for PCC type D2 1:4:8 (using 40 mm graded stone aggregate) in foundation, filling and mass-concrete complete all as specified and directed.

M&L for cement concrete type B-0 1:2:4 (using 12.5mm graded stone aggregate) in cills, steps, plinth courses, string courses, lacing courses, parapets, copings, kneelers, apex stones, bed plates, kerbs water troughs and the like including weathering, slightly rounded for chamfered angles and throating, as directed rounded or chamfered on edges complete all as specified and directed

M&L for rendering 15mm thick on fair faces of brickwork or concrete surfaces in cement mortar (1:4) and finish smooth & even without using extra cement complete all as specified and directed

M&L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint complete all as specified and directed.

Dismantling post (Steel or RCC) any section including taking out embedded portion in concrete, brickwork, masonary, etc and making good disturbed portion complete all as specified and directed

Excavation in post holes (or similar holes)each n.exc 0.5 cum getting out, returning filling in and ramming earth and removing surplus soil to a distance n.exc 50 m and making good surface in soft/loose soil complete all as specified and directed.

M&L for cement concrete in foundations, filling and mass concrete , type C-2 1:3:6 (using 40 mm graded stone aggregate) complete all as specified and directed

S&F hand rails, half round or other section or core for wooden hand-rail straight portions, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc, wind ties for roof including, screwing bolts; posts and struts in fencing including cutting tops to shapes as directed, drilling holes, notching for wire, etc; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting etc, and similar work conforming to Fe-290(Gde-E-165) complete all as specified and directed.

M&L for two coats of synthetic enamel paint on new surface over one coat of red oxide primer including preparation of surface of any description, over 10 cm in width or girth not other wise described complete all as specified and directed by Engg-in-Charge.

Dismantling fencing wire mesh any type complete all as specified and directed by Engineer- in -Charge

Supply only chain link MS galvanised fencing of mesh size 75x75 mm with min dia of wire 3.5 mm of weight per square metre n.exc 4 kg, complete all as specified and directed by Engr-in-Charge.

Fixing only chain link fencing (size of mesh 75x75x4mm) including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire, complete all as specified and directed by Engr-in-Charge.

S&F mild steel screw bolts (machine made)with hexagonal or square heads at one end and screw other .and each screw end to be fixed with washers and nut exc 5 cm but n.exc 10 cm long complete all as specified and directed

S&F PVC (SWR) pipes 75mm single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

Returning filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm in soft/loose soil complete all as specified and directed.

Removing excavated surplus soil exc 250 mtr but n.exc. 500 m and depositing where directed complete all as specified and directed.

M&L for hardcore broken stone or boulder of gauge n.exc. 63mm, (broken stone/ boulders) deposited, spread and leveled in layers n.exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed

M&L for RCC 1:2:4 Type B1 (using 20 mm graded stone aggregate) as in beams, cantilevers, bressummers, lintel over 1.5m span complete all as specified and directed.

M&L for RCC 1:2:4 Type B1 (using 20 mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for TMT bars 10 mm dia and over cut to length bent to shape required including cranking, bending spirally for hoping for columns, hocking, ends and binding with and incl MS wire (appealed) not less than 0.9 mm dia complete all as specified and directed.

M&L for TMT bar but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; n.exc 200mm thick (horizontal or sloping) complete all as specified and directed.

M&L for providing precast cement concrete louvers and jallies, 25mm thick (measured solid), type B0 1:2:4 (using 12.5mm graded aggregate), set in cement mortar (1:6) including all moulding but excluding frame, complete all as specified and directed.

S&F mild steel angle and flate iron section fixed independently with out connecting plate of Fe-290 (Gde-E-165) complete all as specified and directed

Surface excavation, n.exc 30 cm deep and averaging15cm deep and getting out in soft/loose soil complete all as specified and directed.

M&L for PCC 1:4:8, type D2, 100 mm thick, finished even and rough to receive top surfaces complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any hape and size confirming to IS 15658-2006 of 60 mm thickness, M-35Grade complete all as specified and directed.

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

Jaibalaji Enterprise

M/S S M ENTERPRISE

M/S AMARNATH AGARWALLA

SARASWATI ENTERPRISE (INDEX NO CEEC D-81)

UNIVERSAL TRADING