REPAIRS, RECANNING AND POLISHING OF WOODEN FURNITURE AT AIR FORCE STATION PATHANKOT, JANDWAL AND DALHOUSIE UNDER GE AIR FORCE PATHANKOT

Amount

ALMIRAH LARGE SHELVES (W) : Replacement of front shutter of almirah large with shelves with new suitable size complete as existing as directed by Eng-in-Charge

All as per item No 1.00 above but replacement of unserviceable planks of the shelf with a new plank of the shelf of suitable size as existing as directed by Eng-in-Charge

All as per item No 1.00 above but but replacement of unserviceable butt hinges 75mm long with 75mm long butt hinges med grade ISI marked as directed by Eng-in-Charge

All as per item No 1.00 above but replacement of hasp and staple of 100 mm with new chrome plated mild steel hasp and staple of 100 mm ISI marked as directed by Eng-in-Charge

All as per item No 1.00 above but replacement of unserviceable long front stiffner at the base of almirah of suitable size complete as directed by Eng-in-Charge

All as per item No 1.00 above but replacement of unserviceable short stiffner at the base of almirah of suitable size as existing complete as directed by Eng-in-Charge

All as per item No. 1.00 preparation of old wooden polished surfaces by rubbing down the old polish from the wooden surfces with sand paper removing pluck marks with wooden scrapper, cleaning of durt and plugging of holes by filling putty by adding colour of required qty to obtained the desired colour, wiping of the polish from other than wooden surfaces with polish thinner and applying french polish of 1st quality as directed by Eng-in-Charge

Bed Plywood Top (FD-247, 246) : Removing old damaged/unserviceable head rest of bed plywood and supply & fixing new head rest (of suitable size and as existing) with 4.0 mm thick one side teak faced plywood including prepration of surface & applying high gloss french polish on newly fixed head rest so as to match the colour with existing surface complete all as specified and directed by Engr-in-charge

All as per item No 2.00 above but unserviceable foot rest complete.

All as per item No 2.00 above but removing old damaged/unserviceable long rails of bed plywood top and supply and fixing new long rails made of Ist class hard wood (MP teak) minimum size 1920x100x35 mm and applying high gloss French polish on newly fixed long rails to match the colour with existing surface complete all as specified and directed by Engr-in-charge

All as per item No 2.00 above but removing old damaged plywood top and supply and fixing new ply wood of suitable size, 12 mm thick Kitply, Eco Board, Century BWR ISI marked as per complete all as specified and directed Engr-in-charge.

All as per item No 2.00 above but removing old damaged stiffner 40mmx60mm and supply and fixing new stiffner of teak wood Ist class suitable size as per drawing all as specified and directed by Engr-in-charge

All as per item No 2.00 above but removing old damaged Leg and supply and fixing of new leg of length 660mm of section 60mm x 30mm from 400mm to 660mm and section 60 x60 at 400mm and 30 x30 at bottom of the leg of teak wood Ist class suitable size as per drawing all as specified and directed by Engr-in-charge

All as per item No 2.00 above but removing old damaged leg at the foot and supply are fixing new leg of length 500 mm of section 60mm x30 mm from 500mm to 400mm and section 60x60 at 400mm and 30x30at bottom of the leg of teak wood Ist class suitable size as per drawing all as specified and directed by Eng-in-Charge.

All as per item No 2.00 above here-in-before but Supply and fixing of teak wooden corners of 50'x50'x40' size joining legs with top rails complete all as specified and directed by Engr-in-charge

All as per item No 2.00 above here-in-before but removing old damaged top/bottom batten of headrest /footrest of 22mm thick and supply and fixing new softwood batten of headrest /footrest of suitable size as existing all as specified and directed by Engr-in-charge

All as per item No 2.00 above here-in-before but tightening of all parts/joints of whole bed plywood with bamboo pins.

All as per item No. 2.00 preparation of old wooden polished surfaces by rubbing down the old polish from the wooden surfces with sand paper removing pluck marks with wooden scrapper, cleaning of durt and plugging of holes by filling putty by adding colour of required qty to obtained the desired colour, wiping of the polish from other than wooden surfaces with polish thinner and applying french polish of 1st quality as directed by Eng-in-Charge

BOOK CASE SECTIONAL: Removing the unservicable /damaged /broken long rail of base and supply and fixing a new long rail of base made from teakwood as existing as specified by Engr-in-Charge.

All as per item No 3.00 above but Removing the unservicable /damaged /broken short rail of base and supply and fixing a new short rail of base made from teakwood as existing as specified by Engr-in-Charge.

All as per item No 3.00 above but Removing the unservicable/ damaged/ broken glass and supply and fixing a new glass as existing/as specified by Engr-in-Charge.

All as per item No 3.00 above but Removing the unservicable/damaged/broken handle and supply and fixing a new handle ISI marked as per as specified by Engr-in-Charge.

All as per item No 3.00 but Removing the unservicable/damaged/broken door and supply and fixing a new door made from teakwood as existing as specified by Engr-in-Charge.

All as per item No. 3.00 preparation of old wooden polished surfaces by rubbing down the old polish from the wooden surfces with sand paper removing pluck marks with wooden scrapper, cleaning of durt and plugging of holes by filling putty by adding colour of required qty to obtained the desired colour, wiping of the polish from other than wooden surfaces with polish thinner and applying french polish of 1st quality as directed by Eng-in-Charge

CHAIR DINNING LONG BACK FD-357/Chair dinning cuhioned : Replacement of unserviceable tapestry cloth of back and seat both, of chair dinning with new tapestry cloth with minimum rate not less than Rs 250 per Sqm as approved by Eng-in-Charge.

All as per item No 4.00 above but replacement of new cushion 32 density of 50mm thickness superior quality make Kurlson as per suitable size of seat and back made to size all as specified and directed by Engr-in-charge

All as per item No 4.00 above here-in-before but replacement of unserviceable front legs complete all as specified and directed Engr-in-charge

All as per item No 4.00 above here-in-before but replacement of rear legs of suitable size complete all as specified and directed by Engr-in-charge

All as per item No 4.00 above here-in-before but replacement of side rails with of teak wood 40mmx20mm made to size as existing all as specified and directed by Engr-in-charge

All as per item No 4.00 above here-in-before but replacement of side/centre stiffner all as specified and directed by Engr-in-charge

All as per item No 4.00 above here-in-before but replacement of Back/Front rail of seat with new teak wood rail of complete all as specified and directed by Engr-in-charge

All as per item No 4.00 above here-in-before but replacement of batten of the back of the chair with new teak wood batten of the back complete all as existing/specified and directed by Engr-in-charge

All as per item No 4.00 above here-in-before but replacement of Batten of the seat with new teak wood batten 70mmx10mm all as specified and directed by Engr-in-charge

All as per item No 4.00 above here-in-before but Tightening of all parts/joints of whole chair dinning long back with bamboo pins/as directed by Engr-in-Charge.

All as per item No. 4.00 preparation of old wooden polished surfaces by rubbing down the old polish from the wooden surfces with sand paper removing pluck marks with wooden scrapper, cleaning of durt and plugging of holes by filling putty by adding colour of required qty to obtained the desired colour, wiping of the polish from other than wooden surfaces with polish thinner and applying french polish of 1st quality as directed by EEngr-in-Charge.

CHAIR EASY WITH CUSHIONED : Replacement of unserviceable tapestry cloth with new tapestry cloth of shade and seat, arms and back with minimum rate not less than Rs 250 per Sqm as approved by GE as directed by Engr-in-Charge.

All as per item No 5.00 above but treplacement of unserviceable foam of seat with new foam of 75mm thickness 32 density duly upholstered as directed by Engr-in-Charge.

All as per item No 5.00 above here-in-before but replacement of unserviceable foam of back with new foam of 50mm thickness 32 density duly upholsteredas as directed by Engr-in-Charge.

All as per item No 5.00 above here-in-before but replacement of arm with new teak wood arm of 65x25mm of suitable size/as existing complete as directed by Engr-in-Charge.

All as per item No 5.00 above here-in-before but replacement of unserviceable front legs as directed by Engr-in-Charge.

All as per item No 5.00 above but replacement of unserviceable rear legs as directed by Engr-in-Charge.

All as per item No 5.00 above here-in-before but replacement of plywood seat with 6mm thick commercial plywood as directed by Engr-in-Charge.

All as per item No 5.00 above here-in-before but replacement of side/centre stiffner all as specified and directed by Engr-in-Charge.

All as per item No 5.00 above here-in-before but replacement of old unserviceable PVC buffers and supply and fixing by screw PVC buffers/rings of suitable size as dircted by Engr-in-Charge.

All as per item No 5.00 above here-in-before but Tightening of all parts/joints of chair easy cushioned with bamboo pins.

All as per item No. 5.00 preparation of old wooden polished surfaces by rubbing down the old polish from the wooden surfces with sand paper removing pluck marks with wooden scrapper, cleaning of durt and plugging of holes by filling putty by adding colour of required qty to obtained the desired colour, wiping of the polish from other than wooden surfaces with polish thinner and applying french polish of 1st quality as directed by Engr-in-Charge.

Chair Dinning (Drawing Nos FD-16, 279, 228): Taking out old broken unserviceable front leg of chair dining and supply & fixing new front leg of suitable size, made of Ist class hard wood (MP teak) including preparation of surfaces and applying high gloss French polish on newly fixed leg to match the colour with existing chair complete all as specified and directed by Engr-in-Charge.

All as per item No 6.00 above but rear legs complete as existing.

All as per item No 6.00 above but side rails complete as existing.

All as per item No 6.00 above here-in-before but rear rails complete as existing.

All as per item No 6.00 above here-in-before but front rails complete as existing.

All as per item No 6.00 above here-in-before but side stiffeners complete as existing.

All as per item No 6.00 above here-in-before but center stiffeners complete as existing.

All as per item No 6.00 above here-in-before but Back Rest complete as existing.

All as per item No 6.00 above here-in-before but Removing old damaged canning chair dinning, supply & re-canning with white virgin plastic cane 2.0 mm wide, oval shape (half round) as per Godrej pattern complete all as specified.

All as per item No 6.00 above here-in-before but Tightening of all parts/joints of whole chair dinning with bamboo pins.

All as per item No 6.00 above here-in-before but Replacement of old unserviceable PVC buffers and supply and fixing by screw PVC buffers/rings of suitable size as dircted by Engr-in-Charge.

All as per item No. 6.00 preparation of old wooden polished surfaces by rubbing down the old polish from the wooden surfces with sand paper removing pluck marks with wooden scrapper, cleaning of durt and plugging of holes by filling putty by adding colour of required qty to obtained the desired colour, wiping of the polish from other than wooden surfaces with polish thinner and applying french polish of 1st quality as directed by Engr-in-Charge.

Chair writing (Drawing No FD-250, 280) :- Taking out old broken unserviceable front leg of chair writing and supply and fixing new front leg of suitable size, made of Ist class hard wood (MP teak) including prepration of surfaces and applying high gloss french polish on newly fixed leg to match the colour with existing chair complete.

All as per item No 7.00 above but rear legs complete as existing.

All as per item No 7.00 above but side rails complete as existing.

All as per item No 7.00 above but rear rails complete as existing.

All as per item No 7.00 above but Front rails complete as existing.

All as per item No 7.00 above but side stiffeners complete as existing.

All as per item No 7.00 above but centre stiffeners complete as existing.

All as per item No 7.00 above here-in-before but Back Rest complete as existing.

All as per item No 7.00 above here-in-before but arm complete as existing.

All as per item No 7.00 above here-in-before but Removing old canning from existing chair writing and supply & re-canning with white virgin plastic cane 2 mm wide, oval shape (half round) as per Godrej pattern complete all as specified.

All as per item No 7.00 above here-in-before but Tightening of all parts/joints of whole chair writing with bamboo pins.

All as per item No 7.00 above here-in-before but Replacement of old unserviceable PVC buffers and supply and fixing by screw PVC buffers/rings of suitable size as directed by Engr-in-Charge.

All as per item No. 7.00 preparation of old wooden polished surfaces by rubbing down the old polish from the wooden surfces with sand paper removing pluck marks with wooden scrapper, cleaning of durt and plugging of holes by filling putty by adding colour of required qty to obtained the desired colour, wiping of the polish from other than wooden surfaces with polish thinner and applying french polish of 1st quality as directed by Engr-in-Charge.

Chair Easy (Drawing No FD-229):- Taking out old broken unserviceable front leg of chair easy and supply & fixing new front leg of suitable size made of Ist class hard wood (MP Teak) including preparation of surfaces and applying high gloss french polish on newly fixed leg to match the colour with existing chair complete specified and directed by Engr-in-Charge.

All as per item No 8.00 above but rear leg complete as existing.

All as per item No 8.00 above but front rail of seat complete as existing.

All as per item No 8.00 above but rear rail of seat complete as existing.

All as per item No8.00 above but side rail of seat complete as existing.

All as per item No 8.00 above but top rail of back complete as existing.

All as per item No 8.00 above but bottom rail of back complete as existing.

All as per item No 8.00 above but side rail of back complete as existing.

All as per item No 8.00 above but arm complete as existing.

All as per item No 8.00 above but Removing old canning from existing chair easy and supply & re-canning with white virgin plastic cane 2 mm wide, oval shape (half round) as per Godrej pattern complete all as specified.

All as per item No 8.00 above but Tightening of all parts/joints of whole chair writing with bamboo pins.

All as per item No 8.00 above here-in-before but Replacement of old unserviceable PVC buffers and supply and fixing by screw PVC buffers/rings of suitable size as directed by Engr-in-Charge.

All as per item No. 8.00 preparation of old wooden polished surfaces by rubbing down the old polish from the wooden surfces with sand paper removing pluck marks with wooden scrapper, cleaning of durt and plugging of holes by filling putty by adding colour of required qty to obtained the desired colour, wiping of the polish from other than wooden surfaces with polish thinner and applying french polish of 1st quality as directed by Engr-in-Charge.

HAT STAND FD-46, 363, 364: Replacement of unserviceable mirror of hat stand without damaging the adjacent parts with new mirror 5mm thickness 300mm x 460mm complete including fixing of teakwood beading as existing/specified of quality approved by GE and as directed by Engr-in-Charge.

All as per item 9.00 above but replacement of unserviceable pegs of hat stand with peg BRAS ISI marked so as to match the existing peg of quality approved by GE as directed by Engr-in-Charge.

All as per item 9.00 above but replacement of unserviceable particle board with new particle board of 18mm thickness of exterior grade ISI marked with one side teak wood complete as approved by GE as directed by Engr-in-Charge.

All as per item 9.00 above but replacement of teak wood beading 6mm x 35mm edges round all round well chamfered complete as specified and directed by Engr-in-Charge.

All as per item 9.00 above but replacement of unserviceable metal key plates of suitable size as specified and directed by Engr-in-Charge.

All as per item No. 9.00 preparation of old wooden polished surfaces by rubbing down the old polish from the wooden surfces with sand paper removing pluck marks with wooden scrapper, cleaning of durt and plugging of holes by filling putty by adding colour of required qty to obtained the desired colour, wiping of the polish from other than wooden surfaces with polish thinner and applying french polish of 1st quality as directed by Engr-in-Charge.

Locker Bed Side (Drawing No FD-54 M, FD-222) : Taking out old unserviceable panel shutter of locker bed side and providing panel shutter right or left or both side as required, made to shape and size as existing/complete in all as specified and directed by Engr-in-Charge.

All as per item No 10.00 above but providing 6mm thick BWR ply wood, on back side of lockers, fixed with wood screws complete.

All as per item No 10.00 above but providing hasp and staple of size 75mm of aluminum to be fixed with screws complete.

All as per item No 10.00 above but providing 19 mm dia conduit pipe with socket ISI Marked as shown in drawing

All as per item No 10.00 above removing existing unserviceable front stiffener and providing new teak wood stiffener 40 x 25 mm size complete

All as per item No 10.00 above but removing existing unserviceable legs and providing new teak wood legs 50x50 mm at top and 40x40 mm at bottom complete

All as per item No 10.00 above but replacement of shelf of 18mm thick prelaminated particle board exterior grade of teak wood shade made to size as directed and specified by GE/Engr-in-charge

All as per item No 10.00 above but providing aluminium handle of 100mm (ISI marked) as approved by GE/Engr-in-charge

All as per item No. 10.00 preparation of old wooden polished surfaces by rubbing down the old polish from the wooden surfces with sand paper removing pluck marks with wooden scrapper, cleaning of durt and plugging of holes by filling putty by adding colour of required qty to obtained the desired colour, wiping of the polish from other than wooden surfaces with polish thinner and applying french polish of 1st quality as directed by Engr-in-Charge.

SIDE BOARD (Drawing No FD- 26, 241, 371, 372):- Taking out old broken unserviceable leg of side board and supply & fixing new leg made of 1st class hard wood (MP Teak) of suitable size including preparation of new surfaces and applying high class french polish on newly fixed leg to match the colour with existing polished surfaces complete all as specified.

All as per item No 11.00 above but front and rear long stiffener complete

All as per item No 11.00 above but side stiffener complete

All as per item No 11.00 above but taking out old unserviceable back ply of side board and supply & fixing new back made out of 6 mm thick BWR grade ply wood of suitable size complete

All as per item No 22.00 above but taking out broken/unserviceable top/bottom of side board and in lieu of supply & fixing new top of side board suitable size, made of 18 mm thick pre-laminated particle board and including all round teak wood beading of 3 mm x 18 mm size fixed with adhesive and panel pins duly given a coat of high class french polish complete

All as per item No 11.00 above but shutter complete as directed by Engr-in-Charge.

All as per item No 11.00 above here-in-before but replacement of old unserviceable knobs and supply and fixing by aluminium anodised knobs with machine screw and washers ISI marked of approved quality by Engr-in-Charge.

All as per item No 11.00 above here-in-before but replacement of unserviceable 75mm butt hinges with new 75mm MS medium grade as existing butt hinges ISI marked

All as per item No 11.00 above but sides complete.

All as per item No. 11.00 preparation of old wooden polished surfaces by rubbing down the old polish from the wooden surfces with sand paper removing pluck marks with wooden scrapper, cleaning of durt and plugging of holes by filling putty by adding colour of required qty to obtained the desired colour, wiping of the polish from other than wooden surfaces with polish thinner and applying french polish of 1st quality as directed by Engr-in-Charge.

Sofa Set 5 Seater (Drawing No FD- 373, 281,258):- Taking out old Unservicable arm of sofa set 5 seater and S&F new arm of suitable size made out of Ist class hard wood (MP Teak) including preparation of new surfaces and applying high gloss French polish to match with the existing colour complete.

All as per item No 12.00 above but broken front/rear leg complete.

All as per item No 12.00 above but broken long rail of three seater complete.

All as per item No 12.00 above but broken side/front rail of seat complete.

All as per item No 12.00 above but broken side/top/bottom rail of back complete.

All as per item No 12.00 above but unservicable wooden bearers of seat/back complete.

All as per item No 12.00 above but unservicable wooden rail long 30mm x 50mm between back legs to support back frame complete as directed by GE/E-in-Charge

All as per item No 12.00 above here-in-before but removing old unserviceable ‘U’ foam along with tapestry cloth of existing sofa set and supply & providing new 100 mm thick ‘U’ foam, 40 density, size 530 x 560 mm, 100mm thick with tapestry cloth of make Kurlon approved quality minimium rate not less than Rs 250 per square meter complete.

All as per item No. 12.00 preparation of old wooden polished surfaces by rubbing down the old polish from the wooden surfces with sand paper removing pluck marks with wooden scrapper, cleaning of durt and plugging of holes by filling putty by adding colour of required qty to obtained the desired colour, wiping of the polish from other than wooden surfaces with polish thinner and applying french polish of 1st quality as directed by Engr-in-Charge.

Sofa Set 4 Seater (FD-258/281/373):- Taking out old Unservicable arm of sofa chair of set 4 seater and S&F new arm of suitable size made out of Ist class hard wood (MP Teak) including preparation of new surfaces and applying high gloss French polish to match with the existing colour complete.

All as per item No 13.00 above but broken front/rear leg complete.

All as per item No 13.00 above but broken front/side rail of the seat complete.

All as per item No 13.00 above but unservicable wooden bearers of seat or back complete.

All as per item No 13.00 above but broken side/top/bottom rail of the back complete.

All as per item No 13.00 above but unservicable wooden 30mm x 50mm between back legs to support back frame complete as directed by Engr-in-Charge.

All as per item No 13.00 above but removing old unserviceable ‘U’ foam along with tapestry cloth of existing sofa set and supply & providing new 100 mm thick ‘U’ foam, 40 density, size 530 x 560 mm, 100 mm thick make Kurlon with cloth of approved quality minimium rate not less than Rs 250 per square meter complete.

All as per item No. 13.00 preparation of old wooden polished surfaces by rubbing down the old polish from the wooden surfces with sand paper removing pluck marks with wooden scrapper, cleaning of durt and plugging of holes by filling putty by adding colour of required qty to obtained the desired colour, wiping of the polish from other than wooden surfaces with polish thinner and applying french polish of 1st quality as directed by Engr-in-Charge.

STOOL DRESSING Ladies (FD 252, 282) :- Taking out old broken unserviceable any leg of chair easy and supply & fixing new front leg of suitable size made of Ist class hard wood (MP Teak) including preparation of surfaces and applying high gloss french polish on newly fixed leg to match the colour with existing chair complete specified and directed by Engr-in-Charge.

All as per item No 14.00 above but front rail of seat complete.

All as per item No 14.00 above but side rail of seat complete.

All as per item No 14.00 above but side/central stiffner of seat complete.

All as per item No 14.00 above but here-in-before Removing old canning from existing stool dressing ladies and supply & re-canning with white virgin plastic cane 2 mm wide, oval shape (half round) as per Godrej pattern complete all as specified.

All as per item No. 14.00 preparation of old wooden polished surfaces by rubbing down the old polish from the wooden surfces with sand paper removing pluck marks with wooden scrapper, cleaning of durt and plugging of holes by filling putty by adding colour of required qty to obtained the desired colour, wiping of the polish from other than wooden surfaces with polish thinner and applying french polish of 1st quality as directed by Engr-in-Charge.

Table Peg (Drawing No FD- 25, 236, 227,384 ):- Taking out old broken unserviceable leg of table peg and supply & fixing new suitable leg made of Ist class hard wood (MP Teak) including preparation of surfaces and applying high gloss french polish on newly fixed leg to match the colour with existing polished surface complete all as specified and directed by Engr-in-Charge.

All as per item No 15.00 above but taking out broken/un-serviceable top of table peg and supply & fixing new teapoy top of suitable size, made of 18 mm thick particle board, exterior grade of suitable size, affixed with 1mm thick teak/any dark shade lamination sheet as approved by GE/Engr-in-charge using synthetic glue on the top including all around teak wood beading well chamfered joined at corners in mitre joint of size 4 mm x 18 mm fixed with adhesive and headless pins duly given a coat of high gloss French polish complete.

All as per item No 15.00 above but top rail complete.

All as per item No 15.00 above but bottom rail complete.

All as per item No 15.00 above but Replacement of old unserviceable PVC Buffers/Rings and supply and fixing by screw PVC buffers/rings of suitable size as directed by GE/E-in-Charge

All as per item No. 15.00 preparation of old wooden polished surfaces by rubbing down the old polish from the wooden surfces with sand paper removing pluck marks with wooden scrapper, cleaning of durt and plugging of holes by filling putty by adding colour of required qty to obtained the desired colour, wiping of the polish from other than wooden surfaces with polish thinner and applying french polish of 1st quality as directed by Engr-in-Charge.

Table Centre ( FD-29, 274, 235): Taking out old broken unserviceable leg of table centre and S&F new suitable leg made of 1st class hard wood (MP Teak) of suitable size including preparation of new surfaces and applying high gloss french polish on newly fixed leg to match the colour with existing polished surface complete all as specified by Engr-in-Charge.

All as per item No 16.00 above here-in-before but taking out broken/un-serviceable top of table centre and supply & fixing new teapoy top of suitable size, made of 18 mm thick particle board, exterior grade of suitable size, affixed with 1mm thick teak/any dark shade lamination sheet as approved by Engr-in-Charge using synthetic glue on the top including all around teak wood beading well chamfered joined at corners in mitre joint of size 4 mm x 18 mm fixed with adhesive and headless pins duly given a coat of high gloss French polish complete.

All as per item No 16.00 above here-in-brfore but rbroken long rail complete.

All as per item No 16.00 above here-in-brfore but short rail complete.

All as per item No 16.00 above but broken side stiffener complete.

All as per item No 16.00 above here-in-brfore but replacement of center stiffner 20 mm x50 mm joining the two long rails by dovetailed joint as directed by Engr-in-Charge.

All as per item No 16.00 above here-in-brfore but Replacement of old unserviceable PVC buffers and supply and fixing by screw PVC buffers/rings of suitable size as directed by Engr-in-Charge.

All as per item No. 16.00 preparation of old wooden polished surfaces by rubbing down the old polish from the wooden surfces with sand paper removing pluck marks with wooden scrapper, cleaning of durt and plugging of holes by filling putty by adding colour of required qty to obtained the desired colour, wiping of the polish from other than wooden surfaces with polish thinner and applying french polish of 1st quality as directed by Engr-in-Charge.

Teapoy ( FD- 64, 232, 278) : Taking out old unserviceable leg of teapoy and S&F new suitable leg made of 1st class hard wood (MP Teak) of suitable size including preparation of new surfaces and applying high gloss french polish on newly fixed to match the colour with existing polished surface complete all as specified and directed by Engr-in-Charge.

All as per item No. 17.00 above here-in-brfore but taking out broken/un-serviceable top of teapoy and supply & fixing new teapoy top of suitable size, made of 18 mm thick particle board, exterior grade of suitable size, affixed with 1mm thick teak/any dark shade lamination sheet as approved by Engr-in-Charge using synthetic glue on the top including all around teak wood beading well chamfered joined at corners in mitre joint of size 4 mm x 18 mm fixed with adhesive and headless pins duly given a coat of high gloss French polish complete.

All as per item No 17.00 above here-in-brfore but unserviceable top front/side rail.

All as per item No.17.00 above here-in-brfore but unserviceable bottom stiffner.

All as per item No.17.00 above here-in-brfore but replacement of old unserviceable PVC buffers and supply and fixing by screw PVC buffers/rings of suitable size as directed by Engr-in-Charge.

All as per item No. 17.00 preparation of old wooden polished surfaces by rubbing down the old polish from the wooden surfces with sand paper removing pluck marks with wooden scrapper, cleaning of durt and plugging of holes by filling putty by adding colour of required qty to obtained the desired colour, wiping of the polish from other than wooden surfaces with polish thinner and applying french polish of 1st quality as directed by Engr-in-Charge.

Table Dining 6 Person ( FD- 30, 239, 273, 376):- Taking out old unserviceable leg of table dining and supply & fixing new leg made of Ist class hard wood (MP Teak) of suitable size as existing including preparation of surface and applying high gloss French polish on newly fixed leg to match the colour with existing polished surface complete all as specified and directed by GE/ Engr-in-Charge.

All as per item No 18.00 above but unserviceable long rail of suitable size complete as exisitng.

All as per item No 18.00 above but unserviceable short rail of suitable size complete as exisitng.

All as per item No 18.00 above but taking out broken/un-serviceable top of table dining and supply & fixing new teapoy top of suitable size, made of 18 mm thick particle board, exterior grade of suitable size, affixed with 1mm thick teak/any dark shade lamination sheet as approved by Engr-in-Charge using synthetic glue on the top including all around teak wood beading well chamfered joined at corners in mitre joint of size 4 mm x 18 mm fixed with adhesive and headless pins duly given a coat of high gloss French polish complete.

All as per item No 18.00 above here-in-brfore but unserviceable 100mm x 25mm stiffners below the top and supply and fixing the new stiffner of suitable size in dovetailed joint between long rails size complete as directed by Engr-in-Charge.

All as per item No 18.00 above but unserviceable 25mm x 30mm stopper below the top and supply and fixing the new stopper of suitable size between long rails of size as exisiting complete as directed by Engr-in-Charge.

All as per item No 18.00 above here-in-brfore but Supply and fixing of teak wooden corners of 50'x50'x40' size joining legs with top rails complete all as specified and directed by Engr-in-Charge.

All as per item No 18.00 above here-in-brfore but Replacement of old unserviceable PVC buffers and supply and fixing by screw PVC buffers/rings of size 25mm dia and 20mm height as directed by Engr-in-Charge.

All as per item No. 18.00 preparation of old wooden polished surfaces by rubbing down the old polish from the wooden surfces with sand paper removing pluck marks with wooden scrapper, cleaning of durt and plugging of holes by filling putty by adding colour of required qty to obtained the desired colour, wiping of the polish from other than wooden surfaces with polish thinner and applying french polish of 1st quality as directed by Engr-in-Charge.

Table Dining 8 Person ( FD- 30, 239,269, 273, 376):- Taking out old unserviceable leg of table dining and supply & fixing new leg made of Ist class hard wood (MP Teak) of suitable size including preparation of surface and applying high gloss French polish on newly fixed leg to match the colour with existing polished surface complete all as specified and directed by Engr-in-Charge.

All as per item No 19.00 above but unserviceable long rail of suitable size complete.

All as per item No 19.00 above but unserviceable short rail of suitable size complete.

All as per item No 19.00 above but taking out broken/un-serviceable top of table dining and supply & fixing new teapoy top of suitable size, made of 18 mm thick particle board, exterior grade of suitable size, affixed with 1mm thick teak/any dark shade lamination sheet as approved by Engr-in-Charge using synthetic glue on the top including all around teak wood beading well chamfered joined at corners in mitre joint of size 4 mm x 18 mm fixed with adhesive and headless pins duly given a coat of high gloss French polish complete.

All as per item No 19.00 above here-in-brfore but unserviceable 100mm x 25mm stiffners below the top and supply and fixing the new stiffner of suitable size in dovetailed joint between long rails size complete as directed by Engr-in-Charge.

All as per item No 19.00 above here-in-brfore but unserviceable 25mm x 30mm stopper below the top and supply and fixing the new stopper of suitable size between long rails of size as exisiting complete as directed by Engr-in-Charge.

Supply and fixing of teak wooden corners of 50'x50'x40' size joining legs with top rails complete all as specified and directed by Engr-in-Charge.

Replacement of old unserviceable PVC buffers and supply and fixing by screw PVC buffers/rings of size 25mm dia and 20mm height as directed by Engr-in-Charge.

All as per item No. 19.00 preparation of old wooden polished surfaces by rubbing down the old polish from the wooden surfces with sand paper removing pluck marks with wooden scrapper, cleaning of durt and plugging of holes by filling putty by adding colour of required qty to obtained the desired colour, wiping of the polish from other than wooden surfaces with polish thinner and applying french polish of 1st quality as directed by Engr-in-Charge.

Table 3' X 2' with Drawer ( FD- 283, 224): Replacement of leg of table 3’X2’ with drawer and supply & fixing new leg made of Ist class hard wood (MP Teak) of suitable size including preparation of surface and applying high gloss French polish on newly fixed leg to match the colour with existing polished surface complete all as specified and directed by Engr-in-Charge.

All as per item No 20.00 above but unserviceable long rail complete as existing

All as per item No 20.00 above but unserviceable short rail complete as existing

All as per item No 20.00 above but unserviceable Central stifnner complete

All as per item No 20.00 above but unserviceable short stifnner complete

All as per item No 20.00 above here-in-brfore but taking out broken/un-serviceable top of table 3x2 and supply & fixing new top of suitable size, made of 18 mm thick MDF board, exterior grade of suitable size, affixed with 1mm thick teak/any dark shade lamination sheet as approved by Engr-in-Charge using synthetic glue on the top including all around teak wood beading well chamfered joined at corners in mitre joint of size 4 mm x 18 mm fixed with adhesive and headless pins duly given a coat of high gloss French polish complete.

All as per item No 20.00 above here-in-brfore but Replacement of old unserviceable PVC buffers and supply and fixing by screw PVC buffers/rings of size 25mm dia and 15mm height as directed by Engr-in-Charge.

All as per item No. 20.00 preparation of old wooden polished surfaces by rubbing down the old polish from the wooden surfces with sand paper removing pluck marks with wooden scrapper, cleaning of durt and plugging of holes by filling putty by adding colour of required qty to obtained the desired colour, wiping of the polish from other than wooden surfaces with polish thinner and applying french polish of 1st quality as directed by Engr-in-Charge.

Table Dressing Ladies (Drawing No FD- 32, 251,378): Taking down old unserviceable looking mirror of table dressing ladies and S&F new looking mirror 5 mm thick of suitable size with edges well smothened complete all as specified.

All as per item No 21.00 above but Replacement of unserviceable bottom of drawer made from 6mm plywood BWR of suitable size as per drawing.

All as per item No 21.00 above but Replacement of unserviceable sliding glass shutter with new sliding glass shutter complete with edges smooth round moulded of 5mm thickness of suitable size as per drawing.

All as per item No 21.00 above but Replacement of old and unserviceable bottom side of dressing table with 18mm thick prelaminated particle board exterior grade of suitable size with 4mm x 18mm beading on all size as specified and directed by GE/ Engr-in-Charge.

All as per item No 21.00 above here-in-brfore but Replacement of old and unserviceable front of drawers of dressing table with 18mm thick prelaminated particle board exterior grade of suitable size including knobs as specified and directed by Engr-in-Charge.

All as per item No 21.00 above here-in-brfore but Replacement of old and unserviceable bottom of drawers of dressing table with 6 mm thick BWR plywood as specified and directed by Engr-in-Charge.

All as per item No 21.00 Replacement of old and unserviceable 6mm thick ply at the back of the mirror of dressing table with 6mm thick ply BWR suitable size fixed with screws as specified and directed by Engr-in-Charge.

All all as per item No. 21.00 preparation of old wooden polished surfaces by rubbing down the old polish from the wooden surfces with sand paper removing pluck marks with wooden scrapper, cleaning of durt and plugging of holes by filling putty by adding colour of required qty to obtained the desired colour, wiping of the polish from other than wooden surfaces with polish thinner and applying french polish of 1st quality as directed by Engr-in-Charge.

Table Dressing Gents (Drawing No FD-31, 230, 278, DB- 3980) :- Taking down unservicable looking mirror of table dressing gents and S&F new looking mirror 5mm thick of suitable size complete all as specified.

All as per item No 22.00 above here-in-brfore but taking out un-serviceable side of looking mirror gents(box) and S&F new side of suitable size made of 18 mm thick pre-laminated particle board, exterior grade of suitable size, one side with approved shade complete all as specified.

All as per item No 22.00 above here-in-brfore but taking out un-serviceable top/bottom of looking mirror gents(box) and S&F new side of suitable size made of 18 mm thick pre-laminated particle board, exterior grade of suitable size, one side with approved shade complete all as specified.

All all as per above item No 22.00 but replacement of bottom of drawer of table dressing gents with 6mm thick plywood as directed by Engr-in-Charge.

All all as per item No 22.00 above but Alignment and refixing/Tightening of all parts/joints of table dressing gents.

All as per item No 22.00 Replacement of old and unserviceable bottom of drawers of dressing table with 6 mm thick BWR plywood as specified and directed by Engr-in-Charge.

All as per item No 22.00 Replacement of old and unserviceable 6mm thick ply at the back of the mirror of dressing table with 6mm thick ply BWR suitable size fixed with screws as specified and directed by Engr-in-Charge.

All as per item No. 22.00 preparation of old wooden polished surfaces by rubbing down the old polish from the wooden surfces with sand paper removing pluck marks with wooden scrapper, cleaning of durt and plugging of holes by filling putty by adding colour of required qty to obtained the desired colour, wiping of the polish from other than wooden surfaces with polish thinner and applying french polish of 1st quality as directed by Engr-in-Charge.

Table Bed Side (FD- 28, 276, 210, DB- 3956, 4049) : Taking out old unserviceable side of table bed side and S&F new side of suitable size made of 18 mm thick pre- laminated PVC board, exterior grade, both side with teak shade fixed with 4mm x18mm teak wood beading to the front side and bottom of side/as existing in FD 210. Further fixing two PVC rings at the bottom of each side in FD 276. All as specified and directed by Engr-in-Charge.

All as per item No 23.00 above but taking out old unserviceable bottom and S&F new bottom of suitable size made of 18 mm thick pre- laminated PVC board, exterior grade, both sides with teak shade and bottom shall be covered with 4mm size teak wood beading fixed with panel pins on front sides complete/as exisitng, all as specified and directed by Engr-in-Charge.

All as per item No 23.00 above but unserviceable top made of 18 mm thick pre- laminated PVC board, exterior grade of suitable size, both side with teak shade of suitable size complete all/as existing, as specified and directed by Engr-in-Charge.

All as per item No 23.00 taking out old unserviceable Center shelf of table bed side and supply and fixing new center shelf of suitable size, made out of 12 mm thick pre- laminated particle board, exterior grade, one side with teakwood shade fixed with 4mm thick beading on the front duly polished complete.

All as per item No 23.00 above but aking out old U/S back of table bed side and supply and fixing new back made out of 4 mm thick teak veneer plywood inside of suitable size complete.

All as per item No. 23.00 preparation of old wooden polished surfaces by rubbing down the old polish from the wooden surfces with sand paper removing pluck marks with wooden scrapper, cleaning of durt and plugging of holes by filling putty by adding colour of required qty to obtained the desired colour, wiping of the polish from other than wooden surfaces with polish thinner and applying french polish of 1st quality as directed by Engr-in-Charge.

Table Writing (Drawing No FD- 249, 275 DB 3959):- Taking out old unserviceable leg of table writing and supply & fixing new leg made of Ist class hard wood (MP Teak) of suitable size including preparation of new surfaces and applying high gloss French polish on newly fixed leg to match the colour with existing polished surface complete.

All as per item No. 24.00 above but unserviceable side stiffener complete.

All as per item No. 24.00 above here-in-brfore but unserviceable centre stiffener complete.

All as per item No 24.00 but taking out broken/un-serviceable top of table writing supply & fixing new top of suitable size, made of 18 mm thick MDF board, exterior grade of suitable size, affixe with 1mm thick teak/any dark shade lamination sheet as approved by Engr-in-Charge.

All as per item No 24.00 but Taking out old unserviceable top long rails of table writing and supply & fixing new long rail of suitable size made of Ist class hard wood (MP Teak) complete specified and directed by Engineer-in-Charge..

All as per item No. 24.00 above here-in-brfore but Taking out old unserviceable top short rails of table writing and supply & fixing new long rail of suitable size made of Ist class hard wood (MP Teak) including preparation of new surfaces and applying high gloss French polish on newly fixed leg to match the colour with existing polished surface complete.

All as per item No. 24.00 preparation of old wooden polished surfaces by rubbing down the old polish from the wooden surfces with sand paper removing pluck marks with wooden scrapper, cleaning of durt and plugging of holes by filling putty by adding colour of required qty to obtained the desired colour, wiping of the polish from other than wooden surfaces with polish thinner and applying french polish of 1st quality as directed by Engr-in-Charge.

TABLE COMPUTER (Wooden/Particle board) : Replacement of unserviceable top of computer table and supply and fixing of new top of prelaminated particle board 18mm thick exterior grade to computer table complete all asexisting/specified and directed by Engineer-in-Charge.

All as per item No 25.00 above but replacement of unserviceable side of computer table and supply and fixing of new prelaminated board 18mm thick exterior grade to computer table complete all as existing/specified and directed by Engineer-in-Charge.

All as per item No 25.00 above but replacement of key board stand/tray and supply and fixing of new key board made of prelaminated particle boardexterior grade of 18mm thick complete all as existing/specified and directed by Engineer-in-charge.

All as per item No 25.00 above here-in-before but replacement of Drawer and supply and fixing of complete all including brass lock of 50 mm with duplicate keys as existing/specified and directed by Engineer-in-charge.

All as per item No 25.00 above here-in-before but replacement of Self and supply and fixing of new prelaminated particle board 18mm thick to computer table complete all as existing/specified and directed by Engineer-in-charge.

All as per item No 25.00 above here-in-before but replacement of Bottom and supply and fixing of new prelaminated particle board 18mm thick to computer tablecomplete all as specified and directed by Engineer-in-charge.

All as per item No. 25.00 but replacement of unserviceable Caster wheel of table computer supply and fixing caster wheel of superior quality ISI marked complete all as specified and directed by Engineer-in-Charge.

All as per item No. 25.00 preparation of old wooden polished surfaces by rubbing down the old polish from the wooden surfces with sand paper removing pluck marks with wooden scrapper, cleaning of durt and plugging of holes by filling putty by adding colour of required qty to obtained the desired colour, wiping of the polish from other than wooden surfaces with polish thinner and applying french polish of 1st quality as directed by Engr-in-Charge.

TABLE ONE PIECE ALL PURPOSE: ( FD- 284, 223): Taking out old unserviceable leg of Table one piece all purpose and supply & fixing new leg made of Ist class hard wood (MP Teak) of suitable size including preparation of surface and applying high gloss French polish on newly fixed leg to match the colour with existing polished surface complete all as specified and directed by Engr-in-Charge.

All as per item No 26.00 above but unserviceable long rail complete.

All as per item No 26.00 avove but unserviceable short rail complete.

All as per item No 26.00 above but unserviceable short stiffner/bottom rail complete.

All as per item No 26.00 above but replacement un-serviceable table top of Table one piece for all purpose and Execution & fixing new table top of suitable size, made of 18 mm thick pre-laminated particle board, exterior grade, one side with teak wood shade and balancing white lamination on other side with and including all round teak wood beading of 4 mm x 18 mm size fixed with adhesive and panel pins duly given a coat of high gloss French polish complete all as specified and directed by Engr-in-Charge.

All as per item No 26.00 above but Replacement of old unserviceable PVC buffers and supply and fixing by screw PVC buffers/rings of size 25mm dia and 15mm height as directed by Engr-in-Charge.

All as per item No. 26.00 preparation of old wooden polished surfaces by rubbing down the old polish from the wooden surfces with sand paper removing pluck marks with wooden scrapper, cleaning of durt and plugging of holes by filling putty by adding colour of required qty to obtained the desired colour, wiping of the polish from other than wooden surfaces with polish thinner and applying french polish of 1st quality as directed by Engr-in-Charge.

JYOTI ENTERPRISES

KALSI CONSTRUCTION CO

Harson Enterprises

BALWINDER SINGH AND SONS

M/S NEW SUBBERWAL FURNISHERS

M/S HEAVEN BUILDERS AND ENGINEERS