Repair to motors no.3 (DE & NDE), Rotor imbalance, Pump shaft and sleeves, Bowl assembly , Impeller and guide bearings of deep well turbines of pump set no.3 at jackwell bidragudu in kabini water supply scheme of mysuru city corporation

Repair to motors no.3 (DE & NDE), Rotor imbalance, Pump shaft and sleeves, Bowl assembly , Impeller and guide bearings of deep well turbines of pump set no.3 at jackwell bidragudu in kabini water supply scheme of mysuru city corporation

Disconnecting the cable connections from terminals of 450 HP Vertical Flanged mounted Motor of Vertical Turbine Pumpset without damaging any parts, removing the aligning nut bolts and earthing, Decoup...

Removing Coupling (half) of Oil Lubricated VT Pump alter decoupling motor from Pumpset head, disassembling the Ball Bearing housing, Ratchet assembly, Bearing Distance Piece and Oil seal piece from Tr...

Dismaning of Oil Lubricated VT Pump column assembly by first sassembling the Gland and Gland packing Removing the gland packing Tube Tension plate along with Check mit, lining of Top colorun Pipe and ...

Repair and reconditioning of Suction case and Impeller by grinding, machining, threading etc including replacement of suction case sand collar Impeller seal ring, Impeller holding split ring and Impel...

Repair and reconditioning of Bowl casing by grinding machining, threading ete, complete including cost of material, labour etc., with all lead and lift as directed by Engineer-in-charge.

Repair, reconditioning and Balancing of stainless steel 410T Grade 70 mm OD x 2430 nm in length impeller shaft by removing out, grinding maching threading etc complete as per the directions of Enginee...

Repair, reconditioning and Balancing of stainless steel 4107 Grade 70 mm OD Line shutts by removing out. grinding, machining, threading et complete as per the directions of Engineer-in-charge

Repair and reconditioning of 5. tinm thick shaft enclosing tube (ERW Pipe) by removing out grinding, machining threading etc complete as per the sections of Engineer in-charge

Supply & fixing of suitable Suction case plug (2% NICI, FG- (260) Conforming to 15.210 and suction case sand collar suitable for oil lubricated VT pump including cost of material, labour etc., as dire...

Supply & fixing of suitable size Suction Case Bearing made of Bronze suitable for oil lubricated VI pump conforming to IS 318 Gr LTBZ including cost of cutting machining and threading, etc. complete a...

Supply & fixing of suitable size Circlip. Impeller Collet, & Impeller Collet Nut, Impeller Collet Nut washer suitable for oil lubricated VT pump including cost of material. labour etc., as directed by...

Repair, reconditioning and aligning to proper position Column Pipe Adapter by removing out distorted portion, grinding, machining, threading etc, complete as per the directions of Engineer-in-charge

Supply & fixing of suitable size Bowl Bearing made of Bronze suitable for oil lubricated VT pump conforming to IS 318 Gr LTB2 including cost of cutting, machining and threading, etc., complete as dire...

Supply & fixing of SS 410 grade 70 mm dia shaft coupling and suitable for oil lubricated VT pump conforming to ASTM A276 55410 including cost of cutting machining and threading, etc., complete as dire...

Supply & fixing of suitable size Shaft Bearing made of Bronze suitable for oil lubricated VT pump conforming to IS 318 Gr LTB2 inchiding cost of cutting machining and threading, etc., complete as dire...

Repair, reconditioning and aligning to proper position Tube Tension Plate by removing out distorted portion, grinding, machining, threading ete, complete as per the directions of Engineer-in-charge

Labour charge for Reassenbling of rotating element and all the dismantled parts of 450 HP VT pump set: like re- fixing the of strainer Suction Case, Bowl assembly consisting of impeller and allied acc...

Repair to the cone of thrust bearing and fabricating and fixing of MS Oil Seal contorming to IS:2026 suitable for 450 HP VT pump by making new white metal lining and making proper balancing including ...

Supply of SKF (29326E) of Eqquivalent make spherical roller thrust bearing Suitable for radial load and axial load of Vertical Turbine Pumpset and fixing to thrust bearing assembly conforming to the m...

Supply & fixing of suitable size Bearing Distan Piece of CFG-200 Conforming to IS:200 Suitable for 400 HP Od ubricated VT pump having a 70mm dia head shaft including cost of material, labour, Machine ...

Supply of SKF (6222E) or Equivalent make single ruw groove ball bearing Suitable for Vertical Turbine Pumpset and fixing to thrust bearing embly conforming to the minimum basic rating ile L10 (1000,00...

Cleaning the inside surface of the Bearing Housing providing and fixing of newly supplied cork sheet oil packing in required shape and size fixing the bearing assembly. Ratchet assembly etc with the h...

Supply & fixing of suitable ratchet pins for ratchet assembly of 450 HP Oil Lubricated VT pump including cost of reconditioning of Ratchet assembly by making proper balancing including cost of removin...

Removing the unserviceable oil indicator of pump. Supplying and fixing the same quality and make new oil indicator set with oil tube etc complete, as per direction of lo Engineer-in-Charge

Reassembling of all the dismantled parts of pump set, like re-fixing the bearing housing, pump coupling to its original position, making alignment with motor, fixing coupling bolts, nuts, Providing Te...

Supply and Fixing of Bearing 6224/C3 (Deep Groove Ball Bearing) to 450 HP Vertical Flanged Mounted Induction Motor Non-Driving end, conforming to the minimum basic rating life L10 (10,00,000) in accor...

Supply and Fixing of Bearing 7326 BCBM (Single Row Angular Contact Ball Bearing) to 450 HP Vertical Flanged Mounted Induction Motor Non-Driving end, conforming to the minimum basic rating life L.10 (1...

Supply and Fixing of Bearing 6326/C3 (Deep groove ball bearings) to 450 IP Vertical Flanged Mounted Induction Motor Driving end, conforming to the minimum basic rating life L10 (10,00,000) in accordan...

Dynamic Balancing of rotar: The Job includes mounting the rotar on the "Microprocessor/Computer based Dynamic Balancing Machine" rotar must be double-Plane balanced as per "G 2.5 grade" of ISO 1940-1....

upply and Fixing of RTD 2 No's 3-Wire for Monitoring bearing Temperature of VT Pumpset including cost of wiring, Supplying and installing Temperature scanner suitable for operating at 110 V DC or 230 ...

Supply of Stainless Steel Pressure Gauge, having dual scale reading in PSI and kg/cm2. Filled with glycerin and complete with nipple, stop cock and two way cock for cleaning and necessary length of co...

Supply and fixing of suitable size Guide Spider made of Cast Iron suitable for oil lubricated VT pump conforming to IS 210 Gr FG 200/260 including cost of cutting machining and threading, etc., comple...

Supply and fixing checknut suitable for oil lubricated 450 VT pump having 70mm dia head shaft conforming to Relevant IS/International Standards including cost of cutting, machining and threading, etc....

Overhauling/Servicing of 400HP, 415V, 3-Phase Induction motor of Kirloskar/NGEF make. The work involves isolating the power supply to motor, decoupling the motor and pump, disconnecting the terminatio...