Loading…
Loading…
Tender Value
₹1.0 Cr
EMD Value
₹2.1 L
Closing Date
10 Jul 2026, 11:00 am
Similar tender results from the same govt authority in the past 3 years.
Improvement of wharf of Good shed shunting neck by released PSC sleeper, renovation of toilets and bathroom of existing merchant and labour room and patch repair of damaged platform of goods shed at Tilda.
E-R-T-45-26-27
E-R-T-45-26-27
Open
9 Months
Cuttack, Odisha
₹0
₹2.1 L
15 Jun 2026
15 Jun 2026
26 Jun 2026
Description:- Earth work in excavation as per approved drawings and dumping at embankment
from the centre of gravity of excavation to centre of gravity of spoil heap: the lift to be measured from natural ground level and paid for in layers of 1.5m each, including incidental work, as per specifications-in All kinds of soils
cover dressing to neat dimension and plumbing sides etc. Note : Dressing under this item is payable for the total quantity of excavation in foundation and not partly
surplus earth from foundations including 50m lead and 1.5m lift
Description:- Loading/Unloading G.I. sheets, rails, joists, built up sections, angles, C.I., Ductile
work including lead upto 50m and stacking properly into/from trucks, trailors or wagons. Individual length upto 3.5 M
Description:- Leading miscellaneous materials such as iron work, rails, fitting & fastenings, pipes,
(each individual article or bundle being not more than 3.5 metres long in the longest direction) including picking up unloading and stacking, lead upto 50m.
RAIPUR DIVISION-ENGINEERING/SOUTH EAST CENTRAL RLY
wooden logs, stones over pitching stone size, RCC/PCC beams / slabs etc and all similar articles (each individual article or bundle being not more than 3.5 metres long in the longest direction) including all loading, unloading and stacking, lead over 500m and upto 10 km. Note : Lead under this item is payable when the same exceeds 500m.
over item no. 021150.
Description:- Hiring of JCB Machine (in good working condition) for leveling and dressing ground /
JCB machine, machine operator, fuel, etc. The contractor shall arrange road permit for vehicle for all the States of operation, as per instructions of engineer in-charge and vehicle shall not be more than three years old. Payment shall be made for actual working hours at site.
cost of cement, centering and shuttering - All works upto Plinth level : 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 40mm nominal size)
Description:- Providing and laying cement concrete, up to plinth in retaining walls, walls (any
courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets etc, excluding the cost of cement and of shuttering, centering. 1:1.5:3 (1cement : 1.5 sand : 3 graded stone aggregate 20mm nominal size)
cement and of centering and shuttering, as per direction of the Engineer in charge : All works upto Plinth level
for : Foundations, footings, bases of columns
Plast Super-C700 conforming to IS:9103-1999 (to be added @ 1% by weight of cement) for CC & RCC work for controlling water cement ratio and for gaining early strength
Description:- Providing and laying in position M 20 Grade concrete for reinforced concrete structural elements but excluding cost of centering, shuttering, reinforcement and Admixtures in
workability without impairing strength and durability as per direction of Engineer in charge All work upto plinth level, including raft foundation of washable aprons, HS tank, pile cap, footings of FOB, and Platform shelter etc.
Description:- Providing and laying in position M 20 Grade concrete for reinforced concrete
recommended proportion (as per IS:9103) to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer in charge All work in buildings above plinth level upto floor two level.
Foundations, footings, bases of columns, raft foundation of washable aprons, Pile caps, Footings of FOB etc.
Description:- Providing and fixing to IS: 2202 Part-1 marked flush door shutter decorative type,
veneering with vertical grains or cross bands and face veneers on both faces of shutters 35mm thick including ISI marked stainless steel butt hinges with necessary screws
broken panes wherever required Frosted glass panes 4mm thick (10kg /sqm)
satin finish or black stone enamelled with nuts and screws etc. complete of size 300x16 mm
20 RAIPUR DIVISION-ENGINEERING/SOUTH EAST CENTRAL RLY
satin finish or black stone enamelled with nuts and screws etc. complete of size 250x16 mm
21 Description:- Providing and fixing M.S. door handles with necessary screws etc. complete. 125mm
type) with necessary screws etc. complete of size. 200x10
stainless steel screws etc. complete 125x64x2.50mm
less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete 200x10mm
than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete 125mm
(anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete Single rubber stopper
Description:- Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet mitered at corners and joined
reinforced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size complete as per manufacturers specification and direction of Engineer-in-Charge
Description:- Providing and fixing to existing door frames 30mm thick factory made panel PVC door
for styles and 15x15mm for top & bottom rails. M.S .frame shall have a coat of steel primers. M.S. frame covered with 5mm thick heat moulded PVC Foam sheet 'C channel as per drawing given in IR Standard Specifications complete in all respect
in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings, frames, guard bar, ladders, railings, brackets, gates and similar works
Description:- Providing & fixing Precast Chequered tiles conforming to IS:13801:1993, manufactured under mechanical vibration & hydraulic pressing machine in double layer; top layer of
Lanexess colour and bottom layer of 1:3 CC mixed with galvanised steel fibre of approved quality, jointed with neat cement slurry mixed with pigment to match shade of tiles including rubbing and cleaning etc. complete on 20mm thick bed of cement mortar 1:4 of sizes : 300mm x 300mm x 30mm thick
Description:- Providing and fixing Ist quality ceramic tiles conforming to Group B-III (Ceramic Wall
approved by the Engineer-in-Charge in skirting, risers of steps and dado over 12mm thick bed of cement mortar 1:3 (1cement: 3coarse sand) including pointing in white cement mixed with pigment of matching shade complete 300x450 mm and above
Description:- Providing and fixing ceramic tiles conforming to IS:15622 of manufacturers approved
in-Charge in floors and landings over 20mm thick bed of cement mortar 1:4 (1cement: 3coarse sand) including pointing in white cement mixed with pigment of matching shade complete Of Group B-II Clause 5.1 (for abrasion resistance) of IS:15622 (Ceramic Floor Tiles) of size 400x400mm and above
33 RAIPUR DIVISION-ENGINEERING/SOUTH EAST CENTRAL RLY 33 Description:- Providing and fixing ceramic tiles conforming to IS:15622 of manufacturers approved by railway in all colours, shades, design and abrasion resistance class as approved by the Engineer- in-Charge in floors and landings over 20mm thick bed of cement mortar 1:4 (1cement: 3coarse sand) including pointing in white cement mixed with pigment of matching shade complete Of Group B-I-a of IS : 15622 (Vitrified tiles) of size above 400x400mm upto 600x600 mm
Description:- Providing and fixing 18mm thick mirror polished, machine cut for kitchen platforms,
colour and texture laid over 20mm thick base cement mortar 1:4 (1cement: 4coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touchups, including rubbing, curing. etc. complete at all levels Granite Black. Area of slab over 0.5 Sqm but upto 1.0 Sqm
Description:- Providing and fixing at all height false ceiling of 12.5mm thick tapered edge gypsum board conforming to IS: 2095-Part I, including providing and fixing of frame work made of special sections power pressed from M.S. sheet and galvanised with zinc coating of grade 350 as per IS: 277 and consisting of angle cleats of size 25mm x 1.6mm with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with stener 12.5mm dia x 40mm long with 6mm dia bolts to the angle hangers of 25x25x0.55mm of required length and other end of angle hanger being fixed with nut and bolts to G.I. channels 45x15x0.9mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of
perpendicular to G.I. channel with connecting clips made out of 2.64mm dia x 230mm long G.I. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long, - the perimeter of ceiling fixed to wall/ partition with the help of rawl plugs at 450mm centre to centre with 25mm long drive-all screws @ 230mm interval including jointing and fixing to a flush finish of tapered and square edges of the gypsum board with recommended filler, paper tapes, finisher and two coats of primer suitable for gypsum board as per manufacturers specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of the Engineer-in-Charge but excluding the cost of painting.
(1cement: 4 fine sand)
(1cement: 6 fine sand)
38 Description:- Neat cement punning
plastered surface to prepare the surface even and smooth complete
to give an even shade New work (two or more coats of distemper) over and including priming coat with distemper primer
required shade on new work (Two or more coats applied @ 1.43ltr/10 sqm over and including one coat of water proofing cement paint applied @ 2.20 kg/10sqm
colour to give an even shade Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture
Description:- Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal
the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Internal work - exposed on wall 20mm nominal outer dia. Pipes
44 RAIPUR DIVISION-ENGINEERING/SOUTH EAST CENTRAL RLY 44 Description:- Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Internal work - exposed on wall 25mm nominal outer dia. Pipes
Description:- Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing
solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work including cutting chases and making good the walls etc. 20mm nominal outer dia. Pipes
Description:- Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing
solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work including cutting chases and making good the walls etc. 25mm nominal outer dia. Pipes
trenching and refilling etc. External Work 50 mm dia. nominal bore
following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete 50 to 80 mm nominal bore
(screwed end) 25 mm nominal bore
bore, 86mm long. Weighing not less than 88 gms
with Epoxy coated aluminium rod with L.P./H.P.H.D. plastic ball 15mm nominal bore, 105mm long. Weighing not less than 138 gms
and making long screws etc. complete (new work) 50mm nominal bore
Description:- Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm
device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required White Vitreous China Orissa pattern W.C. pan of size 580x440-mm with integral type foot rests
Description:- Providing and fixing white vitreous china pedestal type water closet (European type
device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid
Description:- Providing and fixing wash basin with C.I./ M.S. brackets, 15mm C.P. brass pillar taps,
making good the walls wherever required white vitreous china wash basin size 550x400mm with a pair of 15mm C.P. brass pillar taps
required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing Rectangular shape 453x357mm (outer dimension)
58 RAIPUR DIVISION-ENGINEERING/SOUTH EAST CENTRAL RLY
1:2:4 or richer mix with max. 20 mm coarse aggregate
Description:- Providing and laying water bound macadam with specified stone aggregate, stone
with power road roller of 8 to 10 tonne capacity etc. complete. Base course with 53mm to 22.4mm size including stone screening 11.2mm size
60 Description:- Moorum
61 Description:- Stone chippings / screenings 4.75 mm nominal size
: 4 graded stone aggregate 12.5mm nominal size - excluding the cost of cement and including providing, fixing and removal of forms. 40mm thick S.No. Item Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Code Unit Schedule () B-Execution of all works connected with above work covered under SEC Above/ Railway USSOR-2010 and Vol.I&II of IR unified standard specification (Works & 1555260.00 Below/P materials) (For item No.033063 only). ar
01 Description:- Supply and using cement at worksite : PPC S.No. Item Item Qty Qty Unit Unit Rate Basic Value Escl.(%) Amount Bidding Code Unit Schedule () C-Execution of all works connected with above work covered under SEC Above/ Railway USSOR-2010 and Vol.I&II of IR unified standard specification (Works & 710579.20 Below/P materials) (For item No.045016 only). ar
placing in position and binding all complete. Thermo-Mechanically Treated bars
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
SP-45.pdf
ATTACHMENT
Annex-JRevised.pdf
ATTACHMENT
spl-good.pdf
ATTACHMENT
Annexure-W.pdf
ATTACHMENT
GCC-2022withACS1-10.pdf
ATTACHMENT
GCCACS11.pdf
ATTACHMENT
Download all tender documents and submit your bid