MDU-TN and MEJ-NCJ Doubling Project - Provision of Stainless-Steel FOB at Tutimelur station, Steel FOB & Platform IRS type Shelter at platform no.1, 2 & 3 and Extn. of Passenger FOB to the new PF no.6 at Tirunelveli Junction

A- MDU-TN and MEJ-NCJ Doubling Project - Provision of Stainless-Steel Above/

Earthwork in excavation manually in formation, side drains etc., in the alignment including leading usable cut spoils up to 200M and making formation in filling using the cut spoils, 1 site clearances, setting out and demarcation, disposing off surplus unusable cut spoils as per directions of the Engineer and top and side dressing to provide final formation as per designed profile. The rate shall not include cutting of trees with girth above 30CM and compaction, which shall be paid separately.

B-Item code: 2001 - Earth work in excavation in foundation of bridges to Above/

Provinding and laying M10 cement Concrete in Foundation and flooring using well graded stone aggregate of 40mm nominal size (Note:20mm nominal size permitted without any extra cost)

Providing and laying Design mix control concrete M25/M30/M35/M40 in cast- in-situ 3 RCC works of raft, pile cap, pier, abutment, well staining, RCC well kerb, well cap, pier cap, Jacketing, dirt wall, return wall, wing wall, fly wing wall, retaining wall, approach slab, foot path slab, wearing course, ballast retainers, RCC railing, inspection platform, pedestal, boxes and other miscellaneous works using well graded stone aggregate of 20 MM nominal size. Note: 1.Extra @ 32% of the rate for concreting done for the jacketing work under this item shall be payable and shall deem to include cost of surface preparation, drilling of holes, insertion of dowel bars and grouting of holes etc., required for the work, but exclude cost of dowel bars which shall be payable separately under relevant BOQ item. 2.while using of Decking Sheet for FOB concrete (Slab and steps ) works Rs.2361/cum will be deductable. (Shuttering area 1Cum/ 6.46Sq.m/ Rs 365.6 Sq.m)

Supplying and filling Sand in well/Box Culvert etc of approved quality in layers of 300 MM including watering, ramming.

Providing a n d placing sand/earth filled b a g s in layers for protection of existing embankment.

Rail piling upto 5m depth to protect the existing embankment with rails of any 6 section supplied by the employer. The rate includes driving the rails with monkey hammer or any other means into the soil to the depth as directed by the Engineer, including all tools and plants consumable like fuel, lubricant, labour, other Above/

Supplying TMT Fe-500/Fe-500D* reinforcement steel conforming to IS:1786-1985 including decoiling, straightening, cutting, bending, placing in position, binding with 1MM dia GI 1 binding wire. Note : 1. Reinforcement, shall be measured in length for different diameters used in the works and then paid as per standard weights as per IS 1732. Wastages, overlaps, coupling, welded joints, space bars, chairs and binding wire shall not be measured and cost of these items shall be deemed to be included in the rates. 2. * For seismic zone III, IV & V, only TMT Fe-500D steel shall be used. Above/

E-Bill.No.7B Platform, Passenger amenities and miscellaneous works

Providing FOB, platform shelters, height gauge, columns, beams, trusses and other steel components of miscellaneous works duly launched in position with or without traffic block as directed by Engineer with contractors steel conforming to IS:2062-1999 including fabrication, assembly, erection, launching, riveting/welding, bolting, initial coats of zinc chromate priming conforming to relevant IS specification and three subsequent coats of aluminum paint of approved 1 quality conforming to IS:2339 after final erection on all surfaces complete. Rate is inclusive of supply and fixing of MS holding down bolts for IRS type platform shelters and FOBs with required angles. Note: Payment under this item shall be done on the lines of schedule of stage payments for fabrication & erection of girders as specified in para 8.2 of part (h) 'Steel Works' of Chapter-3 (Bridges) of RVNL Standard Specifications for Material and Works - Vol.-I, Engineering Works. Payment for any stage as indicated in para 8.2, if not required for the works under the item, shall be combined with next stage payment.

Supply and fixing of TATA make 1.00mm BMT,550mpa Galvanised EZY decking 3 sheets duly transporting and fixing by self tapping screws with the fabricated steel section such as MS angles,flats,channels etc. including cutting drilling holes welding etc, complete and as directed by in Line/power block(All labour,materials including FRP sheets,tools and plants and other consumables by contractor) Above/

F-Bill No-7B.1 Structural Steel Work (Supply of steel items) 18195840.00 Below/P

G-Bill No-7B.2 (Supply of other than steel items) 7441268.55 Below/P

Supply of 53 grade cement OPC conforming to IS: 12269 with latest amendments and 1 using the same in the work as per RVNL's approved mix design as per RVNL's prescribed rates of consumption including all lead lift, labour, loading unloading, ascent, descent, crossing of Railway lines(s), royalty, taxes, transport (contractor's own), tools and plant complete. Note: This Qty will be paid for Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately under CPWD-2021.

Item Breakup - D-Bill No: 7A

7005a -- In all kinds of soil Total 15225.00 Dismantling work including removal and disposal of dismantled material outside railway boundary as directed by the Engineer. Dismantled material will be removed by the contractor at his own cost Item- 3 and the same will become the property of the contractor. Note: Measurement will be done before dismantling the structure. S No. Item Description of Item Unit Qty Rate Amount No

Item Code: 7022b - Cement concrete Total 57280.00