SPECIAL REPAIR TO BLDG NO. 2 VEER LINE (JCO MESS) OF 106 MED REGT UNDER GE (WEST) MATHURA

Amount

Taking down Chowkhats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames) complete all as specified and as directed.

Taking down Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each with shutters (without taking off shutters from the frames) complete all as specified and as directed.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F 30 mm thick factory made flush shutter, solid core construction, with block board core and plywood face panel, commercial type on both sides include provision of suitable blocks for taking mortice locks, latche, or other fittings complete all as specified and directed.

S&F Pressed steel frame for doors of size 125 X 60mm frabicated out & 1.25mm thick sheet with one or more rebates including necessary fixing lungs, hinges, lock strike plate, etc, supplied and fixed complete all as specified and as directed.

S&F 2nd claass factory made hard wood 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F 30mm thick factory made solid PVC moulded door shutter with particle board core with 2 mm thick PVC moulded sheet on the front face and 2 mm thick PVC plain colour sheet on back face complete all as specified & directed.

S&F Anodised powder coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos and 3 Nos hinges. In each shutter anodised aluminum snap beading screws etc. complete all as specified and directed.

S&F Anodised powder coated aluminium window and ventilator shutters, side hung type with sash bar and louvered, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws including 01 No peg stay 150 mm long 02 Nos Aluminium hinges 100 mm long, suitable handle etc. In each shutter complete all as specified and directed.

M&L for Aluminium frame (sliding, fixed or casement) powder coated (minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S & F mild steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F for 150mm Aluminium anodised, barrel tower bolts of extruded section and complete all as specified and directed.

S & F for 150 mm size Aluminium handles, cast type, anodised complete all as specified and directed.

S&F 300 mm Aluminium alloy, anodised, sliding door bolts, plate type, sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy and fixed complete all as specified and directed.

S&F 100mm long hasp and staple, aluminium anodised incl bolt to hinges plate fixed with screws complete all as specified and directed.

S&F 140mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in door with screws complete all as specified and directed.

S & F door closer hydraulically regulated designation No. 3 universal type cast iron body suitable for door shutters of 851 to 1000mm in width and fixed complete all as specified and directed.

S&F in repair curtain rod stainless steel, 20 mm dia mild steel, chromium plated with fixing brackets knobs, stops, rollers, and fancy end caps etc. complete all as specified and directed.

S&F 300 mm ordinary mild steel rat tail rod pattern spring incl roller and roller plate complete all as specified and directed

Demolition of Concrete of any description and in any position not otherwise specifically provided complete all as specified and directed.

M&L 75mm thick PCC (1:3:6) type C2 as in plinth protection/footpath using 40mm graded stone aggregate finishing cement concrete surface even & smooth without using extra cement including impression and glass strip or bitumen filling in two panel etc complete all as specified and as directed.

M&L for Cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in coping, benching, bed blocks and the like including weathering, slightly rounded or chamfered angles and throating, as directed incl necessary form work complete all as specified and directed.

M&L PCC 75mm thick, 1:4:8 (Type D2) using 40mm graded crushed stone aggregate as in sub base complete all as specified and directed.

M&L Pre polished rubber moulded Chequered tiles (any colour) 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors including 20mm screed bedding in cement mortar (1:4) complete all as specified and directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

Dismantling floor hearth and wall tiling including cement mortar bedding (but not backing) and rubbish off the premishes complete all as specified and as directed.

Dismantling of stone slab of any description of thickness in floors & aprons etc, laid bedded and pointed in any mortar complete all as specified and directed.

M & L for non skid ceramic (colored), area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. etc , set and jointed in neat cement slurry and pointed in white or colored cement to match incl and over screed bed or beeding layers of mortar 15mm thick in CM 1:4 in floors, complete all as specified and directed.

All as per item No 30 above but as in skirting over 10mm thick backing coat in CM 1:3 complete all as specified and directed.

M & L for non skid ceramic (colored), 7 to 8 mm thick as in floor area of each tile exceeding 0.6 Sqm but n exceeding 0 .11 Sqm , set and jointed in neat cement slurry and pointed in white or colored cement to match incl and over screed bed or beeding layers of mortar 15mm thick in CM 1:4 in floors, complete all as specified and directed.

M&L for Coloured Glazed ceramic tiles in vertical surface 450x350x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match incl 10mm thick plaster in cement mortar (1:3) complete all as specified and directed.

M&Lfor vitrified Ceramic light shade 10mm thick (square/ rectangular) polished , area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed in CM 1:4 complete all as specified and directed.

ditto as per item no 21 above but as in skirting over 10mm thick backing coat in CM 1:3 complete all as specified and directed.

M&L Green Marble of work 18-20 mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) over and incl 20 mm thick screed bed in CM 1:3 cement screed baseincluding pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble complete all as specified and directed.

M&L Machine cut kota stone slab flooring 20-25 mm thick over and incl 20 mm thick screed bed in CM 1:3 cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L Kota stone slab 20-25 mm thick in riser of steps, skirting, dado and pillar laid over and incl 15mm thick backing coat in CM 1:4 cement screed base and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Rounding to edges of stone slabs one edge , such as in steps, cooking platform and other similar situations complete all as specified and directed.

Demolition of Brickwork or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

M&L Brickwork with fly ash modular bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and directed.

M&L Brickwork with fly ash modular bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

Taking down cement plaster on brick or stone walls,ceiling etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed.

M&L rendering 15mm thick on other than fair face of brick work or concrete surface in cement mortar 1:4 mixed with liquid water proofing compound as per manufacturers instructions finished even & smooth (without using extra cement) complete all as specified and as directed. Note :- Liquid WPC shall be measured & paid seprately under relevant item of this BOQ.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surface in cement mortar 1:6 finished even & fair complete all as specified and as directed.

Supply only integral water proofing compound conforming to IS: 2645 - 1975 specification complete all as specified and as directed

M&L for Cement concrete 1:3:6 type C-1 using 20mm graded stone aggregate as in in surface channel and drains complete all as specified and directed.

Extra for forming fair finished drain or channel having inner girth n exc 30cm in cement concrete using extra cement including forms mould mitred stopped ends etc all as specified.

M&L for precast cement concrete 1:2:4 type B1(using 20mm graded stone aggregate) as in manhole cover slab with plain fair faces and set in cement mortar 1:4 complete all as specified and directed.

M&L for 100 mm outet diameter cast iron nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

Dismantling of Single layer Mangalore pattern or similar tiles in roofing complete all as specified and directed.

Dismantling of battens of spacing exc 15 cm for tiles, shingles etc of any size including tilting fillets complete all as specified and directed.

S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of colour as approved by GE and having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ridge/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F for rolled mild steel as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. confirming to Fe 410 -W Gde-E- 250) quality-A complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Dismantling wall and ceiling boards (fiber, pulp, insulation, etc) or insulation board/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed .

M&L for Gl frame work for 605 x 605mm grid size seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediatechannel at 457 mm centre to centre complete all as specified and directed.

M&L for Hangers 6 mm dia. G.I. (upto 6000 mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.

M&L for 4mm thick E board classic, fibre base cement boards, embosed texture, fixed to GI snap grid (size of grid 605mm x 605mm) in ceiling complete all as specified and directed. Note :- The GI snap grid frame work shall be measured & paid for separately.

Fixing only for 4mm thick E board classic, fibre base cement boards, embosed texture, fixed to GI snap grid (size of grid 605mm x 605mm) in ceiling complete all as specified and directed.

S&F hollow corrugated shape PVC Wall Lining consisting of 5mm thick decorative colour PVC sheet inclusive of solvent cement and fixing at site nclusive of fixing at site including L- clips, U- clips, fillets etc as per specifications and drawing complete all as specified and directed.

Taking up or down steel tubing and connections ,15 mm bore complete all as specified and directed.

Taking up or down steel tubing and connections , 20 mm bore complete all as specified and directed.

M&L for Cutting cheses, pinning in, making good to facing where required & pointing in CM 1:3 for conc water tubing and like not exc 10CM girth in brick wall etc complete all as specified and directed.

M&L 15 mm nominal bore Mild steel galvanised water tubing , medium grade , with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

M&L 20 mm nominal bore Mild steel galvanised water tubing , medium grade , with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

S&F for bib taps cast copper alloy with screwed down for iron pipe or brass ferrule and fixed fancy type chromium plated 15 mm bore fixed in repair complete all as specified and directed.

S&Fin repair for stop cock angle type (chromium plated) 15mm bore fancy type cast copper alloy screwed down high pressure with crutch or butterfly handles screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair Tubular towel rail 20mm dia 600mm long between flanges Brass chromium plated complete all as specified and directed.

S&Fin repair for fancy type chromium plated (concealed type) 15mm bore stop cock cast copper alloy screwed down high pressure with long shank and cup screwed both ends for iron pipe fixed in repair complete all as specified and directed.

S & F in repair vitreous china was down, water closet pan (pedestal pattern) , white colour including P or S trap and fixing bolts and connection to flush pipe and drain out going pipe and closet seat cover black or white , closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hanging device complete all as specified and directed.

S& F in repair for Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S & F in repair PVC valve less, symphonic action type, flushing cistern 10 ltr capacity, low level, white/coloured, with inlet, wall valve, float and handle,flush pipe including bracket complete all as specified and directed.

S&F for vitreous china wash hand basin white flat back size 550 x 400 mm excluding taps waste chain and plug but including bracket fixed in repair complete all as specified and directed.

S&F in repair brass chromium plated shower rose of 125mm size complete all as specified and directed.

S&F in repair Shower arm 15mm size 195mm long with bend of 45 degree with flange of CP any colour (minimum weight 40 gms) complete all as specified and directed.

S& F in repair PVC connection best quality with PTMT nuts 450mm long complete all as specified and directed.

S&F in repair for pillar tap 15mm bore cast copper alloy with capstan heads, chromium plated screwed down high pressure fancy type long screwed shank and fly nuts for iron pipe complete all as specified and directed.

S&F in repair for soap dish,any type,fixed to plugs with chromium plated brass screws complete all as specified and directed.

Dismantling old water tanks and removing to store exc 500 & nexc 1000ltrs complete all as specified and directed.

M&L Rotational moulded polythelene water tanks white colour triple layers (cylindrical vertical with closed top) hoisted and fixed in position for 750 ltr Storage capacity all as specified and directed.

S&F 20mm bore ball brass valve high pressure with polythene float and fly nut complete screwed for iron pipe and fixed complete all as specified and directed.

S&F 32mm Waste fittings, brass, chromium plated for basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F 20mm GI nipple suitable for HDPE water tank complete all as specified and directed.

S & F 32mm bore Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 and fittings, fixed to WHB, sink complete all as specified and directed.

M&L for applying two coat of oil bound distemper on walls over a coat of primer including preparation of new plaster surface and applying 1mm thick wall care putty over plastered surface to prepare the surface to prepare the surface even and smooth complete all as specified and directed.

M&L for applying two coat of oil bound distemper on walls over a coat of primer including preparation of old plaster surface after complete removal of existing treatment and applying 1mm thick wall care putty over plastered surface to prepare the surface to prepare the surface even and smooth complete all as specified and directed.

M&L for preparation of old surface of wall and apply two coat of white wash and preparation of surface complete all as specified and directed.

M&L Preparing new wooden surfaces of any description, over 10cm in width or girth, not otherwise described and applying a coat of pink primer and two coats of synthetic enamel paint complete all as specified and directed.

M&L for preparing new plastered surfaces and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and incl priming coat of exterior primer applied @ 0.90 litre/10 Sqm complete all as specified and directed.

M&L for complete removal of old existing treatment and prepare old surfaces and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and incl priming coat of exterior primer applied @ 0.90 litre/10 Sqm complete all as specified and directed.

Supplying and applying, SmartCare Damp Block 2K, two component elastomeric acrylic polymer modified cementitious waterproofing coating, having 80 % elongation as per ASTM D412, resisting 5 bars hydrostatic pressure as per DIN 1048, reduction to rapid chloride shall be 70 as per DIN 1048, crack bridging upto 1.2mm as per ASTM 4548.5. The mixing ratio of the coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing, etc., complete as per manufacturers specifications. Sprinkle sand at 10-15 gram per sqft for better grip with plaster complete all as specified and directed.

M & L providing two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces including preparation of surface of any description exceeding 10 cm width or girth complete all as specified and directed.

M&L for cement concrete 1:3:6 type C0 (using 12.50 mm graded stone aggregate) as in bed blocks for fixing hold fasts and fillling of frames etc. complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for if cement concrete is reinforced (reinforcement cut as required to facilitate demolition) complete all as specified and directed.

M&L for Mild steel TMT bars 10mm dia and over, cut to length bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L RCC (nominal mix) 1:2:4 uing B-0 (12.5 mm graded stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for Formwork to soffits of chajjas and such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

M&L for Formwork to edges of concrete flats, floor slabs, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc. 10cm but n exc. 20cm wide complete all as specified and directed.

Taking down carefully existing points wiring on surface conduit/concealed conduit for light/fan/socket/power/bell from wall & roof along with fitting and fixtures such as switches, sockets, ceiling roses, batten holders, unserviceable light fittings, pieces of wires, gutties, conduit, wooden boards etc and making good the disturbed portion of all floor, ceiling etc complete all as specified and directed.

Material and labour for concealed type point wiring for light/fan with 2.5sq mm FR-LSH PVC insulated, unsheathed, single core multistranded copper conductor cable 1100 volts grade, conforming to IS 694 including 2.5 Sq mm FR-LSH PVC insulated unsheathed copper conductor wire as earth continuity conductor drawn through and including medium grade PVC rigid conduit not less than 20 mm dia with its accessories, galvanized pressed steel terminal boxes of thickness not less than 1.2 mm including 3mm thick laminated sheet cover with brass machine screw, washer, lugs for earthing etc and slot cutting in sheet for fixing switches/ socket/regulators etc complete all as specified and as directed. Note:- (i) On RCC ceiling/column, false ceilling, AC/Metallic Sheet ceilling wiring to be done on surface with conduit/PVC casing capping and its accessories or in existing recessed conduit. (ii)The quoted rate is deemed to be included for the cutting & chasing. (iii) Cutting chases on wall for concealed the conduit shall be made good using CM 1:4 and surface finished to match the existing surface & colour and rate is deemed to be included. (iv) Maximum 08 nos of light/fan/bell points (not more than 2x6A sockets ) will have to be provided in each circuit from main MCB DB .

All as per item No. 103 above herein before but one socket out let 5 pins 5 Amp on the independent board complete all as specified and directed.

All as per item 103 above herein before but one socket out let 5 pins 5 Amp on the same board but with other switches complete all as specified and directed.

Material and labour for concealed type point wiring for light/fan with 2.5 sq mm FR-LSH PVC insulated, unsheathed, single core multistranded copper conductor cable 1100 volts grade, conforming to IS 694 including 2.5 Sq mm FR-LSH PVC insulated unsheathed copper conductor wire as earth continuity conductor drawn through and including medium grade PVC rigid conduit not less than 20 mm dia with its accessories, galvanized pressed steel terminal boxes of thickness not less than 1.2 mm including 3mm thick laminated sheet cover with brass machine screw, washer, lugs for earthing etc and slot cutting in sheet for fixing switches/ socket/regulators etc complete all as specified and as directed. Note:- (i) On RCC ceiling/column, false ceilling, AC/Metallic Sheet ceilling wiring to be done on surface with conduit/PVC casing capping and its accessories or in existing recessed conduit. (ii)The quoted rate is deemed to be included for the cutting & chasing. (iii) Cutting chases on wall for concealed the conduit shall be made good using CM 1:4 and surface finished to match the existing surface & colour and rate is deemed to be included. (iv) Only 01 power point (Socket-outlets, 16 A) will have to be provided in each circuit from main MCB DB.

Material and labour for concealed type point wiring for light/fan with 4 sq mm FR-LSH PVC insulated, unsheathed, single core multistranded copper conductor cable 1100 volts grade, conforming to IS 694 including 4 Sq mm FR-LSH PVC insulated unsheathed copper conductor wire as earth continuity conductor drawn through and including medium grade PVC rigid conduit not less than 20 mm dia with its accessories, galvanized pressed steel terminal boxes of thickness not less than 1.2 mm including 3mm thick laminated sheet cover with brass machine screw, washer, lugs for earthing etc and slot cutting in sheet for fixing switches/ socket/regulators etc complete all as specified and as directed. Note:- (i) On RCC ceiling/column, false ceilling, AC/Metallic Sheet ceilling wiring to be done on surface with conduit/PVC casing capping and its accessories or in existing recessed conduit. (ii)The quoted rate is deemed to be included for the cutting & chasing. (iii) Cutting chases on wall for concealed the conduit shall be made good using CM 1:4 and surface finished to match the existing surface & colour and rate is deemed to be included. (iv) Maximum 08 nos of light/fan/bell points (not more than 2x6A sockets ) will have to be provided in each circuit from main MCB DB & Only 01 power point (Socket-outlets, 16 A) will have to be provided in each circuit from main MCB DB.

Supply & fixing socket outlet 6 Amps, 5 pin flush type, 230 volts complete all as specified and directed.

Supply & fixing socket out let , 6 pin, 6 and 16 Amps multi purpose 2 in 01 flush type 230 volt having 4 fixing holes complete all as specified and directed.

Supply & fixing switch piano fiush button single pole one way 6 amps 240 volt, ISI marked conforming to IS 3854 complete all as specified and directed.

Supply & fixing switch piano flush button single pole one way 16 amp 240 Volt having 4 fixing holes complete all as specified and directed.

Supply & fixing ceiling rose surface bakelite 3 terminals complete all as specified and directed.

Supply & fixing angle/ batten holder polycorbonate type body complete all as specified and directed.

S & F LED bulb 10/12 W complete all as specified and directed.

Supply & fixing of bulk head fitting with surface mounted, decorative LED bulk head back lit of 10 Watt, IP 66, environmental friendly, ultra modern, energy saving, complete all as specified and directed.

Supply & fixing tube light fitting with surface and wall mounted decorative ultra slim round profile LED lighting fixture, 10 watt LED with extruded polycarbonate, environmental friendly, energy efficient ready to use with polycarbonate diffuser & integrated electronic driver complete all as specified and directed.

Supply & fixing of tube light fitting with surface and wall mounted decorative ultra slim round profile LED lighting fixture, 20 watt LED with extruded polycarbonate, environmental friendly, energy efficient ready to use with polycarbonate diffuser & integrated electronic driver complete all as specified and directed.

Supply & fixing fan regulator electronic, five stepped type suitable to control speed of fan upto 100 watt including making connection complete all as required and as or directed.

Supply and fixing of BLDC ceiling fans, 5 star rated by Bureau of energy with service value of not less than 8.40, (26W±10%) with or without remote, with rated speed 350 Rev per min, air delivery 220 Cum/min complete with blades, down rods, electronic regulator and accessories, 230 volt, 1200 mm sweep, suitable for single phase supply including taking down wornout/burnt fan from ceiling of any height and depositing the same to E/M store yard complete all as specified and directed.

S & F LED luminaire 600mmX 600mm, 36 W, 220 Volts AC surface type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

Supply, testing and commissioning Geyser 25 ltr capacity in 5 Star rating, digital display, feather touch panel, shock safe plug, incoloy glass coated element, feroglass technology, PUF insulation 0.8 Mpa high working pressure, Whirlflow technology, IPX-4 protection suitable for, 50 Hz, AC 240Volt, single phase supply, white blue with overall lenth approx 620 mm with fasteners and SS-304 Connections 600 mm long for hot and cold water complete all as specified and directed.

M & L for sub main wiring with two run of FR-LSH PVC insulated unsheathed flexible copper conductor (Multistrands), single core of size 6.0 Sqmm, 1100 Volts grade and one run of 6.0 Sqmm FR-LSH PVC insulated unsheathed as earth (In Green Colour), flexible copper conductor (Multistrands) for continuous earthing conforming to IS 694 with latest amendments and ISI marked drawing in existing surface/recessed PVC conduit and connecting incoming / outgoing electric connections by providing new required size copper lugs / thimbles and making good to disturbed surface to match with existing surface including taking/drawing out old worn out sub main of any type complete in all respect complete all as specified and directed. Note :- (i) PVC conduit with fitting shall be measured and paid separately. (ii) Three run of single core copper conductor wire flexible (Multistrand) of FR-LSH PVC insulated shall be measured and paid as one unit length.

Supply & fixing of sheet metal distribution board with MCB distribution board triple pole & neutral 415 volts 4 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed.

Supply & fixing in replacement of MCCB - 100 Amp, 415 Volt, 4 pole, 16 KA with adjustable thermal & fixed magnetic protection, Ics = 100% Icu, thermal adjustable - 0.8 to 1 In, in accordance with IS/IEC 60068-2-6 standard including making connection, testing and commissioning in DB complete all as specified and directed.

Supply & fixing of MCB SPN (single pole & neutral) 40 Amps, 240 volt any rating, C series with rupturing capacity 10 KA complete all as specified and directed.

Supply & fixing of sheet metal distribution board with MCB distribution board single pole & neutral 240 volts 8 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed.

Supply & fixing of MCB SPN (single pole & neutral) 6- 32 Amps, 240 volt any rating, C series with rupturing capacity 10 KA complete all as specified and directed.

Supply & fixing of MCB SP (single pole) 6- 32 Amps, 240 volt any rating, C series with rupturing capacity 10 KA complete all as specified and directed.

Supply & fixing of security light with LED street light, 30 Watt, IP - 66, Impact resistance - IK07, colour temp- 5700 K, Class I in pressure die-cast aluminium alloy for housing (heat sink) for effective thermal management, sturdiness, excellent corrosion resistant, separate optical and control gear compartment & top opening for easy maintenance. Polyster powder coated grey after phosphochromate treatmentHigh efficiency long life LED modules with SMD LED package mounted on MCPCB. Lumen efficacy of LED >110 lm/W with PC lens to ensure better uniformity of light distribution. Powered by Built-in, Potted electronic LED driver (SMPS based constant current supply) with lower THD, Output Open Circuit protection, Phase to Phase protection, Over Voltage protection, Surge Voltage protection upto 10 kV with external SPD & other safety tests as per IS 15885 Part-2/ Sec13 alongwith replacement of old arm with single arm bracket OD 58 mm (max) with clamp, nut, bolts etc mounted on wall complete all as specified and directed.

Supply & fix of sheet metal enclosure single pole & neutral with 2 pole and earth metal plug and socket 20A, 240 Volt complete with one single pole MCB of any cap 20/25 Amp, C series complete all as specified and directed.

Supply, laying, jointing and testing of XLPE insulated, sheathed, armoured, heavy duty elect cable with stranded aluminium conductor 1100 volts grade cross section area 16 Sqmm 4 core and laid in trenches / duct / fixing on panels /walls /poles or passing through pipe including connecting with suitable lugs, thimble ,glands, nuts and bolts to exist Panel / DG set and testingcomplete all as directed including taking out the old burnt out cables any size or type complete all as specified and directed.

Excavation in trenches in soft/loose soil not exceeding 1.5 mtr in depth and not exceeding 1.5 mtr wide for laying of cables and getting out complete all as specified and directed.

Removal of excavated surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed.

Returning, filling in including spreading, levelling,watering and well ramming excavated soil in layers not exceeding 25 cm thick each , filling back in trenches after cables have been laid and tested complete all as specified and directed.

M&L for clean dry sand laid in trenches/ducts/ fuel store for bedding and cushioning , including spreading and levelling complete all as specified and directed.

M&L for laying in trenches un-reinforced precast cement concrete cable cover, class LV type 1, flat, size 250mmx150mmx40mm for cable protection laid adjacent to each other length wise perpendicular to the central axis of cable complete all as specified and directed.

Supply & Fixing in replacement of LED Bollard light 10 Watt, Product Code LLSBL-10W-B, IP 65 having step profile placed on top, ideal for architectural outdoor lighting, typically giving off light from the sides suitable to illuminate walkways, steps or pathwys with complete accessories complete all as specified and directed.

Supply & Fixing in replacement of Exhaust fan heavy duty metallic body, of size 300 mm sweep, 900 RPM, AC 240Volt, single phase complete with louver including grouting of nut bolts for fixing of Exhaust Fan complete all as specified and directed.

Supply & Fixing mild steel louvers for exhaust fan of size 300 mm complete all as specified and directed.

Supply & fixing of sheet metal distribution board with MCB distribution board single pole & neutral 240 volts 2 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed.

Material & labour for replacement of 40 mm bore GI pipe light grade laid in trenches or fixed to wall/pole for protection of cable/earthing strip etc complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate 600 mm x 600 mm x6.3 mm thick elecrode and 4 mm dia galvanised iron wire as earthing lead burried directly in ground vertically (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level, the earth plate surrounded by adequate quantity of charcoal dust of minmum qty - 40 Kg and common salt of minmum qty - 40 Kg to a packed thickness of 15 cm on all sides of electrode as specified and connected to GI wire of dia 4 mm as earth lead by means of bolts, nuts, check nuts and washers (including welding) of galvanised iron or steel and connected to main switch board / panel/ test point at the other including necessary earth work in any type of soil, returning filling in and removal of surplus soil, concrete pit in PCC (1:3:6) type C1, precast RCC 1:2:4 type B1 cover slab 54cm x 54cm x 5cm reinforced with 8mm dia bar TMT @150mm centre to centre both ways with one handle for lifting made out 8mm dia MS bar with wire mesh funnel, 20mm GI tubing medium grade for watering and 20mm GI tubing medium grade for protection, test point, testing on completion all as shown in Electrical Plate No 3 of SSR Part-I complete all as specified and directed.

Supply and fixing in replacement of On-Load Changeover Switch( I-O-II) , 415 volts, 50 Hz, four pole of capacity 125 Amps with open execution type and with operating handle including replacement of incoming and outgoing lugs and provision of fixing arrangement on panel with all conection complete after taking down old one all as directed.

Dismantling timber scantlings 40 Sq cm and over in framed work section, in any position complete all as specified and directed.

M&L for preparation of new plastered surface of ceiling and apply three coats of white wash complete all as specified and directed.

S&F of 100 mm size stainless steel hinges complete all as specified and directed.

shyam construction

M/S SHRI RAM INFRASTRUCTURE

ARCHI ENGINEERS