SPECIAL REPAIR REPLACEMENT OF FURNITURE FOR OTM OFFRS AND JCOs OR MD ACCN AGAINST BER CONDEMNED FURNITURE OTHER SANCTIONED WORKS UNDER GE I GOS

Amount

Dressing table ladies with mirror (FD/E6/MAP-II/07): The overall size of the table dressing shall be 1150mm long 380mm wide and 1700mm high and Overall size of the stool shall be 440mm wide. It shall be made up of BWR plywood of grade-A of specified thickness as per drg in lieu of prelaminated particle board.1mm thick laminated sheet shall be pasted on all exterior surface with marine garde adhesive including 6mm thick teak wood beading shall be provided alround the edges of shutters and drawers. Drawers shall be provided with 2x Nos of inch long stainless steel telescopic channels.Drawer and shutter shall be provided with 90mm long recessed metal handles and shutter to be provieded with magnetic catches. Looking mirror shall be 5mm thick electro copper plated fixed over 6mm thick plywood back. 4x Nos heavy duty double wheel castors shall be provided at bass ply. The seat of the stool shall be 75mm thick, 40 density foam cushion covered with best quality tapestry cloth of rate not less than 450 per mtr rest all specification and dimesions are as per drg

Rack Shoe Steel (FD/E6/MAP/02): Overall size shall be 700mm long, 300mm wide and 880mm hig. The legs of the shoe rack shall be of 25mm dia MS pipe of 18 gauge. The five shelves of the rack shall be of 20mm dia MS pipe of 18 gauge welded to legs . The shelves shall have 3mm dia Ms rod 9 Nos in widthwise and 3 Nos in lengthwise welded to 20mm dia shelf frame. All steel surface shall be black powder coating Rest all as shown on drg.

Bed Hard steel Officer (FD/E6/MAP/08 (R)): All as shown on drg and specification Conduit pipe shall be 38mm sq 1.6mm thick for main frame and 19mm sq 1.6mm thick for inner frame for head and foot board 65mmx25mm 1.6mm thick for long rail. 25mm sq 1.6mm thick for stiffener under 12mm plywood shall be used Prelaminated particle board 18mm exterior grade for head and foot board with PVC edging 1mm thick. Finish : All steel surface shall be black powder coating Rest all as shown on drg.

Receiptical Pvc with lead Mack Cello (FD/E6/MAP/13): The receptical shall be of capacity 20ltrs. The body of receptacle PVC shall be made up of thick polymer plastic of thickness not less than 2.5mm provided with swivel lid and iron handles on both sides as shown in drg. Make- Cello, Tupperware or Amko equivalent as shown in drg.

Table conference (FD-287): Dimension : Overall size shall be 2133mm long, 1035mm wide and 760mm high. (a) All wood to be used shall be 1st class hard teak wood .Leg shall be four in numbers and 75mm x40mm in section and 740mm high . Top of leg shall be joined together with top wood rail of 25mm in 100mm section both in short and long sides .Two number wooden stiffener ,equally spaced joining long rails shall be provided of 100x25mm in section with dove talled joint at the ends. Two short stiffener 25mm x50mm in section shall be proved in short sides in joining legs at 100mm from bottom in short sides .A long stiffener of 25mm x50mm in section shall be provided in the middle of the short stiffener joining short stiffeners at 100mm from bottom .Top shall be of 18mm think particle board of commercial face over which 1.5mm thick plastic laminated sheet shall be fixed .The top of shall be free from waves, air bubble etc and fixed as per stander workmanship,5mmx5mm in section groove shall be made in the visible portion of legs on the top of legs. (b) 25mm dia hard rubber/PVC rings shall be fixed to the bottom of all legs with 20mm long screws. Irrespective of what is shown on drawing. Four flat iron angles of 25mmx3mm and 200mm long shall be provided at inner side of four corners and eight numbers flat iron angles of 20mmx3mm 200mm long shall be provided to places joining legs with long and short rails. 4mm thick teak wood edging shall be provided to the edges of top of table. Rest all specifications and dimensions are as per drg Finish : All wooden surface shall be polished in high gloss melamine finish of walnut shade after preparation of surfaces.

Table dressing Gents w/mirror (FD/E6/MAP/16): Overall size shall be 1200mm high, 600mm wide and 100mm high. All wood to be used shall be 1st calss hard teak wood. It shall be made up of BWR plywood of grade-A of specified thikness as per drg in lieu of prelaminated particle board. 1mm thick laminated sheet be pasted on all exterior surface with marine grade adhesive including 6mm thik teak wood beading shall be provided alround the edges of shutters and drawers. Looking mirror shall be 5mm thick fixed inside the teak wood frame made out of 38mmx25mm section. 03x glass shelves of 5mm thickness shall be fixed inside the box with glass holders as shown in drg. Rest all specification and dimensions are as per drg. Preparation of surfaces shall be polish in high gloss melamine polish.

Table center Two Tier (FD-274): Dimension : Overall size shall be 900mm long, 450mm wide and 400mm high with Glass top. a) All wood to be used shall be 1st class hard teak wood. b) Irrespective of what is shown on drg, the top of table shall be 18mm thick BWR plywood of Grade-A with 1mm thick laminated sheet pasted over the ply with marine grade adhesive and all edges of top shall be covered with 6mm thick teak wood beading c) Irrespective of what is shown on drg, one center stiffener of size 20mmx50mm shall also be provided length wise at center in between the side bottom rails. d) 25mm dia hard rubber/PVC rings shall be fixed to the bottom of all legs with 20mm long screws. Rest all specifications and dimensions are as per drg Finish : All wooden surface shall be polished in high gloss melamine finish of walnut shade after preparation of surfaces.

Chair dining PVC (FD/MAP-II/05): All woodwork shall be of 1st class teakwood of special Tectona Grandis conforming to IS-1331:1971 free from knots and cracks shall be used with moisture content permissible as per IS:287:1973. The seat shall be PVC 4mm thick visible like Godrej pattern with 4x10mm thick ribs moulded alongwith seat in single piece screwed with seat frame as shown in drawing. Nylon buffers of appropriate size to bew provided to all the four legs of the chair. All exposed wooden surface shall be smootherned before applying french polish till it attains glossy finish. All joints fixing shall be fixed with bamboo pins and nails shall not be used. Rest all as per drgs or as specified

Locker bed side steel (FD-257): Overall size shall be 760mm long, 600mm wide and 1100mm high. All steel shall be of 1mm thick in front, back , sides, top and bottom. Legs shall be of U shape channel 100 high and 60mm wide ends plugged with 1mm thick mild steel sheet. The legs shall be welded to bottom of almirah. Half of almirah shall have shelves and other half shall have hanging space. A vertical partition shall be provided dividing the width of almirah in to two halves. Hahging portation shall habe 20mm dia chromium plated steel conduct pipe 1.6mm wall thickness with sockets at 55mm from front of shutter of almirah or 80mm top of almirah as directed by Engineer-in-charge. Two shelves, making three equal compartment shall be provided in the other hall of almirah. Two black steel studs fixed in side of shutter shall be made to shape with 1mm thick sheet and 80mm wide, height being that of shutter shall be provided a directed by Engineer-0in-charge. One number safety type, chromium plated brass haps and staple at 75mmx40mmx3mm shall be provided to front shutter. chromium plated handle 100mm long shall be provided to each shutter as shown on drg. Two 50mm long tower bolt shall be provided to one shutter in the inner side as directed by Engineer-in-charge. Front shutters of almirah shall be side hung with 75mm long bult hinges. All steel surface coats to enamal paint over a coat of primer after preparation of surfaces painting shall be done with spray machine.

Table Office Clk Steel (FD-1003): Legs stiffner and top rails of the made out of 25mm MS square tube 1.6mm thick. Table top of 18/19 mm thick pre-laminated particle board melamine finish decorative on side & other side with balancing coat with 4mm PVC beading all-round the table top irrespective of what is shown on drawings. all steel work spray painted with two coats of high gloss synthetic enamel paint over one coat of red oxied zinc chrome primer. Hard rubber shoes/rings to legs. Rest all as per drg.

Chair steel Revolving Executive RK-001 (TP): The overall size of the chair shall not be less than 480mm wide and deep and 550mm high upto seat from ground level. The seat and back shall be made of PU foam of density 45 + 2Kg/m3 upholstered with changeable fabric upholstery covers. The base of chair shall have five prong with penumatic up & down with onee pointlocking mechanism. Handle arm shall be gas-assited injection molded from black polypropylene. Revolving & till should have a full 360 degree revolving machanism with 17deg. Maximum and minimum height of gas lift shall be930mm and 830mm respectively. Color of seat upholster should be post office red, blue or black. All metal parts shall be dry powder coated in thikness more than 50 microns.

Table dining 8 persons (FD/E6/MAP-II/03): The overall size of the table shall be 2100x900x760mm. The table top shall be of 18mm thick pre-laminated particle board exterior grade confroming,exterior qulity as per IS:14587:1998. All woodwork shall be of 1st class teakwood of specie tectona grandies conforming to IS-1331:1971 free from dead knots and moisture content as permissible as per IS-287. 6mm thick TW lipping shall be provided on all the exposed of MDF Duly treated with french polish as specified. Powder coated MS angular plates each of 150mmx30mmx5mm thick shall be screwed to the legs as right angles with long rails and short rails. Hard nylon shoes/buffers shall be provided to each leg bottom.

Sofa set 5 seater with cushion (FD-281): Overall size of three seater shall be 1730mm wide, 725mm deep and 530mm high up to arm level and one seater shall be 670mm wide and 725mm dee and 530mm high up to arm. All wood to be used shall be 1st class hard teak wood. Soda set five seater shall consist of one three seater and two single seats. 10xNos of foam cushion to each set each of size 530m,mx560mmx100mm thick of 40 density coverd with white lining cloth and best quality tapestry cloth of rate not less than 450 per mtr shall be provided with nylon zipper at one edge duly covered under the tapestry cloth flap. PVC hard rubber shoes of 25mm dia shall be provided to bottom of each leg with 20mm long screws.All wooden surface shall be polished with high gloss melamine polish in walnut shade after preparation of surface. Rest all specification and dimensions are as per drg.

Table computer (FD/E6/MAP/03): Dimension : Overall size of Table computer shall be 900x561.2x750mm. a) The whole table top, drawer etc shall be made up of 18mm thick prelaminated partical board BWR ,Exterior Grade, confirming to IS:12825. (b) The frame work shall be made of 25mmx25mmx16 guage thick CRCA box section and supported on 25x50mmx16 guage thick CRCA box section duly covered with PVC cover. (c) The drawers and key board shall be fitted on 1.6mm thick powder quoted telescopic channels. (d) Foot screws shall be provided to the bash of the unit for adjustment of 50mm height. Rest all specifications and dimensions are as per drg Finish : All wooden surface shall be polished in high gloss melamine finish of walnut shade after preparation of surfaces.

Almirah Small Steel with shelves (FD-1032): All as per drg and specification PBI sheet shall 1mm thick for shutter, shelf, side, back, top and bottom. Three way locking device in Godrej Pattern with CP handle 100 lomg be provided brass lock 6 lever with duplicate key of approved make to be fixed leg shall be made of MS Sheet 1.6mm bent to shape as per drg Painting shall be done with spray machine having two coat SE paint over a coat of primer of approced tint Rest all as per deg and specification.

Chair CB Steel With Arms (FD-75(M)): All as shown on drg . Overall size shall be of 535mm wide 580mm deep and 900mm high. Sheet shall be 455mm high from floor. Conduit pipe used for frame shall be 20mm dia steel tubing with wall thikness of 1.6mm. Wood shall be 1st class teak wood cane shall be done with superior qulity 2mm wide 0.4mm thick and perimeter wooven with 3.5mm cane in godrej pattern. Provide MS flate iron 20x5mm two numbers each on the bottom side of sheet and back all iron surface shall be painting with approved color over a coat of primer. Rest all as directed by Engineer-in-Charge.

Chair writing steel (FD/E6/MAP/12): The overall size of the chair shall not be less than 475mm wide and deep and 580mm high at seat from ground level. The seat and back are to be made up of 1.2cm thick hot-pressed plywood, upholstered with fabric upholstery covers and moulded melamine foam. The back foam is to be designed with contoured lumbar support for extra comfort. The foam is to be moded with density =45+/-2 kg/m3 and Hardness= 20+/-2 at 25% compression. Arm rest shall be one piece. All metel parts shall be dry powder coated in thickness more than 50 microns.

Chair Writing (FD-280): All woodwork shall be of 1st class teakwood of specie Tectona Grandis conforming to IS-1331:1971 free from dead knots and moisture content as permissinle as per IS-287. Canning of the chairs shall be of Godrej pattern with 2mm and 3.5mm approved qulity of plastic cane and holes to be covered by 3.5mm wide cane. The canning used for seat has high tensile strength as specified IS:5378 Part II/1990, Cane breaking strength=3000kg/mm2(min) % Elongation at break =25%. TW triangular brackets of size 60x60x25mm thick both ends chamfered shall be screwed on the legs/side rails joint below seat for both rear and front legs ie 4 bracket per chair. PVC rings to be screwed of appropriate size to be provided to all the four legs of the chair.All exposed surfaces shall be french polished.

Table Bed Side MAP (FD/E6/MAP/15R): All as per drg and specification tlimber 1st class hard wood teak Plywood 12mm for side back and drawer and 6mm plywood for bottom of drawer and back side. Legs shall be 18Sqmm condult pipe 1.6mm thick black powder coated paint 18/19mm pre laminated particle board of exterior grade IS-12823 beaded with PVC beading. All exposed partion shall be polished with french polish in high gloss finish. Rest all as per drg.

Table Peg (FD-384): Size shall be 450mm Long, 300mm wide and 380mm High. All wood to be used shall be 1st class hard teak wood. Irrespective of what is shown on drg, the top of the table shall be 18 mm thick BWR plywood of Grade-A with 1mm thick laminated sheet pasted over the ply with marine grade adhesive and all edges of top shall be covered with 6mm thick teak wood beading. Irrespective of what is shown on drg a center stiffener of size 20x40mm shall be provided at center of side bottom rails for extra support. PVC hard rubber shoes of 25mm dia shall also be provided to bottom of each leg with 20mm long screws. Rest all specification and dimensions are as per drg.

Almirah Large Steel with shelves (FD-1031): The over all size of almirah large steel is 1900mm high, 910mm wide and 490mm deep. It shall be made of 1mm thick mild steel sheet/CRCA. All joints shall be riveted and welded throughly. The almirah shall have three shelves, one locker and one drawers with two partitions at upper half with hanging arrangement. The almirah shall have one spring action recessed handle 150mm long with built in locking arrangement fitted to cut out space in one shutter or normal handle 120mm long having three way locking system with proper workmanship. The handle of inside drawer shall be made to S shape by bending the MS sheet of front face of drawer to full length. The handle of inside locker shall be provided with two way bolt locking system having duplicate flat keys. rest all specification and dimensions are as per drg.

Bin Soil Multipurpose (FD/E6/MAP/09): The over all size of the bin linen multipurpose is 1200mm long X 450mm wide X 750mm High. It shall be made of BWR ply of grade-A of thikness as specification in drg in liu of prelaminated particle board. 1mm thick laminated sheet shall be pasted on all exterior surface with marine grade adhesive including 6mm thick teak wood beading shall be provided alround the edges of shutters and drawers. Each drawers shall be provided with 2x Nos of 12 inch long stainless steel telescopic channels. Irrespective of what is shown on drg, the base on bin linen multipurpose shall be of size 1200mm longx 450mm wide x 75mm high, made of 1st class teak wood scantling 30mm thick. The bottom frame shall have four nos of 25mmx25mm stiffernes placed and fitted at equidistant positions inside the base frame. All wood to be used shall be 1st class hard teak wood. The base frame shall be fixed with 85mm long screw fitted from the bottom.Drawer and shutter shall be provided with 100mm long 8mm dia chrome plated handles. Shutter to be provided with magnetic catchers at inside.Rest all specifications and dimensions as per drg.

Chair Easy (FD-229) : Dimension : Overall size shall be 510mm long, 575mm wide and 720mm high. Description : a) All wood to be used shall be 1st class hard teak wood b) PVC hard rubber ring of dia 25mm shall be provided to bottam of each leg with 20mm long screws. c) Caning shall be done in true godrej pattern with virgin plastic cane of 2mm wide, 0.6mm thick half round gola type weighting not less than 6 gms in ten running meters with border woven with 4mm thick cane. Rest all specification and dimensions are as per drg. FINISH: The chair shall be polished in high glass melamine polish in walnut shade after preparation of surface.

Charpoy Steel PBOR/Charpoy with Hard top (FD/E6/MAP/II/01): Specification: Overall size shall be 1980mm long, 900mm wide and 440mm high. a) The frame of charpoy shall be made of MS hollow section piupe of 16 gauge as per specified sizes mentioned in Drg. b) Top of charpoy shall be of 12mm thick BWR ply of grade-A; Place and fix over the and fix over the stiffeners and cleat with 12 Nos of flat head bolt of 6mm dia, 50mm long nylon insert nut and round washer. c) Each leg of charpoy shall be provided with 32mmx32mmx5mm thick MS plate shall be welded at bottom of each leg. Rest all specification and dimensions are as per drg The charpoy shall be dry powder coated in black after preparation of surface.

Table Steel with Drawer 900x600x760 mm (FD-1008): All as shown on drg. Over all size shall be 900mmx600mmx760mm steel frame shall be of 800mmx500x742mm. Four legs shall be of 25mm squre mild steel tube of wall thickness 1.6mm top of legs shall be joined together width 25mm squre mild steel tube of wall thickness 1.6mm top rail on long and short sides. Two short stiffner joining legs in short sides at 100mm front bottom shall be provided in the middle of short stiffener joining short stiffner with 25mm squre mild steel tube of wall thickness 1.6mm at 100mm front bottom of legs. A drawer on left side of table near top stiffner shall be provided of size350mmx130mm and 500mm deep with locking arrangement and recessed handle. mild steel sheet used for drawer shall be of 1mm thick. Top of table shall be of 18mm thick prelaminated particle board with teak weneer shade and PVC edging all round the top of table, irrespective of what is shown and specified on drg. PVC/Hard rubber toes shall be provided two the bottom of leg. All steel surface with two coats of enameld paints over a coat of primer with a spray machine after preparation of steel surface.

Table wdn 600x600x760 mm (FD-293): (a) All wood work shall be of first class hard wood season teak. (b) Irrespective of whatever is indicated in drg of 18/19mm thick veneered particle board with 1.5mm thick laminated shall on one side all as spcifiied in PS-II there-in-before as shown on drg. c) Teak wood edging for table top shall be shown on drg. (d) Hard PVC toe shall be provided to legs (e) All exposed surfaces shall be polished with high glass french polish. (f) Rest all as per drawing or directed by Engineer-in Charge

Table steel without drawer 900x600x760 mm (FD-1007): All as shown on drg. Over all size shall be 900mmx600mmx760mm steel frame shall be of 800mmx500x742mm. Four legs shall be of 25mm squre mild steel tube of wall thickness 1.6mm top of legs shall be joined together width 25mm squre mild steel tube of wall thickness 1.6mm top rail on long and short sides. Two short stiffner joining legs in short sides at 100mm front bottom shall be provided in the middle of short stiffener joining short stiffner with 25mm squre mild steel tube of wall thickness 1.6mm at 100mm front bottom of legs. Top of table shall be of 18mm thick prelaminated particle board with teak weneer shade and PVC edging all round the top of table, irrespective of what is shown and specified on drg. PVC/Hard rubber toes shall be provided two the bottom of leg. All steel surface with two coats of enameld paints over a coat of primer with a spray machine after preparation of steel surface.

ABHIMANYU MAHARANA