Surface Improvement work of NH-34 Kiratpur Bypass Road Ch 88200 to 95200 in District Bijnor in year 2026-27

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads upto 10 Km, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 As per MORT&H Specification Clause 305 Sr. No. 3.18. (Including all taxes, labour cess but excluding cost of GST).

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with mechanical paver finisher in sub- base / base coarse on well prepared surface and compacting with vibratory roller to achieve the desired density complete as per MORTH Specification Clause 406 A Sr. No. 4.14. (Including all taxes, labour cess, Royalty but excluding cost of GST)

Dense Graded Bituminous Macadam (Grading-II) Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 4.50% by weight of total mix and filler, transporting the hot mix to work site, laying with a Mechanical paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRT&H Specfication Clause 505A Sr. No. 5.04 complete in all respects. (Including all taxes, labour cess, Royalty but excluding cost of GST)

Providing and applying Tack Coat with Bitumen VG-10 using pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/ granular surface cleaned with air compressor. As per MORTH Specification Clause 503 Sr. No. 5.02 (Including all taxes, labour cess but excluding cost of GST)

Bituminous Concrete (Grading-II) Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 5.40% of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheled, vibratory and tandem rollers to achieve the desired complaction as per MORTH Specification clause No. 507 B Sr. No. 5.05 (Including all taxes, labour cess, Royalty but excluding cost of GST)

Dismantling reinforced cement concrete or reinforced brick work including stacking of materials as directed by the engineer in charge with in a distance of 60 meter (200 feet). As per S.I. No. 694. (Including all taxes, labour cess but excluding cost of GST)

Brick Masonry Work in Cement Mortar 1:3 in Foundation complete excluding Pointing and Plastering, as per Drawing and Technical Specifications. As per MORTH Specification Clause 1300 Sr. No. 12.05 (Including all taxes, labour cess, Royalty but excluding cost of GST)

Plastering with cement mortar (1:3 ) on brick work in sub-structure as per Technical Specifications complete as per MORTH Specification Clause 1300& 2100 Sr No. 13.03. (Including all taxes, labour cess, Royalty but excluding cost of GST)

Reinforced Cement Concrete in drain/Culvert complete as per Drawing and Technical Specifications. complete as per MORTH Specification Clause 1500,1700 & 2100 Sr. No. 12.08 C (M-20). (Including all taxes, labour cess, Royalty but excluding cost of GST)

Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications complete as per MORTH Specification Clause 1600 Sr. No. 12.42. (Including all taxes, labour cess but excluding cost of GST)