WBIW/EE-I/DCD/e-NIT-41/25-26/1

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement, if any, in ground floor as per relevant IS codes, including supply and carriage of all materials to site in all leads and lifts, curing, vibrating, placing etc. complete. Pakur Variety.

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. For works in foundation, basement and upto roof of ground floor/upto 4 m Tor steel/Mild Steel SAIL/ TATA/RINL

Brick work with 1st class bricks in cement mortar (1:4). In superstructure, ground floor

125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor.

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course,scaffolding/stacking where necessary (ground floor) [Excluding cost of chipping over concrete surface]. With 1:4 cement mortar. 15 mm. thick plaster, For Ground Floor.

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course,scaffolding/stacking where necessary (ground floor) [Excluding cost of chipping over concrete surface]. With 1:4 cement mortar 10 mm. thick plaster,

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course,scaffolding/stacking where necessary (ground floor) [Excluding cost of chipping over concrete surface] With 1:4 cement mortar 20 mm. thick plaster,

Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. NOTE:Cement 0.152 cu.m per100 sq.m.

Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. In Ground Floor: Two Coats.

Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer In Ground floor (Two Coat) Normal Acrylic Emulsion.

Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer's specification) including cleaning and smoothning of surface. Two Coats

Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) 20 mm dia. medium quality.

Supplying, fitting & fixing Cast iron soil pipe only conforming to I.S. 3989/ 2009 and I.S. 1729/2002 with bobbins, nails etc. including making holes in the wall, floor etc. and cutting trenches etc. in any floor through masonry concrete, if necessary, and mending good damages with necessary jointing materials and painting two coats to the exposed surface with approvedpaint complete. (Measurement will be made along the center line of the total pipe line in fitted condition including specials,payment for specials & Painting will however be paid seperately). With valamoid joints including sealing with sand cement morter (4:1) upto quarter depth. 100 mm dia. (internal).

Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals). Sal : Siliguri.

Panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings. In ground floor. (In case of non-supply of single plank, penal rate of reduction of 20% will be made) 35mm thick shutters with 19mm thick panel of size 30 to 45 cm. Sishu, Gamar, Champ,Badam,Bhola, Mogra, Hallak.

Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holderbatsclamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) For Exposed Work PVC Pies. 15 mm dia.

20 mm dia.

25 mm dia.

32 mm dia.

40 mm dia.

UNSKILLED MAZOOR

Supply of Phenyle (1000 ml)as per direction of the E.I.C.

Supply of Herpic (1000 ml)as per direction of the E.I.C.

Supply of Bleaching as per direction of the E.I.C.

Supply of Chun (10 kg.)as perdirection of the E.I.C.

Supply of Sun light dust (500 grm.) as per direction of the E.I.C.

Supply of Room freshener as per direction of the E.I.C. Make: Godrej/Ambi pure

Supply of Bib cock as per direction of the E.I.C.

Supply of A4 page(70 GSM) as per direction of the E.I.C.

Supply of Scale (length 600 mm) as per direction of the E.I.C.

Supply of Legal page(70 GSM) as per direction of the E.I.C.

Supply of Channel file as per direction of the E.I.C.

Supply of Gems Clip as per direction of the E.I.C.

Supply of Attendance Register as per direction of the E.I.C.

Supply of Normal Register as per direction of the E.I.C.

Supply of Pen use & throw (Blue) as per direction of the E.I.C.

Supply of 2 Folder File as per direction of the E.I.C.

Supply of Cartridge HP 12A (Comfort) as per direction of the E.I.C.

Supply of Canon 2010 Ink(BK,C,M,Y) (Comfort)as per direction of the E.I.C.

Please Enable Macros to View BoQ information