Thiruvannamalai City Municipal Corporation Construction of 1.00 LL Capacity OHT at Adaiyur Nearby Abayamanadam in Tiruvannamalai city Municipal Corporation.

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand,silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth with intial lead and lifts and cleaning and levelling the site and refilling etc.,complete - Narrow Foundations - First Depth 2.00m

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand,silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth with intial lead and lifts and cleaning and levelling the site and refilling etc.,complete - Narrow Foundations - Second Depth 2.00 - 3.00m

Sand filling in foundation with clean river sand in layer of 15cm thick well watered rammed to consolidation including cost and conveyance of sand to site incluidng labour charges etc., completete as per standard specificataion

Plain Cement Concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing,and labour charges etc., complete as per standard specification

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation - Plinth Beam

Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. - For plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slabs and beams, etc.

Plain Surfaces 3.00m to 4.30m

Plain Surfaces at 7.30m to 8.30m

Plain Surfaces at 11.30m to 12.30m

Plain Surfaces at 15.30m to 16.30m

Plain surfaces - 19.30 to 20.30m

Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - For plane surfaces such as rectangular or square RCC columns, sunshades, top and bottom slab of RCC boxing, etc.

Square Column upto 3.30m

Square Column 3.30m to 4.30m

Square Column 4.30m to 5.30m

Square Column 5.30m to 6.30m

Square Column 6.30m to 7.30m

Square Column 7.30m to 8.30m

Square Column 8.30m to 9.30m

Square Column 9.30m to 10.30m

Square Column 10.30m to 11.30m

Square Column 11.30m to 12.30m

Square Column 12.30m to 13.30m

Square Column 13.30m to 14.30m

Square Column 14.30m to 15.30m

Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. - For Curved surfaces such as RCC floor slab, roof slab, beams, etc.

Curved Surface 16.30m to 17.30m

Curved Surfaces 17.30m to 18.30

Curved Surfaces 18.30m to 19.30

Curved Surfaces 19.30m to 20.30

Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - For Circular surfaces such as Circular RCC columns etc.

Circular Column upto 3.30m

Circular Column 3.30m to 4.30m

Circular Column 4.30m to 5.30m

Circular Column 5.30m to 6.30m

Circular Column 6.30m to 7.30m

Circular Column 7.30m to 8.30m

Circular Column 8.30m to 9.30m

Circular Column 9.30m to 10.30m

Circular Column 10.30m to 11.30m

Circular Column 11.30m to 12.30m

Circular Column 12.30m to 13.30m

Circular Column 13.30m to 14.30m

Circular Column 14.30m to 15.30m

Providing and laying in position Standardised Concrete Mix M-25 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 350Kg/ cum and maximum water cement ratio of 0.45 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS staandards. (No separate payment will be made by the Department for the excess usage of materials)

For 1.5m Below G.L

For 4.5m Above G.L

For 4.51m to 7.32m Above G.L

For 7.32m to 10.98m Above G.L

For 10.98m to 14.64m from G.L

Providing and laying in position Standardised Concrete Mix M-30 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 400Kg/ cum and maximum water cement ratio of 0.45 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS standards.

For 14.64m to 18.30m from G.L

For 18.30m to 21.96m from G.L

Supply and fabrication of steel required for all RCC items of works involved in the schedule, cost of steel at site fabrication, labour charges for cleaning the rods straightening, cutting, bending, tying grills, including overlapping to the required length whenever necessary and placing the reinforcement in position as as per design given and specified in the drawings, including cost of binding wire, provision of spacer bars, cover blocks and all other incidental charges etc complete as per standard specification

Colour washing two coats in all floors using best Cement Paint and best quality of approved variety and burshes, scaffolding charges etc. complete complying with standard specification.

Supplying and fixing in position C.I.Manhole covers (light or heavy duty) of 600mm X 600mm sizes of best approved quality and as per standard specifications etc.,complete.

Providing Fusion Bonded Epoxy coating not less than 175microns thickness and upto 300 microns to reinforcement of all diameters as per IS 13620/1993 including testing of coating at plant.The cost is inclusive of cost on account of careful handling, PVC coated binding wires, touchup material supplied by coating agency, repair work, loading, unloading and strengthening of bent rods etc., complete as per specification and as directed by the Engineer in charge. (inclusive of all taxes)

For 8mm to 16mm WD-M1543

For 20mm to 32mm WD-M1544

Fabrication, supply, delivery and fixing of outside MS Ladder of 45cm clear wide made out of 50 mm x 50mm x 6mm MS angle for both sides and for steps at 30cm C/C welded jointed etc ., for I staging from GL to 1st level brace (weight 4.5kg/m) IInd and IIIrd staging upto floor slab and IVth staging from floor slab to roof top. Supply, delivery and fixing of 32 mm GI pipes medium for hand rails from I stage to IVth stage. RCC M30 Grade mix for Landing slab 5 nos. at Ground Level- 1No. and above Ground Level - 4Nos. Supply and fixing of 32mm GI pipe medium for hand rails for the Landing slab. Supplying and fixing of MS Base plate of 100mm X 100mm X 6mm thick for fixing Anchore fastener bolt for fixing of hand rails at Landing slab and MS Ladder providing locking arrangements with two coats of approved enamel paint over one coat of red oxide paint as per approved Type Design and as directed by TWAD board officers.As per SOR WD-M1478

Providing and fixing in position of PVC water bar 150mm wide with single bulb for horizontal joints necessary holders fabrication, the rate inclusive of cost of water bar, holders fabrication and fixing in position etc complete as per standard specification and as directed by the Engineer.As per TWAD SOR page No. 158.

Supply and delivery of CI D/F sluice valves with cap along with specials of the 150mm dia in size confirming to IS 14846 / 2000 (PN1) including flanged tail piece and other specials as required, loading, unloading, transportation charges and stacking and jointing including cost of jointing materials etc, complete as per standard Specification.As per SOR WD-M1074

Provision for pipe connection arrangements for inlet, outlet, scour and overflow etc, including cost of pipes, specials, valve, labour charges for lifting, aligning, fixing of DI pipes etc, complete as detailed below. As per SOR WD-M0590

Supply and delivery of CI SLUICE VALVES NON RAISING SPINDLE TYPES TO PRESSURE RATING OF 1.6 PN TO BE USED IN PUMP HOUSES (LONG BODY/ LONG FACE TO FACE) 100mm Conforming to IS including flanged tail piece and other specials as required, loading, unloading, transportation charges and stacking and jointing including cost of jointing materials etc. complete. As per SOR WD-M1122

Plain Cement Concrete 1:1.5:3 (One part of Cement, one and half part of Crushed Sand (M- Sand), three coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification

Sub Total