Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹14.1 LAccepted-AOC 92 R A LINE TOPKHANA BAZAR LUCKNOW CANTT 226002 UP | LUCKNOW | LUCKNOW | UTTAR PRADESH | 226002 | 1 | Accepted-AOC L-1 | |
| 2 | 2₹14.7 L+₹53,284.45 (3.75%)Rejected-Finance | 2 | Rejected-Finance Being other than L-1 | |
| 3 | 3₹15.5 L+₹1.3 L (8.83%)Rejected-Finance | 3 | Rejected-Finance Being other than L-1 | |
| 4 | 4₹16.8 L+₹2.6 L (18.5%)Rejected-Finance WZ 1043 C IIND FLOOR NANGAL RAYA NEW DELHI 110046 | NEW DELHI | NEW DELHI | DELHI | 110046 | 4 | Rejected-Finance Being other than L-1 | |
| 5 | 5₹17.6 L+₹3.4 L (24.1%)Rejected-Finance | 5 | Rejected-Finance Being other than L-1 |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
19 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (EAST) LUCKNOW
GE (EAST) LUCKNOW
COMPREHENSIVE B/R MAINTENANCE/REPAIR AND WELCOME SERVICES FOR OFFRS MD ACCN OF AGE B/R I UNDER GE (EAST) LUCKNOW
2023_MES_606957_1
GE/E/LKO/T-29 of 2023-24
Open Tender
Civil Works
Item Rate
270 days
GE (EAST) LUCKNOW
Please refer Tender documents.
4 documents required · 4 mandatory
₹500
GE (EAST) LUCKNOW
₹50,000
Yes
4 Aug 2023
30 Jun 2023
21 Jul 2023
30 Jun 2023
19 Jul 2023
14 Jul 2023
Amount
Taking Down Chowkats or frames with shutters (without taking off shutters from the frames) area not exc 1.50 sqm each, and removing from site, complete all as specified and directed.
Taking downChowkats or frames with shutters (without taking off shutters from the frame) area exc 1.5 Sqm but not exc 4 Sqm each and removing from site complete all as specified and directed.
Taking down shutters of any description exc 1.00 sqm but not exc 2.00 Sqm each complete all as specified and directed.
M&L plain cement concrete cast in situ 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in copings ,hold fast,back filling of pressed steel frame and other similar work water troughs and the like including weathering, slightly rounded or chamfered angles and throating etc including form work complete all as specified and directed.
S&F hold fasts, supports or stays for rainwater, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe -290 code E-165 complete all as specified and directed.
M&L 2nd class hard wood plain, solid, straight chawkats and frames,wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints, supplied and fixed etc complete all as specified and directed.
S&F 30mm thick, flush shutters solid core construction with block board core and ply wood face panels, commercial type on both sides complete all as specified and directed.
S&F 35 mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.
M&L powder coated aluminum window shutter sliding type using 1.80 mm thick aluminum open three track section having size style & top rails 83 x 44 mm , bottom rails 100 x 44 mm including joining cleats ,glazing clips,rubber packing, aluminium snap beading, screws,with necessary fitting and glazing shall be done by using 5 mm thick plain sheet glass including aluminum grill and wire mesh etc complete all as specified and directed.
S&F factory made solid PVC door frames of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.
S&F Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M S tubes for top & bottom rails. M S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M. S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, and fixing in the frame complete all as specified and directed.
S&F 100 mm size butt hinges, medium weight, stainless steel, complete all as specified and directed.
S&F in repair 100 mm size butt hinges, medium weight, stainless steel, complete all as specified and directed.
S&F in repair 75 mm size butt hinges, medium weight, stainless steel, complete all as specified and directed.
S&F 150mm long aluminium handles cast type, anodised, complete all as specified and directed.
S&F in repair 150mm long aluminium handles cast type, anodised, complete all as specified and directed.
S&F in repair 100mm long aluminium handles cast type, anodised, complete all as specified and directed.
S&F, 200 mm long aluminum anodised barrel tower bolts of extruded section all as specified and directed.
S&F in repair 200 mm long aluminum anodised barrel tower bolts of extruded section all as specified and directed.
S&F in repair 100 mm long aluminum anodised barrel tower bolts of extruded section all as specified and directed.
S&F, MS sliding door bolts 300mm long plate type, stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on stapple plate and fixed all as specified and directed.
S&F of 150 mm long mild steel ordinary rat tail rod pattern springs including roller & roller plate complete all as specified & directed
S&F in repair 150mm long mild steel ordinary rat tail rod pattern springs including roller & roller plate to be fixed as in existing frame complete all as specified & directed
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads (exc 1.5 sqm) complete all as specified and directed.
S&F of 3.00 mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc 0.5 sqm in each pane complete all as specified and directed.
S&F of 3 mm thick figured glass, pin head type and glazing with oil putty in squares not exc 0.5 sqm in each pane, complete all as specified and directed.
S&F of galvansied mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples complete all as specified and directed.
S&F in repair galvansied mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples including taking down from any section and refixing with new wire mesh with tinned tack/by welding/bolting/beading in steel/wooden door/window/ventilator and making good the disturbed portion during execution complete all as specified and directed.
S&F in repair 150mm floor door stopper of aluminium alloy body and tongue,anodised, with hard drawn steel spring complete all as specified and directed
M&L for prepration of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces of any description over 10cm width or girth complete all as specified and directed.
Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for 15mm thick rendering on other than fair faces of brick work or concrete surface in CM 1:4.finished even and fair with mixing of water proofing compound complete all as specified and directed.
M&L for rendering 10mm thick on fair faces of brick work in CM(1:6) surface finished even and smooth without using extra cement, complete all as specified and directed.
M&L for rendering 5mm thick in CM 1:3 as in ceiling ,soffits of slab RCC concrete surface and finish the surface even and smooth without using extra cement complete all as specified and directed.
M&L three coats of white wash on walls including preparation of newly plastered surfaces complete all as specified and directed.
M&L applying two coats of oil bound distemper over a coat of primer on walls including preparation of new plastered surface complete all as specified and directed.
M&L two coats of cement base paint over a coat of primer on new plastered surfaces of walls including preparation of surfaces complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and directed.
M&L for vitrified ceramic tiles 10mm thick (square/rectangular), polished, coloured area of each tile not exc 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and directed.
M&L for vitrified ceramic tiles 10mm thick (square/rectangular), polished, coloured (dark shade as approved), area of each tile not exc 0.36 sqm, on vertical surfaces such as dado, skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:4 complete all as specified and directed.
M&L for non skid ceramic tiles (coloured) 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 sqm but not exc 0.18 sqm as in floors joints free, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6, complete all as specified and directed.
M&L for glazed ceramic coloured tiles (joint free) of size 450x300x7mm thick over 10mm thick plaster in CM 1:4 on vertical surfaces such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
S&F glazed ceramic coloured tiles 7mm thick 600 x 300mm size in vertical surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade. Etc including 10 mm thick rendering in CM 1:4 complete all as specified and directed.
Demolition of stone slabs and tiles of any description or thickness laid, bedded and pointed in any motar etc complete all as specified and directed.
M&L for 18-20 mm thick granite (of any type) machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing including 15 mm thick screed bed or bedding layer in CM (1:6) etc complete all as specified and directed.
M&L rounding to edges of stone slabs, such as steps, cooking platform, and other similar etc complete all as specified and directed.
Cleaning and removing all scale and dirt etc from tank and from mouth of circulating pipe etc of capacity exc 250 not exc 500 ltrs complete all as specified and directed.
Cleaning and removing all scale and dirt etc from tank and from mouth of circulating pipe etc of capacity exc 500 not exc 1000 ltrs complete all as specified and directed.
S&F 500 Ltr capacity Rotational moulded polyethylene water storage tanks three layer ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of existing one complete all as specified and directed.
S&F in repair 20mm dia float valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe with fly nuts complete all as specified and directed.
S&F in repair 20mm gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.
S&F in repair 15mm gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.
Taking down GI tubing 15mm bore of any description including cleaning for refixing or removal to store complete all as specified and directed.
Taking down GI tubing 20 mm bore of any description including cleaning for refixing or removal to store complete all as specified and directed.
M&L GI tubing 15mm dia medium grade galvanized, with all fittings fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
M&L GI tubing 20 mm dia medium grade galvanized, with all fittings fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
Cutting chases pining in brick, concrete walls built in cement mortar or cement lime mortar making good to facings where required and pointing in cement mortor 1:3 to ends or edges of shelves lintels etc and cutting chases for concealed water tubing cutting not exc 10 cm girth complete all as specified and directed.
S&F in repair vitreous china wash hand basin, white, flat back of size 550mm x 400mm with & including a pair of cast iron brackets embedded in PCC 1:3:6 type C-1 blocks of size 10x7.5x15cm, complete all as specified and directed.
S&F in repair 15 mm bore pillar taps, cast copper alloy with capstan heads, chromium plated fancy type screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.
S&F in repair 15mm dia long body bib taps, cast copper alloy chromium plated fancy type with crutch or butterfly handle sc-rewed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. Make:- Jaquar Cat No-MQT-511KN or equivalent as approved by GE
S&F in repair 15mm bore angle valve /stop valve chromium plated fancy type.cast copper alloy screwed down high pressure,crutch or butterfly handle, screwed both end for pipe or for unions, chromium plated with suitable type complete all as specified and directed. Make Jaquar Cat No-Cos-103053 or equivalent as approved by GE
S&F in repair 15mm dia spindle for bib taps,angle valve and pillar taps as required as per ground complete all as specified and directed.
S&F in repair stop valves, 15mm dia, cast copper alloy,CP fancy type with long shank and cup (concealed type) screwd down,high pressure with crutch or butter fly handle,screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.
S&F in repair, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets of capacity 10 litre complete all as specified and directed.
S&F in repair kitchen sink with drainage board made of stainless steel 1mm thick with plug washer and waste including bedding in cement mortar including fixing cantilever bracket and connecting union to pipe overall size 915 X 460 mm bowl size 410 X 330 X 160 mm complete all as specified and directed.
S&F in repair vitreous china wash down water closet pan pedestal pattern, including connection to drain (or outgoing pipe) and PVC seat cover excluding flushing cistern and flush pipe complete all as specified and directed.
S&F in repair plastic water closet seat cover black/white, closed pattern with flat bottom & cover and aluminium anodised hinging device complete all as specified and directed.
S&F in repair 32 mm bore Low density PVC flexible pipe for Wash hand basin/sink etc complete all as specified and directed.
S&F in repair 32mm brass chromium plated bottle trap for wash hand basins with inlet and outlet screwed for pipes or connections including necesssary packing,union and cap complete all as specified and directed.
S&F in repair brass chromium plated shower rose 125 mm size with or without swivel joints including fixing to steel pipe or union complete all as specified and directed
S&F in repair CP shop dish fancy type etc fixed on wall surfaces etc complete all as specified and directed. (Make - Jaquar Cat No- AEC-1133 or equivalent as approved by GE)
S&F in repair CP toilet paper holder fancy type etc fixed on wall surfaces etc complete all as specified and directed. (Make- Jaquar cat no AEC-1151N or equivalent as approved by GE)
S&F in repair CP towel ring etc fixed on wall surfaces etc complete all as specified and directed. (Make- Jaquar cat no AEC-1121N or equivalent as approved by GE)
S&F in repair 15 mm bore 2-way bib cock with flange etc complete all as specified and directed. (Make- Jaquar Cat No- MQT-512ANKN or equivalent as approved by GE))
S&F in repair PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed
S&F in repair 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed
S&F in repair, grating doom 100 mm dia, PTMT complete all as specified and directed
S&F in repair sheet glass shelf assemble consisting of 5.5 mm thick sheet glass shelf 12cm wide with CP bracket gaurd & railing 60cm long complete all as specified and directed
S&F in repair glass corner shelves, fancy type, 6 mm thick 250 mm x 250 mm size and fixed over CP brass bracket etc complete all as specified and directed.
S&F PVC bath cabinet with 4 mm thick looking mirror of overall size 560 x 410 mm fixed on wall etc complete all as specified and directed
S&F in repair brass chromium plated, tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed
S&F in repair stainless steel curtains rods, not less than 25mm dia with heads at both ends knobs and middle support, brackets etc. complete all as specified and directed
Demolition and breaking up drain pipes any type etc complete all as specified and directed
S&F 110 mm Bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed
S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls all as specified and directed.
S&F in repair 110mm bore PVC (SWR) bends any radius complete all as specified and directed
S&F in repair 75mm bore PVC (SWR) bends any radius complete all as specified and directed
S&F in repair health faucet (ABS Body) with 1.00 Mtr long flexible tube including wall hook complete all as specified and directed. Make Jaquar Cat No- ALE-ESS-585 or Equivalent as approved by GE)
S&F in repair 15 mm bore CP wall mixer 3-in-1 system with provison for bath hand shower & overhead shower complete with 115 mm long bend pipe, connecting legs & wall flange (without head & overhead shower) fixed in iron pipes etc complete all as specified and directed. (Make- Jaquar Cat No- Cos-103281 or equivalent as approved by GE)
S&F CP in repair central hole basin mixer with extended casted spout with 450 mm long braided hoses complete fitting as per site requirement etc all as specified and directed. (Make- Jaquar cat No- SQT-516KN or equivalent as approved by GE)
S&F CP in repair kitchen sink mixer with swinging spout (wall mounted model) with connecting legs & wall flanges etc all as specified and directed. (Make- Jaquar cat no - APR-101309N or equivalent as approved by GE)
S&F in repair CP wall mixer with 115 mm long bebd pipes for connection to overshed shower (with bush & piston diverter fitting) with aerator etc all as specified and directed. (Make - Jaquar cat No- MQT-517BKN or equivalent as approved by GE)
M&L for running welding in repair thickness of metal to be welded not exc 6 mm thick including taking down existing steel butt hinges welded or bolted in steel frame complete all as specified and directed
M&L for welding in repair, exc 2.5 cm but not exc 5 cm in lengrh thickness of metal to be welded, not exc 6 mm complete all as specified and directed
S&F in repair 18/19 mm thick prelaminated partical board exterior grade laminated on both side with decorative choice lamination as in cupboard door shutter complete all as specified and directed
M&L 2nd class hard wood, wooden beading, plain fillets, square or rectangular or tringular in section clean sawn sectional area exc 3 sqcm but not exc 6 Sqcm fixed with nail complete all as specified and directed
S&F kitchen PVC cabinet in required sizes at site made out of 18mm thick one side decorative lamination & other side balancing lamination sheet consisting of 18mm thick pvc sheet & provision of shutters made out of 18mm thick one side decorative laminated PVC sheet all required brackets 5.5 screws etc. The panels shall be fabricated using adhesive and screws where ever required. All the edges shall be covered with 2mm thick edge bonding tape or 90 degree edge bent finishing all necessary fitting as per site requitment as per make and specification mentioned as per drawing complete all as specified and directed
S&F continuous piano hinges, mild steel bright finished or electro galvanized with width of flap 30mm when open complete all as specified and directed
S&F 100mm size extruded brass handle, fabricated type polished, ISI marked complete all as specified and directed
S&F magnet catcher for cup board shutter all as specified, ISI Marked complete all as specified and directed
S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified & directed.
M&L for preparation of old surfaces (plastered or unplastered) of walls including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying one coat of white wash, complete all as specified and directed
M&L for preparation of old surfaces (plastered or unplastered) of walls including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying one coat of white wash on ceiling complete all as specified and directed
M&L for preparation of old surfaces (plastered or unplastered) of walls including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying two coat of white wash, complete all as specified and directed
M&L for preparation of old surfaces (plastered or unplastered) of walls including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying one coat of cement base paint, complete, all as specified & as directed.
M&L for preparation of old surfaces (plastered or unplastered) of walls including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying two coat of cement base paint, complete all as specified and directed
M&L for preparation of old surfaces (plastered or unplastered) of walls including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying one coat of oil bound distemper (OBD), complete all as specified and directed
M&L complete removal of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and applying two coats of oil emulison distemper (OBD) of approved shade/tint over a coat of wall care putty on walls etc complete all as specified and directed.
M&L for preparation of old surfaces (plastered or unplastered) of walls/ceiling including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying one coat of acrylic emulsion paint (exterior grade) complete all as specified & directed.
M&L complete removal of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and applying two coats of acrylic emulsion paint (exterior grade) of approved shade/tint over a coat of wall care putty with primer on walls/ceiling etc complete all as specified and directed.
M&L for preparation of old painted surfaces of wood & wood based material of any description over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.
M&L for preparation of old painted surfaces of steel and iron work of any description over 10 cm width or girth and applying one coat of synthetic enamel paint, complete, all as specified and directed
M&L for preparation of old surfaces (plastered or unplastered) of walls/ceiling including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying one coat of plastic paint complete, all as specified & as directed.
S&F in repair cascade type flush kit any make (existing on ground) complete all as specified and directed
S&F Pre-painted galvalume aluminmium zink coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.
Taking out existing aluminium shutter any type and refixing of aluminium shutter fixed with glazed /particle board in panels including all necessary repair and replacing the aluminium snap beading rubber packing, glazing clip etc complete all as specified and directed
S&F in repair 1 meter long anodized aluminum door seal fixed with screw complete all as specified and directed.
M&L for repair to steel window shutter by replacing worn out hinges with box type hinges and worn out portion such as glazing bars fittings and fixture positioning of shutter etc and cleaning the window surrounding and renewal of fittings and fixture (unserviceable) including greasing welding, complete all as specified and directed
M&L for white putty 1 mm thick on wall etc complete all as specified and directed.
M/S RAJ INTERIORS
M/s R.K.Traders
M/S AADI ENTERPRISES
M/s JP Constructions
Mohan Builders
Rakesh Traders
QUALITY CONSTRUCTIONS CO
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .