Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.4 CrAccepted-AOC | ₹15.4 Cr | L1 | Accepted-AOC Being the lowest tenderer (L1) and reasonable |
| 2 | L2₹16.8 CrRejected-Finance | ₹16.8 Cr | L2 | Rejected-Finance Not being the lowest |
| 3 | L3₹19.7 CrRejected-Finance | ₹19.7 Cr | L3 | Rejected-Finance Not being the lowest |
| 4 | L4₹22.0 CrRejected-Finance | ₹22.0 Cr | L4 | Rejected-Finance Not being the lowest |
| 5 | Rejected-Technical NOT SPECIFIED | - | - | Rejected-Technical Not eligible due to two class below |
Tender Value
₹18.5 Cr
EMD Value
₹12.5 L
Closing Date
31 Aug 2020, 6:00 pmClosed
Chief Engineer Navy Mumbai
HQ Chief Engineer Navy Mumbai 26 Assaye Building Colaba Mumbai 400005
Provn of sports infrastructure for gymnastics and boxing at INS Hamla
2019_MES_291308_2
87883
Open Tender
Civil Works
540 days
GE Project Bhandup
As per tender documents
9 documents required · 9 mandatory
₹3,000
GE Project Bhandup
₹12.5 L
Yes
Colaba Mumbai 05
27 Apr 2021
16 Jul 2020
3 Sept 2020
16 Jul 2020
31 Aug 2020
17 Aug 2020
17 Jul 2020 - 21 Jul 2020
22 Jul 2020
Amount
PRE-ENGINEERED BUILDING (PEB) Main Shed (Contractor's design) are not prepriced by MES and prepriced rates indicates 0.0 under column 5 signifies this fact only. AMOUNT TO BE QUOTED BY THE CONTRACTOR.
Design and Construction of Sports complex (Pre-Engineered Building) steel structure with supporting structure, connected accessories and cladding enclosure with suitable supporting structure including panel/partition wall of PCC block masonary in cement mortar and cladding complete all as specified. Excavation and Earth work, foundation all as per Mfg design etc complete with permanent specifications, complete all as shown on Arch drawings and as specified and directed in Single Storey construction.
Main Shed :- (i) Excavation in any type of soil /rock. (ii) PCC (1:4:8) type D-2 as in foundation concrete. (iii) Sub Structure: RCC M-30 Design mix and CRS reinforcement in column footings, plinth beams/columns etc. Pre-Construction ATT treatment, RFR, filling under floor etc.
(iv) Super structure: Super structure is to be steel PEB (as shown in drawing ). PCC solid block masonary upto 3.00 mtr height above finished floor level with aluminium window and aluminium grill including painting of structural members (all as specified in PS / schedule of finishes / concern drawing . Colour galvalume sheet wall cladding with over lap of 150 mm above PCC block masonary wall upto 10 mtr height . (v) Roof: Coloured Galvalume sheet roofing. (vi) Flooring: Flooring in main shed and spectator's gallery shall be Ist class hard wood flooring with french polishing of surface (all as specified in PS / schedule of finishes / concern drawing) over 100 mm thick dry lean concrete of M-10 grade all complete as specified but excluding flooring as included in Schedule of finishes drawing. (vii) Plinth Protection of (1:3:6) type C2 over 100 mm thick hard core.
SCH 'A' PART-I "BUILDINGS and STRUCTURES (MISCELLANEOUS)" Total of Schedule 'A' Part-I B/F from Serial Page No. 26
SCH 'A' PART-II "SITE CLEARANCE / EARTHWORK / EXCAVATION" Total of Schedule 'A' Part-II B/F from Serial Page No. 28
SCH 'A' PART-III "INTERNAL WATER SUPPLY" Total of Schedule 'A' Part-III B/F from Serial Page No. 29
SCH 'A' PART-IV "INTERNAL ELECTRIFICATION" Total of Schedule 'A' Part-IV B/F from Serial Page No. 32
SCH 'A' PART-V "ROAD/PATH" Total of Schedule 'A' Part-V B/F from Serial Page No. 34
SCH 'A' PART-VI "HUME PIPE CULVERT" Total of Schedule 'A' Part-VI B/F from Serial Page No. 36
SCH 'A' PART-VII "EXTERNAL WATER SUPPLY " Total of Schedule 'A' Part-VII B/F from Serial Page No. 37
SCH 'A' PART-VIII " EXTERNAL ELECTRIC SUPPLY " Total of Schedule 'A' Part-VIII B/F from Serial Page No.40
SCH 'A' PART-IX "SEWAGE DISPOSAL " Total of Schedule 'A' Part-IX B/F from Serial Page No. 42
SCH 'A' PART-X " AREA DRAINAGE " Total of Schedule 'A' Part-X B/F from Serial Page No.43
SCH 'A' PART-XI "LIGHTENING PROTECTION" Total of Schedule 'A' Part-XI B/F from Serial Page No. 45
SCH 'A' PART-XII "SOLAR WATER HEATER" Total of Schedule 'A' Part-XII B/F from Serial Page No. 46
SCH 'A' PART-XIII "Pile Foundation" Total of Schedule 'A' Part-XIII B/F from Serial Page No. 49
SCH 'A' PART-XIV FALSE CEILING" Total of Schedule 'A' Part-XIV B/F from Serial Page No. 50
Prime Cost Sum of S&F Sauna cabin size 8m×12m×8m
SCH 'A' PART-XV "MISC ITEMS "+
"INTERNAL WATER SUPPLY"
S&F Angular stop cock 15 mm dia, quarter turn Make - Jaquar Model No CQT-23053 or equivalent in Crab Tree/Kohler brand.
S&F for concealed stop cock, Regular body with adjustable wall flange, size 20mm dia, Make - Jaquar Model No CQT-23089 or equivalent in Crab Tree/Kohler brand.
S&F overhead shower 120 mm dia round shape single flow (ABS body chrome plated with gray face plate) with rubit cleaning system Make - Jaquar Model No OHS -1789 or equivalent in Crab Tree/Kohler brand.
S&F two way bib cock 15 mm dia. Make - Jaquar Model No CQT-23041 or equivalent in Crab Tree/Kohler brand.
S&F Health faucet (ABS body) with 01 meter long PVC tube & wall hook. Make - Jaquar Model No ALD-CHR- 583 or equivalent in Crab Tree/Kohler brand.
S&F PVC connections 600 mm long braided hose with M10X1 Nipple, 15 mm nut , O-Ring & Rubber washer Make - Jaquar Model No ALD-803AB or equivalent in Crab Tree/Kohler brand.
S&F Bib tap 15 mm dia. Make - Jaquar or equivalent.
"INTERNAL ELECTRIFICATION"
S&F Lamp holder insulated body with back plate and including LED lamp 9 Watt for angle holder all as per specified. Make - Havells/Legrand/Anchor/Leader
S&F modular AC Box (geyser) sheet metal with socket 3 pin, suitable for 20 Amps flush type universal including 20 Amp C series MCB protected. Make - Havells/Legrand/Anchor/Leader
S&F Factory made mini MCB moudular type white capacity 25 Amps including with MCB IP 43 protection 230 Volt all as specified. Make - Anchor/Legrand or equivalent makes specified. (for highbay lights) Make - Havells/Legrand/Anchor/Leader
S&F Dimmer state Box continuously variable voltage transformer 4 Amps capacity 1 phase closed manualy out transformer input voltage 230 V AC and out put voltage 270 V AC Make - Legrand/Schneider/Hager makes specified.
S&F LED tube light fittings including LED tube decorative ultra slim linear fixture with extruded aluminium heat sink environmental friendly Energy efficient ready to use pack, 1x18/20 Watt, 4 feet, surface mounting type extruded PVC, snap on installers and domestic electronic Driver, connector block etc. with all accessories internal prewired & including connecting up with 2 core flexible copper conductor cable with suitable size & suitable for and mounting clamps PVC sqaure box 75x75mm - 2 nos etc.
S&F LED tube light fittings including LED tube decorative ultra slim linear fixture with extruded aluminium heat sink environmental friendly Energy efficient ready to use pack, 2x18/20 Watt, 4 feet, surface mounting type extruded PVC, snap on installers and domestic electronic Driver, connector block etc. with all accessories internal prewired & including connecting up with 2 core flexible copper conductor cable with suitable size & suitable for and mounting clamps PVC sqaure box 75x75mm - 2 nos etc.
S&F LED tube light fittings including LED tube decorative ultra slim linear fixture with extruded aluminium heat sink environmental friendly Energy efficient ready to use pack, 1x10 Watt, 2 feet, surface mounting type extruded PVC, snap on installers and domestic electronic Driver, connector block etc. with all accessories internal prewired & including connecting up with 2 core flexible copper conductor cable with suitable size & suitable for and mounting clamps PVC sqaure box 75x75mm - 2 nos etc.
S&F LED tube light fittings including LED tube decorative ultra slim linear fixture with extruded aluminium heat sink environmental friendly Energy efficient ready to use pack, 1x8/9 Watt ( for mirror light), 2 feet, surface mounting type extruded PVC, snap on installers and domestic electronic Driver, connector block etc. with all accessories internal prewired & including connecting up with 2 core flexible copper conductor cable with suitable size & suitable for and mounting clamps PVC sqaure box 75x75mm - 2 nos etc.
S&F LED Security/Street light fittings 15 Watt including LED lamp wall mounting type extruded metal/aluminium body, and electronic LED driver, etc. with all accessories internal prewired & including connecting up with 2 core flexible copper conductor cable with suitable size etc.
S&F LED high bay 220 Watt fittings including lamp comprises of die cast canopy control gear housing & glass to provide great lighting experience to industrial applications lamp compartment.
S&F LED light fittings including LED decorative 36/34 Watt RECESS mounting type extruded metal/aluminium body, and electronic LED driver, connector block etc. with all accessories internal prewired & including connecting up with 2 core flexible copper conductor cable with suitable size and mounting clamps etc.
Fabricate, supply & fix GI pipe bracket 25 mm dia- 0.9 M long & 2 set of clamps made out of 30 mm x 5 mm MS flat & fixed with anchor bolt suitable for 15W security light fitting
MCCB DB VERTICAL TYPE , suitable for 125 Amps MCCB as incommer, made of sheet steel, powder painted with NEUTRAL bus bar 200 A, neutral link, IP-43-IK09 protection grade, 415Volts TPN with 4 way Double door, L&T CAT NO-DBVTL004DD/ LEGRAND CAT NO-607913/ Schneider/ ABB
MCB SP 63Amps, 240V Volts, 'C' series, breaking capacity 10 KA of rating MAKE :- Legrand/Hegger/Schneider/L&T
MCB SPN 63 Amps, 240 Volts, 'C' series, breaking capacity 10 KA of rating MAKE :- Legrand/Schneider/L&T
MCB SP 6-32 Amps, 'C' series, breaking capacity 10 KA of rating MAKE :- Legrand/Schneider/L&T
MCCB TPN 100 Amps, 415Volts, 25KA, 4 POLE L&T CAT NO-CM91198OOLO/ Legrand CAT NO-420055/ Schneider/ ABB
S&F Exhaust fan heavy duty of size 225/230 mm sweep metal body complete with and louvers connecting up including provision of three core flexible copper wire of size 23/0.0076 from ceiling rose to exhaust fan.
S&F Energy efficient BEE five star rated ceiling fan, 1200 mm sweep and connecting up including provision of three core flexible copper wire of size 23/0076 from ceiling rose to ceiling fan complete in all respect all as specified and directed. (for Tech Building & Adm Building) -Make : Crompton Greaves/Bajaj/Orient
"EXTERNAL WATER SUPPLY "
Construction of valve pit chamber of following sizes with brick masonary, one brick thick wall in cement mortar (1:4) on 100mm thick PCC 1:4:8 type D2 (using 40mm graded aggregate) as in fdn, 15 mm thick cement & plaster rendering internally all around over brick wk & externally upto 15cm below normal GL with 10 SWG thick MS sheet cover incld 40 x 40 x 6mm MS angle frame fixed locking arrangement and painting with one coat of red oxide and two coats of black Bituminous paints of size 1200mm x 1200mm x 900mm.
Cutting existing 100 mm bore CI pipe and intersection of 100 mm x 50 mm dia CI TEE for branch connection including excavation joints and earthwork etc. all as specified.
"EXTERNAL ELECTRIC SUPPLY"
S&F MCCB 3 pole 200 AMP 25 KA on existing panel including modification of 400Amp bus bar and provision of sheet enclosure painting with coats of synthetic enamel paint over a coat of red oxide complete
Supply, install, test and commissioning of LT Panel board (CPRI Approved) Powder coated cubical Out door type with projected globe roof for rain water protection, double door made out of 3.15 mm thick CRCA sheet & suitable size to accomodate all accessories/fittings, compartmentalized in construction to accommodate all accessories. The TPN bus bars shall be insulated with colour coded heat shrinkable sleeve and shall be mounted on DMC/epoxy insulator. The incoming as well as outgoing MCCBs shall have copper extension links of current carrying cap not less than 1.5 times the rated capacity of individual feeders. The extension links shall be supported on DMC / Epoxy insulators having provision for termination of incoming and out going cables. All extension links/interconnection shall be insulated with heat shrinkable colour coaded sleeves. The cubicle shall have a bottom channel of suitable size . A detachable predrilled powder coated gland plate should be used at the bottom for entry of armoured cable of adequate size with glands.The above panel shall be front and back openable lockable /openable by key from both side and shall have louvers and air vent gasket for natural flow of air. Adhesive type gasket shall be used to make panel vermin proof , complete as specified and consisting the following : i) Aluminium bus bar 3 phase 4 wire suitable for 400 amps capacity along with PVC sleevs - 1 Set ii) MCCB 250 Amps, TPN 36 KA (I/C) iii) MCCB 100 Amps, TP25 KA - 1 Nos iv) MCCB 40 Amps, TP 16 KA - 07
v) MCCB TPN 32 Amps 01 Nos vi) LED indicator R Y B vii) Astronomical, Multifunctional digital time swithces CAT NO. 004767 of Legrand or equivalent of L&T CAT NO.- T2 DD T7/MDS/GIC - 1 no viii) Power contactor ML-3, 3 pole rating not less than 40 A with 230 coil make L&T/SEIMENS - 1 no. ix) MCB spn 6 amps-1 no. x) S&F electronic energy trivactor meter, suitable for 3 phase 4 wire CT operated including CT 200 X 5 Amps - 3 nos, temper proof, operated on 240 V AC, three phase, 5 Amps to 10 Amps, base mounting meter, blacklit LCD display with user friendly legend, accuracy class - 0.5, MD recording, revenue protection (in case of wrong electric connection), capability to display & communicate (in case of absence of main supply), with optical port, deficiency metering with either phase / neutral current, IP 51 protection, as per IS13779, Make of meter - L&T model no - ERP300P & CAT NO - WR300BC5200 of L&T or equivalent of secure - 1 no.
S&F LED post -Top 40 W light fittings including LED lamp complete in street light poles/Buildings with and including drivers, pressure die cast aluminium housing, prewired complete including GI steel tubing medium grade 40mm dia and length up to 1.5 meter fittings including MS clamps made of 32mmx5mm flat iron, nuts, bolts.
S&F LED 60 Watts street light fittings including LED lamp complete in street light poles/Buildings with and including drivers, pressure die cast aluminium housing, prewired complete. Including GI steel tubing medium grade 40mm dia and length up to 1.5 meter fittings including MS clamps made of 32mmx5mm flat iron, nuts, bolts.
S&F PVC junction box IP 65 Protection of size 0.200 x 0.250 x 0.115 complete with 1 Nos of MCB SP 2.5 Amps & 4 way industrial connector including Clamp made out of MS flat 30X5 mm, connection from junction box to street light fitting with three single core PVC insulated , PVC sheathed wire 2.5 Sqmm copper & PVC conduit 20 mm dia. Make of Box- Spels Berg/Rittal/Hensel CAT NO K8350
S&F cable route indicator made of round CI disc embossed LT Cable, of size 16cm dia 6mm thick duly revitted with angle of size 50x50x4mm and 60cm long including PCC 1:2:4 B1 using 20mm aggregate 15cm x 15cm x 15cm for grouting the same complete all as specified.
Cutting of hardstanding/Road for laying of pipe line/cable and making good surfaces after laying of pipe line/cable up to 30cm in depth & width n. exceeding 100cm
Cutting of existing bituminious road up to 250 mm deep and getting out for laying cable protection pipe complete
S&F LT cable route indicator made out of cast iron 10 cm dia duly engraved with letters LT cable 1100 Volts fixed in 20 mm × 20 mm equal angle 60 cm long including provision of PCC block of 20 cm x 20 cm x 20 cm completed
"AIR CIRCULATOR & EXHAUST FANS"
S&F heavy duty, metallic body with metallic blade & brackets, ISI marked exhaust fan, 450 mm sweep with louvers and provision of wire netting of stainless steel wire 1.4mm dia, size of mesh 12mm in square, welding/brazing with stainless steel flat 25mm x 2mm, square in shape to match the size of louvers fixed on wall inner side of louvers to prevent entry of mouse & birds and connecting up including provision of three core flexible copper wire of size 1.5 sqmm from ceiling rose to exhaust fan complete including making hole on wall grouting bolts nuts washers etc. complete all as specified and directed.
S&F AIR CIRCULATOR fan 450 mm sweep high speed, thermally protected motor, heavy duty gear box, 90 degree oscillation for wide coverage conforming to IS-2997-1964, and connecting up including provision of three core flexible copper wire of size 1.5 sqmm from ceiling rose to AIR CIRCULATOR complete including grouting bolts nuts washers etc. all as specified and directed by Engineer-in-Charge. Make- Havells/Crompton Greaves/Bajaj/Orient
"COOLING APPLIANCE"
Supply & install 360 Ltrs frost free Refrigerator having 4 way cooling technology, double door and 5 star rating with high glow finish doors & all accessories such as cooling coil,condenser unit, compressor
S&F erect test and commissioning of storage type water cooler with inbuilt UV purifier of storage capacity 120 Lts and cooling capacity 60 Lts with comfort level water outlet temp 17ºC+ 1ºC and storage tank, front, rear and side panels are made out of stainless steel SS304 of size 660x480x1355mm and 2 Nos of faucets one for cold water and one for normal water with maximum water flow 1.5 LPM including 3 stages of purification (*Sedimentation/Carbon/ UV filtration) with operating temperature 15ºC to 45ºC and working with AC,180-250 Volts supply complete to existing power sockets with 3 Core 1.5sqmm PVC multi standard copper wire complete
"LOOKING MIRROR"
SANKALP INFRACON
NITYA NAND AND SONS CONTRACTORS PVT LTD
SCC Infrastructure Pvt. Ltd
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.06 MB
Download all tender documents and submit your bid