REPAIR MAINT OF INTERNAL WIRING FITTINGS FIXTURE IN AIRMEN MESSES BILLETS SNCO BILLETS OFFRS MESS SINGLE OFFRS QTRS AFOI AND OTM ACCN IN DOMESTIC AREA UNDER GE AF ADM AREA AGRA

Amount

Taking down old unserviceable copper/ aluminium point wiring (light, fan, socket , power socket and bulk head fittings) on surface wiring on wooden batten/ casings & caping complete including fixture and fittings such as switches, ceiling roses, pendents holder, regulators, sockets and defective main switch/ DB/ MCB/ Metal plug etc. by unscrewing carefully from boards etc and making good disturbed surfaces of walls complete all as specfied and directed.

M & L for point wiring for light / fan controlled by one switch with 1.50 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS with and including PVC concealed conduit terminated in new anodise pressed steel sunken box having thickness not less than 2 mm thick for mounting modular of suitable size as required at site including inner and outer frame plate switches and sockets, including 1.5 sqmm single core PVC insulated unsheathed multistanded copper conductor FRLS as earth continuity conductor connected to common earth dolly complete all as specified and diraction. .Note: colour coding is to be maintained .(Ph-Red, N-Black, Half -Yellow, Earth- Green). Make of 1.5 sqmm copper wire: Finolex/ Grandlay/ Polycab

All as per ser item No 2.00 here-in-before but for call bell point.

All as per ser item No 2.00 here-in-before but for 5 pin 5 amps socket outlet independent board.

All as per ser item No 2.00 here-in-before but for 3 pin 5 amps socket outlet on the same board with other switch.

M & L for point wiring with 2.50 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS cable in with and including PVC concealed conduit terminated in new anodise pressed steel sunken box having thickness not less than 2 mm thick for mounting modular of suitable size as required at site including inner and outer frame plate switches and sockets, including 2.5 sqmm single core PVC insulated unsheathed multistanded copper conductor FRLS as earth continuity conductor connected to common earth dolly complete all as specified and direction. Note: colour coding is to be maintained .(Ph-Red, N-Black, Half -Yellow, Earth- Green). Make of 2.5 sqmm copper wire: Finolex/ Grandlay/ Polycab

M & L for point wiring for light/ fan controlled by one switch with 1.5 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS cable in existing PVC concealed conduit providing new 3mm thick ISI marked bakalite laminated sheet fixed with cadmium plated screws and washers for switches and sockets, including 1.5 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS as earth continuity conductor connected to common earth dolly complete all as specified . Note: colour coding shall be maintained .(Ph-Red, N-Black, Half -Yellow, Earth- Green) (Make of 1.5 sqmm copper wire : Finolex/ Grandlay/ Polycab.

All as per ser item No 7.00 here-in-before but for call bell point.

All as per ser item No 7.00 here-in-before but for 5 pin 5 amps socket outlet independent board.

All as per ser item No 7.00 here-in-before but for 3 pin 5 amps socket outlet on the same board with other switch.

M & L for point wiring with 2.5 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS cable in exisiting PVC concealed conduit providing new 3mm thick bakelite laminated sheet ISI marked fixed with cadmium plated screws and washers for mounting of 5 pin 15 amps socket outlet ,including 2.5 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS as earth continuity conductor connected to comman earth dolly complete all as specified and directed. Note: (a) colour coding is to be maintained .(Ph-Red, N-Black,Earth- Green)(Make of 2.5 sqmm copper wire: Finolex/ Grandlay/ Polycab

S & F switch piano flush type one way 5 amps SP 240 volts complete all as specified and directed. Make : Havells Reo/ Legrand/ SSK.

S & F bell push flush type 5 amps SP 240 volts complete all as specified and directed. Make : Havells Reo/Legrand/ SSK.

S & F switch piano flush type one way 15 amps SP 240 volts complete all as specified and directed. Make : Havells Reo/ Legrand/ SSK.

S & F socket outlet 2 in 1, 3 pin 5 amps flush type 240 volts complete all as specified and directed. Make : Havells Reo/ Legrand/ SSK.

S & F socket outlet 2 in 1, 3 pin, 5 and 15 amps flush type 230 volts complete all as specified and directed. Make : Havells Reo/ Legrand/ SSK.

S & F bell AC , 230 V, single pole complete all as specified and directed. Make : Havells Reo/Legrand/ SSK.

S & F switch piano with Modular Switch piano flush type one way 5/6 amps 240 volts complete all as specified and directed. Make :- Crabtree Murano/ Legrand ARTEOR/ Schenieder ZENCELO.

S & F socket with Modular Socket 6 amps 2/3 pin combined complete all as specified and directed. Make:- Crabtree Murano/ Legrand ARTEOR/ Schenieder ZENCELO.

S & F switch piano with Modular Switch piano flush type one way 6/16 Amps 240 volts complete all as specified and directed. Make:- Crabtree Murano/ Legrand ARTEOR/ Schenieder ZENCELO.

S & F socket with Modular Socket 6/16 amps 2/3 pin combined complete all as specified and directed. Make:- Crabtree Murano/ Legrand ARTEOR/ Schenieder ZENCELO.

S & F in replacement of existing unsv fan regulator with Modular fan regulator 120 Watts,2Module, 240 volts, 5 Steps ISI marked complete all as specified and directed. Make:- Crabtree Murano/ Legrand ARTEOR/ Schenieder ZENCELO.

S & F lamp holder/ batton holder/ angle holder insulated body with bakelite back plate suitable for fittings complete all as specified and directed. Make : Havells Reo/ Cona/ SSK.

S & F ceiling rose 65 mm x 50 mm three terminals complete all as specified and directed. Make : Havells Reo/ Cona/ SSK.

S & F ceiling fan regulator electronic socket type 5 stage speed variation ISI marked complete all as specified and directed. Make : Havells Reo/ Legrand/ SSK.

S & F in replacement existing U/S light fitting with energy saving decorative LED batten 20 watt (4 Feet), 230 voltas, energy efficient tube light fitting extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffusre & integrated electronic driver complete with all accessories prewired and includeing making connections with 3 core twisted flexible copper cable of size 23/.0076 from ceilling rose/PVC connector to light fittings. (Note power factor shall not be less thtn 0.95) complete all as specified and directed. Note:- (i) Contractor shall submitt LM 79 & LM 80 test report from OEM owned NABLE accredited laboratory . (ii) Contractor shall conduct the inspection of company rerp. for material genuinety at site at no extra cost. Make:- Philips Cat Ref BN021C LED20S PSU CW GR S2/ Havells Cat Ref ENDURALINEARNEOBS20WLED865SPCWH/ WIPRO Cat Ref LL20-281-XXX-65ALI.

S&F in replacement of existing U/S tube rod with LED tube rod 20 watts (4feet), 230V, 50 Hz ultra bright intergrated polycarbonate body LED tube light with high efficacy suitable for installation in existing tube light fitting complete all as specified and directed. Note:- (i) Contractor shall submitt LM 79 & LM 80 test report from OEM owned NABL accredited laboratory. (ii) Contractor shall conduct the inspection of company rep. for material genuinety at site at no extra cost, Make:- Havells Cat Ref TITANIANEO1213T8SSTL20WLED865SPC/ Wipro Cat Ref. LL13-181-65SESL or equivalent in Philips.

S&F in replacement of old U/S tube light fitting with energy saving decorative batten type 9/10 watt energy efficient tube light fitting (2 Feet) highly durable surfacce mounted LED baten constructed of fire retardent engineering grade extruded plastic and decorative end caps with all accessories prewired and making connection with 3 core copper flexible cable of size 23/.0076 from ceilling rose/PVC connector to light fittings complete all as specified and directed. Note :- (i) Contractor shall submitt LM 79 & LM 80 test report from OEM owned NABL accredited laboratory. (ii) Contractor shall conduct the inspection of company rep. for material genuinety at site at no extra cost. Make:- Philips Cat Ref BN021LED10S-6500 PSU GR S1/ Havells Cat Ref ENDURALINEARNEOBS10WLED865SPCWH/ Wipro Cat Ref LL20-111-XXX-65NE3

S&F in replacement of decorative wall light fitting stainless steel rust free fixture with white glass diffuser suitable for 9 W LED E27 base including 9 Watt LED lamp complete all as specified and directed. Make : Philips Cat No 58070 / Havells Made No FLORETTE WL ILS E27 SS Cat No LHFOAIO1TZI/040

S&F in replacement enery saving new generation LED 9/10 Watts, 6000K, IP-65 bulk head luminarie with opal diffuser complete including connecting electricall using cord flexible3 core copper flexible cable of xize 23/.0076 from ceilling rose/PVC connector to light fittings complete all as specified and directed. Note :- (i) Contractor shall submitt LM 79 & LM 80 test report from OEM owned NABL accredited laboratory. (ii) Contractor shall conduct the inspetion of company rep. for material genuinety at site at no extra cost. Make :- Philips Cat Ref WT140W LED7S CW PSU S1 PC / Havells Cat Ref HEXAFT10WLED857SSYMBOPC/ WIPRO Cat Ref W07-141-XXX-57-XX

S & F in replacement tube light fitting energy saving decorative LED box type 20 Watt(4Feet), 230 volts, 6500K energy efficient tube light fitting extruded aluminium/CRCA housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver complete with all accessories prewired and including making connector to light fittings complete all as specified and directed. Make LED Rod :-Havells cat part No-TITANIANEO1213T8SSTL20WLED865SPC, Make Base Frams Havells Cat part No- REGALBATTENT8UPTO1X22WSSBSWH & Make LED Rod :-Wipro cat part No- LL13-181-65-T5. Make Base Frams Wipro cat part No- WIO921208 or equivalent in Philips

S & F in replacement of FALT 2x2 decorative PMMA recess mounted 28 W panel light that unites a creative design with state of the art LED technology. The concept of protruded decorative achieves a great sense of novelty and flexibility with multiple diffuser designs while offering perfect illumination and greater uniformity this design stands out stunningly among the boring old modular ceiling patterns three core PVC flexible cable etc including taking down of old light fitting complete all as specified and directed- Make-Havells Cat part No - DROPDOWNFLAT2X2PLR28WLED857S/ Wipro Cat No CRCO10R030HP57HE or equivalent in Philips Note:- (i) Contractor shall submitt LM 79 & LM 80 test report from OEM owned NABL accredited laboratory. (ii) Contractor shall conduct the inspection of company rep. for material genuinety at site at no extra cost,

S & F in replacement of octane LED panel 9/10 W Square/ Round silm copmact, auminum dia cast edge lit panel . Recess mounted square fixture with opal diffuser and separate electronic driver three core PVC flexible cable etc including taking down of old light fitting complete all as specified and directed. Make-Havells Cat part No -SPIRITLAMPUNITDLR10WLED827MOD24D or equivalent in Wipro Cat part No- LD98-138-024-40-XX / Philips Note:- (i) Contractor shall submitt LM 79 & LM 80 test report from OEM owned NABL accredited laboratory. (ii) Contractor shall conduct the inspection of company rep. for material genuinety at site at no extra cost,

S & F in replacement of TRIM LED PANEL ROUND 10W aesthetically designed recessed mounted panel in a light weight plastic body and three core PVC flexible cable etc including taking down of old light fitting complete all as specified and directed. Make-Havells Cat part No -LHEBLDP6INIW010 or equivalent in Wipro- Cat part No CRDL11R033HP2765 / Philips Note:- (i) Contractor shall submitt LM 79 & LM 80 test report from OEM owned NABL accredited laboratory. (ii) Contractor shall conduct the inspection of company rep. for material genuinety at site at no extra cost.

Taking down and re-fixing existing ceiling fan after providing new fan clamp, nuts/ bolts, washers and provision of 3 core flexible cable from ceiling rose to fan connector complete all as specified and directed.

S & F in replacement sheet metal enclosure MCB distribution board, double door with IP-43 protection single phase 240 volts 8 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification . Make:- Legrand / Schenieder/ Seimens

S & F in replacement sheet metal enclosure MCB distribution board, double door with IP-43 protection single phase 240 volts 4 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification . Make:- Legrand / Schenieder/ Seimens

S & F in replacement MCB single pole 240 volts, 'C' curv of rating from 6 to 40 amps, with rupturing capacity 10 KA,including providing thimble for out going cables. Make:- Legrand / Schenieder/ Seimens

S & F in replacement MCB SPN 240 volts, 'C' curv of rating from 6 to 40 amps, with rupturing capacity 10 KA, including providing thimble for out going cables. Make:- Legrand / Schenieder/ Seimens

S & F in replacement MCB TPN 240 volts, 'C' curv of rating from 63 amps, with rupturing capacity 10 KA, including providing thimble for out going cables. Make:- Legrand / Schenieder/ Seimens

M & L for replacement of existing U/S submain wiring with two single core PVC insulated flexible copper conductor cable of size 6 sqmm and one single core PVC insulated flexible copper conductor cable green colour of size 6 Sqmm as earth lead in & including concealed PVC conduit light grade cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with existing specification. Make of copper wire: Polycab / Grandlay / Finolex.

M & L for replacement of existing U/S submain wiring with two single core PVC insulated flexible copper conductor cable of size 4 sqmm and one single core PVC insulated flexible copper conductor cable green colour of size 4 Sqmm as earth lead in & including concealed PVC conduit light grade cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with existing specification. Make of copper wire: Polycab / Grandlay / Finolex.

M & L for replacament of existing old U/S earthing complete with galvanised steel earth plate electrode , 600 x600 x 6mm thick burried directly in the ground (earth pit not less than 2.25 mtr deep below ground level)with top edge of the plate not less than 1.5mtr below ground level connected to galvanised iron wire 4mm dia as earth lead by means of bolts, nuts and washers of GI up to test point , GI tubing 15 mm bore medium grade protection pipe , GI watering pipe 20mm bore light grade with funnel and wire mesh , charcoal ,salt and precast PCC 1:2:4 (Nominal mix ) reinforced with XPM having weight not less than 4 kg /sqm including suitable handle of 6mm dia MS bar and angle iron 40x40x3mm frame for cover including earth work in soft/ loose soil , removal of surplus soil to a distance n.exc 50m and connecting , testing on completion all as shown on electric plate No 03 of SSR -2009 Part I complete all as specified and directed.(Note: Excavation and earth work is deemed shall be included in the rates quoted).

S & F in replacement LED smart Lamp 14 watt, 6500 K, 230 volts complete all as specified and directed. Make: Crompton/ Havells/ Phillips.

S & F in replacement LED smart Lamp 7 watt, 6500 K, 230 volts complete all as specified and directed. Make: Crompton/ Havells/ Phillips.

S & F in replacement sheet metal enclosures distribution boards, double door three phase 415 volts 4 ways vertical TPN DB for comprising three phase four wire copper strip bus bar of appropriate capacity complete all as specified and directed and comprising of the following :- (a) ISOLATOR FOUR POLE 63 AMPS AC 415 VOLTS 16 KA=01 NO as incoming and 12 nos. MCB SP 40 Amps, C series. Note :- (i) The DB shall be flush fixed ,and making good the disturbed surface matching with existing specifications shall be part of job at no extra cost. (ii)connection of the Isolator/ MCBs with cable shall be made through appropriate size pin /bottle type thimble -properly crimped. (iii) all the vacant holes of the DB shall be provided with blank plates of appropriate size. (iv) Double continuous earth wire shall be provided for each three phase DB from earthing mains dolly (v) MCB's should have a same make as of DB.

S & F in replacement of MCCB 415 Volts, 50 Hz, 63 Amps 4 pole with rupturing capacity 16 KA including providing thimbles for out-going cables. Make:- Legrand / Schenieder/ Seimens

S & F in replacement of MCCB 415 Volts, 50 Hz, 100 Amps 4 pole with rupturing capacity 16 KA including providing thimbles for out-going cables. Make:- Legrand / Schenieder/ Seimens

M & L in replacement of old u/s service cable size 16 sqmm, twin core 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service complete all as spd and directed. Make:- Plaza/ Havells/Polycab.

Star Enterprises

jmd engineers

Unnati Engineers