A/R and M/O to Govt Non Residential Building at Nalagarh (SH - Providing and laying interlocking concrete block pavement Repair of RCC Chhajja and painting etc.)

Amount

Demolition above G.L. Upto floor two level including disposal of unserviceable materials within 20 metres lead and including cutting the necessary reinforcement and separating out from R.C.C. /R.B. works:- R.C.C. work, including carriage of material in all leads and lifts.

Demolition of brick work above G.L. upto floor two level including stacking of serviceable materials and disposal of un-serviceable materials within 20 metres. lead.In cement mortar, including carriage of material in all leads and lifts.

Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish including centring, shuutering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 Mtrs. and removal of the same for insitu-reinforced concrete & plain concrete work in:Beams, cantilever, girders and lintels.Sides and soffits of beams, beam haunchings, cantilevers,girders, bressumers and lintels exceeding 1 Mtr. in depth in all heights from floor, including carriage of material in all leads and lifts.

Providing and laying cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) reinforced concrete chajjas not exceeding 10cm. thickness upto floor two level including finishing the exposed surfaces with cement mortar 1:3 (1 cement : 3 Sand) to give a smooth and even surface centring/form work and curing complete excluding the cost of reinforcement, including carriage of material in all leads and lifts.

Providing mild steel/Tor steel reinforcement for R.C.C. Work including bending, binding and placing in position complete upto floor two level :Tor Steel, including carriage of material in all leads and lifts.

Brick work using common burnt clay building bricks in foundation and plinth in :-Super-structure above plinth level upto floor two level (First Class Bricks), including carriage of material in all leads and lifts.

15mm Cement plaster in single coat on the rough side of brick/ concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth.Cement Mortar 1:3 (1Cement:3 Sand), including carriage of material in all leads and lifts.

Excavation in foundations, trenches etc., in earth work, lift upto 1.50 Metres stacking the eacavated soil not more than 3 metres clear from the edge of the excavation and then returning the stacked soil in 15cm. layers, when required in to plinths sides of foundations etc., consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed with in a lead of 20 metres, including carriage of material in all leads and lifts.

Providing and laying cement concrete 1:6:12 (1 cement:6 sand : 12 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of centring and shuttering in:Foundation and plinth, including carriage of material in all leads and lifts.

Providing and laying heavy duty precast cement conrete inter locking paver blocks vibro compacted upto M- 50 grade i/c border or kurb block grey or coloured over sub-base of concrete with 25mm thick average thickness of cement mortar 1:4 (1 cement : 4 sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks i/c curing rubbing & polishing complete (Sub base concrete floor to be paid for 60mm thick inter locking blocks, including carriage of material in all leads and lifts.

Providing & fixing cement concrete kerb stone of size 300 x 300 x150 mm of cement concrete M20 grade and as per the HPPWD Specifications, including carriage of material in all leads and lifts.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete, including carriage of material in all leads and lifts.

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete.

Wall painting (two coats) with acrylic emulsion paint of approved brand and manufacture for interior grade on undecorated concrete /stone /plastered wall surfaces to give an even shade including t horoughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for metling the surface

Applying priming coat over new steel & other metal surfaces after & including preparing the surface by thoroughly cleaning oil grease dirt and other foreign matter and scoured with wire brushes fine steel wool scrapers and sand paper complete.With ready mixed priming paint brushing red lead,Red-oxide/zinc oxide chrome, including carriage of material in all leads and lifts..

Painting two costs (excluding priming cost on new steel and other metal surfaces eith enamel paint brushin to give an even shade including cleaning the surface of all dirt,dust and other foregin matters :--Enamel paint other than white, including carriage of material in all leads and lifts.

Providing 10 mm thick plaster of paris (Gypsum unhydrous)ceiling upto a height of 5 metres above floor level over first class kail wood stripes 25mmx6mm with 10 mm gap in between and reinforced with rabbit wire mesh fixed to wooden frame (frame work to be measured and paid for separatly).Flat surfaces, including carriage of material in all leads and lifts.

Providing and fixing plain lining with tongued and groved jointing and screws (frame work and cover fillets to be measured and paid for separately with.2nd class indian teak wood.12mm thick, including carriage of material in all leads and lifts.

RAJ KUMAR