RMO Electrical and Mechanical Services at UTCS Building Vishwas Nagar Delhi (Sub Head- Miscellaneous Electrical Works in different location.)

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Providing and fixing following rating and breaking capacity and pole MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.

250 A,50KA,FPMCCB

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole

Double pole

Supplying and installation following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with two numbers MS/GI Suspenders i/c base of suitable size MS/GI angle, bolts & nuts, painting suspenders, fastener etc as required.

600 mm width X 50 mm depth X 2.0 mm thickness

LED Down lighter (SMD Type) (System lumen efficacy ≥ 105 < 120 lm/Watt ) Supplying, Installation, Testing & Commissioning of LED Recessed/ surface Down lighter (Round/ square/ Rectangular) SMD type of following body material with PMMA and prismatic diffuser and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -50C to 400C, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free (flicker should be below 5%), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K /4000°K / 5700°K / 6500°K (As per ANSI Bin), SDCM (Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be confirming to relevant BIS standards. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing Complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 and <120 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C) Powder coated die cast /Extruded aluminium Body including trim

Providing and fixing pole box of size 250mm X 200mm X 105mm with side openable hinged cover complete with two strip aluminium bus-bar of 100 amps capacity mounted on DMC bus support and 1 no. of SPMCB of 6 amps 'C' series capacity with din rail on the existing street light pole with the help of two nos. MS clamps of suitable size, including making hole to insert the cable and dismantling the worn out MS box etc. complete as required.

Supplying, Installation Testing and Commissioning of 35 Watt LED post top lanterns fittings suitable for operation 220 volt 50 Hz single phase AC supply i/c connection, testing etc as reqd.

Supplying & Laying of one Number Following size. XLPE insulated PVC outer sheathed armoured with galvanized round steel wire or strip cables with standard aluminium conductor suitable for rated voltage of 1.1 KV grade ISI marked confirming to IS 7098 / (Pt.-I)/88 with ammendment No. 1, suitable clamp in following manners. (clamped with 25x3 mm MS Flat Clamb)

3.5 x 50 sq. mm (On Surface)

Supplying installation testing and commissioning of superior quality minimum 6 W/Mtr. LED flexible strip light of IP 65 protection, showing Tri-colour (National Flag) LED strip for fixing on the existing 7/10/12 meters height street light poles (above 2.5 meters of ground level and upto bracket of the pole) wrapping around the pole at spacing of approximately 100 mm complete i/c connection by suitable copper cable & suitable electronic driver and good quality connector with the help of suitable PVC tie/clips by using necessary T&P including connection, testing etc. complete as required. (Note:-Warranty of 2 years for luminaries and drivers including cleaning of the existing poles and dressing of the cables to be done properly before fixing the LED strip). (LED flexible strip should be single length for each pole with showing Tri-colour (National Flag) equal portion.)

Supplying, Installation, Testing & commissioning of LED Based Green (Healthy) Exit Sinages five integration single sided with built in 230 V power supply, NIC battery & its charges with 30 minutes power back up (12" x 6" Display) etc. complete as required.

Rewinding of 7.5 HP capacity 3 phase 415 volt monoblock pumps with superior quality and copper winding wire of suitable gauge including cutting, cleaning the existing burnt/damaged winding, dismantling and reassembling the same after rewinding testing, commissioning i/c Pdg & Replacement of minor/major spares parts of mono block motor and pump such as rotor shaft natural filling, grinding, polishing, balancing, ccaping Kit, O-rong 2 Nos., O seal-2 Nos. upper/lower GM bearing bush, rotor shaft grinding and balancing parts, after repairing works, neck ring, inter bowel bush, stainless, steel sleeve, inter shaft key, assembling of pumps parts after repairing works, painting, testing i/c carrying from site to workshop & back to site complete etc as required i/c less credit on buyback of vurnt copper wires.

Credit for old dismantle materials

Assorted GI Box with Switch Socket

Assorted LED Fitting/Post Top Fitting

Assorted TPMCCB

Assorted LED Signage Board

Assorted LED Strip

Please Enable Macros to View BoQ information