Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.0 LAccepted-AOC | L1 | Accepted-AOC Lowest | |
| 2 | L2₹39.1 L+₹1.8 L (4.72%)Rejected-Finance | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹42.8 L+₹5.5 L (14.6%)Rejected-Finance | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹43.6 L+₹6.2 L (16.6%)Rejected-Finance | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹49.8 L+₹12.4 L (33.3%)Rejected-Finance | L5 | Rejected-Finance Other than lowest |
| Sl No | Description | Qty | Unit | pardeep singh marwaha L1 | AVTAR SINGH RAJU L5 | J S MAAN ENTERPRISES L3 | VOHRA CONSTRUCTION CO L4 | GORAYA AND CO L2 |
|---|---|---|---|---|---|---|---|---|
| 1.00 | M&L for removal existing treatment, all loose gravel cement mortar, dirt, oil, grease and foreign material by jet of dry air, roughening and clean the surface mechanically or by grinding to make it smooth before application loose existing bituminious material manually and with heat torch gun to get smooth plain finished surface with no loose material on surface. Repair all joints & cracks and applying a coat of primer with smart care epoxy primer to seal the pores/ cracks and enhance the adhesion of the coating.
• Apply first coat of fibres reinforced elastomeric liquid water proofing membrane formulated with PU hybrid poymers and reinforcing acrylic fibres with sun reflective index (SRI) of 100-110, having minimum elongation of 300% to 350%, tensile strength of 1.8 Mpa to 2.9 Mpa and shall have cracks bridging ability upto 10-12 degree celcius with 33% dilution of priming coat. Laying of fiber mesh of 0.3mm thickkness weave in leno pattern having 45 gsm/sqm and pasting it properly with overlap of 50 mm and allow it to dry for 10 to 12hrs. Apply second of undiluted coat @0.45ltr/sqm and allow it to dry for 4 to 5hrs. Apply third and final coat undiluted @0.45 ltr/sqm all as specified and as per manufacturers specification having warranty for 10 years. (Note : Application of water proofing treatment will be done by Authorised Applicator of the company only) . | 4,820 | Sqm | 450 ₹21,69,000 Lowest | 671.87 ₹32,38,413.4 | 520 ₹25,06,400 | 576 ₹27,76,320 | 488 ₹23,52,160 |
| 2.00 | M&L for plain cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in flooring complete all as specified. | 15 | Cum | 4,000 ₹60,000 Lowest | 5,100 ₹76,500 | 6,000 ₹90,000 | 4,500 ₹67,500 | 4,488 ₹67,320 |
| 3.00 | M&L for PCC 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in floor kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed. | 6 | Cum | 5,000 ₹30,000 | 5,100 ₹30,600 | 7,000 ₹42,000 | 4,500 ₹27,000 | 4,488 ₹26,928 Lowest |
| 4.00 | Demolition of cement concrete in ground floor & paving n.exc 15cm below or above ground level all as specified and directed. | 21 | Cum | 300 ₹6,300 | 210 ₹4,410 | 1,000 ₹21,000 | 200 ₹4,200 | 188 ₹3,948 Lowest |
| 5.00 | M&L for ceramic glazed dark shade coloured tiles of size 450x300x7mm thick and including 10mm thick screed bed in CM (1:4) set and jointed in neat cement slurry and pointed in coloured cement mixed with pigment to match the colour of tiles on vertical surfaces of wall as in skirting/ dado including dismantling floor hearth or wall tilling with mortar bedding removing rubbish off the premises complete all as specified and as directed. | 100 | Sqm | 780 ₹78,000 | 787 ₹78,700 | 750 ₹75,000 | 877 ₹87,700 | 688 ₹68,800 Lowest |
| 6.00 | M&L for non skid dark coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm to 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white cement or coloured cement to match surface including 15 mm thick screed bed in CM 1:6 including dismantling floor hearth or wall tilling with mortar bedding removing rubbish off the premises complete all as specified and as directed. | 180 | Sqm | 780 ₹1,40,400 | 787 ₹1,41,660 | 750 ₹1,35,000 | 877 ₹1,57,860 | 688 ₹1,23,840 Lowest |
| 7.00 | Demolition of cement concrete (unreinforced) of any description and in any position not other wise specifically provided for complete all as specified and directed. | 10.5 | Cum | 300 ₹3,150 | 187 ₹1,963.5 Lowest | 1,000 ₹10,500 | 300 ₹3,150 | 188 ₹1,974 |
| 8.00 | M&L for water proofing treatment to sunken floors of toilets, laboratories, bath, WCs, kitchen etc as under:- (i) Application of two component acrylic modified cementitious coating :- (a) The surfaces to be applied shall be completely dry and free from containments such as dirt, dust, oil, surface treatments and old coatings. Concrete substrates shall be mechanically prepared using abrasive blast cleaning or milling to remove cement laitance existing coating and achieve a gripping profile that is clean, dry and free from laitance and any other from of surface containmation. The installation instruction in manufacturer's published literature shall be strictly complied with, including but not limited to the following:- (b) Chipping out any visible cracks in "V-Groove" pattern as applicable. Cleaning of cracks & filling with SIKA latex SBR 100 putty/Dr. Fixit 302 SBR latex/ perma latex SBR/FOSROC Nitbond SBR latex/Asian paint latex as required. Final cleaning of surface with powder grinder, wire brush, hair brush & vacum pressure. (c) Providing protection concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate), 50mm thick admixed with plastocrete over the applied water proofing coating on horizontal surfaces.(Admixture: Sikaplastocrete plus/FOSROC/Dr. Fixit/STP/CICO confirming to IS 2645.) (d) Dampen all surface immediately ahead of apllication of acrylic modified cementitious coating of SIKA top seal-107/Brush bomd FOSROC/Dr. Fixit/STP/CICO. (e) Whilst the surface is still damp from saturation (SSD) apply one coat of acrylic modified cementitious coating of SIKA top seal-107/ Brush bond FOSROC/Dr. Fixit/STP/ white first coat is wet. | 30 | Sqm | 1,200 ₹36,000 | 687 ₹20,610 | 800 ₹24,000 | 600 ₹18,000 Lowest | 688 ₹20,640 |
| 9.00(f) Apply glass fabric sheet of approved make while the first coat is wet. (g) Once touch dry, apply second coat of acrylic modified cementitious coating of viscosity as per manufacturer ins on the entire area. Second coat shall be applied after 6-8 Hrs of application of previous coat and in the direction right angle to the previous coat. (h) The waterproofing coating shall be taken to a height minimum 300mm above the finished floor level on the vertical surface. (j) Curing acrylic modified cementitious coating immediately after application (min 6-8 hrs drying) for a min of 3 to 5 days to ensure full cement hydration and to minimize cracking. (k) A protection plaster (15mm thick) in ready mix mortar to be a apllied on the walls. (l) All the corners and joints shall be pretreated with an elastic waterproofing sealing tape with a woven bonding mesh on each surface and an elastic expansion zone in the centre of make seal tape SIKA/FOSROC/Dr. Fixit/STP. (m) The membrane has to be protected in accordance with the manufacturer's recommendation until placement of concrete. The membrane to be inspected for damage just prior to concrete placement and carryout repairs in accordance with manufacturer's instructions. (n) Water proofing treatment shall be carried out through authorised applicators. | ||||||||
| 10.00(o) All the joints of pipes and traps within the sunken portion shall be sealed properly by epoxy sealant. (p) All CI/PVC Traps in sunken slabs to be enclosed with PCC 1:1.5:3 (using 20mm graded crushed stone aggregate) (min 15cm) all arround). (q) The sunken portion shall be filled with PCC 1:5:10 type E-2 (using 40 mm graded crushed stone aggregate) complete all as specified. (r) Providing drainage spout pipe GI 40mm dia light grade upto outside of outer wall (Approx 300 mm to 450 mmlong) incl cutting to existing wall and making good the distrubed surface complete all as specified and directed. (s) Providing 25mm thick cement concrete 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) as in flooring for laying floor finishes all as specified. Note:- Items no. (q), (r) and (s) shall be measured and paid seperately. | ||||||||
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
22 May 2026, 6:00 pmClosed
Garrison Engineer, Gurdaspur.
Garrison Engineer, Gurdaspur (Tibri)
Repair to leakage/ seepage from roof top, sunken slabs and connected plumbing complaints under AGE B/R-II at GE Gurdaspur.
2026_MES_762131_1
GE GSR-19/2026-2027
Open Tender
Civil Works
Item Rate
180 days
Garison Engineer
As per Tender Documents
8 documents required · 8 mandatory
₹500
GE Gurdaspur
₹90,000
17 Jul 2026
25 Apr 2026
29 May 2026
25 Apr 2026
22 May 2026
15 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | M&L for removal existing treatment, all loose gravel cement mortar, dirt, oil, grease and foreign material by jet of dry air, roughening and clean the surface mechanically or by grinding to make it smooth before application loose existing bituminious material manually and with heat torch gun to get smooth plain finished surface with no loose material on surface. Repair all joints & cracks and applying a coat of primer with smart care epoxy primer to seal the pores/ cracks and enhance the adhesion of the coating.
• Apply first coat of fibres reinforced elastomeric liquid water proofing membrane formulated with PU hybrid poymers and reinforcing acrylic fibres with sun reflective index (SRI) of 100-110, having minimum elongation of 300% to 350%, tensile strength of 1.8 Mpa to 2.9 Mpa and shall have cracks bridging ability upto 10-12 degree celcius with 33% dilution of priming coat. Laying of fiber mesh of 0.3mm thickkness weave in leno pattern having 45 gsm/sqm and pasting it properly with overlap of 50 mm and allow it to dry for 10 to 12hrs. Apply second of undiluted coat @0.45ltr/sqm and allow it to dry for 4 to 5hrs. Apply third and final coat undiluted @0.45 ltr/sqm all as specified and as per manufacturers specification having warranty for 10 years. (Note : Application of water proofing treatment will be done by Authorised Applicator of the company only) . | 4,820 | Sqm | - | - |
| 2 | M&L for plain cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in flooring complete all as specified. | 15 | Cum | - | - |
| 3 | M&L for PCC 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in floor kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed. | 6 | Cum | - | - |
| 4 | Demolition of cement concrete in ground floor & paving n.exc 15cm below or above ground level all as specified and directed. | 21 | Cum | - | - |
| 5 | M&L for ceramic glazed dark shade coloured tiles of size 450x300x7mm thick and including 10mm thick screed bed in CM (1:4) set and jointed in neat cement slurry and pointed in coloured cement mixed with pigment to match the colour of tiles on vertical surfaces of wall as in skirting/ dado including dismantling floor hearth or wall tilling with mortar bedding removing rubbish off the premises complete all as specified and as directed. | 100 | Sqm | - | - |
| 6 | M&L for non skid dark coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm to 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white cement or coloured cement to match surface including 15 mm thick screed bed in CM 1:6 including dismantling floor hearth or wall tilling with mortar bedding removing rubbish off the premises complete all as specified and as directed. | 180 | Sqm | - | - |
| 7 | Demolition of cement concrete (unreinforced) of any description and in any position not other wise specifically provided for complete all as specified and directed. | 10.5 | Cum | - | - |
| 8 | M&L for water proofing treatment to sunken floors of toilets, laboratories, bath, WCs, kitchen etc as under:- (i) Application of two component acrylic modified cementitious coating :- (a) The surfaces to be applied shall be completely dry and free from containments such as dirt, dust, oil, surface treatments and old coatings. Concrete substrates shall be mechanically prepared using abrasive blast cleaning or milling to remove cement laitance existing coating and achieve a gripping profile that is clean, dry and free from laitance and any other from of surface containmation. The installation instruction in manufacturer's published literature shall be strictly complied with, including but not limited to the following:- (b) Chipping out any visible cracks in "V-Groove" pattern as applicable. Cleaning of cracks & filling with SIKA latex SBR 100 putty/Dr. Fixit 302 SBR latex/ perma latex SBR/FOSROC Nitbond SBR latex/Asian paint latex as required. Final cleaning of surface with powder grinder, wire brush, hair brush & vacum pressure. (c) Providing protection concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate), 50mm thick admixed with plastocrete over the applied water proofing coating on horizontal surfaces.(Admixture: Sikaplastocrete plus/FOSROC/Dr. Fixit/STP/CICO confirming to IS 2645.) (d) Dampen all surface immediately ahead of apllication of acrylic modified cementitious coating of SIKA top seal-107/Brush bomd FOSROC/Dr. Fixit/STP/CICO. (e) Whilst the surface is still damp from saturation (SSD) apply one coat of acrylic modified cementitious coating of SIKA top seal-107/ Brush bond FOSROC/Dr. Fixit/STP/ white first coat is wet. | 30 | Sqm | - | - |
| 9 | (f) Apply glass fabric sheet of approved make while the first coat is wet. (g) Once touch dry, apply second coat of acrylic modified cementitious coating of viscosity as per manufacturer ins on the entire area. Second coat shall be applied after 6-8 Hrs of application of previous coat and in the direction right angle to the previous coat. (h) The waterproofing coating shall be taken to a height minimum 300mm above the finished floor level on the vertical surface. (j) Curing acrylic modified cementitious coating immediately after application (min 6-8 hrs drying) for a min of 3 to 5 days to ensure full cement hydration and to minimize cracking. (k) A protection plaster (15mm thick) in ready mix mortar to be a apllied on the walls. (l) All the corners and joints shall be pretreated with an elastic waterproofing sealing tape with a woven bonding mesh on each surface and an elastic expansion zone in the centre of make seal tape SIKA/FOSROC/Dr. Fixit/STP. (m) The membrane has to be protected in accordance with the manufacturer's recommendation until placement of concrete. The membrane to be inspected for damage just prior to concrete placement and carryout repairs in accordance with manufacturer's instructions. (n) Water proofing treatment shall be carried out through authorised applicators. | - | - | - | - |
| 10 | (o) All the joints of pipes and traps within the sunken portion shall be sealed properly by epoxy sealant. (p) All CI/PVC Traps in sunken slabs to be enclosed with PCC 1:1.5:3 (using 20mm graded crushed stone aggregate) (min 15cm) all arround). (q) The sunken portion shall be filled with PCC 1:5:10 type E-2 (using 40 mm graded crushed stone aggregate) complete all as specified. (r) Providing drainage spout pipe GI 40mm dia light grade upto outside of outer wall (Approx 300 mm to 450 mmlong) incl cutting to existing wall and making good the distrubed surface complete all as specified and directed. (s) Providing 25mm thick cement concrete 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) as in flooring for laying floor finishes all as specified. Note:- Items no. (q), (r) and (s) shall be measured and paid seperately. | - | - | - | - |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.43 MB
19TenderDocuments.pdf
Tender Documents • 1.52 MB
BOQ_853682.xls
BOQ • 1.50 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .