Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹36.3 LAccepted-AOC | ₹36.3 L | 1 | Accepted-AOC Lowest Bidder |
| 2 | 2₹38.1 LRejected-Finance | ₹38.1 L | 2 | Rejected-Finance Reject |
| Sl No | Description | Qty | Unit | KARUNYA ELECTRICALS GENERAL STORES L1 | Gracias Electricals L2 |
|---|---|---|---|---|---|
| 1.01 | Supply, Installation, Testing and Commissioning of Architectural Pole of 6mtr Height Single arm made of galvanised iron sections of 140mm & 76mm dia. •This architecturally designed pole is structurally sound. Wind speed considered in design 50m/s, IS 875: PART - 3 :1987 •Material for tubes steel of grade YST 210.• Material for base plate steel of grade E250 to IS 2062 ; 2011. The Bracket will be provided with reducer/expander for holding the suspended type fixture on to the main pole with all arrangements having position perpendicular to the ground. The bracket shall be single/double arm on 6mtr with a span of 1000mm. The bracket top shall be covered with FRP cap to enclose the pipe. The Pole will be placed with a Aluminium embellishments on the bottom & Middle section for aesthetic & Decorative purpose. The pole will be provided with an inbuilt junction box to fix 32Amp Connectors & 6Amp MCB inside the cut window of the bottom pipe the in built box should have a flush door of suitable size. The Decorative pole will be mounted on a square base plate of size 250 X 250mm having 12mm thickness. The mounting steel plate along with hot dip galvanised foundation bolts of size M16 X 600mm to be used for ensuring firm grouting in the specially designed RCC foundation. The Galvanised pole should be painted in 3 layer coating (Coating thickness should be more than 50 microns minimum) in which 1st layer with etch primer, 2nd layer with epoxy zinc primer & 3rd final layer with PU Paint of Matt Black on Pole and Golden on Aluminium Embellishment or as per choice. Make : Suncity, La Lumirie, Leska, Reytek, Havells as required and directed by engineer incharge. | 17 | Each | 46,500 ₹7.9 L | 47,445 ₹8.1 L |
| 1.02 | Supply, Installation, Testing and Commissioning 4M Pioneer Spot light pole from the ground level, pole material shall be pre galvanized mild steel complied with BS 1139/ 1161 made up of ERW 'B' class pipes. Minimum Wall thickness shall be 3.5mm. The bottom pipe shall be of diameter 114.3mm & top pipe shall be 60.1mm in diameter with wall thickness of 3.5mm & 3.0mm respectively. The Base Plate size shall be 200 X 200mm with thickness of 12mm MS material duly PU painted. Cast Aluminium embellishments for decorative & aesthetic looks of the poles shall be sand / die casted by LM6 grade material. Embellishment shall be placed at the bottom & intersection of the 2 pipes & properly bolted to withstand distortion. The bracket shall also have provision for spot light to highlight the statue figurine of 3M height. The pole shall be properly cleaned, machine polished and coated with epoxy zinc rich penetrating etch primer and finished with polyurethane base paint for a long lasting finish with 45 micron coat in required colour as approved of Premium make. The Pole shall be provided with a maintenance window of size 300mm length & 95mm width with Allen bolt locking arrangement. Loop in Loop out connector mounted on appropriate size Bakelite sheet with stud terminals along with 1no. 6A SP MCB (L&T or Siemens make) to be provided with each pole. The Pole shall be packed with shrink wrapping along with bubble paper wrap for avoiding scratches during transportation & installation. The Poles shall be supplied with foundation bolts M16 X 600mm made up of mild steel and threaded portion to be hot dip galvanized along with 2 nuts & 1 vicerper bolt. Factory test reports along with PDI & test certificates of galvanization & material TC to be attached along with the supply. The Pole shall withstand the wind speed of 75KMPH as per IS 875. Make : Suncity, La Lumirie, Leska, Reytek, Havells as required and directed by engineer incharge. | 4 | Nos | 35,550 ₹1.4 L | 35,580 ₹1.4 L |
| 1.03 | Supply Installation, testing and commissioning of 9 m high hot dipped galvanised conical poles with 1000mm Street light including 6-32A MCB (2 nos), Template 200PCD, 4arm bracket made from 40 mm. Dia ‘B’ class G.I. Pipe, 1.2m. in length along with pole cap of 300mm length and 80 mm dia.(Suitable to pole top) duly welded having bottom dia. from 155 to 170 mm, top dia.from 65 to 75 mm with suitable 4nos. M24 X 750 mm J type foundation bolts complete with all required accessories. Pole will Be Painted with P U Paint as per GTDC color of choice.Make Valmount, Bajaj, Transail, RR Ispat as required and directed by engineer incharge. | 2 | Nos | 23,000 ₹46,000 | 20,800 ₹41,600 |
| 1.04 | Supply, Installation, Testing and Commissioning of 60W decorative luminaire made of spun aluminium body with pressure die-cast heat management (PDCHM) and the IP65 optical compartment with high power LED/s is comprised of a deep drawn chemically polished and co-extruded, thermoformed polycarbonate protector stabilized agent UV rays suitable for 60W LED. Fitting should be suspended mounting type fixture. System Wattage:60W LED, Protection class:IP65, Driver Integral: Constant Current, Input Voltage: 230-240 Vac, Frequency: 50-60Hz, Operating Voltage:1200- 277Vac, Operating Temperature: 0deg to +50deg C, single phase ac supply.● light Source : Bridegelux, LED Lumens: @120lm/w 7200lm, CRI(Ra):>80, LED Colour Temperature: 3000K, Life Span:>59,000 Hours,, ● Physical Body: Die cast Aluminium Base, Body Spun Aluminium, Diffuser: Convex Type Translucent / V Translucent Polycarbonate glass, Mounting: Suitable for 48mm OD Pipe, Finish: Powder Coated Black, ●Driver Power Factor:>0.95, THD:87%. Fitting should have inbuilt driver with efficiency >0.9 and having surge protection device of 4KVA and external surge protection device of 10KVA. LED's of Bridgelux & driver to be of make Philips/Fulham. IP65 and LM79-2019 report to be provided. Make: Make : Suncity, La Lumirie, Leska, Reytek, Havells as required and directed by engineer incharge. | 17 | Each | 35,700 ₹6.1 L | 36,025 ₹6.1 L |
| 1.05 | Supply installation testing and commissioning of 150 W Flood Light made out of Pressure die-cast aluminium housing with specially designed optics, provide uniform light distribution to redefine outdoors and enhance architectural design with System efficacy of 100 lm/W.L70 life of 50000 Hrs. P.F.>0.95 with THD<10% ,CCT 5700 K,CRI 70,Surge Protection 4 Kv. Input voltage range of 120V to 300V.Certification:- LM79 & LM80 test report should be from govt approved Inhouse NABL lab/ government of India authorised lab. Make:-Philips, Wipro, Nice,Havells, Reytek, Leska, La Luminite as required and directed by engineer incharge. | 1 | Nos | 28,550 ₹28,550 | 35,600 ₹35,600 |
| 1.06 | Supply, installation, testing and commissioning of
80W LED streetlight fixture with pressure die cast housing with individual LEDs with modular secondary optics and IP66 protection and impact resistance of IK07 with 10KV Built-in Surge Protection Device. ake:-Philips, Wipro, Nice,Havells, Reytek, Leska, La Luminite as required and directed by engineer incharge. | 8 | Nos | 14,500 ₹1.2 L | 14,851 ₹1.2 L |
| 1.07 | Supply installation testing and commissioning of 200 W Spot Light made out of Pressure die-cast aluminium housing with specially designed optics, provide uniform light distribution to redefine outdoors and enhance architectural design with System efficacy of 100 lm/W.L70 life of 50000 Hrs. P.F.>0.95 with THD<10% ,CCT 5700 K,CRI 70,Surge Protection 4 Kv. Input voltage range of 120V to 300V.Certification:- LM79 & LM80 test report should be from govt approved Inhouse NABL lab/ government of India authorised lab. Make:-Crompton, Havells, Wipro, Crompton, K-lite, reteck as required and directed by engineer incharge. | 4 | Nos | 50,550 ₹2.0 L | 60,565 ₹2.4 L |
| 1.08 | SITC of IP: 66/IP:67 PVC Junction Box having the Facility to house 4 way Bakellite strip for connection to the spike light.(Make:- Hensel) | 4 | Nos | 2,150 ₹8,600 | 2,225 ₹8,900 |
| 1.09 | Supply of 3 core unarmoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.3 Core 2.5 sq.mm | 198 | Metre | 190 ₹37,620 | 175 ₹34,650 |
| 1.10 | Supply of 3 1/2 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.3 1/2 Core 35 sq.mm | 100 | Metre | 380 ₹38,000 | 438 ₹43,800 |
Tender Value
₹36.3 L
EMD Value
₹72,601
Closing Date
26 May 2025, 12:00 pmClosed
Executive Engineer
4th floor,Paryatan Bhavan, Panaji
Illumination of premises of Dr Francisco Luis Gomes Memorial at Navelim South Goa
2025_GTDCL_22608_1
GTDC/PC/EE(E)/2025-26/e-13
Open Tender
Electrical Works
180 days
Paryatan Bhavan, Panaji
Please refer Tender documents.
6 documents required · 6 mandatory
₹4,000
₹72,601
19 Jan 2026
8 May 2025
27 May 2025
8 May 2025
26 May 2025
8 May 2025
Amount
Supply, Installation, Testing and Commissioning of Architectural Pole of 6mtr Height Single arm made of galvanised iron sections of 140mm & 76mm dia. •This architecturally designed pole is structurally sound. Wind speed considered in design 50m/s, IS 875: PART - 3 :1987 •Material for tubes steel of grade YST 210.• Material for base plate steel of grade E250 to IS 2062 ; 2011. The Bracket will be provided with reducer/expander for holding the suspended type fixture on to the main pole with all arrangements having position perpendicular to the ground. The bracket shall be single/double arm on 6mtr with a span of 1000mm. The bracket top shall be covered with FRP cap to enclose the pipe. The Pole will be placed with a Aluminium embellishments on the bottom & Middle section for aesthetic & Decorative purpose. The pole will be provided with an inbuilt junction box to fix 32Amp Connectors & 6Amp MCB inside the cut window of the bottom pipe the in built box should have a flush door of suitable size. The Decorative pole will be mounted on a square base plate of size 250 X 250mm having 12mm thickness. The mounting steel plate along with hot dip galvanised foundation bolts of size M16 X 600mm to be used for ensuring firm grouting in the specially designed RCC foundation. The Galvanised pole should be painted in 3 layer coating (Coating thickness should be more than 50 microns minimum) in which 1st layer with etch primer, 2nd layer with epoxy zinc primer & 3rd final layer with PU Paint of Matt Black on Pole and Golden on Aluminium Embellishment or as per choice. Make : Suncity, La Lumirie, Leska, Reytek, Havells as required and directed by engineer incharge.
Supply, Installation, Testing and Commissioning 4M Pioneer Spot light pole from the ground level, pole material shall be pre galvanized mild steel complied with BS 1139/ 1161 made up of ERW 'B' class pipes. Minimum Wall thickness shall be 3.5mm. The bottom pipe shall be of diameter 114.3mm & top pipe shall be 60.1mm in diameter with wall thickness of 3.5mm & 3.0mm respectively. The Base Plate size shall be 200 X 200mm with thickness of 12mm MS material duly PU painted. Cast Aluminium embellishments for decorative & aesthetic looks of the poles shall be sand / die casted by LM6 grade material. Embellishment shall be placed at the bottom & intersection of the 2 pipes & properly bolted to withstand distortion. The bracket shall also have provision for spot light to highlight the statue figurine of 3M height. The pole shall be properly cleaned, machine polished and coated with epoxy zinc rich penetrating etch primer and finished with polyurethane base paint for a long lasting finish with 45 micron coat in required colour as approved of Premium make. The Pole shall be provided with a maintenance window of size 300mm length & 95mm width with Allen bolt locking arrangement. Loop in Loop out connector mounted on appropriate size Bakelite sheet with stud terminals along with 1no. 6A SP MCB (L&T or Siemens make) to be provided with each pole. The Pole shall be packed with shrink wrapping along with bubble paper wrap for avoiding scratches during transportation & installation. The Poles shall be supplied with foundation bolts M16 X 600mm made up of mild steel and threaded portion to be hot dip galvanized along with 2 nuts & 1 vicerper bolt. Factory test reports along with PDI & test certificates of galvanization & material TC to be attached along with the supply. The Pole shall withstand the wind speed of 75KMPH as per IS 875. Make : Suncity, La Lumirie, Leska, Reytek, Havells as required and directed by engineer incharge.
Supply Installation, testing and commissioning of 9 m high hot dipped galvanised conical poles with 1000mm Street light including 6-32A MCB (2 nos), Template 200PCD, 4arm bracket made from 40 mm. Dia ‘B’ class G.I. Pipe, 1.2m. in length along with pole cap of 300mm length and 80 mm dia.(Suitable to pole top) duly welded having bottom dia. from 155 to 170 mm, top dia.from 65 to 75 mm with suitable 4nos. M24 X 750 mm J type foundation bolts complete with all required accessories. Pole will Be Painted with P U Paint as per GTDC color of choice.Make Valmount, Bajaj, Transail, RR Ispat as required and directed by engineer incharge.
Supply, Installation, Testing and Commissioning of 60W decorative luminaire made of spun aluminium body with pressure die-cast heat management (PDCHM) and the IP65 optical compartment with high power LED/s is comprised of a deep drawn chemically polished and co-extruded, thermoformed polycarbonate protector stabilized agent UV rays suitable for 60W LED. Fitting should be suspended mounting type fixture. System Wattage:60W LED, Protection class:IP65, Driver Integral: Constant Current, Input Voltage: 230-240 Vac, Frequency: 50-60Hz, Operating Voltage:1200- 277Vac, Operating Temperature: 0deg to +50deg C, single phase ac supply.● light Source : Bridegelux, LED Lumens: @120lm/w 7200lm, CRI(Ra):>80, LED Colour Temperature: 3000K, Life Span:>59,000 Hours,, ● Physical Body: Die cast Aluminium Base, Body Spun Aluminium, Diffuser: Convex Type Translucent / V Translucent Polycarbonate glass, Mounting: Suitable for 48mm OD Pipe, Finish: Powder Coated Black, ●Driver Power Factor:>0.95, THD:87%. Fitting should have inbuilt driver with efficiency >0.9 and having surge protection device of 4KVA and external surge protection device of 10KVA. LED's of Bridgelux & driver to be of make Philips/Fulham. IP65 and LM79-2019 report to be provided. Make: Make : Suncity, La Lumirie, Leska, Reytek, Havells as required and directed by engineer incharge.
Supply installation testing and commissioning of 150 W Flood Light made out of Pressure die-cast aluminium housing with specially designed optics, provide uniform light distribution to redefine outdoors and enhance architectural design with System efficacy of 100 lm/W.L70 life of 50000 Hrs. P.F.>0.95 with THD<10% ,CCT 5700 K,CRI 70,Surge Protection 4 Kv. Input voltage range of 120V to 300V.Certification:- LM79 & LM80 test report should be from govt approved Inhouse NABL lab/ government of India authorised lab. Make:-Philips, Wipro, Nice,Havells, Reytek, Leska, La Luminite as required and directed by engineer incharge.
Supply, installation, testing and commissioning of 80W LED streetlight fixture with pressure die cast housing with individual LEDs with modular secondary optics and IP66 protection and impact resistance of IK07 with 10KV Built-in Surge Protection Device. ake:-Philips, Wipro, Nice,Havells, Reytek, Leska, La Luminite as required and directed by engineer incharge.
Supply installation testing and commissioning of 200 W Spot Light made out of Pressure die-cast aluminium housing with specially designed optics, provide uniform light distribution to redefine outdoors and enhance architectural design with System efficacy of 100 lm/W.L70 life of 50000 Hrs. P.F.>0.95 with THD<10% ,CCT 5700 K,CRI 70,Surge Protection 4 Kv. Input voltage range of 120V to 300V.Certification:- LM79 & LM80 test report should be from govt approved Inhouse NABL lab/ government of India authorised lab. Make:-Crompton, Havells, Wipro, Crompton, K-lite, reteck as required and directed by engineer incharge.
SITC of IP: 66/IP:67 PVC Junction Box having the Facility to house 4 way Bakellite strip for connection to the spike light.(Make:- Hensel)
Supply of 3 core unarmoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.3 Core 2.5 sq.mm
Supply of 3 1/2 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.3 1/2 Core 35 sq.mm
Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.4 Core 16 sq.mm
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm in the existing RCC/HUME/STONEWARE Metal pipe, etc. complete as required
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable) and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required.(a) In soily strata
Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 1/2 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. (1) 3 x 1.5/2.5 Sq. mm.
Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 3 1/2 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.3 1/2 x 35 Sq. mm.
Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.(4) 4 x 16 Sq. mm.
Earthing with GI earth pipe 2 mts long 40 mm dia medium class with ISI mark,of approved brands, including accessories and providing masonry enclosure with CI/RCC cover having locking /lifting arrangement and watering pipe etc. with charcoal or coke and salt) as required as per the Earthing Drawing provided by the Engineer-Incharge.The scope of work includes the following: a) Excavation of pit of size 1.0x1.0x 2.0 mtrs(min) and disposal of excavated soil. b) Class B GI pipe, 40mm diameter as per specifications. c) Charcoal/salt as per specs ( paid seperately). d) Refilling the pit of size 1.0x1.0x 2.0 mtrs(min) with soft black soil of minimum resistivity i/c transportation. e)Masonary chamber with proper foundation, cover plate and locking arrangement. f) Testing of earth value with earth megger and certifications of its value. Aluminium tag with embossed earthing value to be attached to the pipe. g)watering arrangement(plumbing will be paid seperately).(b) In rocky strata
Supplying and laying 25 mm x 5 mm GI strip in 40 mm dia GI pipe from earth electrode as required
Earthwork in excavation by mechanical means (hydraulic excavator)/manual means in foundation pipeline trenches drain (not exceeding 1.5 m in width or 10 sq.m. on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directedwithin a lead of 50m.All kinds of soil
Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete.
Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded granitic or basaltic stone aggregate 40 m nominal size) excluding cost of centering, shuttering and finishing.All works upto plinth level
Centering & shuttering including Strutting, Propping & removal of forms for :Foundations, Footings, Bases for columns
Providing TMT steel reinforcement bars of (SAIL, TATA. VIZAG, JSW Steel Ltd.) ) (Confirming to IS 1786 of 1986) for RCC work (conforming to I.S. 1786 of 1986) including bending, binding & placing in position in all the floors along with the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member.
Providing and laying in position ready mixed concrete (RMC) High Performance Concrete per MORTH clause 1715 manufactured in fully automatic batching plant and transported to site of work in transit mixer for a lead upto 10kms having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C., from the transit mixer to the site of laying, excluding the cost of centering, shuttering, finishing and reinforcement including the cost of admixtures in recommended porportions as per IS : 9103 to accelerate/retard setting of concrete, improve workability without imparing strength and durability as per the directions of the engineer-in-charge. All works upto floor V level.M-20 grade of concrete
Gracias Electricals (BID ID -48682)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid