CERTAIN BR REPAIR IN OTM MD ACCN OF Z W AND X IN SECTOR V UNDER GE (WEST) FEROZEPUR CANTT

Amount

Dismantling brick tiles or terracing tiles laid in single layer on roofs jointed and pointed in cement or lime mortar complete all as specified and directed.

Demolition of mud phuska in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and directed.

M&L mud phuska, 80mm thick average, consolidated thickness, on flat roofs including 25 mm thick mud plaster followed by rendering, 10mm thick in cement mortar 1:4 on any face of brick walls or concrete surfaces, surfaces finished even and smooth without using extra cement followed by a tack coat of industrial bitumen 85/25 @ 1.20 Kg per square metre over a coat of bitumen primer @ 0.30 litre per square metre including preparation of roof surfaces including 150 micron popy film including preparation of roof surfaces complete all as specified and directed.

M&L brick tiles 40mm thick laid on mud mortar (mud phuska) and joints grouted flush in cement mortar 1:3 mixed with 5% of crude oil by weight of cement and pointed flush including leaping plaster complete all as specified and directed.

M&L brick tiles 40mm thick laid on mud mortar (mud phuska) and joints grouted flush in cement mortar 1:3 mixed with 5% of crude oil by weight of cement and pointed flush including leaping plaster but except brick tiles complete all as specified and directed. Note: Serviceable brick tiles dismantled from ser item No. 1 here-in-before to be reused.

M&L covet fillet in plain cement concrete 1:2:4, type B-0 using 12.5mm graded stone aggregate minimum radius of 75mm thick as in roof and parapet wall junction, roof benching, kerbs, mud stop, coping, rounded or chamfered on edges, including necessary sloping on roof including form work complete all as specified and directed.

Deemolition of brick work built in cement mortar of any specification and in any position complete all as specified and directed.

M&L brick work in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan not exceeding 6 metre mean radius complete all as specified and directed.

All as per ser item No. 8 here-in-before but except bricks Note: Serviceable bricks dismantled from ser item No. 7 shall be reused.

M&L brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.

Taking down cement plaster from brick walls of any description, racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L rendering, 15mm thick in cement mortar 1:6 on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering, 15mm thick in cement mortar 1:4 on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering, 5 mm thick in cement mortar 1:3 on any face of ceilling or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L complete removal of existing treatment over wall and applying two coats of distemper oil emulsion over 1mm thick wall care putty complete all as specified and directed.

M&L preparing newly plastered surfaces of wall and applying two coats of distemper oil emulsion over 1mm thick wall care putty of any shade on walls surfaces complete all as specified and directed.

M&L preparation of newly plastered surface of ceiling or concrete surfaces and applying three coats of white wash complete all as specified and directed.

M&L preparation of old surfaces of ceiling and applying one coat of white wash complete all as specified and directed.

M&L preparation of newly plastered surfaces of walls etc., and applying three coats of white wash complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) of size not exceeding 1.5 Sqm each including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts and removing from site to store or otherwise as directed complete all as specified and directed.

All as per ser item No. 20 here-in-before but size exceeding 1.5 Sqm and not exceeding 4 Sqm each.

Taking down shutters of any description exceeding 1.00 sqm area and not exceeding 2.00 Sqm each and refixing in the same opening complete all as specified and directed.

All as per ser item No. 22 here-in-before but resecuring, or easing & adjusting without taking down.

Taking down shutters of any description exceeding 1.00 sqm area and not exceeding 2.00 Sqm each complete all as specified and directed.

S&F factory made pressed steel frames made of 1.25mm thick MS sheet of profile 125mmx60mm for door and window frames with one rebate including lock strike plate, shock absorbers, 20mm dia 60mm long MS conduit for housing of a drop bolt, butt hinges, hold fasts/lugs etc and treating of internal surfaces of chowkhats and hold fasts/lugs with a coat of coal tar or black paint including hinges etc complete all as specified and directed.

S&F factory made pressed steel frames made of 1.25mm thick MS sheet of profile 105mmx60mm for door and window frames with one rebate including lock strike plate, shock absorbers, 20mm dia 60mm long MS conduit for housing of a drop bolt, butt hinges, hold fasts/lugs etc and treating of internal surfaces of chowkhats and hold fasts/lugs with a coat of coal tar or black paint including hinges etc complete all as specified and directed.

S&F factory made 35mm thick, 2nd class hard wood (Hollock), plain framed, paneled shutters, any number of panels, panels shall be of 12mm thick BWR glade veneered particle board medium density, wood particle board with commercial face veneers, size of members as specified in clause 8.24 (a) of MES Schedule Part-I section-8 complete all as specified and directed.

S&F factory made 35mm thick, 2nd class hard wood (Hollock), glazed and skeleton shutters open rebated and prepared to receive glass/gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass etc for doors, size of members as specified in clause 8.24 (a) of MES Schedule Part-I Section-8, complete all as specified and directed.

S&F factory made box type window with pintle hinges & 2 Nos 150mm mild steel tower bolts to each shutter steel handle and with glazing bars dovetailedor welded and with one shop coat of zinc chromate primer complete all as specified and directed.

M&L factory made box type window with pintle hinges & 2 Nos 150mm mild steel tower bolts to each shutter steel handle and with without glazing bars both dovetailedor welded and with one shop coat of zinc chromate primer complete all as specified and directed.

S&F factory made steel ventilator side/top hung with glazing bars dovetailed or welded and with one shop coat of zink chromate primer complete all as specified and directed.

S&F framed work such as grills, gratings etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to Fe 290 (Gde -E -165) complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm single piece extruded PVC profiles reinforced with 19mm x 19mm MS square tube provided with EPDM rubber gasket weather seal through out the frame and the profile mitre cut at two corners and joined by inserting 2 nos 150mm long brackets of 15mm x 15mm MS square tube inside 19mm x 19mm MS square tube suitably screwed complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes of size 15mm x 15mm for top and bottom rails and 19mm x 19mm for stiles, MS frame covered with 5mm thick single piece extruded PVC profile 'C' channel having a 5mm thick PVC sheet strip of 20mm width struck inside with solvent cement, forming stiles, and 5mm thick single piece extruded PVC profile for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, panelling of 5mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with PVC sheet beading, and joined together with solvent cement adhesive etc all as per manufacturer's instructions and drawings as shown in SSR Part-I 2009 complete all as specified and directed.

Dismantling of boarding, any description, fixed in any position with nails complete all as specified and directed.

S&F 18mm thick prelaminated particle board, flat pressed single layer type or three layer type with BWR type adhesive, medium density interior grade, prelaminated both side with decorative choice lamination, fixed with screws as in shutters & shelves including 6mm thick teak wood leaping on three sides and 20mm thick on hanging side complete all as specified and directed.

S&F factory made PVC cup boards/ Shelf / Partition of required size consisting of panel of 18mm thick Celuka PVC Ply and for supporting the hold of Shelf/ Partition and shall provided 3edges in size 18mm x18mm as per required length. The front side of the edge visible in the front of the shelf/ Partition to be edge lipped by 18mm width x 1mm thick PVC sheet using solvent cement etc. complete as direction of manufacturer's specificaton and drawing and all as specified and directed.

M&L painting to new wood surfaces of any description, over 10cm width or girth two coats with synthetic enamel paint over a coat of pink primer including preparation of surfaces complete all as specified and directed.

M&L preparation of new steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of redoxide primer complete all as specified and directed.

M&L preparation of old painted wood or wood based surfaces of any description over 10 cm width or girth and applying a coat of synthetic enamel paint complete all as specified and directed.

M&L preparation of old painted steel or steel based surfaces of any description over 10 cm width or girth and applying a coat of synthetic enamel paint, complete all as specified and directed.

S&F PTMT butt hinges, 100 mm long and fixed with steel screws complete all as specified and directed.

S&F PTMT tower bolts, 150 mm long and fixed with steel screws complete all as specified and directed.

S&F PTMT door handle, 150 mm long and fixed with steel screws complete all as specified and directed.

S&F mild steel door handles, stove enameled black, medium weight 125 mm long and fixed with steel screws complete all as specified and directed.

S&F mild steel barrel tower bolts, stove enameled black, with bright bolt, medium weight 150 mm long and fixed with steel screws complete all as specified and directed.

S&F 300mm long mild steel, sliding door bolt, plate type, stove enameled black, with bright bolt not less than 12 mm dia with and including bolts and nuts complete all as specified and directed.

S&F 300mm long Aluminum alloy anodised, sliding door bolt with hasp, staple (bolt type) and fix clips of sheet, cast of extruded section and fixing bolts and sliding bolts of extruded section or cast Aluminum alloy complete all as specified and directed.

S&F continous (piano) hinges of mild steel bright finish or electro galvanised with flap (when open) 30mm, fixed with steel screw complete all as specified and directed.

S&F Aluminum anodised handles 150 mm long fixed to doors complete all as specified and directed.

S&F Aluminum anodised handles 100 mm long fixed to windows complete all as specified and directed.

S&F Aluminum anodised tower bolts 100 mm long fixed to windows complete all as specified and directed.

S&F in repair 100mm long hasp and staple, safety type, Aluminum anodised including bolt to hinge plate and fixed with screws and fixed complete all as specified and directed.

S&F 150mm Floor door stopper of Aluminum alloy body and tongue, anodized with hard drawn steel spring complete all as specified and as directed.

S&F in repair 300 mm mild steel ordinary rat tail spring including roller and roller plate complete all as specified and as directed.

S&F in repair butt hinges, 100mm long of mild steel, medium weight, cold rolled fixed with steel screws or welded to steel frame where required complete all as specified and as directed.

S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.

All as per ser item No. 57 here-in-before but fixed in repairs.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F 3mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads, in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.

Taking down Aluminum windows shutters only (area exceeding 0.5 Sqm but not exceeding 1.5 Sqm each) and dismantling all members and reassembling the same with and including new screws, new rubber gasket & new Aluminum cleats of existing make and also refixing the locks & rollers in existing position with and including new screws including refixing the window shutters in same opening complete all as specified & directed.

Hacking out old broken glass (any thickness, size quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and as directed.

S&F 4.8 mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

All as per ser item No. 63 here-in-before but exceeding 0.5 Sqm in each pane.

S&F powder coated of (any colour) Aluminium door window, ventilator etc fixed/sliding or pull and push type in shutter frames or shutters with two/three track sliding Aluminium frame of approved size, including necessary joining cleats, glazing clips, powder coated aluminium snap beading, screws, including necessary anodised Aluminium fittings like handles etc including taking down all as per manufacturers instructions complete all as specified and directed. Note: EPDM Rubber beading/gasket measured and paid for seperatley. Make (Aluminium frame): Jindal/Hindalco or Equivalent

S&F EPDM rubber beading around glass in Aluminum windows /ventilator shutters complete all as specified and directed.

S&F Mild steel curtain rod powder coated with fixing side brackets, end cups, rings @ 10 Nos per running metre and fixed with PVC rawl plugs & steel screws as in repairs complete all as specified and directed.

Demolition of un-reinforced cement concrete of any description and in any position not otherwise specially provided for complete all as specified and directed.

M&L cement concrete 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in roof kerbs or mud stops, bed blocks, back filling in chowkhats, benching etc including necessary form work complete all as specified and directed.

Demolition of un-reinforced cement concrete in ground floor and paving not exceeding 15 cm thick (below or above ground level) complete all as specified and directed.

M&L cement concrete 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in floor topping, 40mm thick, surfaces finished even and fair without using extra cement complete all as specified and directed.

M&L 50mm thick, PCC 1:3:6, type C-1 (using 20 mm graded stone aggregate) as in plinth protection, shall be laid in (1:20) slope. The concrete shall be laid at a stretch not exceeding 3-meter in length. Joint gap between the adjoining slab, at corners and at junctions of wall shall not exceed 10mm in width and shall be sealed with mastic filling i.e. one part of bitumen 85/25 garde mixed with 3 part of sand. Top surface of concrete shall be finished even and smooth without using extra cement. Joints shall be provided at not more than 3-meter interval at corner and junction walls complete all as specified and directed.

M&L 25mm thick cement concrete 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate) as in sub base of flooring, surface finished rough to receive floor topping complete all as specified and directed.

Supply only 38mmx3mm glass dividing strips as in floors including fixing to floor topping complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar complete all as specified and directed.

M&L machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade, jointed and pointed with gray cement and no pigment over sand cushioning complete all as specified and directed.

M&L sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L Non - skid coloured Ceramic tiles 7mm to 8mm thick (square/ rectangular), premium quality area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over and including screed bedding 15mm thick in cement mortar 1:6, complete all as specified and directed.

M&L Non - skid coloured Ceramic tiles 7mm to 8mm thick (square/ rectangular), premium quality on vertical surfaces such as in skirting / dado etc area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over and including 10 mm thick rendering in cement mortar 1:4, complete all as specified and directed.

M&L Non - skid ceramic coloured tiles 7mm to 8mm thick (square or rectangular) area of eacch tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floors etc.. Set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floors including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L dark shade vitrified ceramic tile 10 mm thick (square or rectangular) polished area of each tile not exceeding 0.36 Sqm in floors etc.., set and jointed in neat cement slurry and pointed in white cement to match including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L Glazed ceramic coloured tiles in vertical surfaces 450mm X 350mm and 7 mm thick set and jonnted in cement slurry and pointed in white or colour cement to match including 10mm thick back coat in cement mortar 1:4 complete all as specified and directed.

S&F in replacemnt lid of PVC water tank of capacity 500 litre including screwing with existing water tank with PVC nut and bolts complete all as specified and directed.

Taking up or down 15mm dia bore steel tubing and connections including cleeaning for refixing or removal to store complete all as specified and directed.

Taking up or down 20mm dia bore steel tubing and connections including cleeaning for refixing or removal to store complete all as specified and directed.

S&F steel water tubes, 15mm diameter medium grade galvanized, with all fitting and fixed to walls and ceiling or laid in floors including necessary cutting through walls and making good with cement mortar.

S&F steel water tubes, 20mm dia bore medium grade galvanized, with all fitting and fixed to walls and ceiling or laid in floors including necessary cutting through walls and making good with cement mortar complete all as specified and directed.

Fixing only, after cleaning old steel water tubing, 15 mm dia bore and connections in new or old position using new fittings complete all as specified and directed. Note :- Servicable pipes obtained from item 85 shall be reused and cost of new fittings, if required shall deemed inclusive of quoted rates.

Fixing only, after cleaning old steel water tubing, 20 mm dia bore and connections in new or old position using new fittings complete all as specified and directed. Note :- Servicable pipes obtained from item 86 shall be reused and cost of new fittings, if required shall deemed inclusive of quoted rates.

S&F Bib taps, fancy type chromium plated, screwed for 15mm bore of iron pipe or for brass ferrule and fixed in repair complete all as specified and directed.

S&F Stop valves, fancy type, chromium plated with long shank and cup (concealed type), screwed both ends for 15mm bore of iron pipe or for union and fixed in repair complete all as specified and directed.

S&F Pillar taps, cast Copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with or without lettered 'HOT' or 'COLD' with long screwed shanks and fly nuts, screwed for 15mm bore of iron pipe and fixed in repair complete all as specified and directed.

S&F Gun-metal Gate valve of 20mm dia with iron wheel head screwed both ends for iron pipe as in repair complete all as specified and directed.

S&F 15mm bore Bib tap standard of PTMT any colour screwed, for iron pipe as in repair complete all as specified and directed.

S&F 15mm bore Stop valve of PTMT any colour high pressure screwed, for iron pipe as in repair complete all as specified and directed.

S&F 20mm bore Stop valve of PTMT any colour high pressure screwed, for iron pipe as in repair complete all as specified and directed.

S&F 15mm bore angle stop valve of PTMT any colour high pressure screwed, for iron pipe as in repair complete all as specified and directed.

M&L taking down existing Bib tap and pillar taps/sink mixture/wash hand basin mixture of any type for replacing washer/ brass spindle/handle/head etc. and refixing the same complete all as specified and directed. Note: -Quoted rate shall deemed inclusive of supply of new Washer/Spindle.

M&L taking down existing stop valve 15 mm bore by replacing washer/spindle etc. and refixing the same complete all as specified and directed. Note: -Quoted rate shall deemed inclusive of supply of new Washer/Spindle.

S&F PVC waste pipe 32 mm bore suitable to waste coupling pipe attach with rubber ring joints fixed to waste coupling of sinks / WHBs complete all as specified and directed.

S&F Low density polythene pipe (LDPE) of pressure rating 6 Kg Per Sqcm, 450 mm long, heavy duty with two sets of brass nuts & washers (one at each end) etc suitable for 15mm bore of pipe as in repair complete all as specified and directed.

S&F 20mm bore ball valves high pressure of PTMT with epoxy coated Aluminum rod & high density plastic ball screwed for iron pipe complete all as specified and directed.

S&F 500 litre capacity rotational moulded triple layered polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 20mm bore ball valves high pressure of PTMT with epoxy coated Aluminum rod & high density plastic ball screwed for iron pipe as in repair complete, all as specified in SSR Part-I complete all as specified and directed.

S&F 1000 litre capacity rotational moulded triple layered polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 20mm bore ball valves high pressure of PTMT with epoxy coated Aluminum rod & high density plastic ball screwed for iron pipe as in repair complete, all as specified in SSR Part-I complete all as specified and directed.

S&F vitreous China squatting pan, Orissa pattern, size 580mmx440mm white/ coloured with integral foot rests including flush pipe and connection to trap, and to flushing pipe, anti-syphonage pipe, etc. as in repair complete all as specified and directed.

S&F vitreous China wash down water closet pan ( pedestal pattern ), white/ coloured including seat & cover, flush pipe, connection to drain and to flushing pipe, anti-syphonage pipe, etc. as in repair complete all as specified and directed.

S&F vitreous China wash down water closet pan one piece of Size 665mm x 360mm x 750 mm with integrated cisteren, seat cover and twin flush settings including soft close seat cover and connection to drain as in repair complete all as specified and directed. Make :- Prayag (SAGA) or equivalent in approved make

S&F PVC 10 litre capacity valveless syphonic action type, flushing cictern, low level, white/ coloured with inlet, ball valve, float and handle including brackets and connection to pipe et.c.complete all as specified and directed.

S&F 1mm thick stainless steel sink with dranage board, plugs, washers, PVC waste pipe, union, CP coupling & cantilever brackets embedded in cement and sand mortar in wall, overall size 915mmx460mm bowl size 410mmx330mmx160mm as in repair complete all as specifid and directed.

S&F Stainless steel plate rack of standard pattern & of size 900mm x 750mm x 250mm. The thickness of stainless steel sheet shall be 1.00 mm & grade of sheet shall be 304 AISI including fixing to wall with 4 Nos 50mm screws & PVC rawl plugs complete all as specified and directed.

M&L wash hand basin, flat back 550mmx400mm vitreous china (white) including PTMT waste fittings, 32mm bore size, waste pipe, PVC waster coupling 32mm bore, angle iron/cast iron brackets of required size as directed & making good disturbed surfaces to match with the existing as in repair complete all as specified and directed.

S&F PTMT grating doom 100mm dia with or without waste hole fixed in repairs complete all as specified and directed.

S&F in repair Swivel shower of chromium plated 125 mm any colour for fixing with15mm pipe complete all as specified and directed.

S&F Towel rail, 20mm dia brass chromium plated, 600mm long with fancy type brass chromium plated brackets on both sides and fixed to walls with steel screws and wooden/rawl plugs as in repairs complete all as specified and directed.

S&F Stainless steel soap dish (not less than 1mm thick) of type as directed, fixed to walls with chromium plated brass screws with wooden/rawl plugs, in repair complete all as specified and directed.

Taking down eaves gutters and rain water pipes( any size or pattern), including all fittings heads shoes bends swan-necks etc complete all as specified and directed.

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches complete all as specified and directed.

S&F 75mm dia PVC (SWR) bends any radius complete all as specified and directed.

S&F 110 mm dia PVC (SWR) bends any radius complete all as specified and directed.

S&F 75mm dia Junction single (Single or double T) equal or unequal complete all as specified and directed.

S&F 110mm dia Junction single (Single or double T) equal or unequal complete all as specified and directed.

M&L PVC (SWR) floor trap 75 mm, plain with PVC grating including jointing with solvent cement etc., complete all as specified and directed.

M&L applying bond coat of epoxy bonding agent & cement in 1:1 ratio for bonding old and new concrete on damaged surfaces applying polymer modified mortar in cement mortar 1:3 including mixing of polymer latex additives 60mm average thickness (Chajjas fins, borders etc) complete all as specified and directed. Notes: (i) Quantity of polymer to be used by 15 % by weight of cement. (ii) Use the electrical mixer to get homogeneous dough on bond coat surfaces. (iii) To achieve required thickness repeat this step after 24 hours as required. (iv) Keep the surfaces moist using water fog for 5 to 7 days etc. (v) Rate shall be inclusive of all necessary scaffolding for building height up to 24 m.complete all as specified and directed. Make (Epoxy bonding agent): Krishna, Dr. Fixit, MC Bauchemie and M/s Chemistik.

S&F 1.00 mm laths thickness steel rolling shutters, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated push-pull or manual type as in repair complete all as specified and directed.

All as per ser item No 127 here-in-before but gear oprated type with bevel gear box and crank handle.

S&F safety lever locks mild steel with 4 levers for rolling shuters as in repair complete all as specified and directed.

S&F ball bearing for rolling shutters as in repair complete all as specified and directed.

S&F 5 mm thick coloured of any selecetd design hollow PVC wall cladding strips interlocked to each other fitted to wall including PVC 'U' shapes at top/ bottom and PVC angles at windows/door openings as in repair all as per manufacturer’s fixing instructions complete all as specified and directed.

Demolition of ceiling boards of any description, and any thickness including cover fillets and frame work complete all as specified and directed.

M&L GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exceeding 1.2m length) of 0.55 mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre complete all as specified and directed.

M&L fancy designed 6 mm thick exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mm x 600mm grid (frame work for ceiling shall be measured and paid separately) fixed to GI frame work in ceiling and all other similar works complete all as specified and directed.

S&F WHB Brackets as in repair complete all as specified and directed.

S&F Pressure JET for EWC including PVC connection and CP fitting as fixed in repairs and complete all as specified and directed.

S&F 15 mm bore fancy type health faucet with SS hose in repair complete all as specified and directed.

S&F Seat Cover (Whitecolour) for pedestal pattern as fixed in repairs complete all as specified and directed.

S&F 15 mm bore fancy type wall /WHB brass chromium plated mixer for mixing hot & cold water screwed down for iron pipe as in repair complete all as specified and directed.

S&F Push tap 15 mm bore any colour of PTMT suitable for urinals screwed for iron pipe and fixed (Minimum weight 15mm-47 Gram) as in repair complete all as specified and directed.

S&F Sheet glass shelf assembly consisting of 5.5 mm thick sheet galss shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long as in repair complete all as specified and directed.

M&L Granite (of any colour) 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing as in kitchen platform, flooring and all other similar works complete all as specified and directed.

S&F Aluminum (extruded section) body door closer hydraulically regulated designation No 3, universal type, suitable for door shutters of 851mm to 1000mm in width and weight between 61 Kg to 80 Kg as in repair complete all as specified and directed.

M/s AH Construction Co.

Marwaha Builders

Kissan contractor and engg works

B.L. Chaudhri and Co.

Easyways Enterprises

M/s Vishant Construction Co