CA NO GE/ND-04/2023-24 REPAIR / MAINTENANCE OF SUBMAIN, LOADLINE DBs, INTERNAL POINT WIRING , LIGHTS, EXHAUST FAN , CEILING FAN, WALL FAN, DBs MCBs AND OTHER E/M FITTINGS FIXTURE AND WATER SUPPLY DESTRIBUTION LINE, PUMP, FOUNTAIN CLEANING OF S

Amount

Taking down carefully old point wiring (Light / Fan/ Socket/ Bell Point ) with aluminium/ copper conductor cable complete including fittings such as ceiling rose, holders, regulators, bell, switch and socket from existing concealed conduits and making good the disturbed surface of wall/ floor complete to match with the existing surface/finishes all as specified and directed.

Material and labour for point wiring with PVC insulated unsheathed multi stranded, single core, FRLS, copper conductor cable of size 1.5 sqmm 1100 Volts including one run of PVC insulated unsheathed multi stranded, single core, FRLS , copper conductor cable of size 1.5 sqmm as earth continuity conductor connected to common earth dolly drawing through PVC concealed conduit but including provn of new galvanised modular cencealed box with suitable back & front plate for housing the modular switches, sockets & fan regulators complete all as specified directed.

One light/fan/bell point controlled by one No, one way switch complete all as specified directed.

One 6 Amp socket outlet point controlled by one number, one way switch on same board complete all as specified directed.

One 6 Amp socket outlet point controlled by one number, one way switch on independent board complete all as specified directed.

One 16 Amp socket outlet point controlled by one number, one way switch on independent board with cable of size 2.5 sqmm 1100 Volts including one run of size 1.5 sqmm as earth continuity conductorall complete all as specified directed.

One 32 Amp socket outlet point controlled by one No, one way switch on independent board with cable of size 4 sqmm 1100 Volts including one run of size 2.5 sqmm as earth continuity conductorall complete all as specified directed. Note :- (i) No cutting shall be done in the roof for laying PVC conduit for ceiling point wiring. In this specified portion wire shall run through the existing conduit or surface new conduit shall be provided as required. (ii) In case the wiring is encountered with any beam/column, then the wiring will run on surface to avoid any damage to the RCC portion.

S&F modular switch 1 way 6 Amp, SP, one module 230 volts AC complete all as specified directed.

S&F modular switch 1 way 16 Amp, SP, one module 230 volts AC complete all as specified directed.

S&F modular socket out let 2/3 pin combined 6 Amp, 230 volts two module AC complete all as specified directed.

S&F modular socket out let 2/3 pin combined 6/16 Amp, 230 volts two moduleAC complete all as specified directed.

S&F modular type electronic fan step regulator 120W, modular type 2 module complete all as specified directed.

S&F modular bell push switch 6 Amps, one module 230 Volts AC complete all as specified directed.

S&F modular AC BOX suitable for load current upto 32 Amp 230 Volts AC complete all as specified directed.

S&F in replacement LED tube light fitting 1x 20 watts, 220 volts AC, 1200mm, with Aluminium housing & integrated electronic driver complete with driverwith polycarbonate diffuser & thd, 10 % including connecting up with three core twisted flexible copper conductor cable of suitable size from ceiling rose complete all as specified directed.

S&F in replacement sleek LED light 2 feet, 10 watts, 220 volts AC decorative type complete with driver, holders & including suitable LED lamp including connecting up with three core twisted flexible copper conductor cable of suitable size complete all as specified directed.

S&F in replacement LED luminaire 595 x 595 x2 mm, (2'x2') 36 watts, 220 volts AC recessed type with high efficiency PMMA diffuser, soft glare free light complete with suitable driver, holders & including suitable LED lamp suitable for POP/Gypsum/roof ceiling including connecting up with three core twisted flexible copper conductor cable of suitable size from ceiling rose including cutting of false ceiling in suitable size & making good the disturbed surface & matching with the existing surface complete all as specified directed.

S&F in replacement LED luminaire 1180x280x70 mm (4'x1'), 30 watts,cool white 220 volts AC recessed type with high efficiency PMMA diffuser, soft glare free light complete with suitable driver, holders & including suitable LED lamp suitable for POP/Gypsum/roof ceiling including connecting up with three core twisted flexible copper conductor cable of suitable size from ceiling rose including cutting of false ceiling in suitable size & making good the disturbed surface & matching with the existing surface complete all as specified directed.

S&F in replacement warm/cool white LED luminaire recess/surface mounted downlighter with pressure die cast alluminium heat sink & PC diffuser round shape 24 watts, 220 volts AC finished in white white powder coated complete with integrated driver, holders & including suitable LED lamp including connecting up with three core twisted flexible copper conductor cable of suitable size from ceiling rose including cutting of false ceiling in suitable size & making good the disturbed surface & matching with the existing surface complete all as specified directed.

S&F in replacement LED luminaire recess mounted downlighter with pressure die cast alluminium heat sink & PC diffuser round shape 15 watts warm white/cool white, 220 volts AC , Cut outdia 6 inch finished in white white powder coated complete with integrated driver, holders & including suitable LED lamp including connecting up with three core twisted flexible copper conductor cable of suitable size from ceiling rose including cutting of false ceiling in suitable size & making good the disturbed surface & matching with the existing surface complete all as specified directed.

S&F in replacement LED luminaire recess mounted downlighter with pressure die cast alluminium heat sink & PC diffuser round shape 12 watts warm white/cool white, 220 volts AC ,dimension 45 mm hight and 150 mm width finished in white white powder coated complete with integrated driver, holders & including suitable LED lamp including connecting up with three core twisted flexible copper conductor cable of suitable size from ceiling rose including cutting of false ceiling in suitable size & making good the disturbed surface & matching with the existing surface complete all as specified directed.

S&F in replacement LED luminaire recess mounted downlighter with pressure die cast alluminium heat sink & PC diffuser round shape 6 watts warm white/cool white, 220 volts AC,Cut out dimensions 100 mm Dia 118 mm Height 35 mm finished in white white powder coated complete with integrated driver, holders & including suitable LED lamp including connecting up with three core twisted flexible copper conductor cable of suitable size from ceiling rose including cutting of false ceiling in suitable size & making good the disturbed surface & matching with the existing surface complete all as specified directed.

S&F in replacement post top lantern 40 W energy saving, environmental friendly , long life aesthetically designed with good indirect symmetrical light distribution , die cast aluminum landscape IP65 luminaire with IP 65 rating with high power COB LED as light source along with its mounting accessories complete all as specified directed.

S&F in replacement Cone NXG sturdy LED bollard 8 W conical type with uniformly lit diffuser at the upper portion for landscape lighting complete with mounting on PCC cube (15x15x15 cm) along with nut bolts and its grouting complete all as specified and as directed by Engr-in-Charge.

S&F in replacement spot light fittings LED type recessed mounted aluminium body round shape ivory powder coating finished 86mm dia of capacity 7 watt complete all as specified directed.

S&F in replacement Engagement light LED type with Red and Green compartment 230 volts with LED lamp 9 watt complete all as specified directed.

S&F in replacement warm white LED light fitting suitable for mounting on photo frame consisting of 02 Nos LED candle lamp 3 watt warm white 230 volts complete all as specified directed.

S&F in replacement warm white LED light fitting suitable for mounting on photo frame consisting of 9 watt LED strip warm white 230 volts complete all as specified directed.

S&Fin replacement strip light 28 w pack of 1 (5 RM) with driver corded electric , plastic warm white suitable to give glare free lights complete all as specified and directed.

S&F in replacement hanging table lamp ceiling mounted spring type (adjustable ) warm/cool white completet all as specified and directed .

M&L in replacement ceiling secure light 14 W downlighter cool white 900 lumen complete with all accessories and all as directed by Engr-in-Charge.

Supply only in repairs LED lamp candle type 3 watt 230 volts all as specified and as directed by Engr-in-Charge.

Supply only in replacement 5 W LED coloured Adore Lamp B22 red and Green suitable for bulb holder in engage lights. Complete all as specified and as directed by Engr-in-Charge.

M&L in replacement for fixing of LED Picture lights 12W for photo frame in warm white colour in Aluminum body gold finish along with all accessories necessary to mount the lights complete all as specified directed.

M&L in replacement of wall light decorative type in matte chrome colour with material glass, metal including lamp wattage base Tornado E27, 24 W capacity. Complete all as specified and directed as per Engrin-Charge.

M&L in replacement of mirror light decorative type in two distinct elemnents can white colour body and warm white coolour including lamp wattage Candle E14, 4 Wx 2 capacity in 3 layered glass. Complete all as specified and directed as per Engrin-Charge.

Taking down of submain wiring including taking out conduit pipe of any description and of any size complete all as specified directed.

S&F in replacement of submain wiring with PVC insulated unsheathed copper conductor cable, multi stranded, single core, FRLS type, 1100 volts grade 2 x 10 sqmm complete drawn along with 1x 10 sqmm PVC insulated unsheathed copper conductor cable, multi stranded, single core, FRLS type in pvc conduit for continuous earth wire and connected to common earth dolly complete all as specified and directed. Note :- Two run of 10 sqmm copper conductor cable,one run of 10.0 sqmm copper cable and one run of PVC conduit shall be measured as one unit length.

All as per item No 24.00 here-in-before but size of cable 2 x6 sqmm complete along with cable 1x 6 sqmm FRLS type for continuous earth wire and connected to common earth dolly complete all as specified and directed. Note :- Two run of 6.0 sqmm copper conductor cable,one run of 6.0 sqmm copper cable and one run of PVC conduit shall be measured as one unit length.

All as per item No 24.00 here-in-before but size of cable 2 x 4 sqmm complete along with cable 1x4 sqmm FRLS type for continuous earth wire and connected to common earth dolly complete all as specified and directed. Note :- Two run of 4 sqmm copper conductor cable,one run of 4.0 sqmm copper cable and one run of PVC conduit shall be measured as one unit length.

All as per item No 24.00 here-in-before but size of cable 2 x 2.5 sqmm complete along with cable 1x 2.5 sqmm FRLS type for continuous earth wire and connected to common earth dolly complete all as specified and directed. Note :- Two run of 2.5 sqmm copper conductor cable,one run of 2.5 sqmm copper cable and one run of PVC conduit shall be measured as one unit length.

M&L for checking electrical points for continuous electric supply system and rectification of defects including ceiling/ exhaust fans of any size and capacity and carrying out minor repairs, fixing screws, tightening,tappingof loose wires, any type renewal of small pieces of electric wire upto 1.00 mtr length and petty work complete on all working days including holidays all as directed by Engr-in-Charge for Kashmir House (E-in-C branch ) Area. Note :- Contractors are advised to visit the sites before quoting their rates. Materials for minor and maintenance repair works as directed by Engineer-in-Charge shall be supplied by the contractor within one week from the date of issue of work order. Contractor shall provide and deploy tradesman to carry out day to day complaints and tradesman will remain present in Kashmir House E-in C branch ) area from 0830Hrs to 1800 Hrs in working day . In case of any breakdown/ emergency, contractor shall make arrangement to attend and rectify the complaints in odd hours on sunday/ holiday also. The rates quoted in sch 'A' respective items shall be deemed to be included and nothing extra shall be admissible on this account.Contractor shall be penalised @ Rs. 1000/- per complaint per day, if he fails to attend the complaint within 3 hours.

Supply only against in repairs of switch piano flush type 6 Amp, SP, one way 230 volts AC complete all as specified directed.

Supply only in repairs of switch piano flush type 16 Amp, SP, one way 230 volts AC complete all as specified directed.

Supply only in repairs of piano flush type socket out let 5 pin 6 Amp, 230 volts AC complete all as specified directed.

Supply only in repairs of piano flush type socket out let 6 pin 16 Amp, 230 volts AC complete all as specified directed.

Supply only in repairs of piano type electronic fan regulator suitable for 1200/1400 mm ceiling fan complete all as specified directed.

Supply only in repairs of bell push switch piano flush type 6 Amps, SP, 230 Volts AC complete all as specified directed.

Supply only in replacement of call bell ding dong type suitable for 230 volts AC complete all as specified directed.

Supply only in repairs of cordless bell electronic type 230 volts AC complete all as specified directed.

Supply only in repairs of remote controlled bell electronic type 230 volts AC complete all as specified directed.

Supply only in repairs of Plug Top 15 Amps, 230volts AC, 3-pin complete all as specified directed.

Supply only in repairs of Plug Top 5 Amps, 230volts AC, 3-pin complete all as specified directed.

Supply only in repairs flexible copper conductor twisted twin core PVC insulated cable of size 23/0.0076 complete all as specified directed.

Supply only in replacement of factory made concealed sheet steel distribution boards, double door, SPN, 4 way, 230 volts AC, IP 43 with suitable busbar, neutral link, earth link suitable for MCB, DP/SPN as incomer & MCB SP as outgoing complete all as specified directed.

Supply only in replacement of factory made concealed sheet steel distribution boards, double door, SPN, 8 way, 230 volts AC, IP 43 with suitable busbar, neutral link, earth link suitable for MCB, DP/SPN as incomer & MCB SP as outgoing complete all as specified directed.

Supply only in replacement of factory made concealed sheet steel distribution boards, double door, SPN, 12 way, 230 volts AC, IP 43 with suitable busbar, neutral link, earth link suitable for MCB, DP/SPN as incomer & MCB SP as outgoing complete all as specified directed.

Supply only in replacement of factory made load line DB's double door made out of CRCA mild steel sheet with insulating materials like polyester epoxy coated surface mounting 12 way TPN 415 Volts, IP 43 with suitable busbar, neutral link & earth link suitable for MCCB TP as incomer & MCB SP/TP as out going complete all as specified directed.

Supply only in replacement of factory made load line DB's double door made out of CRCA mild steel sheet with insulating materials like polyester epoxy coated surface mounting 8 way TPN 415 Volts, IP 43 with suitable busbar, neutral link & earth link suitable for MCCB TP as incomer & MCB SP/TP as out going complete all as specified directed.

Supply only in replacement of MCCB TP/TPN 125 Amp, 25kA thermal type complete all as specified directed.

Supply only in replacement of MCCB TP/TPN 160 Amp, 25kA thermal type complete all as specified directed.

Supply only in replacement of MCB SP 5-32 Amp, 10kA complete all as specified directed.

Supply only in replacement of MCB SPN 20-32 Amp, 10kA complete all as specified directed.

Supply only in replacement of MCB SPN 40-63 Amp, 10kA complete all as specified directed.

Supply only in replacement of MCB TP 25-63 Amp, 10kA complete all as specified directed.

Supply only in replacement of MCB TPN 40-100 Amp, 10kA complete all as specified directed.

Supply only in replacement of metal clad AC box complete with MCB 20 Amp, 230 volts AC complete all as specified directed.

Supply only in repairs of decorative laminated sheet 3 mm thick of size 8"x 12" including necessary cutting of sheet for fixing switch/ socket complete as specified and directed

Supply only in repairs of decorative laminated sheet 3 mm thick of size 8"x 5" including necessary cutting of sheet for fixing switch/ socket complete as specified and directed

Supply only in repairs opf decorative laminated sheet 3 mm thick of size 7"x 4" including necessary cutting of sheet for fixing switch/ socket complete as specified and directed

Supply only in repairs of decorative laminated sheet 3 mm thick of size 4"x 4" including necessary cutting of sheet for fixing switch/ socket complete as specified and directed

M & L rewinding of ceiling fan 1200 mm sweep copper wounded including greasing,cleaning of the each part completet all as specified and directed. Note :- Taking down of ceiling fan and carry to the workshop for rewinding is the contractor's responsibility.

S &f in replacement pvc body ventilation fan 230/250 mm completet all as specified and directed.

S &f in replacement pvc body ventilation fan 160 mm completet all as specified and directed.

Supply only in repairs of fan capacito upto r 2.5 Mfd complete all as specified directed.

Supply only in repairs of Mild steel 'U' clamps with rubber reel, bolts, nuts, washers and safety pin complete all as specified directed.

Supply only in repairs of Down rod 1.2 mtr height fabricated out of MS pipe 12mm dia heavy duty duly painted with two coats of white synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces complete all as specified and directed.

Supply only in repairs of Down rod 60 cm height fabricated out of MS pipe 12mm dia heavy duty duly painted with two coats of white synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces complete all as specified and directed.

Supply only in replacement PVC 3 Modular gang box with Cover plate of suitable module as approved by Engr-in-Charge

Supply only in replacement PVC 4 Modular gang box with Cover plate of suitable module as approved by Engr-in-Charge.

Supply only in replacement PVC 6 Modular gang box with Cover plate of suitable module as approved by Engr-in-Charge.

Supply only in replacement FRLS PVC insulated unsheathed single core stranded copper conductor Cable of size 1.5 sqmm LT 1100 volt grade complete all as specified directed.

Supply only in replacement FRLS PVC insulated unsheathed single core stranded copper conductor Cable of size 2.5 sqmm LT 1100 volt grade complete all as specified directed.

Supply only FRLS PVC insulated unsheathed single core stranded copper conductor Cable of size 4.0 sqmm LT 1100 volt grade complete all as specified directed.

Supply only FRLS PVC insulated unsheathed single core stranded copper conductor Cable of size 6.0 sqmm LT 1100 volt grade complete all as specified directed.

Supply only FRLS PVC insulated unsheathed multi core stranded copper conductor Cable of size 2.5 sqmm, 3Core LT 1100 volt grade complete all as specified directed.

M&L for laying of XLPE PVC sheathed armored cable 16 sqmm 4 core complete all as specified and as directed by Engr-in-Charge.

M & L Earthling complete with galvanised steel earth plate electrode, 600x600x6mm thick, buried directly in ground vertically to depth not less than 1.5 meters below normal ground level, connected to galvanised iron earthing strip 25x4mm by means of bolts, nuts, check nuts including necessary excavation and earth work (in any type of strata ) and washers of galvanised iron or steel, CGI watering pipe 20mm bore light grade with funnel and wire mesh, PCC chamber in cement concrete 1:3:6 type c1, 80mm thick pre-cast RCC 1:2:4, type B-1 cover reinforced earth plate surrounded by alternate layers of packed charcoal, salt oacked which shall not be less than 15cm in all side of earth plate complete all as shown in electrical plate No 3 of MES schedule Part-I.specified and directed by Engg-in-charge .

Supply only in replacement fastener MS 8 mm suitable for fixing heaveyduty exhaust fan /geyser/wall fan etc complete all as specified and directed

Supply only in replacement PVC MCB box PVC for MCB DP complete all as specified directed

Supply only in replacement PVC conduit 20/25 mm size complete all as specified directed.

Supply only in replacement PVC cacin capin of any size complete all as specified directed.

Supply only in replacement PVC flexible pipe 20/25 mm size complete all as specified directed.

Supply only in replacement 3 module plate and MS sunken box suitable for modular switch cocket any type complete all as specified directed.

Supply only in replacemnet 4 module plate and MS sunlen box suitable for modular switch socket any type complete all as specified directed.

Supply only in replacemnet 6 module plate and MS sunlen box suitable for modular switch socket any type complete all as specified directed.

Supply only in replacement teflon tape in red ,yellow ,black,green colour suitable to wrap over wire joints (eachset contains 4 roll of tape ) complete all as specified directed.

Supply only in replacement 6 sqmm 2 core aluminium wire complete all as specified directed.

Supply only in replacement 10 sqmm 2 core aluminium wire complete all as specified directed.

M&L for Chemical Earthing complete with Copper earth plate 90 x 60CM x 5 mm thick buried directly in ground (earth pit not less that 2.5mtr deep below ground level ) with top edge of the plate not less than 1.25mr below normal ground level connected to 50x6 mm copper strip as earthing lead by means of brazing after tighten by bolts, nuts, check nuts and washers from earth pit to test point with protection GI pipe of size 40mm dia light grade and providing masonry enclosure and watering pipe of dia 25 mm including wiremesh steel funnel, including watering arrangement 200 ltrs for each earth pit complete as specifed and directed by Engr-in-charge. Note:- Copper strip 7.5 mtr included in the quoted rate from earth pit to test point

Taking up or down old Galvanised iron or steel water tubings of following bores with all fittings from trenches/, walls/pillars,/floors /ceiling and separating serviceable tubings and set for aside reuse and removing unserviceable tubings from site complete all as specified and directed :-

Bore of tubings 50 mm

Bore of tubings 40 mm

Bore of tubings 25 mm

Bore of tubings 20 mm

Supply and laying only Steel water tubings, galvanised, medium grade with all fittings, laid in trenches in old/new position, fixed complete to walls, ceiling, post or laid in floors etc with providing necessary fixing clamps, saddles etc as required in new/old positions complete all as specified and directed of following bore of size :-

Bore of tubings 50 mm

Bore of tubings 40 mm

Bore of tubings 25 mm

Bore of tubings 20 mm

S&F gate valve of following size gun metal, heavy duty screwed on both ends with iron wheel head after taking down old existing gate valve complete all as specified and directed at site.

Bore of tubings 50 mm

Bore of tubings 40 mm

Bore of tubings 25 mm

Bore of tubings 20 mm

M & L for repair, servicing/periodical maintenance to RO Plant of capacity 50 LPH including replacement of minor spares, Pump repair, refixing the plant after repair, testing complete all as specified and directed of entire satisfactory level by Engr-in charge. Note:- (i) Charcoal and other minor accessories included in the quoted rate. (ii)Spares required shall be measured and paid under relevant items. (iii) Contractor is instructed to attend the complaint with in the three hours after lodging the complaint, Delay in attending complaints will be charged @ Rs 500/- every next day

S & F in replacement Membrane for 50 LPH RO Plant complete all as specified and directed.

S & F in replacement activated carbon filter heavy Grade for 50 LPH RO Plant complete all as specified and directed.

S & F in replacement Electrical accessories Solenoid valve for 50 LPH RO Plant complete all as specified and directed.

Supply & fix in replacement HDPE pipe 3/8"dia suitable for inlet & outlet of RO plant complete all as specified and directed.

S & F in replacement of booster pump for 50 LPH RO Plant complete all as specified and directed.

Material and labour for carryout Physical check (one mechanic and one helper) of centrifugal/submersible pump of any size & capacity, cleaning of burnt/ damage accessories if required, cleaning complete with cleaning material (Petrol/ CRC-226), tightening of all nuts, bolts all as directed and checking leakage seepage and serviceability of pipe line /gate valve and minor consumables like Petrol, CRC, Brasso etc for cleaning shall be included in the quoted rate and necessary fitting all as directed and specified Note :- (i) Gate Valves, Foot valve ,pipe line shall be measured and paid separately. (ii) Minor parts l, GI nuts, bolts, etc and cleaning materials jointing materials shall be included in quoted rates.

Material and labour for attending the breakdown in case if pipe line burst out with all accessories including machine to dig the pipe /moisture detecting machine and find out the faulty location of pipe, complaint must be attended at the same day. Note :- (i) Gate Valves, Foot valve ,pipe line shall be measured and paid separately. (ii) Minor parts l, GI nuts, bolts, etc and cleaning materials jointing materials shall be included in quoted rates. (iii) maintaining the surface as per existing standard is contractor responsibility which include laying the removed tile ,refilling the excavated material. (iv) Moisture detecting machine will be reqd at site throughout the duration of contract. (v) Contractor is instructed to attend the complaint with in the three hours after lodging the complaint, Delay in attending complaints will be charged @ Rs 500/- every next day.

S&F in replacement Non return valve heavy duty of the following size /dia ISI marked including flange joints and minor consumables like Petrol, CRC, Brasso etc for cleaning shall be included in the quoted rate of following sizes complete all as specified and directed :-

Bore of tubings 50 mm

Bore of tubings 40 mm

Bore of tubings 25 mm

Bore of tubings 20 mm

Servicing of Dosing pump of capacity 1250 ltr cap hooper ,motor driven .5 hp ,1440 rpm 415 v dosing rate 25 LPH including leakage check. winding of motor ,greasing ,replacement of ss faster, PVC pipes and other connecting accessories complete all as specified and directed .Note : dosing pump must be functional always so servicing and overhauling of the pump is essential and keeping it functional 24x7 is contractor responsibility and delay in the services will be fined @ Rs 600/- per day.

M&L for caging RO plant of cross section 12x8x8 ft made of mesh type iron sheet including opening of pure filtered watr outlets and provision of trat /stand made of SS metal fabrication of caging includes all the welding and patch of work if it is necessary .fixng of caging to the floor using cement and marking a cubical caging using welding and sholdering complete all as specified and directed

M&L for Cleaning of RCC under ground Sump of capacity upto 20,000 ltrs by cleaning walls and floors of tank by wire brushing and gunny bags, etc removing all scales, dust, pit dirt and mud, removing outside and carryout two coats of white wash on external exposed concrete/ plastered surface and inside surfaces all as specific and directed by Engineer-in-Charge.

M & L for caging of pump house of cross section 14x8x8 ft made of mesh type iron sheet including gate made of SS metal to enter the pump operator ,fabrication of caging includes all the welding ,fixing the metalic shet into the floor fermly and filling the sharp edges at the corner to avoid the injury to the living things and any other ceemnt work if it is necessary completet all as specified and directed

Supply & fixed in repairs Ball valve, high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball, screwed for the following size complete all as specified and directed :-

25 mm bore GI pipe.

20 mm bore GI pipe.

M & L in replacement PVC Flat sheathed with plain copper conductor 3 core submersible cable of 6.0 SQ mm including taking down old U/S material complete all as specified and directed.

M&L for caging of submercible pumpbase to avoid contact of any living thing of cross section 3x3x3 ft made of mesh type iron sheet caging includes all the welding and patch of work if it is necessary .fixing of caging to the floor using cement and making a cubical caging using welding and sholdering complete all as specified and directed

M & L in replacement of Star delta starter 7.5 HP in steel sheet enclosure type starter suitable for 5/7.5 HP pump set complete (motor rating 415 Volts 50 Hz, 3 Phase) including taking down old U/S material complete all as specified and directed.

M&L for Re-winding of electric motor of capacity 3 HP with copper super enamelled winding wire of same gauge with class H Insulation after taking out burnt winding from stator and cleaning slots etc, varnishing, drying reassembling, testing complete all as specified and directed by Engr-in-Charge.

S&F in replacement of galvanised steel tubes heavy grade of size 40 mm bore both side duly welded flange in a standard length of three metre or any length as in borewell vertically installed including nuts, bolts, washers & packing complete all as specified and directed.

M&L for lifting of submersible pump along with lowering column pipes with flanges by disconnecting nut bolts and opening motor from pump complete all as specified and as directed.

M&L for lowering of submersible pump along with lowering column pipes with flanges by fixing nut bolts of suitable size and assembling motor and pump complete all as specified and as directed.

M & L in replacement pump unit only of a mono block pump suitable for 7.5 HP motor 3 phase 415 v,50hz made of CI,MS,SS head range 28-44 ,discharge 10.3-4.7 size (suc x del) 65x65 mm power 5.5 kw protection IP 55 complete all as specified and directed .Note testing certificate must be submitted after installation ,installation of new unit and taking out the old unit is the responsibility of contractor only.

M&L for fixing cover plate /cap made of iron for the submercible outlet of dia 11 inch cover mudt be made in such a way that 40/50 mm pipe must pass through it so there should be a circular hole in the center of the cover welding and fabrication must be needed while fitting the cover

M&L for Development of Existing tube well with compressed air and after that cleaning of water with 25% extra capacity submersible pump by pumping muddy water complete all as specified and directed.

Testing of tube well water from recognised laboratory for potability of water for drinking/other purposes. Checking of PH value ,TDS value, content of iron and other harmful metals complete all as specified directed.

Supply and fixing of Monkey menace protection device with PVC spikes and connected accessories nut bolt size as per sample, complete all as specified and directed.

Supply only in replacement socket to connect GI pipe of the following sizes complete all as specified and directed.

Bore of tubings 50 mm

Bore of tubings 40 mm

Bore of tubings 25 mm

Bore of tubings 20 mm

Supply only in replacement union for GI pipe of the following sizes

Bore of tubings 50 mm

Bore of tubings 40 mm

Bore of tubings 25 mm

Bore of tubings 20 mm

Supply only in replacement nipple for GI pipe of the following sizes

Bore of tubings 50 mm

Bore of tubings 40 mm

Bore of tubings 25 mm

Bore of tubings 20 mm

Supply only in replacement reducer socket for Gi pipe of the following sizes

Bore of tubings 50/40 mm

Bore of tubings 40/25 mm

Bore of tubings 25/20mm

Bore of tubings 40/20 mm

Bore of tubing 20/15 mm

Supply only in replacement GI plug of the following sizes

Bore of tubings 50 mm

Bore of tubings 40 mm

Bore of tubings 25 mm

Bore of tubings 20 mm

Supply only in replacement T socket for Gi pipe of the following sizes

Bore of tubings 50 mm

Bore of tubings 40 mm

Bore of tubings 25 mm

Bore of tubings 20 mm

Supply only in replacement elbow for GI pipe of the following sizes

Bore of tubings 50 mm

Bore of tubings 40 mm

Bore of tubings 25 mm

Bore of tubings 20 mm

Servicing /overhauling /rewinding of fountain pump 0.75 Hp includes cleaning of all nozzles with a chemical to remove the junk and smooth flow of water ,replacing minor accessories bush, nut bolts, suction pipes cleaning the surrounding of the fountain-base complete all as specified and directed (after every 3 months)

S & F in replacement Membrane for 150 LPH RO Plant complete all as specified and directed.

S & F in replacement activated carbon filter heavy Grade for 150 LPH RO Plant complete all as specified and directed.

S & F in replacement Electrical accessories Solenoid valve for 150 LPH RO Plant complete all as specified and directed.

S & F in replacement of booster pump for 150 LPH RO Plant complete all as specified and directed.

Excavation in trenches in any type of soil not exceeding 1.5 mtr wide and not exceeding 1.5 mtrin depth for laying of lt under ground cable GI pipe completet all as specified

Returning filling including spreading ,leveling watering and well ramming in layers not exceeding 25 cm thick in any tyepe of soil completet all as specified

Removing excavated materials to a distance not esceeding 50mtr and deposing where directed at a level not exceeding 1.5 mtr above the starting point and making good surface of desturbed at site all as specfied

servicing of centrifugal pump set of capacity 7.5 HP of make /model by taking out U/S spares by dismantling disconnecting the electric connection from motor and LT panel,opening centrifugal pump and motor set from foundation and carrying to local work shop for repair and replacement of spares complete and refixing after repair ,testing complete including transportation charges from site to work shop and minor consumables like petrol ,CRC,Brasso etc for cleaning shall be included in the quoted rate completet all as specified and directed by engr in charge

Spply only in replacement Gun metal neck ring center for motor capacity upto 7.5 HP

Supply only in replacement GM side neck ring for motor capacity upto 7.5 HP

supply only in replacement tyre coupling complete with base plate .nut bolt.wsher etc of existing size /type for pump capacity upyo 7.5 HP

Supply only in replacement ball bearing for mptor upyo 7.5 HP as per sample

Supply only in replacement SS pump shaft for pump upto 7.5 HP including lathe work

Supply only in replacement gland packing champion for pump upto 7.5 HP

Supply only in replacement set of gasket for pump upto 7.5 HP

Supply only in replacement set of O ring for pump upto 7.5 HP

Supply only in replacement impellr key for pump upto 7.5 HP

M&L for taking down pump from motor from the base plate by unscrewing all the nuts bolts and rewinding of electric motor of capacity 7.5 HP with copper super enameleld winding wire of same gauge with class H insulation after taking out burnt winding from stator and cleaning slots etc ,varnishing ,drying reassembling ,testing and minor consumables like petrol CRC brasso etc for cleaning shall be included in the quoted rate complete all as specified and dierected

M & L for painting motor pump /dosing pump and putting the danger board at the pump house gate made of iron screwed to the gate by nut bolts /screw pench complete all as specified and directed.

M/s Adhikari construction co.

SANJEEV ENTERPRISES

ASHUTOSH BUILDERS