Kit for Devp and fabr of Hydraulic boom based light

Boom lifting rating at 0 degree should be 3 Ton at 3.2 mtrs, 1.5 Ton at 4.25 mts, 0.75 Ton at 5.25 mtrs, Boom lifting rating at 30 degree should be 4 Ton at 3.2 mtrs, 2 Ton at 4.25 mts, 1 Ton at 5.25 mtrs, Boom lifting rating at 0 degree should be 7.5 Ton at 3.2 mtrs, 4 Ton at 4.25 mts 2.5 Ton at 5.25 mtrs, Boom working angle minimum Zero to maximum 60 degree, Rotation 240 degree, Reach off rear of tail board at 0 degree retracted 600mm and extended 2.1 mtrs, Working Height at 60 degree Retracted 5.25 mtrs min and height extended 6.45 min, Working radius at 60 degree retracted 1.65 mtrs and extended 2.35 mtrs, Working radius at 0 degree retracted 5.25 mtrs, Crane hook outreach (Rear of vehicle) 1800 mm from the rear, Boom rotation Minimum 240 degrees, crane hook outreach (sides of vehicle) Minimum 240 (120 degrees on each side) 2500mm, Lifting Hooks 360 degree swiveling type for angular pulls with self-locking provisions, Boom controls -to be placed on both Driver and Passenger Side Proportional Controls for operating with Left and right Up and down Telescopic in-out Winch in-out Op of out-triggers boom movements, Operating Temperature minus 30 to 50 degree Celsius.

Winch pulling capacity 12Tons, Winch Lift capacity 7 tons, both winch locked together), Winch Type Suitable worm reduction, Cable specs 14mmx40 mts 6X36IWRC 1960N/mm2, Spring cable tensioners To be provided, Winching Speed 3 mtr per min at 7.5 ton, Operating Temperature Minus 30 to 50 degree Celsius

Side Outrigger Maximum Spread 4.1 m, Outrigger Maximum Ground Penetration 250mm, Additional modifications for outriggers assembly, Outrigger Integrated Folding Spades, Outrigger D- Rings with Manual Locking Pins Platform Tubular Structure, Dimensions as per boom mounting according to chassis Longitudinal members

Rear Outriggers Penetration 250mm, Additional modifications for outriggers assembly, Outrigger Integrated Folding Spades, Outrigger D Rings with Manual Locking Pins

Material 16 Gauge MS Sheet, Dimensions min 2500mm x 300 x 400 each

F24, 10S wireless radio portable remote console with 10 button single speed for remote operation

3 to 4 LPM capacity Hand manual pump to lower the load, slewing and collapsing the crane and putting all assemblies like outriggers back to stowage position

Pressure sensor based Audio, Visual Device (AVD) to give alarm at 90 percentage of the crane capacity

Upper and Lower Hook-Up Lights, LED Wrecker Boom Work Light, 01 x foldable, man pack stretcher for casualty evacuation, 2 as to 1 tackle layout Kit to incl 01 x Ground Anchor, 10 anchor pin, 01 x ground pin extractor, Working jackets 04 Nos, Fluorescent cones 04 Nos, 01 x Seamless tube Towing Hitch Assy

450 Kg Front bumper, Material Mild steel block, Dimension 2200 mm x 150mm x 150 mm