SPECIAL REPAIR OF OFFRS MD ACCN BLDG NO. P-11/1 TO P-11/4 AND P-12/1 TO P-12/4 AT KHETARPAL ENCLAVE AT SURATGARH MILITARY STATION

Amount

Taking down wooden / PVC chowkat or frame with shutters (including fittings & fixtures) area not exc 1.5 Sqm each (without taking off the shutters from the frame) including cutting holes for hold fasts & making good disturbed surfaces complete all as specified and as directed.

Taking down wooden chowkat or frame with shutters (including fittings & fixtures) area exc 1.5 Sqm but not exc 4 Sqm each (without taking off the shutters from the frame) including cutting holes for hold fasts & making good disturbed surfaces complete all as specified and as directed.

Resecuring Or easing without taking down chowkat or frame with shutters (including fittings & fixtures) area exc 1.5 Sqm but not exc 4 Sqm each complete all as specified and as directed.

S&F factory made pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, made out of mild steel sheet of 1.25 mm thickness, complete as specified & as directed.

S&F factory made pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, made out of mild steel sheet of 1.25 mm thickness, complete as specified & as directed.

M&L for PCC 1:3:6 type C1 (using 20mm graded crushed stone aggregate) as in filling up chowkat/frame hollows for hold fasts and similar works complete all as specified and as directed.

Supply and fixing factory made 35 mm thick plain framed, paneled shutter (any number of panels) with lock rail and panel of 9mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces, size of rail and styles as per IS : 1003 (Part-I), kiln seasoned and chemically pressure treated using second class Hard Wood (Hollock/Bonsum) rail and styles, fixed to chowkat, complete all as specified & as directed.

Supply and fixing factory made 35mm thick glazed and skeleton shutters made of second class hard wood (Hollock/Bonsum), open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in clause 8.24(a) of Section 8 in SSR Part-I, kiln seasoned and chemically pressure treated, fixed to chowkat, complete all as specified & as directed. (Notes for Srl item Nos 7.00 & 8.00 here-in-before: - 1.The contractor may use/provide Ist class hard wood “ Black SHISHAM” for manufacturing of factory made shutters in lieu of IInd class hard wood without any extra cost to the govt.2. The shutters shall be procured from any of the approved manufacturers from the list given in as per Appendix “B”. 3. Wire clothing & glazing will be measured & paid for separately.)

S&F galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staple complete all as specified & as directed.

M&L for cutting holes in brick walls built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or PCC 1:2:4 type B1 using 20mm graded crushed stone aggregate as required, exc. Half brick thick (Depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall) complete all as specified & as directed.

Dismantling of boarding, any description fixed in any position with nails complete all as specified and as directed.

M&L Block boards 19 / 20mm thick, grade 2 quality, interior grade, decorative type with decorative face veneer on one face, fixed with screw to timer as in pelmet/shelves frame work with teakwood lipping 6 mm thick complete all as specified & as directed.

S&F Second class Hard Wood (SAL/Black shisham) Plain solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified & as directed.

S&F 25mm thick solid core flush shutters solid core construction with block board core and plywood face panels commercial type on both side with leeping 2nd class hard wood (Hollock/Bonsum) all round complete all as specified & as directed.

S&F continuous (piano) hinges, mild steel, bright finish or electro galvanized width of flaps 30mm (when open) fixed with CP steel screws complete all as specified & as directed.

S&F 40mm dia cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with plain colour single piece extruded PVC profile ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour single piece extruded PVC profile for top rail lock rail bottom rail on either side and as gap insert for Top rail and bottom rail paneling of plain colour PVC sheet to fitted on the MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and joined together with solvent cement, fixing in the frame at site as per specification & drawing complete all as specified and as directed.

S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour single piece extruded PVC profile reinforced with MS square tube in opening as per specifications & drawing complete all as specified and as directed..

S&F 150 mm long extruded aluminium alloy anodised handles fabricated type complete all as specified.

S&F 200 mm long aluminium anodized barrel tower bolts of extruded section (ISI marked) complete all as specified.

S&F butt hinges of size 75mm extruded aluminium alloy with galvanized mild steel hinge pin, anodized type C-21 complete all as specified.

S&F 200 mm long mild steel barrel tower bolts, stove enameled black with bright bolts and fixed complete all as specified.

S&F 300 mm long mild steel sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, stove enameled black, with bright bolt not less than 12mm dia and including a minimum of 06 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete, all as specified.

S&F mild steel pressed handle, 150 mm size, oval type, stove enameled black complete all as specified.

S&F 2nd class hard wood (Hollock/Bonsum) small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labours articles n exc 200 cu. cm each

S&F butt hinges of size 100mm medium weight, cold rolled mild steel (ISI marked) including welding to angle iron frame where required complete all as specified and as directed.

S&F in repair mild steel helical door spring 300mm ordinary rat tail rod pattern spring including roller and roller plate, welded to steel frame, including making suitable cut out in wall and making good in CM 1:4 complete all as specified & directed.

S&F in repair fancy type curtain rod 25mm dia with brakcet, knobs,rings @10cm c/c etc complete all as specified & directed.

Taking down steel windows/ventilators of any description and of any type with or without guard bars and making good the disturbed portion complete all as specified.

S & F Factory made steel windows with side hung shutters including box type hinges with steel handle of MS flat 25x5mm and 2 Nos steel tower bolts, 100mm long fixed to shutter complete with and including glazing bars, dovetailed or welded and also including painting the exposed steel surfaces with one shop coat of red oxide Zinc-Chromate primer complete all as specified and as directed by Engineer-in-Charge.

Ditto- all as per SI No 30.00 here-in-before but without glazing bars complete all as specified and as directed by Engineer-in-Charge.

S & F Factory made steel ventilators with top hung shutter including hung ,fixed type with glazing bars, dovetailed or welded and also including painting the exposed steel surfaces with one shop coat of Zinc-chromate primer complete all as specified and as directed by Engineer-in-Charge. Notes for srl item Nos 30.00 to 32.00 here-in-above :- (a) Steel windows/ventilators shall be of sizes to suit the size of opening at site and as ordered/directed by GE. (b) Steel windows/ventilators shall be factory made and shall be procured from one of the manufacturers as per Appendix ‘B’. (c) Steel windows/ventilators shall be conforming to IS-1038 and all as specified in these tender documents and MES Schedule Part-I. (d). The lugs of the steel windows/ventilators shall be fixed in P.C.C. blocks made of PCC 1:3:6 type C-1 using 20mm graded stone aggregate. Size of PCC blocks shall be 23cm x 10 cm x 15 cm. (e) Cost of providing all the above aspects including the cost of lugs & P.C.C. blocks shall be deemed to be included in unit rate quoted for above item. Cost of making good the jambs to match with the adjoining surfaces shall be deemed to be included in the rates quoted for taking down items.

S&F Mild steel round bars as in window guard bars incl necessary welding and a shop coat of zinc primer conforming to Grade Fe-310-O or Fe -410-O), complete all as specified & directed.

M&L preparation of new steel and iron surfaces (alreay applied with coat of primer) of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint on existing primer complete all as specified.

M&L for preparation of new surfaces of wood or wood based materials of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of pink primer complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete all as specified and as directed.

M&L for glazed ceramic tiles (coloured) 450mm x 350mm x 7-8mm thick on vertical surfaces such as dado, skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick rendering (as screed bed) in cement & sand mortar 1:4 complete all as specified and as directed

Demolition of stone slabs and tiles of any description or thickness in floors, platform, aprons etc ,laid, bedded and pointed in any mortar complete all as specified & as directed.

M&L for 16 to 18mm thick Granite (black granite) slab as in flooring, platform etc, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match with shade of Granite stone including cutting, grinding and polishing (mirror polish i.e. full granite polish as per local trade practice) over & including 20mm thick screed bed (bedding layer) in CM 1:4 all as specified & directed.

Demolition of plain cement concrete in ground floor and pavings not exc 15 cm thick (below or above ground level) including floor tiles of any description complete all as specified.

Material and labour for vitrified light shade ceramic tiles (coloured) 10mm thick (square/rectangular) area of each tile exceeding not exceeding 0.36 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and as directed.

Material and labour for vitrified light shade ceramic tiles (coloured) 10mm thick (square/rectangular) area of each tile exceeding not exceeding 0.36 sqm as in vertical surfaces like dado or skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick rendering (as screed bed) in cement & sand mortar 1:3 complete all as specified and as directed.

Material and labour for Non-skid ceramic tiles (coloured) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and as directed.

Material and labour for Non-skid ceramic tiles (coloured) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as vertical surfaces like dado or skirting,, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:4 complete all as specified and as directed.

Material and labour for Non-skid ceramic tiles (coloured) 400mm x 400mmx 7mm thick as in floor, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick screed bed in cement & sand mortar 1:4 complete all as specified and as directed.

Demolition of cement concrete in sunken portion and floor complete all as specified & as directed.

M&L rendering 12mm thick in cement mortar 1:4 on fair faces of sunken portion with neeru finish complete all as specified.

M&L for PCC 1:7:12 type E2 using 40 mm graded brick aggregate as mass concrete in surroundings of WC seats / Sunken portion and similar works, all as specified & directed.

Supply only Liquid water proofing compound (ISI marked) complete all as specified.

S&F in repair sinks single bowl made of Stainless steel 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe over RCC slab including bedding in cement mortar to dwarf wall and filling cantilever brackets and connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm complete all as specified & as directed.

Taking down existing steel rolling shutter of size not exc 10 Sqm with all connecting items and repair the lath, hood covers, ball bearings, helical wire spring, lock plates, bracket plates, shaft rods, guide channels of steel rolling shutters and locking arrangements, including greasing, tightening, oiling, welding etc. wherever required, complete to make in serviceable condition and refixing in the same opening and testing for smooth & trouble free functioning and applying one coat of synthetic enamel paint including preparation of old painted surfaces complete all as specified and as directed.

Hacking out old broken glass any thickness, size, quality or description from metal frame including punching or drilling out old glazing pins/spring clips complete all as specified and as directed.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane including painting / oiling to new putty to match with the existing/new surfaces, complete all as specified and as directed.

S&F 4mm thick figured glass pin head type and glazing with oil putty in square not exc 0.5 sqm in each pane including painting / oiling to new putty to match with the existing/new surfaces, complete all as specified & as directed.

M&L 40mm thick PCC 1:2:4 type B1 using 20mm graded crushed stone aggregate as in flooring, finished even and smooth with using extra cement complete all as specified & as directed.

M&L 50mm thick PCC 1:3:6 type C1 using 20mm graded crushed stone aggregate as laid in alternate bays, each bay not exceeding 2.5 length with joint to be filled with Bituminous mastic filling in plinth protection etc complete all as specified & as directed.

Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc complete all as specified and as directed.

M&L for rendering 10mm thick in cement mortar 1:6 on fair faces of brick masonry or concrete surfaces of walls, finished even & smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15mm thick in cement mortar 1:4 in two layer first shall be 10mm and second layer shall be 5mm thick with water proofing compound to brick/concrete wall surfaces trowelled to even & smoth without using extra cement complete all as specified.

M&L for rendering 5mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement complete all as specified.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil emulsion distemper (OBD) of approved shade/tint over a coat of cement base putty complete all as specified & as directed.

M&L for preparation of newly plastered surfaces of ceilings & applying three coats of white wash complete all as specified.

M&L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint of approved shade/tint over a coat of priming paint complete all as specified.

S&F vitreous china squatting pan (Orissa pattern) water closet (white) of size 580x440mm with integral foot rests, long arm ‘P’ or ‘S’ trap, including connection to trap and flushing pipe, antisyphonage pipe etc including provision of setting pan in lime concrete (1:2:5) at least 25cm around and finished just below the rim, fixed in repairs, complete all as specified.

S&F in repairs vitreous china wash down water closet pan (Pedestal pattern), white, including connection to drain (or outgoing pipe) and to flushing pipe, anti-sypohonage pipe etc., with plastic WC seat cover (white) closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device, Jet spray (brass chromium plated of butterfly shape) with 1.00m PTMT tube suitable for 15 mm bore GI pipe with PTMT nut & nipple, complete all as specified & as directed.

S&F in repairs stainless steel Kitchen plate rack of overall size 750mm x 600mm x 300mm, (ISI marked) with partitions for small/large plates etc, made out of 1.00mm stainless steel sheet, fixed with rawl plug and CP steel screws complete all as specified and as directed.

S&F in repairs vitreous china wash hand basin, white, flat back of size 550mm x 400mm with & including a pair of cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10x7.5x15cm, 32 mm dia PVC waste pipe and 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, (excluding tap, waste chain & plug), complete all as specified & as directed.

S&F in repairs PVC valveless symphonic action type low level flushing cistern (ISI marked) of 10 litre capacity including 32 mm dia PVC flush pipe connected to water closet with inlet, ball valve, float and handle complete all as specified & as directed. alent in makes mentioned in Appendix 'B' here-in-after.

S&F in repairs 600mm x 450mm bevelled edge mirror with wooden beading covered back with commercial ply 6mm thick and fixed on wooden plug with chromium plated brass screws and cup washer complete all as specified.

Taking up or down steel water tubing and connections of 15mm bore, fixed in walls, ceiling, floors, trenches etc. complete all as specified and as directed.

M&L for galvanized steel water tubing medium grade of 15mm bore (ISI marked) with & including all fittings laid in trenches, floors, etc complete all as specified and as directed. Note :- Excavation & earthwork shall be measured & paid for separately.

Laying only, jointing and testing old serviceable galvanized steel water tubing medium grade of 15mm bore obtained serviceable vide serial item No. 70.00 here-in-before including cleaning the pipe from inside & outside properly including rust & mud removal, with & including new fittings and fixed to walls and ceilings or laid in floors in new or old position complete all as specified and as directed. (Note : The quoted rate shall deemed to include new GI fittings (ISI marked). Old fittings shall not be used.)

Taking up or down steel water tubing and connections of 20mm bore, fixed in walls, ceiling, floors, trenches etc. complete all as specified and as directed.

M&L for galvanized steel water tubing medium grade of 20mm bore (ISI marked) with & including all fittings laid in trenches, floors, etc complete all as specified and as directed. (Note :- Excavation & earthwork shall be measured & paid for separately.)

Laying only, jointing and testing old serviceable galvanized steel water tubing medium grade of 20mm bore obtained serviceable vide serial item No. 73.00 here-in-before including cleaning the pipe from inside & outside properly including rust & mud removal, with & including new fittings and fixed to walls and ceilings or laid in floors in new or old position complete all as specified and as directed. Note : The quoted rate shall deemed to include new GI fittings (ISI marked). Old fittings shall not be used.

S&F Bib tap suitable for 15 mm bore pipe, chromium plated copper alloy with crutch or butterfly handle, screwed down, both ends screwed for iron pipe or for unions and fixed, fixed in repairs, complete all as specified.

S&F stop valve, fancy type chromium plated concealed type with long shank, screwed down, high pressure with capstan head, screwed both ends for iron pipe or for unions and fixed suitable for 15mm bore pipe, fixed in repairs, complete all as specified.

S&F shower rose cast brass chromium plated fancy type 125mm long with swivel joint screwed suitable for 15mm bore GI Pipe or union and fixed, fixed in repairs, complete all as specified.

S&F in repairs 15mm bore Angle stop valve, fancy type with long shank and cup of cast copper alloy chromium plated, screwed down, high pressure with capstan heads, screwed both ends for iron pipe or for union complete all as specified and as directed.

S&F Bib tap suitable for 15 mm bore pipe, fancy type, chromium plated copper alloy with crutch or butterfly handle, screwed down, both ends screwed for iron pipe or for unions and fixed, fixed in repairs, complete all as specified and as directed.

S&F in repairs 15mm bore Stop valve, fancy type with long shank and cup (concealed type) of cast copper alloy chromium plated, screwed down, high pressure with capstan heads, screwed both ends for iron pipe or for union complete all as specified and as directed.

S&F in repairs brass chromium plated wall mixer with a point for shower for mixing hot & cold water screwed down for iron pipe of 15mm bore complete all as specified and as directed.

S&F in repairs brass chromium plated mixer for WHB for mixing hot & cold water screwed down for iron pipe of 15mm bore complete all as specified and as directed.

S&F in repairs brass chromium plated wall mixer for kitchen for mixing hot & cold water screwed down for iron pipe of 15mm bore complete all as specified and as directed.

S&F in repairs CP hand faucet with chromium plated chord complete all as specified and as directed.

S&F in repairs CP towel rail 600mm long fixed with CP screws complete all as specified and as directed.

S&F in repairs CP towel rail 200mm long fixed with CP screws complete all as specified and as directed.

S&F in repair Waste fittings 32/40 mm dia brass chromium plated for glazed ware sinks, basins, etc, with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified.

S&F in repair Waste pipe PVC 32/28 mm dia suitable for urinal and wash basin and kitchen sink complete all as specified.

S&F 15mm bore pillar tap, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks & fly nuts, screwed for iron pipes, fixed in repairs complete all as specified and as directed.

S&F for Door Seal rubber etc complete all as specified and as directed.

S&F in repairs toilet cabinet with mirror of size 600x450x200mm make Commander/parag as per sample approved complete all as specified & as directed.

Demolition of reinforced cement concrete of any descraption and any position such as in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work (reinforcement cut as required to facilitate demolition) all as specified & as directed

M&L Providing reinforced cement concrete type B-1, 1:2:4 (20 mm graded aggregate) as in slab supported on walls, beams and columns in floors, roofs, landing as like complete all as specified & as directed.

M&L for mild steel TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally or hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified & as directed.

Dismantling water tank capacity exc 250 ltr but n.exc 500 ltr complete all as specified & as directed.

S & F Rotational moulded polyethylene water storage tanks of 500 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc complete all as specified and as directed by Engineer-in-Charge. ( Note:- (i) The water storage tanks shall be 3 layers white, HDPE tanks moulded to seam-less perfection of rotational moulding process. The tanks shall be manufactured only from FDA approved special grade of polyethylene and shall be certified fit for potable water. Also refer paras 18.60 and 18.60 A of MES Schedule Part-I.(iii) Payment for inlet, outlet and over flow pipes separately.However cost of providing necessary fittings such as nipples with check nuts for inlet and outlet pipes,plug with check nut for over flow pipe and Ball valve of suitable size as per actual requirements and as directed by the Engineer-in-Charge shall be deemed to be included in the unit rate of this item.(iv) HDPE storage tanks shall be procured from the manufacturers as per Appendix “B”.)

S&F Ball valve of size 20mm dia with brass rod and polythene float of size 100mm ball and fly nut, fixed in repairs, complete all as specified and as directed.

S&F stop valve suitable for 20mm bore pipe, cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed, fixed in repairs, complete all as specified.

Dismantling of cast iron work of any description and any position omplete all as specified and as directed. ( Note :- CI pipe & fitting shall be measured as per actual weight retrieved. The proof of way of weight shall be kept on record & entered in MB.)

Supply and fixing 100 mm bore cast iron, spun, spigot & socket, soil, waste & vent pipe (ISI marked, IS-3989), in any length with or without ears fixed with cement joints, laid in trenches or floors complete all as specified. .

Supply and fixing 75 mm bore cast iron, spun, soil, waste & vent pipe (ISI marked, IS-3989), in any length with or without ears fixed with cement joints, fixed to walls complete all as specified.

S&F 100mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) fitted with oval access door complete all as specified & as directed.

S&F 75mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) fitted with oval access door complete all as specified & as directed.

S&F 100mm bore cast iron bend (any radius) with duck’s foot or heel rest fitted with oval access door complete all as specified & as directed.

S&F 100mm bore cast iron branch piece, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access door complete all as specified & as directed.

S&F in repairs cast iron Nahani trap of 75 mm bore, with grating including jointing to waste pipe, fixed in cement concrete type B1 (1:2:4) complete all as specified & as directed.

S&F in repairs Grating doom 100 mm dia with waste hole of PTMT. (Minimum weight 25gms), complete all as specified and as directed

Taking down eaves gutter or RWP of any description incl all fittings complete all as specified & as directed.

S&F for 110mm dia PVC rain water pipe single socket with rubber joint, jointed with solvent joint fixed to wall solvent joint complete all as specified and as directed.

M&L for 110 mm dia PVC bend any radius complete all as specified and as directed.

M&L for preparation of old decorated surfaces of walls by washing, rubbing down and stopping of distempered surfaces and applying two coat of oil emulsion distemper (OBD) of approved shade/tint over a coat chalk whitening complete all as specified & as directed.

M&L for complete removal of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered surfaces and applying two coats of cement base paint of approved shade/tint over a coat of alkali resistant priming paint on walls all as specified and as directed.

M&L for preparation of old surfaces (plastered or unplastered) of walls including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying two coat of white wash complete all as specified & as directed.

M&L for preparation of old surfaces (plastered or unplastered) of ceilings including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying two coat of white wash complete all as specified & as directed.

M&L for preparation of old painted steel and iron surfaces of any description over 10 cm in width or girth and applying two coat of synthetic enamel paint of approved tint over one coat of primer affter complee removal existing treatment by scraping older treatment complete all as specified & as directed.

M&L for preparation of old painted surfaces of wood and wood based material of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint of approved tint over one coat of primer after scraping older treatment with primer paint complete all as specified & as directed.

Dismantling of roof tiles or terracing tiles any type size & thickness single layer on roofs, complete all as specified and as directed

Demolition of mud phuska in roof any thickness including plastering & leeping (whether full thickness removed or only part thereof) complete all as specified and as directed.

M&L 15mm thick screed bed for laying brick tiles on roof mixed with water proofing compound as per manufacture's instruction in CM (1:4) complete all as specified and as directed. (Note:- water proofing compound shall be measured and paid for separately as supply only under respective item here in before.)

M&L for applying evenly a tack coat of industrial bitumen 85/25 grade at the rate of 1.20 Kg per sqm including cleaning surfaces, complete all as specified & as directed. (Note :- Treament shall also be provided over side walls/parpetsup to a height of 300mm above RCC roof slab. )

M&L for 40mm thick brick tiles, joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement, laid on roof over & including 20mm thick screed bed in cement & sand mortar 1:6, complete all as specified & as directed.

M&L 40mm thick PCC 1:2:4 type B1 using 20mm graded crushed stone aggregate, levelling coarse as in roof complete all as specified & as directed.

M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) laid on primed surface by forced application conforming to as per manufacturer’s instructions. Notes :- (I )Treament shall also be provided over side walls/parpetsup to a height of 300mm above RCC roof slab. ) (i) Sunken slab including inner sides up to finished floor level shall be thoroughly wire brushed and cleaned before applying primer. (ii) While laying the membrane over lap of minimum 75mm shall be provided. (iii) Make of APP modified water proofing membrane – STP/Hyper Plas. (iv) The net area of water proofing treatment shall be measured without any extra allowance for laps which shall be deemed included in the quoted rates.

Hacking for Key raking out of old brick tills and scrubbing down with water etc on roof surface built in cement mortar (1:3) mixed with 5% of crude oil by weight of cement, in patches complete all as specified & as directed

M&L for cement concrete 1:2:4 type B1, using 20mm graded crushed stone aggregate as in coping, benching and bed blocks etc including weathering, slightly rounded, chamfered angle and throating as directed including use and waste of form work (straight or curved) all exposed surface of concrete finished fair complete all as specified & as directed.

S&F in repair PVC connection 450 mm long suitable for 15 mm bore GI pipe including PTMT nuts on both sides complete all as specified.

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

M&L for brick work with old size burnt clay sub-class ‘B’ bricks, straight or curved on plan exc 6.00 metre mean radius, built in cement mortar 1:6 complete all as specified and as directed. Note : Brick work under this item shall be carried out in sewage disposal work (i.e. manholes) and area drainage work (i.e. drains).

S&F in repairs Toilet Paper holder vitreous china fixed to wall with chromium plated brass screws complete all as specified & as directed..

Roughing of existing RCC chajja/facing of window, making good by providing necessary formwork extra corrodid/damaged. TMTsteel bar as per existing dia & spacing as required and cement concrete 1:2:4 type B-1 using 20mm grade stone aggregate including finishing the RCC chajja with CM (1:4) of area not exceeding 1.00 Sqm etc complete all as specified & as directed.

M&L for preparation of new steel and iron surfaces of any description n. exc 10 cm in width or girth when unconnected with other painting or when painted in different tint and applying two coats of synthetic enamel paint of approved tint over a coat of red oxide, zinc chrome primer complete all as specified & as directed.

Supply and fixing in repair Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples complete all as specified and as directed.

M&L for preparation of new surface and mix with cment and water in the ratio 1:1.5 by volume using DR FIXIT PRDICRETE URP chemical on floor and vertical surface of sunken floor as per Manufacture' s instruction complete all as specified and as directed. ( Note: Supply only of Liquid water proofing compound ISI marked measured & paid separetely under which item complete all as specified and as directed.

Taking down carefully existing unserviceable/perished surface conduit/concealed conduit/batten/casing caping aluminium point wiring any type for light, fan, bell, socket, power point etc complete including all fixtures and fittings such as batten/conduit/casing caping, switches, sockets, ceiling rose, pendent holder, lamp holders, bracket holders, light fittings, top sheet covers, fan regulators, wooden boxes, MS sunken boxes, etc and making good the disturbed surfaces of wall, floors, ceiling, etc to match with the adjoining surfaces, complete all as specified and as directed.

M&L for point wiring for one light/fan/bell/buzzer point controlled by one, one way switch with 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade (ISI marked) including 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade (ISI marked) as continuous earth wire in green colour to common earth and connected to earth dolly laid/drawn into and including non-metallic rigid PVC concealed conduit (medium duty, ISI marked, not less than 20mm dia) with all fittings such as tee, bends, junction boxes, junction covers, etc all as per IS, terminated in & including new sunk type pressed steel terminal boxes (made out of 1.6mm thick MS sheet) concealed in wall for mounting fittings like switches, sockets, regulators etc with and including suitable size modular plates sheet top cover fixed with brass screws & cup washers, complete all as specified and as directed. (Note : (i) Cost of cutting/leaving forming chases for conduits, sinking for boxes and making good in CM 1:3 shall deemed to be included in quoted rate of this item. (ii) Point wiring shall be suitable to modular fittings/fixures.)

All as per serial item No. 136 here-in-before but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on same board with other switches.

All as per serial item No. 136 here-in-before but for one 3 pin 5/6 Amp socket outlet controlled by one 5 Amp switch on independent board.

All as per serial item No. 136 here-in-before but for one light point controlled by two, two way switches.

All as per serial item No. 136 here-in-before but for one 3/5 pin 6/16 Amps one switch socket combination outlet controlled by one 6/16 Amps switch on independent board with 2.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade (ISI marked) including 2.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade (ISI marked) as continuous earth wire in green colour.

S&F Modular Switch , one way, 16 Amp, 1 Module, 230 Volts, ISI marked, complete all as specified and as directed.

S&F Modular Socket , 1 in 5pin, 6/ 16 Amp, combined 2 Module, 230 Volts, ISI marked, complete all as specified and as directed.

S&F Modular Switch , one way, 6 Amp, 1 Module, 230 Volts, ISI marked, complete all as specified and as directed.

S&F Modular Switch , two way, 6 Amp, 1 Module. 230 Volts, ISI marked, complete all as specified and as directed.

S&F Modular socket outlet, 3 pin, 5 Amp combined, 230 Volts, ISI marked, complete all as specified and as directed.

S&F Modular socket outlet, 2/3 pin, 6 Amp combined, 230 Volts, ISI marked, on same board complete all as specified and as directed.

S&F Modular electronic fan regulator, stepped type with 5 step control, 230 Volts, 120 Watt, 2 Module and connecting up, ISI marked, complete all as specified and as directed.

M&L for taking down carefully existing serviceable exhaust fan of any sweep and re-fixing the same after proper cleaning, oiling and connecting up with and including 3 core sheathed flexible copper cable 1.5 sqmm of suitable length upto ceiling rose, complete all as specified and as directed.

Supply and fixing Bell ‘Ding Dong’ / ‘Multi Music’ Type, AC, 230 Volts, ISI marked, complete all as specified and as directed.

S&F Modular Bell Push, 6 Amp,1 module 230 Volts, ISI marked, complete all as specified and as directed.

S&F lamp holder, PVC/Polycarbonate insulated body with back plate suitable for conduit/casing caping/batten fittings, ISI marked, complete all as specified and as directed.

S&F ceiling rose, PVC/Polycarbonate insulated body, 65mmx50mm with three terminals, ISI marked, complete all as specified and as directed.

Supply and fixing in repair flush mounting factory made Ekinoxe TPN DB 8 way, 240 Volt, Double door, IP-43 protection, IK-09 with metal door with 200 Amps copper bus bar, with neutral bar, earth bar and cables ties for cable management fully insulated bus bar complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in repair flush mounting factory made Ekinoxe SPN DB 8 way, 240 Volt, Double door, IP-43 protection, IK-09 with metal door with 200 Amps copper bus bar, with neutral bar, earth bar and cables ties for cable management fully insulated bus bar complete all as specified and as directed by Engineer-in-Charge. Make : Legrand Cat Part No. 507611 or equivalent in makes mentioned in Appendix 'B' here-in-after.

S&F MCB, 100 Amps, TPN, 240 Volts, 10 kA, ‘C’ Curve, with over load and short circuit protection, fixed in repairs, complete all as specified and as directed.

S&F MCB, 32 Amps, SPN, 240 Volts, 10 kA, ‘C’ Curve, with over load and short circuit protection, fixed in repairs, complete all as specified and as directed.

S&F MCB, 6 to 32 Amps, SP, 240 Volts, 10 kA, ‘C’ Curve and short circuit protection, fixed in repairs, complete all as specified and as directed. Make : Legrand Cat Part No. 408663 or equivalent in makes mentioned in Appendix 'B' here-in-after.

Material and labour for earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m deep below normal ground level and connected to and including galvanized iron earth wire 4 mm dia by means of GI nuts, bolts, check nuts, washers thimbles, etc as shown in electrical plate No 3 of SSR Part-I and connection to main switch board/Test point/panel/equipment and testing on completion including excavation and earth work in any type of soil, returning filling in, and removal of surplus spoil to a distance not exc 50 metre, charcoal and salt in alternate layer 15 cm thick all around the earth plate electrode, MS funnel with wire mesh, GI pipe medium grade 20 mm bore for watering and 15 mm bore 7.50 metre long GI pipe light grade for earth wire protection fixed with poles with two clamps, made from MS flat 25 mmx3mm, bolts, nuts and washers, PCC chamber (1:3:6) type C1, 40 mm thick RCC pit cover, etc complete all as specified & as directed including dismantling & taking out old existing unserviceable earthing. Note : PCC chamber shall be constructed at least 1.5 mtr away from the earth electrode and pipe for watering shall be provided in slanting manner.

S&F in replacement bulk head energy efficient LED light fitting, 1x10 Watt, 230 Volts, surface mounted, comprising of high brightness LEDs, IP-65 protection, with & including all standard accessories, prewired and connecting up with & including 3 core sheathed flexible copper cable 1.5 sqmm of suitable length upto light point/ceiling rose including removing of old existed fitting, complete all as specified and as directed. Make : Havells Cat Part No. RUGBYNEONFT10WLED760SSMBOPC or Crompton Model No BHE-10-CDL or Phillips Model No WT202W LED6 NW PSU S2 PC or equivalent in makes mentioned in Appendix ‘B’ here-in-after.

S&F in replacement energy efficient decorative ultra slim LED light fitting, 1x18 Watt, CCT-6500k 230 Volts, Day Cool light, batten type with driver & polycarbonate housing including tube rod and all accessories, prewired and connecting up with & including 3 core sheathed flexible copper cable 1.5 sqmm of suitable length upto light point/ceiling rose including removing of old existed fitting, complete all as specified and as directed. Make : Havells Cat Part No. LUMILINEBS18WLED865SPCWH or equivalent in makes mentioned in Appendix 'B' here-in-after.

S&F in replacement Square LED fitting 12W, 6500K Lumen output with Opal type & polycarbonate diffuser including lamp and all accessories, prewired and connecting up with & including 3 core sheathed flexible copper cable 1.5 sqmm of suitable length upto light point/ceiling rose including removing of old existed fitting, complete all as specified and as directed.

S&F energy efficient decorative ultra slim LED light fitting (mirror Light), 1x10 Watt , 230 Volts, Day Cool light, batten type with driver & polycarbonate housing including lamp and all accessories, prewired and connecting up with & including 3 core sheathed flexible copper cable 1.5 sqmm of suitable length upto light point/ceiling rose including removing of old existed fitting, complete all as specified and as directed. Make : Havells Cat Part No. ENDURALINEARNEOBS10WLED865SPCWH or equivalent in makes mentioned in Appendix 'B' here-in-after.

Supply and fixing 12W LED Lamp white for normal holder complete all as specified and as directed by Engineer-in-Charge.

Supply, installation, commissioning & testing in repair Light Bldg light fitting, 30 Watt with & including LED lamp, housing made up of LM6 pressure die cast aluminium alloy with effective thermal management, sturdiness, monolithic construction, totally enclosed, dust and water proof, minimum system efficiency of more than 100 lumens per watt and a minimum system lumen output of not less than 2500 lumens, correlated colour temperature shall be minimum 5700 degree Kelvin, Colour Rendering Index (CRI) shall not be less than 70, fitting shall be designed for a system life of 50,000 hours @ 70% lumen maintenance, ingress protection of IP-65 (minimum), mechanical impact resistance rating of IK ≥ 07, operating voltage range 140 V to 270 V, AC, frequency 50-60Hz, potted type for humming free operation, driver shall withstand upto 400 V for 08 hours, surge protection not less than 10 KV, Power factor > 0.95, Total Harmonic Distortion (THD) shall be less than 15%, double phase protection, no load, open circuit and short circuit protection, suitable for ambient temperature from (-)10°C to 50°C and humidity level 10% to 90% RH, cool white colour and lamp starting time shall not be more than 10 second, PMMA/polycarbonate/toughened glass heat resistant cover, prewired and connecting up ceiling rose with & including 2.5 Sqmm 3 core PVC insulated, weather proof, multistranded copper conductor cable of 1100 Volt grade (ISI marked), complete all as specified and as directed. Make : Syska Cat Part No. SSK-SLG-CF-30W equivalent in makes mentioned in Appendix 'B' here-in-after.

NOTES FOR LED LIGHT FITTINGS ( Item No. 159 to 164 of BOQ ): (i) All LED light/luminare shall meet the provision laid down in IS - 16101, 16102 Part-I/II, 16103 Part-I, 16104, 16105, 16106, 16108/2012 and 15885 Part -II / Section 13. (ii) Contractor shall submit test report of LED street light fitting from Government accredited test laboratory for LM-79 and LM-80. (iii) Contractor has to furnish a replacement warranty of 05 years for LED light fittings complete including lamps from the date of completion of contract. The product will be replaced free of cost in the following case :- (a) Manufacturing defects. (b) Failure due to mechanical and electrical impact. (c) Drop in lumen (or lux at 1 m) below 90% of claimed values of lumen (or lux at 1 m) of the LED /Luminaries.

Supply and fixing mounting bracket (suitable for fixing/holding street/security light fittings) made of 40mm bore GI pipe ‘light grade’ not less than 1.50m long, bent to shape at required angle, fixed to Pole/wall with & including mild steel clamps (02 Nos) made out of flat iron 50x6mm with nuts, bolts & washers, matching with section of Pole/suitable for wall, fixed in repairs, complete all as specified and as directed.

Supply and fixing in repairs Sheet metal Enclosure Plug and socket type DB (functional unit) 20 Amps capacity with provision of single pole and neutral enclosure with earth plug and top plug complete with one single pole 20 Amps MCB, 10 kA, ‘C’ Curve type, grouted flush to wall complete all as specified and as directed.

M&L for sub main wiring with two runs of 6 sqmm (nominal area) size main cable & one run of 6 sqmm size earth continuity conductor, single core, PVC insulated, unsheathed, FRLS with multi-stranded copper conductor, 1100 Volts grade, ISI marked cables, drawn through & including suitable size of heavy duty non-metallic rigid PVC concealed conduit ISI marked not less than 25mm dia & conduit fittings/accessories, fixed concealed in wall/ceiling complete including dismantling & taking down old unserviceable sub main wiring. Notes :- (i) 02 runs of 6 sqmm size main cable, 01 run of 6 sqmm size earth continuity conductor cable & conduit with accessories shall be measured as one run length for payment purpose. (ii) Cost of cutting/leaving forming chases for conduits and making good in CM 1:4 shall deemed to be included in quoted rate of this item.

M&L for dismantling & taking down carefully existing functional electronic energy meters (Single Phase - 04 Nos) from panel and fixinf in New panel with testing, and supply & fixing new SMC multi meter box of size 650mm x 450mm x 150mm for mounting of electronic energy meters (Single Phase 04 Nos), single hinged door, shockproof, rustproof, cable entry from bottom, 100% weatherproof, pole mounting arrangement, tamper proof, pilferage proof, fire retardant Class FV-0 as per IS-11731 Part-II or V-0 as per UL-94, high heat distortion temperature (200°C as per IS-10192) and re-fixing the electronic energy meters (Single Phase - 04 Nos) & making connections complete all as specified & as directed. Make :- Sintex (Product Code No. GSMB-6545) or equivalent in HPL / Secure / Indo Asian/Crompton Greaves.

Supply, laying, jointing and testing LT XLPE insulated screened, PVC bedded, galvanised steel strip or wire armoured heavy duty electric cable with aluminium stranded conductor 1100 Volt grade cross sectional area 25 sqmm 4 core conferming to IS-7098 ( Part-I 1988) laid in trenches/ducts, through pipe, under floors or roads/ along poles etc complete all as specified including dismantling & taking out old unserviceable cable. Notes :- (i) Sand cushioning, cable protection, GI protection pipe, clamps, jointing kits and excavation & earth work shall be measured & paid for separately. (ii) Road cutting/floor cutting /cutting holes etc in walls required for laying/fixing of cable etc shall be made good as per existing. Nothing extra shall be admissible on this account. Quoted rates shall be inclusive of the above provisions.

Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth or n exc 10 sqm on plan for foundation, poles, struts, stays etc. or laying underground cable and getting out in soft/loos soil including taking out old brick or precast cover complete all as specified and as directed by Engineer-in-Charge..

Returning, filling in approved soft/loose soil including spreading, leveling, watering and well ramming in layers each n.exc 25cm complete all as specified and as directed by Engineer-in-Charge.

Removing surplus soil to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and as directed by Engineer-in-Charge.

M&L for dry sand (Local Tibba sand) and punning for cushioning and cover for protection of under ground electric cable complete all as specified and as directed. Notes :- (i) Approved local Tibba dry sand free from vegetations, grass and other deleterious substances shall be used. (ii) For the purpose of payment, only punned thickness shall be measured.

M&L for sub class ‘B’ (old size) burnt clay bricks laid flat and dry abutting each other with gap between adjacent bricks not exc. 10mm for protection of underground electric cable in such a way that the length of brick is at right angle to the central axis of cable complete all as specified and as directed.

M&L for Galvanized iron tubing, 40mm bore light grade, ISI marked, including all fittings and laid in trenches/under road/drains, fixed to poles/walls with required size of flat iron (25mmx3mm) clamps, bolts, nuts and washers for protection of LT electric cable complete including taking down old unserviceable pipe with clamps. Note :- Excavation & earthwork shall be measured & paid for separately.

AK CONSTRUCTION

Gupta Suppliers

GARG ENTERPRISES

M/s JUGAL KISHORE MISHRA AND SONS

PACHR BUILDERS

VYAS CONSTRUCTION COMPANY

R B Infrabuilders

PAREEK AND COMPANY